IGInmaculada Gimenez-Garcia

Inmaculada Gimenez-Garcia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Inmaculada Gimenez-Garcia has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • (Keynote) Towards Deterministic Electrode Design for Redox Flow Batteries: Progress and Challenges

    by Antoni Forner-Cuenca, Rémy Richard Jacquemond, Maxime van der Heijden, Mojtaba Barzegari, Inmaculada Gimenez-Garcia, Baichen Liu, Emre Burak Boz

    Porous electrodes are foundational components in electrochemical energy conversion and storage systems. In redox flow batteries (RFBs), electrode materials govern reaction kinetics and mass transport, ultimately defining system performance, durability, and cost. While conventional RFBs typically employ commercially available materials such as carbon felts and papers, emerging research has demonstrated that novel electrode architectures can outperform these fibrous structures. This progress underscores the importance of understanding how microstructure and surface composition influence electrochemical behavior. In this lecture, I will first review the fundamental roles of electrodes in RFBs and outline performance requirements across various flow battery chemistries, supported by illustrative examples from recent literature. I will then highlight three recent developments from our research group: (1) computational design of porous electrodes using high-performance topology optimization frameworks and genetic algorithms 1,2 , (2) scalable manufacturing of tailored electrode architectures 3–5 , and (3) surface and electrolyte engineering strategies to modulate reaction selectivity in hybrid flow battery systems 6,7 . Finally, I will present key electrode performance metrics, discuss characterization techniques to assess them, and conclude with practical guidelines for rational electrode design. References (1) Barzegari, M.; Forner-Cuenca, Chemical Engineering Journal 2025 , 512 , 161815. (2) Van Der Heijden, M.; Szendrei, G.; De Haas, V.; Forner-Cuenca, A., Digital Discovery 2024 , 3 (7), 1292–1307. (3) Integrating Flow Field Geometries within Porous Electrode Architectures for Enhanced Flow Battery, ChemRxiv . https://chemrxiv.org/engage/chemrxiv/article-details/67e7c119fa469535b9e81bbd. (4) Jacquemond, R. R.; Wan, C. T.-C.; Chiang, Y.-M.; Borneman, Z.; Brushett, F. R.; Nijmeijer, K.; Forner-Cuenca, A, Cell Reports Physical Science 2022 , 3 (7), 100943. (5) Wan, C. T.-C.; Jacquemond, R. R.; Chiang, Y.-M.; Nijmeijer, K.; Brushett, F. R.; Forner-Cuenca, Advanced Materials 2021 , 33 (16), 2006716 (6) Boz, E. B.; Bondre, A.; Bruijne, R. de; Forner-Cuenca, Advanced Materials 2025 , 2414596. (7) Gimenez-Garcia, I.; Forner-Cuenca, Electrochimica Acta 2024 , 498 , 144509.

  • Open Access

    Exploring iron-containing electrodes for all-iron redox flow batteries

    by Inmaculada Gimenez-Garcia, Antoni Forner-Cuenca

    This work investigates the use of iron- and steel-based electrodes as alternatives to prevalent carbon fiber-based electrodes in the negative half-cell of all-iron redox flow batteries. Through electrochemical and structural characterization of planar electrodes, we demonstrate that stainless steel, particularly the 316-type, enables improved iron plating kinetics and comparable or superior performance in flow cell configurations. Three-dimensional porous architectures were evaluated, revealing that mesh structures offer high permeability and stable cycling, while non-woven mats provide higher gravimetric capacity but are susceptible to pore clogging and mass transport limitations. Full-cell tests confirm enhanced voltage efficiency and capacity retention for steel-based electrodes over state-of-the-art carbon materials, as they limit oxide precipitation and electrode clogging. The results highlight the critical role of electrode microstructure and surface chemistry in phase-evolving systems and highlight the potential of steel electrodes as scalable, cost-effective alternatives for next-generation hybrid flow battery applications.

  • (Invited) Neutron Radiography for Visualizing Reactive Mass Transport in Redox Flow Cells

    by Antoni Forner-Cuenca, Inmaculada Gimenez-Garcia, Maxime van der Heijden, Marina Tabuyo-Martinez, Adrian A Mularczyk, Emre Burak Boz, Pierre Boillat, Rémy Richard Jacquemond

    The ability to visualize internal processes within electrochemical reactors in real-time, using advanced imaging techniques such as X-ray radiography/tomography, neutron radiography, and infrared thermography, has been pivotal in advancing technologies like lithium-ion batteries and polymer electrolyte fuel cells. While conventional diagnostics (e.g., current-voltage curves, electrochemical impedance spectroscopy) offer valuable system-level insights, they inherently provide averaged data, making it challenging to understand the impact of localized variations in properties such as concentration, temperature, and current density on overall reactor performance. In this lecture, I will explore the unique capabilities of neutron imaging in unveiling the spatial distribution of phases (liquid and gas) and concentrations (e.g., supporting ions and redox-active species) within electrochemical flow cells, with redox flow batteries serving as a relevant example. First, I will discuss the use of conventional (i.e. white beam) neutron radiography to visualize electrolyte infiltration into porous electrodes.1 By coupling electrochemical measurements and neutron radiography, we correlate the degree of electrolyte infiltration and the electrochemically accessible surface area of the electrode. Second, I will explore how both white beam and energy-selective neutron imaging are utilized to quantify concentration distributions in a non-aqueous redox flow battery. Capitalizing on the high neutron sensitivity of hydrogen-rich redox-active molecules and boron-containing supporting electrolytes, we achieve operando mapping of concentration gradients and distributions during operation.2 Third and finally, I will introduce the use of polarized neutron imaging to study iron plating and stripping processes in all-iron redox flow batteries. This technique leverages the magnetic properties of alpha-iron to visualize and track the dynamics of the plating front under varying operating conditions, electrolyte compositions, and reactor designs. Together, these results demonstrate the versatility and power of neutron imaging as a tool to unravel complex reactive mass transport phenomena, providing insights for the design and optimization of next-generation electrochemical systems. References (1) Boz, E. B.; Van Der Heijden, M.; Jacquemond, R. R.; Boillat, P.; Hjelm, J.; Forner-Cuenca, A. Correlating Electrolyte Infiltration with Accessible Surface Area in Macroporous Electrodes Using Neutron Radiography. J. Electrochem. Soc. 2024, 171 (5), 053509. https://doi.org/10.1149/1945-7111/ad4ac7. (2) Jacquemond, R. R.; Van Der Heijden, M.; Boz, E. B.; Carreón Ruiz, E. R.; Greco, K. V.; Kowalski, J. A.; Muñoz Perales, V.; Brushett, F. R.; Nijmeijer, K.; Boillat, P.; Forner-Cuenca, A. Quantifying Concentration Distributions in Redox Flow Batteries with Neutron Radiography. Nat. Commun. 2024, 15 (1), 7434. https://doi.org/10.1038/s41467-024-50120-7.

  • Open Access

    Polarization contrast neutron imaging enables operando visualization of iron plating in redox flow batteries

    by Inmaculada Gimenez-Garcia, Marina Tabuyo-Martinez, Pierre Boillat, Rémy R. Jacquemond, Adrian Mularczyk, Antoni Forner-Cuenca

    Visualizing multiphase (solid–liquid–gas) electrochemical transformations during operation is essential to advancing sustainable energy storage technologies. All-iron redox flow batteries represent a promising candidate due to their low-cost, earth-abundant materials; however, they suffer from uneven plating rates, cycling instability, and parasitic hydrogen evolution. Here, we introduce an operando neutron imaging methodology – combining polarized and transmission modes – to simultaneously track iron plating/stripping and hydrogen evolution. We uncover preferential iron deposition near the membrane indicating a non-uniform current density distribution. We find that pH plays a major role in reaction selectivity and cycling performance, where less acidic pH results in inaccessible iron deposits. Our experiments with different flow field geometries show that both reaction selectivity and spatial distribution are strongly influenced by electrolyte flow patterns. This multimodal imaging approach provides critical insights into reactive transport and multiphase behavior in flow batteries.


  • Neutron Depolarization Under Electrochemical Polarization: Investigating Phase Change Reactions in All-Iron Redox Flow Batteries

    by Inmaculada Gimenez-Garcia, Marina Tabuyo-Martinez, Rémy Jacquemond, Adrian A Mularczyk, Pierre Boillat, Antoni Forner-Cuenca

    Large-scale and low-cost energy storage systems are necessary to integrate renewable energy technologies into the electrical grid. Among the options, all-iron redox flow batteries (AIRFBs) are a promising candidate as they can strike a good balance between flexibility and modularity [1]. Additionally, they employ sustainable and abundant raw materials in both half cells, thus decreasing their capital costs and their need for maintenance, which contribute to lower levelized cost of storage [2]. However, AIRFBs still suffer from certain operational challenges, such as the unoptimized and segregated electrodeposition of the active species and the competitive hydrogen evolution reaction [3]. Conventional characterization techniques cannot accurately determine the spatial distribution of both reactions within the electrochemical cell, and thus the operational losses they generate still remain unclear. In recent years, several groups have explored non-invasive operando characterization of RFBs by use of nuclear magnetic resonance[4] or fluorescence microscopy[5], among others. Recently, our group developed a neutron radiography-based method to visualize concentrations in solution of redox or charge carrier species, enabling visualization of local concentration effects [6]. Nevertheless, this approach relies solely on species in solution providing high attenuation, such as H-, B-, or Li- containing electrolytes. Therefore, this attenuation mechanism severely restricts the types of species or phases that can be probed, and the regions of interest where the metal electroplating occurs would remain difficult to quantify with conventional neutron imaging [7]. In this work, we expand the workspace of neutron radiography in electrochemical cells to systems employing substances of lower neutron cross section by combining the use of in-plane transmission and polarized neutron imaging. With this dual characterization approach, we are able to visualize for the first time the distribution of iron plated species and hydrogen evolution during electrochemical operation in an all-iron redox flow battery. First, we validate the proposed methodology by performing ex-situ measurements of the depolarization response caused by the magnetic momentum of the various iron-containing species that could form during the charging process of the AIRFB system. We find that only purely ferromagnetic substances (e.g. microscale alpha-iron particles) produce a strong and depolarizing response, with a linear dependence between the depolarization coefficient and the weight fraction of the magnetic phase, thus enabling the detection of subtle changes in plated iron content. On the contrary, weak ferri- or paramagnetic compounds, such as Fe2O3, Fe3O4 or FeOOH, do not cause interference in the measured signal. Subsequently, we run an all-iron redox flow battery at the BOA neutron beamline and performed simultaneous neutron imaging under two modes. By means of the polarization contrast neutron imaging, we tracked the electrodeposition of iron during charge and its removal during discharge within the negative electrode, correlating operating conditions with the distribution of the plated species in the porous carbon electrodes. Simultaneously, the neutron transmission mode and subtractive imaging enabled visualization of hydrogen gas evolution and its dynamics within the cell. These results provide insights into the break-in behavior of phase change reactions and the distribution of the simultaneous reactive fronts of the multiphase, hybrid type of flow cell. In turn, we were able to obtain fundamental understanding of the effects of operational and design parameters, such as electrolyte composition, flow field design and flow distribution geometry, and their impact on the mass transfer characteristics and efficiency of all-iron flow batteries. Acknowledgements IGG gratefully acknowledges financial support by “la Caixa Foundation” (ID 100010434) under the fellowship number LCF/BQ/EU20/11810076. AFC gratefully acknowledges funding by the European Union (ERC, FAIR-RFB, ERC-2021-STG 101042844). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The results of this project are based on experiments performed at the Swiss Spallation Neutron Source, SINQ, Paul Scherrer Institute (Switzerland), with proposal number 20222727 References [1] Dunn, B., Kamath, H., & Tarascon, J. M. (2011). Science, 334(6058), 928-935. [2] Li, B. & Liu, J. (2017). National Science Review, 4(1), 91-105. [3] Zhang, H., & Sun, C. (2021). Journal of Power Sources, 493, 229445. [4] Zhao, A. et al. (2020) Nature¸ 579, 224 [5] Wong, A.A., Rubinstein, S.M. & Aziz, M.J. (2021) Cell Reports Physical Science 2(4), 100388 [6] Jacquemond, R.R. et al. (2023) ChemRXiv , ID 10.26434/chemrxiv-2023-8xjv5 [7] Kardjilov, N. et al. (2011) Materials. Today, 14(6) 248-256

  • Exploring Iron-Containing Electrodes for Use as Negative Electrodes of All-Iron Redox Flow Batteries

    by Inmaculada Gimenez-Garcia, Antoni Forner-Cuenca

    The transition towards a renewables-based energy economy is motivated by pressing environmental concerns and economic growth rates. This new energy paradigm necessitates efficient, robust and cost-effective, large-scale energy storage systems. Aqueous, all-iron redox flow batteries (AIRFBs) are a promising contender for large-scale energy storage, motivated by their reliance on environmentally friendly and abundant raw materials, their intrinsic safety, and projected high energy density (ca. 135 Ah L-1) [1]. However, the performance and lifetime of state-of-the-art AIRFBs are greatly limited the poor kinetics and uneven plating taking place in the negative half-cell. Traditionally, the electrochemical stack leverages carbon fiber-based electrodes (e.g. felts), which provide moderate surface area for reaction but suffer from sluggish kinetics and plated layers of poor quality [2]. Hereby, we explore the use of iron-based (e.g. pure iron, steel types 302, 316, 420) electrode alternatives to overcome the challenges of prevalent carbon fiber electrodes or pure iron. Steels have been investigated for numerous electrochemical systems, such as (microbial) fuel cells, electrolyzers and various types of batteries, displaying high performance and excellent chemical stability, robust mechanical properties and low production costs [3]. More precisely, in this work we investigate iron-based electrodes as a substitute for conventional carbon felts due to their enhanced kinetic activity in the negative half cell [Fe2+(aq)|Fe(s)]. Firstly, different metal electrodes were tested in flow-by configuration to obtain their polarization performance. Employing a flat electrode of pure alpha-iron as a baseline, we find that it displays balanced behavior between charging and discharging mode, although it exhibits very limited utilization of its projected gravimetric capacity[4]. Following this, we test a set of steel sheets of different nature, that is, ferritic, martensitic and austenitic, which contain various alloying elements (e.g., Cr, Ni, Mn, Mo, etc.) in different ratios, resulting in different electrochemical performance. We find that materials containing low to moderate Ni:Cr ratios result in enhanced iron plating and stripping kinetics, with increases ranging from ~20 to ~60% with respect to the pure alpha-iron electrode. Furthermore, we observe that the crystallographic structure of austenitic materials tend to favor reactions involving iron ions, as opposed to martensitic structures of which feature higher solid-to-gas surface energy, which favor the competing hydrogen evolution reaction [5]. We additionally investigate advanced three-dimensional structures in a symmetric, flow-through configuration, by selecting the best performing steel composition. By screening various fiber arrangements, we aim to elucidate the structural effects on mass transfer and overall cell performance. Overall, we studied the interplay between the composition and architecture of different metal-based electrodes. We hope that these findings will help shed light on their potential to improve the performance of the challenging iron plating-stripping reaction and ultimately introduce them in a full cell system to enable higher capacity and rate performance of the promising all-iron flow battery Acknowledgments IGG gratefully acknowledges financial support by “la Caixa Foundation” (ID 100010434) under the fellowship number LCF/BQ/EU20/11810076. AFC gratefully acknowledges funding by the European Union (ERC, FAIR-RFB, ERC-2021-STG 101042844). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. References [1]Hruska, L.W. & Savinell, R.F. (1981). Journal of the Electrochemical Society, 128(1), 18 [2] Noack J. et al., (2021). Journal of the Electrochemical Society, 168(4), 040529 [3] Kim, M. et al. (2022) Chemical Engineering Journal¸ 440, 135459 [4] James, B.D et al., (2016). DoE Strategic Analysis Report. [5] Gatos, H.C. (1962) Science 137(80), 311

  • Open Access

    Elucidating the Influence of Electrolyte Additives on Iron Electroplating Performance

    by Inmaculada Gimenez-Garcia, Antoni Forner-Cuenca

    Iron electroplating is a process of great interest for many large-scale industrial and emerging energy applications, such as all-iron redox flow batteries. However, the process efficiency and material lifetime are greatly conditioned and limited by the poorly understood plating process and the presence of competitive reactions. In this work, we propose a methodology to deconvolute the nucleation parameters of iron via a suite of electrochemical techniques, spectroscopy, and analytical models, coupled with microscopic and crystallographic techniques. We perform a systematic analysis with iron-based electrolytes to deconvolute the simultaneous plating and hydrogen evolution reactions, and investigate an array of additives to tune electroplating descriptors. We find that all additives studied are able to regulate the plating process and find that highly stable iron-complexes based on buffers, such as iron-borates or -citrates deliver greater overall electroplating performance. These additives show superior selectivity, with improvements in faradaic efficiencies from 60% to ~90% due to the balanced effects of enhanced nucleation and side reaction suppression. Herewith, the aim of this study is to bridge the knowledge gap between the role of additives, kinetics and efficiency of the electrodeposition reaction, and their interplay defining the quality of the resulting plated layers.

  • (Invited) Investigating the Influence of Electrolyte Additives and Anode Structures on Electroplating Performance Towards Use in Iron-Based Batteries

    by Inmaculada Gimenez-Garcia, Antoni Forner-Cuenca

    Environmental concerns and economic development motivate a shift towards an energy economy based on renewable energy sources. In this new paradigm, large scale energy storage plays a pivotal role in the integration of intermittent and fluctuating renewable energy technologies, such as wind or solar. Among the available solutions, redox flow batteries (RFBs) are promising contenders as they allow independent scaling of power and energy, have a projected long lifetime and lower costs than other battery technologies[1]. However, the most developed RFB systems to date, i.e. all vanadium-RFBs, are still not extensively deployed, due to the elevated and fluctuating costs of vanadium, and the geographical dependency on resource extraction. Iron-based flow batteries, on the contrary, rely on earth-abundant active materials and benign water as solvent, granting potential for cost-effective energy storage systems[2]. However, the efficiency of these electrochemical reactors is limited by challenges such as unoptimized electrolyte compositions, which cause parasitic generation of hydrogen gas or irregular coating distributions[3], and electrode materials that have not been optimized for this specific application. These can severely affect current density distribution, therefore conditioning the plating and stripping or detachment of plated regions (irreversible capacity loss), which limit battery efficiency and operational lifetime. Current cycle life of iron-based batteries has been reported around 2,000 while the US DOE establishes targets comprised between 1,000 to 10,000 cycles[4] Therefore, in this research we aim to understand the underlying mechanisms of iron electroplating and the key parameters which influence the resulting structures, to enhance overall iron-based battery performance. In this talk, we present our advances to improve iron-RFB efficiency and durability, focusing on the iron plating electrode. In this research, we first leverage planar, model iron surfaces in a Swagelok-type cell and employ a suite of electrochemical techniques (e.g., chronoamperometry, electrochemical impedance spectroscopy) to gain insight into the poorly understood process of iron electroplating. The experimental data is coupled with parameter fitting to pre-existing physical models[5]. Additionally, we study the influence of chelating agents, such as buffering agents, surfactants and levelers (e.g., ascorbate, tetrabutylammonium ion or thiourea, respectively), on plating phenomena and elucidate their effects on the kinetics and structure of the resulting iron coatings, as well as their cycling behavior in symmetric cell configuration. Overall, we find that buffering agents achieved the greatest improvement in terms of faradaic efficiency, resulting in moderate cell currents, while other additives, such as levelers, allow larger plating currents at the expense of limited faradaic efficiencies. In addition to electrolyte-induced effects, another bottleneck of iron-RFBs are the electrodes employed in the negative half-cell. Common electrodes rely on iron-containing films or sintered iron oxide particles to form 3D structures[6]. However, comprehensive analysis relating anode structure and composition to flow cell performance have not been addressed to date. Accordingly, we hereby study the effects of diverse types of negative electrodes. To minimize complexities emerging in porous electrodes, we first analyze the effects of electrode composition in 2D films (e.g., pure iron, doped iron or iron-carbon hybrid systems) on the cell performance via polarization. Building on these findings, and to further improve iron-RFB performance, we study the impact of electrode architecture, by introducing complex, three-dimensional porous electrodes that enable higher surface areas and mass transport rates. We find that these three-dimensional electrode structures with large pore sizes produce an enhancement in exploitable active species and increased capacity, although there arises a trade-off with the structural integrity of these 3D electrodes. With this research we hope to shed light onto the control of ion-ion, solid-liquid and solid-solid interplay for iron-based batteries to aid the design of tailored electrolytes and advanced electrodes to realize low-cost iron-based battery systems. References [1] Dunn, B., Kamath, H., & Tarascon, J. M. (2011). Science, 334(6058), 928-935. [2] Zhang, H., & Sun, C. (2021). Journal of Power Sources, 493, 229445. [3] Tucker, M. C., Phillips, A., & Weber, A. Z. (2015). ChemSusChem, 8(23), 3996-4004. [4] US Department of Energy (2020). Duration Addition to Electricity Storage (DAYS), Program Overview [5] Weinrich, H., Gehring, M., Tempel, H., Kungl, H., & Eichel, R. A. (2019). Electrochimica acta, 314, 61-71. [6] Thirumalraj, Balamurugan, et al. (2019). Journal of the American Chemical Society 141.46: 18612-18623.