Aleksandra I. Khirianova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksandra I. Khirianova has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Egor V. Parkevich
P. N. Lebedev Physical Institute of the Russian Academy of Sciences 1 , 53 Leninskiy Prospekt, Moscow 119991
10 shared publications - K. V. Shpakov
P. N. Lebedev Physical Institute of the Russian Academy of Sciences 1 , 53 Leninskiy Prospekt, Moscow 119991
7 shared publications - Timofey F. Khirianov
P. N. Lebedev Physical Institute of the Russian Academy of Sciences 1 , 53 Leninskiy Prospekt, Moscow 119991
6 shared publications - I. S. Baidin
P. N. Lebedev Physical Institute of the Russian Academy of Sciences 1 , 53 Leninskiy Prospekt, Moscow 119991
4 shared publications - D. V. Tolbukhin
P. N. Lebedev Physical Institute of the Russian Academy of Sciences
3 shared publications - Sergey Aleksandrovich Ambrozevich
Bauman Moscow State Technical University
3 shared publications
Latest Publications
- 1 August 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (8)
Transition from a cathode spot to a growing highly ionized filament in a spark discharge in atmospheric air
The transition from a cathode spot to a growing highly ionized filament in a pulsed nanosecond spark discharge in atmospheric air is investigated using multi-frame picosecond laser interferometry and shadow photography. The study integrates experimental observations with theoretical estimates into a unified physical picture linking explosive electron emission at the cathode, rapid polarization of the near-cathode plasma, ionization wave propagation, and plasma-chemical kinetics. The ionization wave velocity is determined as a fundamental characteristic of the filamentation process, independent of discharge type, electrode geometry, and initiation method, as confirmed by a comprehensive comparison with the literature. Statistical analysis of several hundred shots with Au, Cu, and Mo cathodes reveals that the generation of highly ionized cathode plasma is a universal phenomenon for different cathode materials and that the near-cathode plasma composition includes ionized metal vapor, while air ionization dominates in the bulk filament. A characteristic filamentation time governing the transition to the regime dominated by atomic nitrogen ions is estimated from the observed filament growth rate and agrees with plasma-kinetic modeling. These results provide a coherent physical picture of the transition from a cathode spot to a growing spark filament.
- 1 August 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (8)
Transition from a cathode spot to a growing highly ionized filament in a spark discharge in atmospheric air
The transition from a cathode spot to a growing highly ionized filament in a pulsed nanosecond spark discharge in atmospheric air is investigated using multi-frame picosecond laser interferometry and shadow photography. The study integrates experimental observations with theoretical estimates into a unified physical picture linking explosive electron emission at the cathode, rapid polarization of the near-cathode plasma, ionization wave propagation, and plasma-chemical kinetics. The ionization wave velocity is determined as a fundamental characteristic of the filamentation process, independent of discharge type, electrode geometry, and initiation method, as confirmed by a comprehensive comparison with the literature. Statistical analysis of several hundred shots with Au, Cu, and Mo cathodes reveals that the generation of highly ionized cathode plasma is a universal phenomenon for different cathode materials and that the near-cathode plasma composition includes ionized metal vapor, while air ionization dominates in the bulk filament. A characteristic filamentation time governing the transition to the regime dominated by atomic nitrogen ions is estimated from the observed filament growth rate and agrees with plasma-kinetic modeling. These results provide a coherent physical picture of the transition from a cathode spot to a growing spark filament.
- 22 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (20)
Pressure-threshold explosive cathode processes as the dominant source of a high-density plasma in nanosecond air discharges
We report a pressure-threshold phenomenon in nanosecond air discharges: explosive cathode processes become the dominant source of a dense highly ionized plasma at air pressures above ∼100 Torr. Picosecond laser imaging reveals that these explosive processes, while competing with air ionization, result in the ejection of cathode material over a time scale shorter than 1 ns to create a plasma with electron densities as high as ≈6 × 1019 cm−3, significantly exceeding values achievable through air ionization alone. The explosive processes exhibit a sharp onset, disappearing when the air pressure drops by as little as tens of Torr relative to 100 Torr. Our findings demonstrate that, at high air pressures, cathode vaporization—rather than gas ionization—initiates the generation of such a dense plasma and enables electric spark formation. At intermediate pressures, below ∼100 Torr, yet above vacuum conditions, this explosive mechanism is suppressed, and the discharge transitions to a regime governed by volumetric gas ionization. This behavior contrasts with vacuum discharges, where cathode material is the dominant plasma source. The revealed threshold mechanism is crucial for controlling plasma in applications ranging from nanoparticle synthesis to pulsed power systems.
- 22 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (20)
Pressure-threshold explosive cathode processes as the dominant source of a high-density plasma in nanosecond air discharges
We report a pressure-threshold phenomenon in nanosecond air discharges: explosive cathode processes become the dominant source of a dense highly ionized plasma at air pressures above ∼100 Torr. Picosecond laser imaging reveals that these explosive processes, while competing with air ionization, result in the ejection of cathode material over a time scale shorter than 1 ns to create a plasma with electron densities as high as ≈6 × 1019 cm−3, significantly exceeding values achievable through air ionization alone. The explosive processes exhibit a sharp onset, disappearing when the air pressure drops by as little as tens of Torr relative to 100 Torr. Our findings demonstrate that, at high air pressures, cathode vaporization—rather than gas ionization—initiates the generation of such a dense plasma and enables electric spark formation. At intermediate pressures, below ∼100 Torr, yet above vacuum conditions, this explosive mechanism is suppressed, and the discharge transitions to a regime governed by volumetric gas ionization. This behavior contrasts with vacuum discharges, where cathode material is the dominant plasma source. The revealed threshold mechanism is crucial for controlling plasma in applications ranging from nanoparticle synthesis to pulsed power systems.
- 6 March 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (3) , 035203
Phase transitions and plasma formation during the explosion of thin point cathodes in a high-current diode operating from vacuum to forevacuum
We investigate the processes of plasma formation and phase transitions occurring during the explosion of metal point emitters made from copper and tungsten wires approximately 1 mm in length and ∼10 µm in diameter. The experiments were performed under vacuum-to-forevacuum discharge conditions using nanosecond current pulses of up to ∼1 kA. It was found that an extended region of the copper emitter, with a length of ∼200-300 µm, remains intact for tens of nanoseconds and even after the discharge ends, while the emitter's base explodes completely, and its explosion products become stratified. A transition zone is observed between the base and end regions of the emitter, characterized by a smooth or sharp expansion of the degraded metal without stratification in the explosion products. During the copper emitter explosion, ejections of dense plasma with an electron concentration of at least 10^{20}cm^{-3} can occur. The expansion velocity of the exploded copper emitter material can reach (1-3)×10^{5} cm/s at residual air pressures of 10^{-4} to 10^{-1} Torr. An increase in air pressure to ∼1 Torr leads to a decrease in both the specific energy input and the expansion velocity of the explosion products. The explosion dynamics of copper and tungsten point emitters differ. In the structure of the tungsten emitter's explosion products, no striations are observed, and the length of the exploded region almost entirely coincides with the emitter's total length. Analysis of the point emitters' explosion dynamics and the discharge's electrophysical parameters indicates that the transition of the emitter to the explosion regime is based on two key stages: first, the achievement of the explosive electron emission mode over an extended part of the emitter's end region, followed by the development of a shunting breakdown through the expanding explosion products along the emitter surface.
- 6 March 2026
- Published by American Physical Society (APS) in Physical Review E
- Vol. 113 (3) , 035203
Phase transitions and plasma formation during the explosion of thin point cathodes in a high-current diode operating from vacuum to forevacuum
We investigate the processes of plasma formation and phase transitions occurring during the explosion of metal point emitters made from copper and tungsten wires approximately 1 mm in length and ∼10 µm in diameter. The experiments were performed under vacuum-to-forevacuum discharge conditions using nanosecond current pulses of up to ∼1 kA. It was found that an extended region of the copper emitter, with a length of ∼200-300 µm, remains intact for tens of nanoseconds and even after the discharge ends, while the emitter's base explodes completely, and its explosion products become stratified. A transition zone is observed between the base and end regions of the emitter, characterized by a smooth or sharp expansion of the degraded metal without stratification in the explosion products. During the copper emitter explosion, ejections of dense plasma with an electron concentration of at least 10^{20}cm^{-3} can occur. The expansion velocity of the exploded copper emitter material can reach (1-3)×10^{5} cm/s at residual air pressures of 10^{-4} to 10^{-1} Torr. An increase in air pressure to ∼1 Torr leads to a decrease in both the specific energy input and the expansion velocity of the explosion products. The explosion dynamics of copper and tungsten point emitters differ. In the structure of the tungsten emitter's explosion products, no striations are observed, and the length of the exploded region almost entirely coincides with the emitter's total length. Analysis of the point emitters' explosion dynamics and the discharge's electrophysical parameters indicates that the transition of the emitter to the explosion regime is based on two key stages: first, the achievement of the explosive electron emission mode over an extended part of the emitter's end region, followed by the development of a shunting breakdown through the expanding explosion products along the emitter surface.
- 25 February 2026
- Published by Elsevier in Communications in Nonlinear Science and Numerical Simulation
- Vol. 159
ORION: Optical reconstructor for interferometric object numerical analysis
- 25 February 2026
- Published by Elsevier in Communications in Nonlinear Science and Numerical Simulation
- Vol. 159
ORION: Optical reconstructor for interferometric object numerical analysis
- Open Access
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 131757-131771
WISP: Workframe for Interferogram Signal Phase-Unwrapping
This paper proposes an iterative framework WISP (Workframe for Interferogram Signal Phase-unwrapping for phase reconstruction from interferograms of complex phase objects. The framework processes each interferogram through the sequential stages: dark fringe tracing, isophase distribution, local gradient direction estimation, anisotropic (local direction dependent) diffusion smoothing, phase unwrapping, and convergence testing. Iterations continue until the difference between the reconstructed and experimental phase distributions reaches an asymptotic minimum. A key contribution is the proposed loss function for isophase fitting, which directly optimizes curve quality and enhances reconstruction accuracy. Experimental results confirm the algorithm’s highest precision. A study of the framework’s resistance to noise was conducted, showing high stability even in the case of noise with an amplitude half the amplitude of the image brightness. Comparative analysis against established baselines reveals that the WISP consistently outperforms alternative approaches in accurately unwrapping the phase, particularly under high noise conditions. Evaluated using RMSD metrics, WISP achieves the lowest reconstruction errors, reducing them by 39.7% compared to the next best method (Deep Convolutional Neural Network), highlighting its superior robustness and accuracy.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 131757-131771
Open AccessWISP: Workframe for Interferogram Signal Phase-Unwrapping
This paper proposes an iterative framework WISP (Workframe for Interferogram Signal Phase-unwrapping for phase reconstruction from interferograms of complex phase objects. The framework processes each interferogram through the sequential stages: dark fringe tracing, isophase distribution, local gradient direction estimation, anisotropic (local direction dependent) diffusion smoothing, phase unwrapping, and convergence testing. Iterations continue until the difference between the reconstructed and experimental phase distributions reaches an asymptotic minimum. A key contribution is the proposed loss function for isophase fitting, which directly optimizes curve quality and enhances reconstruction accuracy. Experimental results confirm the algorithm’s highest precision. A study of the framework’s resistance to noise was conducted, showing high stability even in the case of noise with an amplitude half the amplitude of the image brightness. Comparative analysis against established baselines reveals that the WISP consistently outperforms alternative approaches in accurately unwrapping the phase, particularly under high noise conditions. Evaluated using RMSD metrics, WISP achieves the lowest reconstruction errors, reducing them by 39.7% compared to the next best method (Deep Convolutional Neural Network), highlighting its superior robustness and accuracy.
- Open Access
- 22 April 2025
- Published by Association for Computing Machinery (ACM)
- p. 2657-2667
BAT: Benchmark for Auto-bidding Task
- 22 April 2025
- Published by Association for Computing Machinery (ACM)
- p. 2657-2667
Open AccessBAT: Benchmark for Auto-bidding Task
- 9 December 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 110 (6) , 065204
Spatial, temporal, and spectral characteristics of the x-ray emissions in the peripheral direction of a laboratory atmospheric discharge
Comprehensive measurements of the x-ray emissions in the peripheral direction of extended high-voltage discharges in 55-cm open air gaps are performed at voltages up to 1 MV. The data on the spatial, temporal, and spectral characteristics of x rays are obtained. We demonstrate that the emission of photons with energies within 5-17 keV predominates throughout the entire discharge gap. The generation of photons with energies of hundreds of keV (but not higher than 300 keV) is found to be characteristic of the cathode, near-cathode, anode, and near-anode regions of the discharge, whereas approximately in the midgap low-energy photons are primarily observed. By using nanosecond imaging, it is discovered that the x-ray generation can start almost synchronously throughout the entire discharge gap, tens of nanoseconds after the first interactions of the counterstreamers with the cathode. The very first x rays are detected during the discharge development stage, when a complex net of numerous plasma structures already formed in the gap, and the discharge prebreakdown current and voltage are of 500 A and 1 MV. In a single x-ray flash, high-energy photons are found to emerge with a 20-60 ns delay relative to the onset of the low-energy photon emission. The observed phenomena and possible x-ray generation mechanisms are analyzed.
- 9 December 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 110 (6) , 065204
Spatial, temporal, and spectral characteristics of the x-ray emissions in the peripheral direction of a laboratory atmospheric discharge
Comprehensive measurements of the x-ray emissions in the peripheral direction of extended high-voltage discharges in 55-cm open air gaps are performed at voltages up to 1 MV. The data on the spatial, temporal, and spectral characteristics of x rays are obtained. We demonstrate that the emission of photons with energies within 5-17 keV predominates throughout the entire discharge gap. The generation of photons with energies of hundreds of keV (but not higher than 300 keV) is found to be characteristic of the cathode, near-cathode, anode, and near-anode regions of the discharge, whereas approximately in the midgap low-energy photons are primarily observed. By using nanosecond imaging, it is discovered that the x-ray generation can start almost synchronously throughout the entire discharge gap, tens of nanoseconds after the first interactions of the counterstreamers with the cathode. The very first x rays are detected during the discharge development stage, when a complex net of numerous plasma structures already formed in the gap, and the discharge prebreakdown current and voltage are of 500 A and 1 MV. In a single x-ray flash, high-energy photons are found to emerge with a 20-60 ns delay relative to the onset of the low-energy photon emission. The observed phenomena and possible x-ray generation mechanisms are analyzed.
- Open Access
- 28 October 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (16)
Angular anisotropy of hard x rays produced by laboratory atmospheric discharges
The temporal, spectral, and angular characteristics of the x-ray emissions (photons with energies within 5–1000 keV) are exhaustively investigated during the discharge formation at voltages up to 1 MV in approximately 55 cm air gaps. The temporal correlations between the x-ray emissions and discharge voltage and current waveforms are established. The evolution of the discharge plasma structures developing in the time periods of the x-ray generation is traced with a nanosecond resolution. Based on statistical data, theoretical analysis, and estimates the regularities in the x-ray emission characteristics are revealed together with their relationship with the ionization processes occurring in the gas-discharge medium. On the basis of the obtained experimental data, the probable x-ray generation mechanisms are discussed. The findings can provide a deeper understanding of the physics behind the sources of hard x rays arising during the development of laboratory and atmospheric discharges.
- 28 October 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (16)
Open AccessAngular anisotropy of hard x rays produced by laboratory atmospheric discharges
The temporal, spectral, and angular characteristics of the x-ray emissions (photons with energies within 5–1000 keV) are exhaustively investigated during the discharge formation at voltages up to 1 MV in approximately 55 cm air gaps. The temporal correlations between the x-ray emissions and discharge voltage and current waveforms are established. The evolution of the discharge plasma structures developing in the time periods of the x-ray generation is traced with a nanosecond resolution. Based on statistical data, theoretical analysis, and estimates the regularities in the x-ray emission characteristics are revealed together with their relationship with the ionization processes occurring in the gas-discharge medium. On the basis of the obtained experimental data, the probable x-ray generation mechanisms are discussed. The findings can provide a deeper understanding of the physics behind the sources of hard x rays arising during the development of laboratory and atmospheric discharges.
- 14 May 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 109 (5) , 055204
Strong diffraction effects accompany the transmission of a laser beam through inhomogeneous plasma microstructures
In the study we thoroughly analyze diffraction effects accompanying the laser beam transmission through inhomogeneous plasma microstructures and simulate their diffraction patterns at the object output and in the near field. For this we solve the scalar Helmholtz wave equation in the first Rytov approximation and compute the diffraction spreading of the transmitted beam in free space. Diffraction effects are found to arise within the beam passage through inhomogeneous plasma microstructures even in the simplest approximations of the laser beam interaction with plasma. These effects become strong in the near-field region and significantly distort the patterns of plasma formations, as well as facilitate the appearance of various optical artifacts in the plasma images. By performing numerical simulations, we characterize in detail the features of the visualization of plasma formations in the field of a coherent laser beam registered by a lens system. The calculations are in good agreement with the experimental data. The study can find broad applications in the processing of the laser images of plasma microstructures registered by lens systems in the presence of strong diffraction effects.
- 14 May 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 109 (5) , 055204
Strong diffraction effects accompany the transmission of a laser beam through inhomogeneous plasma microstructures
In the study we thoroughly analyze diffraction effects accompanying the laser beam transmission through inhomogeneous plasma microstructures and simulate their diffraction patterns at the object output and in the near field. For this we solve the scalar Helmholtz wave equation in the first Rytov approximation and compute the diffraction spreading of the transmitted beam in free space. Diffraction effects are found to arise within the beam passage through inhomogeneous plasma microstructures even in the simplest approximations of the laser beam interaction with plasma. These effects become strong in the near-field region and significantly distort the patterns of plasma formations, as well as facilitate the appearance of various optical artifacts in the plasma images. By performing numerical simulations, we characterize in detail the features of the visualization of plasma formations in the field of a coherent laser beam registered by a lens system. The calculations are in good agreement with the experimental data. The study can find broad applications in the processing of the laser images of plasma microstructures registered by lens systems in the presence of strong diffraction effects.
- Open Access
- 18 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (15)
Temporal correlation between hard x rays and radio emissions in the MHz and GHz frequency ranges generated by a laboratory high-voltage discharge
We investigate the temporal correlation between very-high-frequency (VHF, at frequencies of the order of 10–100 MHz), ultrahigh-frequency (UHF, at frequencies within 1–6 GHz), and x-ray (with photon energies more than 10 keV) emissions, which accompany the development of a high-voltage discharge initiated in a long gap at voltages up to 1 MV. The x-ray and UHF emissions are found to emerge starting approximately from the prepulse current onset observed before the discharge gap breakdown and both gradually decay coming to this instant. The UHF emission spectrum is represented with frequencies up to 6 GHz, with the highest spectral power being achieved within 1–2 GHz. The radio emission power drops sharply at frequencies below 1 GHz and increases closer to 150 MHz with the highest spectral power of VHF radiation being reached within 60–90 MHz. The VHF emission can appear before the discharge current and UHF emission onsets in the form of 100-ns-long prepulses, and its intensity significantly increases as the UHF emission starts. The analysis of the temporal correlation between x rays, VHF, and UHF radiations, discharge current, and voltage waveforms indicates that the generation mechanisms of the discharge electromagnetic radiations are difficult to be interpreted in terms of the developing or colliding streamer concepts.
- 18 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (15)
Open AccessTemporal correlation between hard x rays and radio emissions in the MHz and GHz frequency ranges generated by a laboratory high-voltage discharge
We investigate the temporal correlation between very-high-frequency (VHF, at frequencies of the order of 10–100 MHz), ultrahigh-frequency (UHF, at frequencies within 1–6 GHz), and x-ray (with photon energies more than 10 keV) emissions, which accompany the development of a high-voltage discharge initiated in a long gap at voltages up to 1 MV. The x-ray and UHF emissions are found to emerge starting approximately from the prepulse current onset observed before the discharge gap breakdown and both gradually decay coming to this instant. The UHF emission spectrum is represented with frequencies up to 6 GHz, with the highest spectral power being achieved within 1–2 GHz. The radio emission power drops sharply at frequencies below 1 GHz and increases closer to 150 MHz with the highest spectral power of VHF radiation being reached within 60–90 MHz. The VHF emission can appear before the discharge current and UHF emission onsets in the form of 100-ns-long prepulses, and its intensity significantly increases as the UHF emission starts. The analysis of the temporal correlation between x rays, VHF, and UHF radiations, discharge current, and voltage waveforms indicates that the generation mechanisms of the discharge electromagnetic radiations are difficult to be interpreted in terms of the developing or colliding streamer concepts.