DSDaniel Sahm

Daniel Sahm

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniel Sahm has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Robustness of CNN models for EMI‐based bolt preload prediction

    by Daniel Sahm, Daniel Pak

    In a previous study, the combination of electromechanical impedance (EMI) and convolutional neural networks (CNN) was shown to enable accurate prediction of bolt preload. The models were trained in a position‐specific manner and applied to the trained bolt under controlled laboratory conditions, resulting in robust prediction performance. The high level of accuracy obtained in that study provides the basis for further development of the approach with regard to generalisability and robustness for practical application. Key questions concern the transferability of a reference model to different bolt positions and the reduction of training effort through modelling at the bolt‐type level. This study therefore systematically investigates position and bolt transferability, as well as the prediction of temperature information from EMI spectra. A compact CNN was trained on data from a single bolt and validated using measurements from different positions and bolt specimens. The results demonstrate high prediction accuracy ( R 2 = 0.95, MAE = 5.8 % F p,C ) across different positions. In addition, temperature values could be reconstructed precisely from the EMI spectra (MAE = 0.09 °C), providing a basis for future temperature compensation strategies. The findings highlight the potential of the EMI‐based CNN approach to evolve from a laboratory application towards a robust, transferable, and scalable solution for practical structural health monitoring (SHM).


  • CNN‐Based Determination of Bolt Preload in High‐Strength Bolted Connections

    by Daniel Sahm, Daniel Pak

    This publication presents the first part of a comprehensive study on a novel methodology for real‐time monitoring of preload in high‐strength bolted connections, applied to a standardised beam‐to‐column frame corner. The approach combines electromechanical impedance (EMI) measurements with convolutional neural networks (CNNs) to enable a scalable, robust, and industrially applicable solution for structural health monitoring (SHM). This first part focuses on demonstrating the applicability of the EMI‐CNN concept, explaining the underlying physical principles, and developing an automated evaluation environment. Two experimental series were conducted on a standardised frame corner specimen with M16 HV bolts. EMI spectra were acquired using surface‐mounted piezoelectric transducers and processed with trained CNN models to quantify the preload. In the conducted experiments, the model achieved a mean absolute error (MAE) of 1.07 % with respect to the applied preload. An interactive software tool was developed to support practical application, including visualisation of the bolted connection, model import, and automated real‐time evaluation of new EMI measurements. The preload level is displayed as a percentage, while an integrated traffic light system enables intuitive real‐time condition assessment. The results confirm the feasibility and reliability of the EMI‐CNN framework for preload determination and provide a solid basis for scalable industrial implementation using pre‐calibrated, sensor‐integrated bolts.


  • Anwendung von piezoelektrischer Sensorik zur Überwachung von Schraubenverbindungen

    by Christoph del Castillo Albildo, Daniel Pak, Daniel Sahm

    Abstrakt: Die Zustandsüberwachung von Schraubenverbindungen, die durch zyklische Lasten und Umwelteinflüsse beansprucht werden, reicht von händischen Kontrollen in definierten Intervallen bis hin zur kontinuierlichen Messung mit Sensoren im Rahmen des Structural Health Monitorings. Piezoelektrische Sensorik, die auf der Fähigkeit bestimmter Kristallmaterialien beruht, mechanische Deformation in elektrische Signale und umgekehrt elektrische Felder in mechanische Bewegung umzuwandeln (Doppelfunktion: Aktor und Sensor in einem Element), eignet sich zur Detektion verschiedener Schadenstypen wie Vorspannkraftverlust, Rissbildung und Korrosion. Dabei werden schadenssensitive Merkmale für jeden Schadenstyp ermittelt, um die Schadenstypen voneinander abzugrenzen.Im Rahmen anwendungsnaher Forschungsprojekte wurden sowohl numerische Simulationen als auch experimentelle Untersuchungen zur Detektion dieser typischen Schädigungsmechanismen an Schraubenverbindungen durchgeführt. Die eingesetzten Methoden basieren auf der elektromechanischen Impedanzmessung sowie auf Ultraschallverfahren. Die Untersuchungen zielten auf die Identifikation und Quantifizierung von Vorspannkraftverlusten, Rissbildung sowie korrosiven Schädigungen ab. Die Ergebnisse belegen eine hohe Sensitivität der piezoelektrischen Sensorik gegenüber den betrachteten Schadensszenarien und eröffnen neue Perspektiven für ein zuverlässiges, echtzeitfähiges Monitoring von Schraubenverbindungen, das verschiedene Schadensmechanismen simultan erfasst und bewertet.


  • Untersuchung zur Detektion von Oberflächenkorrosion an Schrauben mithilfe von piezoelektrischen Wandlern

    by Daniel Sahm, Daniel Pak

    Die Studie untersucht die Anwendbarkeit von piezoelektrischen Wandlern zur zerstörungsfreien Detektion von Oberflächenkorrosion an Schrauben. Grundlage dieser Methode ist die Messung elektromechanischer Impedanzspektren, die sich infolge variierender Strukturzustände verändern und grundsätzlich eine Bewertung des Strukturzustands ermöglichen. Im Rahmen der Studie wurden zur Eignungsprüfung experimentelle und numerische Untersuchungen an vier HV‐Schraubengrößen nach DIN EN 14399‐4 durchgeführt. Es konnte ein Zusammenhang zwischen der Verschiebung der Resonanzamplitude der Schrauben und dem Korrosionsgrad hergestellt werden. Weiterhin wurde ein annähernd linearer Trend zwischen der Änderung des Schaftquerschnitts und der Verschiebung der Resonanzamplitude beobachtet. Darüber hinaus konnte die Entwicklung der Impedanzspektren erfolgreich durch eine numerische Simulation reproduziert werden. Die Ergebnisse der Studie zeigen einen vielversprechenden Ansatz für eine automatisierte und kosteneffiziente Überwachung der Oberflächenkorrosion von Schrauben. Die Integration dieser Technologie könnte in verschiedenen Anwendungsbereichen zu erheblichen Kosteneinsparungen und erhöhter Sicherheit führen, insbesondere bei der Überwachung schwer zugänglicher, korrosionsgefährdeter Bereiche.


  • Open Access

    Influence of temperature and preload force on capacitance and electromechanical impedance of lead zirconate titanate piezoelectric wafer active sensors for structural health monitoring of bolts

    by Daniel Sahm, Daniel Pak

    This study focuses on the effect of temperature and preload force on capacitance and electromechanical impedance of lead zirconate titanate piezoelectric wafer active sensors for structural health monitoring of bolts. We explain the influence of temperature on the basis of the phenomenological thermodynamic theory of ferroelectricity by Landau, Ginsburg and Devonshire. The article illustrates the effect of damping the radial deformation of piezoelectric sensors on the capacitance and electromechanical impedance spectra in structural health monitoring of bolts. We also explains the similarities between the effects of temperature and preload force on the electromechanical impedance spectra. We establish a clear correlation between the mechanical strain in the region of the sensor (here due to a preload force), the capacitance and the electromechanical impedance spectra and thus show that piezoelectric sensors made of lead–zirconate–titanate can be used excellently in areas of variable mechanical strain. The article enhances the understanding of the measurement method and facilitates the transfer of the measurement method to other problems in structural health monitoring. Furthermore, the acquired knowledge serves as a solid basis for verifying the plausibility of data sets containing electromechanical impedance spectra.


  • Open Access

    Non‐destructive damage detection on welded threaded bolts based on electromechanical impedance spectra

    by Daniel Sahm, Daniel Pak, Claus‐Peter Fritzen, Anna‐Lena Dreisbach, Gerhard Dietrich, Volkan Yokaribas

    Within a research project carried out at the Department of Civil Engineering and the Department of Mechanical Engineering of the University of Siegen, a new monitoring method for non‐destructive damage detection on bolts was developed and tested according to its applicability on real life structures. The so‐called EMI‐method is based on the measurement of electromechanical impedance spectra, which change with varying structural states and thus allow for a condition assessment.Structures vibrate in a combination of their natural modes, which can provide information about their structural condition. Their modal characteristics are system‐inherent quantities and are governed by geometry, system stiffnesses and mass allocation. If a system parameter changes, e.g. the bending stiffness of a bridge, this is reflected in the vibration analysis and the modal characteristics. To identify the modal characteristics of civil engineering structures, these are excited and the system response is measured. This principle is also used for damage detection by means of electro‐mechanical impedance spectra (EMI). The observed system‐inherent quantity is the frequency‐dependent mechanical impedance Zs(ω) of the structure. The method is based on the idea that the mechanical impedance of a structure or component to be measured changes as a result of damage (or loss of prestress in the case of bolts) and thus these changes can be detected.In the project, investigations were carried out on steel plates with orthogonally welded threaded bolts, which are used, for example, as fasteners for rail supporting points on bridges. Research objectives were on one hand the detection of the prestress stage and on the other hand the detection of fatigue damage in the weld seam. Within the scope of the project, it has been investigated to what extent a change of the prestressing load can be reliably detected by means of the EMI method. Furthermore, the influence of damage to the bolt on the impedance spectra was investigated.