Francesco Lestini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francesco Lestini has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Gaetano Marrocco
University of Rome Tor Vergata
11 shared publications - Cecilia Occhiuzzi
University of Rome Tor Vergata
10 shared publications - Alessandro DiCarlofelice
Department of Industrial and Information Engineering and Economics, University of LAquila, LAquila, Italy
2 shared publications - Francesca Maria Chiara Nanni
Department of Civil Engineering and Computer Science Engineering, Tor Vergata University of Rome, Rome, Italy
2 shared publications - Piero Tognolatti
Department of Industrial and Information Engineering and Economics, University of LAquila, LAquila, Italy
2 shared publications Alessio Mostaccio
Pervasive Electromagnetics Lab, Department of Civil Engineering and Computer Science Engineering, University of Rome Tor Vergata, Rome, Italy
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1035-1042
Experimental Evaluation of Passive RFID Control Scalability Using a 400-Varactor Reconfigurable FSS
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1035-1042
Open AccessExperimental Evaluation of Passive RFID Control Scalability Using a 400-Varactor Reconfigurable FSS
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1007-1014
Voltage Stability of Passive RFID Control Nodes Under EPC Gen2 Modulated Powering
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1007-1014
Voltage Stability of Passive RFID Control Nodes Under EPC Gen2 Modulated Powering
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1-10
Modeling and Design of RFID-Controlled Binary-Reconfigurable Frequency Selective Surfaces
Radiofrequency Identification (RFID) technology is entering its third generation, extending beyond identification and sensing toward the control of electromagnetic (EM) functions. Recent studies have demonstrated the feasibility of RFID-controlled antennas, metasurfaces, and intelligent surfaces, where standard RFID Integrated Circuits (ICs) act as wireless, battery-free controllers. Within this family, Frequency Selective Surfaces (FSSs) represent a particularly demanding case, since their narrowband resonant response must be precisely engineered under the discrete bias conditions imposed by RFID hardware. This paper presents a modeling and synthesis framework for binary-reconfigurable FSSs driven by RFID ICs. By exploiting the two programmable output voltages of commercial chips, the proposed FSS toggles between reflective and transparent states at a fixed frequency, enabling wirelessly programmable interfaces without any external supply. A semi-analytical Equivalent Circuit Model (ECM) links the target specifications—operating frequency and fractional bandwidth—to the lumped circuit parameters and, in turn, to the unit-cell geometry. The model provides a rapid and physically interpretable design tool, validated through full-wave simulations of multiple layouts showing agreement within 5% of numerical results.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 10, 1-10
Modeling and Design of RFID-Controlled Binary-Reconfigurable Frequency Selective Surfaces
Radiofrequency Identification (RFID) technology is entering its third generation, extending beyond identification and sensing toward the control of electromagnetic (EM) functions. Recent studies have demonstrated the feasibility of RFID-controlled antennas, metasurfaces, and intelligent surfaces, where standard RFID Integrated Circuits (ICs) act as wireless, battery-free controllers. Within this family, Frequency Selective Surfaces (FSSs) represent a particularly demanding case, since their narrowband resonant response must be precisely engineered under the discrete bias conditions imposed by RFID hardware. This paper presents a modeling and synthesis framework for binary-reconfigurable FSSs driven by RFID ICs. By exploiting the two programmable output voltages of commercial chips, the proposed FSS toggles between reflective and transparent states at a fixed frequency, enabling wirelessly programmable interfaces without any external supply. A semi-analytical Equivalent Circuit Model (ECM) links the target specifications—operating frequency and fractional bandwidth—to the lumped circuit parameters and, in turn, to the unit-cell geometry. The model provides a rapid and physically interpretable design tool, validated through full-wave simulations of multiple layouts showing agreement within 5% of numerical results.
- 10 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1883-1892
An RFID-Based Guided Control Node for Batteryless Reconfigurable RF Architectures
This article introduces a passive reconfiguration strategy for RF networks based on radio frequency identification (RFID) integrated circuits (ICs) embedded within guided-wave structures. Each RFID IC is repurposed as a batteryless, addressable dc voltage source capable of biasing RF components, such as varactors and GaAs switches. Unlike conventional over-the-air (OTA) architectures, the proposed approach eliminates tag antennas by integrating the ICs directly into microwave transmission lines, where power, control, and signal share the same RF path. A dedicated multichip test platform is developed to experimentally characterize the IC behavior in this novel configuration, evaluating impedance variation, activation thresholds, and output stability. Measurements on a commercial RFID chip demonstrate reliable operation with only −15 dBm of incident RF power, and sufficient dc output to drive over 1000 GaAs SPST switches or 10 000 varactors. To validate the concept, a fully passive, four-element monopole array operating at 900 MHz is demonstrated, where each element is gated by an RFID-controlled SPST switch. The array performs beam steering through selective element activation, using a single RF feed to simultaneously energize the array, power the ICs, and transmit EPC Gen2 control commands.
- 10 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1883-1892
An RFID-Based Guided Control Node for Batteryless Reconfigurable RF Architectures
This article introduces a passive reconfiguration strategy for RF networks based on radio frequency identification (RFID) integrated circuits (ICs) embedded within guided-wave structures. Each RFID IC is repurposed as a batteryless, addressable dc voltage source capable of biasing RF components, such as varactors and GaAs switches. Unlike conventional over-the-air (OTA) architectures, the proposed approach eliminates tag antennas by integrating the ICs directly into microwave transmission lines, where power, control, and signal share the same RF path. A dedicated multichip test platform is developed to experimentally characterize the IC behavior in this novel configuration, evaluating impedance variation, activation thresholds, and output stability. Measurements on a commercial RFID chip demonstrate reliable operation with only −15 dBm of incident RF power, and sufficient dc output to drive over 1000 GaAs SPST switches or 10 000 varactors. To validate the concept, a fully passive, four-element monopole array operating at 900 MHz is demonstrated, where each element is gated by an RFID-controlled SPST switch. The array performs beam steering through selective element activation, using a single RF feed to simultaneously energize the array, power the ICs, and transmit EPC Gen2 control commands.
- 17 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (1) , 14-24
Passive Wireless Programmable FSS for Adaptive Electromagnetic Shielding of Implanted Medical Devices
Implantable Medical Devices (IMDs) such as pacemakers and defibrillators increasingly rely on wireless connectivity for remote monitoring and programming. However, this wireless access introduces significant cybersecurity and physical vulnerabilities, making IMDs susceptible to unauthorized access and electromagnetic interference (EMI). This paper proposes a wirelessly programmable smart shield based on a reconfigurable Frequency Selective Surface (P-FSS) as a novel defense mechanism for IMD security. The shield dynamically transitions between shielding and transparency states, passively controlled by an RFID-powered circuit, ensuring protection from malicious attacks while enabling authorized medical communication. This study extends prior theoretical investigations by introducing a fully functional prototype, realized with a rigorous design methodology and leveraging low-power varactor-based switching to enhance efficiency and miniaturize the size. The system demonstrates over 40 dB of shielding effectiveness in the Medical Implant Communication Service (MICS) band (401–406 MHz) while allowing controlled transparency via a battery-less RFID interface with an activation distance of 0.6 m. Experimental validation confirms the practical feasibility of the proposed approach, making it a viable solution for enhancing the cyber-physical security of IMDs.
- 17 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (1) , 14-24
Passive Wireless Programmable FSS for Adaptive Electromagnetic Shielding of Implanted Medical Devices
Implantable Medical Devices (IMDs) such as pacemakers and defibrillators increasingly rely on wireless connectivity for remote monitoring and programming. However, this wireless access introduces significant cybersecurity and physical vulnerabilities, making IMDs susceptible to unauthorized access and electromagnetic interference (EMI). This paper proposes a wirelessly programmable smart shield based on a reconfigurable Frequency Selective Surface (P-FSS) as a novel defense mechanism for IMD security. The shield dynamically transitions between shielding and transparency states, passively controlled by an RFID-powered circuit, ensuring protection from malicious attacks while enabling authorized medical communication. This study extends prior theoretical investigations by introducing a fully functional prototype, realized with a rigorous design methodology and leveraging low-power varactor-based switching to enhance efficiency and miniaturize the size. The system demonstrates over 40 dB of shielding effectiveness in the Medical Implant Communication Service (MICS) band (401–406 MHz) while allowing controlled transparency via a battery-less RFID interface with an activation distance of 0.6 m. Experimental validation confirms the practical feasibility of the proposed approach, making it a viable solution for enhancing the cyber-physical security of IMDs.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 67 (4) , 55-66
Cyberprostheses: How to turn medical implants into wireless data generators for Health Care 4.0. [Bioelectromagnetics]
The evolution of prosthetics has been significantly shaped by advancements in biomedical engineering and state-of-the-art technologies. A notable breakthrough in this domain is the emergence of wireless implantable devices, representing a transformative shift in implant design and functionality. These prostheses aim to restore lost functionalities and seamlessly integrate with the human body, offering therapeutic and diagnostic capabilities when equipped with embedded sensors. However, wireless prostheses require through-the-body communication links with external readers, achieved through minimal structural alterations to preserve core functionalities and without batteries and complex electronics for biocompatibility and miniaturization. Such challenges can be addressed through two approaches: utilizing the prosthesis structure as a radiating element according to the paradigm of structural antennas and employing passive battery-less communication platforms operating in backscattering. The feasibility of these approaches, focusing on the ultrahigh-frequency (UHF) band (860–960 MHz), is demonstrated in this article through theoretical formalization, case studies, and in vitro measurements, with insights into materials and manufacturing processes provided.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 67 (4) , 55-66
Cyberprostheses: How to turn medical implants into wireless data generators for Health Care 4.0. [Bioelectromagnetics]
The evolution of prosthetics has been significantly shaped by advancements in biomedical engineering and state-of-the-art technologies. A notable breakthrough in this domain is the emergence of wireless implantable devices, representing a transformative shift in implant design and functionality. These prostheses aim to restore lost functionalities and seamlessly integrate with the human body, offering therapeutic and diagnostic capabilities when equipped with embedded sensors. However, wireless prostheses require through-the-body communication links with external readers, achieved through minimal structural alterations to preserve core functionalities and without batteries and complex electronics for biocompatibility and miniaturization. Such challenges can be addressed through two approaches: utilizing the prosthesis structure as a radiating element according to the paradigm of structural antennas and employing passive battery-less communication platforms operating in backscattering. The feasibility of these approaches, focusing on the ultrahigh-frequency (UHF) band (860–960 MHz), is demonstrated in this article through theoretical formalization, case studies, and in vitro measurements, with insights into materials and manufacturing processes provided.
- Open Access
Improving Vulnerability Management for Security-by-Design of Medical Devices
The healthcare industry is witnessing a rapid rise in the adoption of wearable and implantable medical devices, including advanced electrochemical sensors and other smart diagnostic technologies. These devices are increasingly used to enable real-time monitoring of physiological parameters, allowing for faster diagnosis and more personalized care plans. Their growing presence reflects a broader shift toward smart connected healthcare systems aimed at delivering immediate and actionable insights to both patients and medical professionals. At the same time, the healthcare industry is increasingly targeted by cyberattacks, primarily due to the high value of medical information; in addition, the growing integration of ICT technologies into medical devices has introduced new vulnerabilities that were previously absent in this sector. To mitigate these risks, new international guidelines advocate the adoption of best practices for secure software development, emphasizing a security-by-design approach in the design and implementation of such devices. However, the vast and fragmented nature of the information required to effectively support these development processes poses a challenge for the numerous stakeholders involved. In this paper, we demonstrate how key features of the Malware Information Sharing Platform (MISP) can be leveraged to systematically collect and structure vulnerability-related information for medical devices. We propose tailored structures, objects, and taxonomies specific to medical devices, facilitating a standardized data representation that enhances the security-by-design development of these devices.
Open AccessImproving Vulnerability Management for Security-by-Design of Medical Devices
The healthcare industry is witnessing a rapid rise in the adoption of wearable and implantable medical devices, including advanced electrochemical sensors and other smart diagnostic technologies. These devices are increasingly used to enable real-time monitoring of physiological parameters, allowing for faster diagnosis and more personalized care plans. Their growing presence reflects a broader shift toward smart connected healthcare systems aimed at delivering immediate and actionable insights to both patients and medical professionals. At the same time, the healthcare industry is increasingly targeted by cyberattacks, primarily due to the high value of medical information; in addition, the growing integration of ICT technologies into medical devices has introduced new vulnerabilities that were previously absent in this sector. To mitigate these risks, new international guidelines advocate the adoption of best practices for secure software development, emphasizing a security-by-design approach in the design and implementation of such devices. However, the vast and fragmented nature of the information required to effectively support these development processes poses a challenge for the numerous stakeholders involved. In this paper, we demonstrate how key features of the Malware Information Sharing Platform (MISP) can be leveraged to systematically collect and structure vulnerability-related information for medical devices. We propose tailored structures, objects, and taxonomies specific to medical devices, facilitating a standardized data representation that enhances the security-by-design development of these devices.
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 9 (3) , 326-334
Experimental Assessment of a Smart Skin for Temperature Monitoring During Superficial Microwave Hyperthermia
This paper presents the thermal validation of a Radio-Thermal Monitoring Sheet (R-TMS) designed for monitoring microwave hyperthermia treatments. The R-TMS consists of a grid of 77 passive Ultra High Frequency (UHF) Radio Frequency Identification (RFID) temperature sensors, which are wirelessly interrogated by an external reader integrated within the hyperthermia system, sharing the same antenna. The system was designed to ensure minimal interference with the therapeutic electromagnetic field while providing real-time feedback on skin temperature during the therapy. Laboratory assessments demonstrated the system's robustness against high-power electromagnetic fields, showing no significant self-heating or signal degradation. Pre-clinical tests confirmed that the R-TMS does not compromise treatment effectiveness or patient safety, with temperature monitoring results closely matching those obtained from conventional thermocouple-based methods. The proposed system offers a promising low-cost, wireless alternative for enhancing the safety and efficacy of superficial hyperthermia treatments.
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 9 (3) , 326-334
Experimental Assessment of a Smart Skin for Temperature Monitoring During Superficial Microwave Hyperthermia
This paper presents the thermal validation of a Radio-Thermal Monitoring Sheet (R-TMS) designed for monitoring microwave hyperthermia treatments. The R-TMS consists of a grid of 77 passive Ultra High Frequency (UHF) Radio Frequency Identification (RFID) temperature sensors, which are wirelessly interrogated by an external reader integrated within the hyperthermia system, sharing the same antenna. The system was designed to ensure minimal interference with the therapeutic electromagnetic field while providing real-time feedback on skin temperature during the therapy. Laboratory assessments demonstrated the system's robustness against high-power electromagnetic fields, showing no significant self-heating or signal degradation. Pre-clinical tests confirmed that the R-TMS does not compromise treatment effectiveness or patient safety, with temperature monitoring results closely matching those obtained from conventional thermocouple-based methods. The proposed system offers a promising low-cost, wireless alternative for enhancing the safety and efficacy of superficial hyperthermia treatments.
- 17 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 8, 226-234
RFID-Based Reconfigurable Electromagnetic Devices
Modern wireless communication systems are becoming increasingly necessary, emphasizing the need for electromagnetic devices that can flexibly operate under different conditions, e.g., under power constraints or in hostile environments where scattering objects randomly modify coverage areas and communication links. Due to their ability to dynamically change operating frequency, radiation pattern, bandwidth characteristics, and polarization, reconfigurable objects (especially antennas and backscattering surfaces) have received significant attention in this context. Electromagnetic features can be electronically selected by controlling the bias voltage of tunable elements adequately integrated into the layout. Usually, this is done by employing external programmable controllers that need power sources and wired connections, leading to unusable configurations for several scenarios. Thus, exploring alternative electronic tuning mechanisms becomes essential. This paper proposes RFID-Based Reconfigurable Electromagnetic Devices as a wireless, cost-effective, and low-power solution. The system’s operating principle, potential architectures, and applicability in practical scenarios are presented. Theoretical and experimental analysis validate the proposed architecture, whose capabilities are finally demonstrated by prototyping and testing two reconfigurable antenna arrays.
- 17 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 8, 226-234
RFID-Based Reconfigurable Electromagnetic Devices
Modern wireless communication systems are becoming increasingly necessary, emphasizing the need for electromagnetic devices that can flexibly operate under different conditions, e.g., under power constraints or in hostile environments where scattering objects randomly modify coverage areas and communication links. Due to their ability to dynamically change operating frequency, radiation pattern, bandwidth characteristics, and polarization, reconfigurable objects (especially antennas and backscattering surfaces) have received significant attention in this context. Electromagnetic features can be electronically selected by controlling the bias voltage of tunable elements adequately integrated into the layout. Usually, this is done by employing external programmable controllers that need power sources and wired connections, leading to unusable configurations for several scenarios. Thus, exploring alternative electronic tuning mechanisms becomes essential. This paper proposes RFID-Based Reconfigurable Electromagnetic Devices as a wireless, cost-effective, and low-power solution. The system’s operating principle, potential architectures, and applicability in practical scenarios are presented. Theoretical and experimental analysis validate the proposed architecture, whose capabilities are finally demonstrated by prototyping and testing two reconfigurable antenna arrays.
- Open Access
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4023-4035
Design of On-Body Epidermal Antenna on AMC Substrate for UHF RFID in Healthcare
This paper presents a compact AMC structure used as a shielding element for a generic wearable RFID tag at UHF frequencies for on-body applications, with an overall footprint limited to an area of only 0.03 λ 0 2 (41.4 mm × 82.8 mm). Thanks to the isolation provided by the AMC planar structure, the tag antenna gain and reading range are increased of about one order of magnitude in comparison with the case of a conventional tag attached to the human body. The designed antenna is platform tolerant, with a very good robustness and isolation with respect to the human body, exhibiting a high reliability. The AMC structure is implemented on a thin, flexible and biocompatible high permittivity silicon-doped dielectric substrate, with apertures both in the substrate and in the ground plane to allow skin transpiration. Therefore, the presented device can be effectively used also as an epidermal antenna, allowing the “on-skin” sampling of the most typical health parameters. The presented configuration has been designed using CST Studio Suite. A prototype has been fabricated and fully characterized, and measured results are in very good agreement with simulations.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4023-4035
Open AccessDesign of On-Body Epidermal Antenna on AMC Substrate for UHF RFID in Healthcare
This paper presents a compact AMC structure used as a shielding element for a generic wearable RFID tag at UHF frequencies for on-body applications, with an overall footprint limited to an area of only 0.03 λ 0 2 (41.4 mm × 82.8 mm). Thanks to the isolation provided by the AMC planar structure, the tag antenna gain and reading range are increased of about one order of magnitude in comparison with the case of a conventional tag attached to the human body. The designed antenna is platform tolerant, with a very good robustness and isolation with respect to the human body, exhibiting a high reliability. The AMC structure is implemented on a thin, flexible and biocompatible high permittivity silicon-doped dielectric substrate, with apertures both in the substrate and in the ground plane to allow skin transpiration. Therefore, the presented device can be effectively used also as an epidermal antenna, allowing the “on-skin” sampling of the most typical health parameters. The presented configuration has been designed using CST Studio Suite. A prototype has been fabricated and fully characterized, and measured results are in very good agreement with simulations.