MCMark Del Campo

Mark Del Campo

*This is an algorithmically generated author record based on publicly available information.

Mark Del Campo has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Gallium Complexes of Tetradentate Formazanate Ligands: Synthesis, Property Benchmarking, and Radiolabeling

    by Suhjung Chun, Erika L. Fuller, Lihai Yu, Paul D. Boyle, Mark Del Campo, Leonard G. Luyt, Joe B. Gilroy

    Main group complexes of formazanate ligands, most commonly boron, have emerged as readily accessible dyes with applications throughout the materials and health sciences on account of their unique optoelectronic and redox properties and biocompatibility. Despite these advances, gallium formazanate complexes have received limited attention. In this study, we report the synthesis of a variety of six-coordinate gallium complexes supported by tetradentate formazanate ligands and benchmark their optoelectronic/redox properties with a variety of axial ligands (water, DMAP, DMSO, acetate). DFT calculations support our findings and provide insight into the labile nature of the axial ligands based on modest fluoride ion affinities calculated for the gallium formazanate core. Finally, we demonstrate the potential of tetradentate formazanate ligands as chelators for radioactive 68Ga with radiolabeling occurring at room temperature in just 15 min and set the stage for the future development of these and related compounds as positron emission tomography (PET) imaging agents and theranostics.

  • Open Access

    Modulating the Electronic Properties of Conductive Conjugated Coordination Polymers with Atomic-Level Precision

    by Hyuk-Jun Noh, Doran L. Pennington, Mark Del Campo, Christopher H. Hendon, Katherine A. Mirica

    Conductive metal–organic frameworks and conjugated coordination polymers (CCPs) are promising platforms for low-power electronics and sustainable energy technologies, yet charge-transport design rules remain elusive. In diamine-based frameworks, Cu-coordinated motifs exhibit electrical conductivities several orders of magnitude lower than those of their Ni analogs, but the origin of this disparity has remained unclear, complicating rational selection of earth-abundant metal nodes for multifunctional materials. Here, we report the synthesis and atomic-resolution characterization of Cu-TABQ, a diamine-based CCP grown as single-crystals from tetraamino-p-benzoquinone and copper ions. Microcrystal electron diffraction reveals a distorted pseudosquare-planar Cu-coordination with asymmetric imine bonding, electron localization, and a structural model consistent with possible local protonation/hydrogen bonding. In contrast, Ni-TABQ adopts a planar, symmetric coordination environment that supports charge delocalization and near-metallic transport. Density functional theory suggests that protonation stabilizes the distorted Cu-TABQ structure and suppresses charge transport. Together, these results support an atomic-level explanation for metal-dependent transport in diamine-based frameworks and establish the metal–ligand coordination environment and protonation as tunable handles for designing conductive frameworks.

  • Open Access

    Investigation of cyanometallate coordination polymers with tetraamines for carbon capture

    by Gabriele G Wehrle, Connor Kremer, William Berecz, Brianna Mandarino, Mark DelCampo, Jennifer N Murphy

    Research into carbon capture, utilisation, and storage (CCUS) from point sources and the atmosphere is essential for reducing greenhouse gas emissions and limiting the increase in global average temperature to well below 2 °C above pre-industrial levels. Cyanometallate (CM) coordination polymers (CPs) containing tetraamine ligands share structural similarities with some of the most effective metal–organic frameworks for carbon capture; however, their potential for CO 2 adsorption remains largely unexplored. To address this gap, we synthesised a series of CM CPs using ferrocyanide and tetracyanonickelate (TCNi) building blocks with 1,2-bis(3-aminopropylamino)ethane (323) incorporated directly into the coordination network through a scalable, one-pot, room-temperature synthesis. Single-crystal x-ray diffraction of Ni-323-Fe II revealed a new two-dimensional CP in which the 323 ligand coordinates to Ni centres in both facial ( fac ) and meridional ( mer ) configurations. Incorporation of the 323 ligand into the coordination network was further confirmed by infrared (IR) spectroscopy through characteristic vibrational bands. Under pure CO 2 , the ferrocyanide materials Ni-323-Fe II and Zn–Fe II -323 adsorbed 2.29 and 3.00 g CO 2 per 100 g of material, respectively. In the TCNi series, Co–Ni-323 exhibited a higher CO 2 uptake (2.36 g per 100 g) than Cu–Ni-323 (1.84 g per 100 g). Adsorption–desorption cycling of Cu–Ni-323 and Zn–Fe II -323 demonstrated stable performance over ten cycles. Interestingly, under atmospheric conditions, Zn–Fe II -323 consistently adsorbed 2.44–2.65 g of gas per 100 g of material over ten cycles. However, additional studies are required to determine the identity of the adsorbed gas. This work demonstrates a simple, scalable, and environmentally friendly route to CM CPs using aqueous, room-temperature synthesis while highlighting the challenges associated with CO 2 adsorption when tetraamine ligands are coordinated to metal centres. These findings provide valuable insight into the design of cyanometallate CPs for carbon capture applications.

  • Open Access

    Solvent-Directed Phase Control in Disulfide-Linked Metal–Organic Frameworks Revealed by Microcrystal Electron Diffraction

    by Patrick F. Strobel, Lucas Laventure, Priyanshu Chandra, Mark Del Campo, Pierre LeMagueres, Lauren Aheran, Jing Jin, Nathan J. Oldenhuis, David Punihaole, Aylin Aykanat

    Precise control over phase, topology, and reactivity in metal–organic frameworks (MOFs) is critical for translating chemical responsiveness into predictable function. Disulfide-linked coordination networks are attractive flexible materials, yet their strong sensitivity to synthesis conditions has hindered mechanistic understanding of how the structure governs reactivity. Here, we achieve phase control in a zinc disulfide MOF system by tuning solvent coordination and water activity, enabling access to a microcrystalline open-pore structure (Zn-MOF-α) and a dense, topologically distinct isomer (Zn-MOF-β) from the same disulfide linker. Microcrystal electron diffraction (MicroED) studies determined both structures directly from micro- and nanocrystalline particles, revealing distinct secondary building units (SBUs), connectivity, and pore architecture. Systematic solvent studies identify water as a driver of α → β transformation, while the reverse transformation (β → α) is accessible in solutions of N,N-dimethylformamide in water (DMF/H2O). Time-resolved experiments reveal a clear time and solvent dependence between the α- and β-phases, supporting distinct assembly pathways. By correlating topology, morphology, Brunauer–Emmett–Teller (BET), thermal gravimetric analysis (TGA), and spectroscopic signatures including electron paramagnetic resonance (EPR), we show that the open α-framework provides higher sulfur-centered radical populations and lower thermal robustness relative to the dense β-phase. Together, these results provide design rules for predictable phase outcomes and topology-dependent disulfide activation in flexible MOFs, enabling rational control of structure–function relationships in responsive porous materials.

  • Solvent-Dependent Relative Stability of Crystal Forms

    by Manasa Yerragunta, Alejandro C. Veliz, Rohith Pulluri, Mark Del Campo, Xudong Guan, Jeffrey D. Rimer, Gül H. Zerze, Peter G. Vekilov


  • Open Access

    Cation Identity Matters: Thermodynamics of Sodium- vs. Proton-Coupled Electron Transfer Reactions on Ti-oxo Nodes of the Metal–Organic Framework, Ti-MIL-125

    by Anne Martin, Andres Alejo, Nazmiye Gokce Altincekic, Mark Del Campo, Nobuyuki Yamamoto, Miguel Liuzzi-Vaamonde, Nishya Mohamed Raseek, John Peters, Hyunho Noh

    Charge transfer reactions like Na-coupled electron transfer (Na-CET) at solid-liquid interfaces are fundamental to energy storage devices and beyond. Yet, thermodynamic parameters of charge transfer reactions beyond proton-coupled electron transfer (PCET) reactions are rare in the literature. Here, we report the successful derivation of Na-CET thermodynamics by employing redox-active and colloidally stable Ti-based metal–organic framework (MOF), Ti-MIL-125. We and others have previously demonstrated that the Ti8(μ2-O)8(μ2-OH)4 nodes of this MOF undergo reversible Na-CET and PCET reactions with equimolar amounts of electrons and the charge-balancing cations (H+’s or Na+’s). UV-Vis spectra of the colloidal Ti-MIL-125 with sequential titrations of reductants and Na+ revealed that 6-7 Na+/e- pairs are added per Ti8 nodes of the MOF. Furthermore, the apparent ‘adsorption-desorption’ thermodynamics of these Na+/e- pairs follow what is expected for the Frumkin isotherm with a net repulsive interaction. The strength of this repulsive interaction was quantified and was observed to exhibit an empirical linear trend with respect to the reducing strength of the reductants. The derivation of these Frumkin isotherms yielded the reaction free energy of Na-CET. Combining this free energy with the reduction free energy of Na+ resulted in the free energy to add Na atoms to the Ti8 nodes that are averaged over the number of transferred electrons, ΔGNa/n. Notably, this thermochemical value is closely related to bond dissociation free energies (BDFEs), which are readily employed to predict the reaction free energies of covalent bond formation/breakage. Similarly, this parameter is intrinsically correlated to the chemical properties of Ti-MIL-125 in Na-CET and fundamentally describes its viability as, for example, a candidate electrode in Na-ion batteries. Thus, we advocate that ΔGNa/n should become the cornerstone for designing energy storage devices. Implications of the presented findings are contrasted to PCET reactions of the same MOF, as well as TiO2 and other metal oxides that undergo charge-transfer reactions.

  • Open Access

    Photochemical PCO-Group Transfer Provides P-Analogues of Beta-Lactams

    by Duleeka Wannipurage, Justin Kendrick, Guilherme Berto, Matthew Figgins, Richard Thompson, Mark Del Campo, David Powers

    Strategies to introduce phosphorus directly to hydrocarbon feedstocks would streamline the synthesis of organophosphorus compounds. Here, we demonstrate [2+2] cycloaddition between a pincer-supported nickel-phosphaethynolate (Ni–PCO) complex and olefins to afford oxophosphetanes, which are P-analogues of beta-lactams. The products are characterized by a suite of methods including multinuclear NMR spectroscopy supported by isotopic labeling experiments and micro-ED. A closed synthetic cycle for PCO-group transfer is demonstrated using TMS–PCO to liberate the P-heterocycle from Ni (TMS = trimethylsilyl). These results introduce a non-canonical reactivity mode for M–PCO complexes and broaden the available toolkit to incorporate phosphorus in hydrocarbon feeds.

  • Controlled Growth and Interconversion of Photoluminescent Metal–Organic Frameworks under High-Concentration Conditions

    by Tristan A. Pitt, David C. Bain, Mark Del Campo, Andrew J. Musser, Phillip J. Milner

    A major drawback to the implementation of metal-organic frameworks (MOFs) on scale is the vast quantity of organic solvents, typically N,N-dimethylformamide (DMF), required to synthesize even small quantities of MOF under traditional dilute (~ 0.01 M) solvothermal conditions. High-concentration solvothermal methods offer the opportunity to synthesize MOFs with minimal solvent use but are currently limited by a lack of understanding of how dynamic self-assembly operates under these conditions. Herein, we systematically investigate the crystallization of a series of MOFs under variable concentration (0.01-0.2 M) and temperature (80-160 °C) conditions based on the dilute synthesis of the canonical framework Mg2(dobdc) (dobdc4- = 2,5-dioxido-1,4-terephthalate). Through this analysis, we identify controlling factors that lead to isolation of the highly photoluminescent phases Mg(DHT)(DMF)2 (DHT = dihydroxyterephthalate) and CORN-MOF-1 (Mg) (CORN = Cornell University) or Mg2(dobdc). Ultimately, we connect the preference for specific MOF phases to the extent of acid-catalyzed DMF hydrolysis and the competing influences of dimethylamine (Me2NH) and formate (HCO2 -) at high concentrations, which is likewise affected by temperature, pH, and solvent composition. We use the insights gained to synthesize Fe, Co, Ni, and Zn analogs of CORN-MOF-1 for the first time, as well as a second series of related MOFs, CORN-MOF-6 (M) (M = Mg, Mn, Fe, Co, Ni), based on the linker 2-hydroxyterephthalic acid (H3hbdc). Both series exhibit tunable luminescence properties based on the metal composition and crystal structure, making them potentially useful materials for optoelectronic applications. Overall, this work contributes to a clearer understanding of the factors that control MOF formation under high-concentration conditions.


  • Open Access

    N-Oxide Coordination to Mn(III) Chloride

    by Ananya Saju, Matthew R. Crawley, Samantha N. MacMillan, Pierre Le Magueres, Mark Del Campo, David C. Lacy

    We report on the synthesis and characterization of Mn(III) chloride (MnIIICl3) complexes coordinated with N-oxide ylide ligands, namely trimethyl-N-oxide (Me3NO) and pyridine-N-oxide (PyNO). The compounds are reactive and, while isolable in the solid-state at room temperature, readily decompose into Mn(II). For example, “[MnIIICl3(ONMe3)n]” decomposes into the 2D polymeric network compound complex salt [MnII(µ-Cl)3MnII(µ-ONMe3)]n[MnII(µ-Cl)3]n·(Me3NO·HCl)3n (4). The reaction of MnIIICl3 with PyNO forms varied Mn(III) compounds with PyNO coordination and these react with hexamethylbenzene (HMB) to form the chlorinated organic product 1-cloromethyl-2,3,4,5,6-pentamethylbenzene (8). In contrast to N-oxide coordination to Mn(III), the reaction between [MnIIICl3(OPPh3)2] and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) resulted in electron transfer-forming d5 manganate of the [TEMPO] cation instead of TEMPO–Mn(III) adducts. The reactivity affected by N-oxide coordination is discussed through comparisons with other L–MnIIICl3 complexes within the context of reduction potential.


  • Open Access

    N-oxide Coordination to Mn(III) Chloride

    by Ananya Saju, Mathew R. Crawley, Samantha N. MacMillan, Pierre Le Magueres, Mark Del Campo, David C. Lacy

    We report the synthesis and characterization of Mn(III) chloride (MnIIICl3) complexes coordinated with N-oxide ylide ligands, namely trimethyl-N-oxide (Me3NO) and pyridine-N-oxide (PyNO). The compounds are reactive and, while isolable in the solid-state at room temperature, readily decompose into Mn(II). For example, “[MnIIICl3(ONMe3)n]” decomposes into the 2D polymeric network compound complex salt [MnII(µ-Cl)3MnII(µ-ONMe3)]n[MnII(µ-Cl)3]n•(Me3NO•HCl)n (4). The reaction of MnIIICl3 with PyNO forms varied Mn(III) compounds with PyNO coordination and these react with hexamethylbenzene (HMB) to form the chlorinated organic product 1-cloromethyl-2,3,4,5,6-pentamethylbenzene (8). In contrast to N-oxide coordination to Mn(III), the reaction between [MnIIICl3(OPPh3)2] and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) resulted in electron transfer forming d5 manganate of the [TEMPO] cation instead of TEMPO–Mn(III) adducts. The reactivity affected by N-oxide coordination is discussed through comparisons with other L–MnIIICl3 complexes within the context of reduction potential.