Aolong Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aolong Sun has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Junwen Zhang
Fudan University
24 shared publications - Nan Chi
Fudan University
23 shared publications - Jianyang Shi
Fudan University
19 shared publications - An Yan
Fudan University
15 shared publications - Sizhe Xing
Key Laboratory for Information Science of Electromagnetic Waves (MoE), Shanghai Engineering Research Center of LEO Satellite Communication and Applications, Shanghai Collaborative Innovation Center of LEO Satellite Communication Technology, Department of Communication Science and Engineering, Fudan University, Shanghai, China
15 shared publications - Zhongya Li
Fudan University
11 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (21) , 9338-9347
Reinforcement-Learning Based Transmitter Optimization With Geometric Shaping and Pre-Equalization for Data Center Interconnect
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (21) , 9338-9347
Reinforcement-Learning Based Transmitter Optimization With Geometric Shaping and Pre-Equalization for Data Center Interconnect
- 31 July 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71662
High‐Density and High‐Throughput Transceiver Module Based on the Lithium‐Niobate‐on‐Insulator Platform
High‐density and high‐speed transceiver modules are essential for coping with the explosive growth of global data traffic. In this work, we demonstrate an ultra‐compact, high‐throughput transceiver module on the lithium‐niobate‐on‐insulator (LNOI) platform. On the transmitter side, the modulator has a footprint of only 100 µm while providing an electrical bandwidth exceeding 110 GHz, enabling 140‐Gbit/s On‐Off Keying (OOK) and 180‐Gbit/s 4‐level Pulse Amplitude (PAM4) operation per channel. Unlike micro‐ring modulators commonly implemented on LNOI, our device features a large 15‐nm free‐spectral range (FSR), theoretically supporting four channels with 3.2‐nm spacing or eight channels with 1.6‐nm spacing. The receiver side employs a multi‐channel flat‐top filter constructed from cascaded Bragg microcavities. The filter offers a 2‐nm 1‐dB bandwidth and insertion loss below 1 dB. Thanks to the tailored microcavity architecture, the total filter length is only about 250 µm. This significant footprint compression on both the transmitter and receiver sides enhances integration density and reduces overall chip area, providing a promising route toward high‐density, high‐speed transceiver modules on the LNOI platform.
- 31 July 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71662
High‐Density and High‐Throughput Transceiver Module Based on the Lithium‐Niobate‐on‐Insulator Platform
High‐density and high‐speed transceiver modules are essential for coping with the explosive growth of global data traffic. In this work, we demonstrate an ultra‐compact, high‐throughput transceiver module on the lithium‐niobate‐on‐insulator (LNOI) platform. On the transmitter side, the modulator has a footprint of only 100 µm while providing an electrical bandwidth exceeding 110 GHz, enabling 140‐Gbit/s On‐Off Keying (OOK) and 180‐Gbit/s 4‐level Pulse Amplitude (PAM4) operation per channel. Unlike micro‐ring modulators commonly implemented on LNOI, our device features a large 15‐nm free‐spectral range (FSR), theoretically supporting four channels with 3.2‐nm spacing or eight channels with 1.6‐nm spacing. The receiver side employs a multi‐channel flat‐top filter constructed from cascaded Bragg microcavities. The filter offers a 2‐nm 1‐dB bandwidth and insertion loss below 1 dB. Thanks to the tailored microcavity architecture, the total filter length is only about 250 µm. This significant footprint compression on both the transmitter and receiver sides enhances integration density and reduces overall chip area, providing a promising route toward high‐density, high‐speed transceiver modules on the LNOI platform.
- 23 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1219-1222
Efficient 180 Gb/s NRZ C-band silicon microring modulator exceeding 100 GHz bandwidth
We design and experimentally demonstrate a silicon microring modulator working in C-band based on a commercial silicon photonics platform. The device achieves a 3-dB electro-optic bandwidth exceeding 100 GHz and a low V π ·L of 0.4 V·cm at −2 V bias, enabling advanced modulation formats of 180 Gb/s NRZ and 280 Gb/s PAM-4 to operate below the 20% soft-decision forward error correction threshold of 2.4 × 10 −2 , aided by Volterra Nonlinear Equalization and Maximum Likelihood Sequence Estimation.
- 23 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1219-1222
Efficient 180 Gb/s NRZ C-band silicon microring modulator exceeding 100 GHz bandwidth
We design and experimentally demonstrate a silicon microring modulator working in C-band based on a commercial silicon photonics platform. The device achieves a 3-dB electro-optic bandwidth exceeding 100 GHz and a low V π ·L of 0.4 V·cm at −2 V bias, enabling advanced modulation formats of 180 Gb/s NRZ and 280 Gb/s PAM-4 to operate below the 20% soft-decision forward error correction threshold of 2.4 × 10 −2 , aided by Volterra Nonlinear Equalization and Maximum Likelihood Sequence Estimation.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (3) , 2968-2981
Demonstration of Transparent Polarization-Division Multiplexed Fiber–Radio–Fiber Bridge at W-Band Based on Direct Full-Photonic Conversions
The growing demands of emerging services are driving wireless communication systems toward higher data rates and capacity. However, the increasingly congested radio frequency (RF) spectrum presents a major challenge. Millimeter wave (mmWave) in the W-band (75110 GHz) offers promising solutions due to its wide available bandwidth and low atmospheric attenuation, making it an ideal candidates for future high-capacity wireless links. Direct full-photonic-aided mmWave systems, leveraging photonic up- and down-conversion techniques, enable the generation of high-quality, broadband mmWave signals and allow seamless integration with optical fiber networks. Such fiberradiofiber bridge architectures provide flexible extensions of fiber networks and various wireless applications. In this work, we present a comprehensive analysis of recent advances in photonics-aided mmWave systems and demonstrate a transparent polarization-division multiplexed (PDM) fiberradiofiber signaling bridge operating in the W-band based on direct full-photonic conversion technology. A single-channel system achieves a maximum data rate of 140 Gbit/s using 35-Gbaud/s 16-quadrature amplitude modulation (16QAM) and 155 Gbit/s using 31-Gbaud/s 32QAM over a 20-km transmission fiber, a 1-m wireless link, and a 10-km reception fiber. The bit error rate (BER) threshold is set to $2\times 10^{-2}$ , compatible with soft-decision forward error correction (SD-FEC) with 15% overhead (OH). Furthermore, by employing optical polarization-division multiplexing and a $2\times 2$ multiple input multiple output (MIMO) antenna array, we realize the full-coherent fiberwirelessfiber transmission of PDM signals. Under the same transmission configuration, the system achieves up to 66-Gbaud/s 16QAM, yielding a total data rate of 264 Gbit/s (33 Gbaud/s $\times $ two polarizations $\times 4$ bits/symbol). This demonstration surpasses a total capacity of 250 Gbit/s, significantly expanding the application potential of full-photonic mmWave wireless transmission architectures.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (3) , 2968-2981
Demonstration of Transparent Polarization-Division Multiplexed Fiber–Radio–Fiber Bridge at W-Band Based on Direct Full-Photonic Conversions
The growing demands of emerging services are driving wireless communication systems toward higher data rates and capacity. However, the increasingly congested radio frequency (RF) spectrum presents a major challenge. Millimeter wave (mmWave) in the W-band (75110 GHz) offers promising solutions due to its wide available bandwidth and low atmospheric attenuation, making it an ideal candidates for future high-capacity wireless links. Direct full-photonic-aided mmWave systems, leveraging photonic up- and down-conversion techniques, enable the generation of high-quality, broadband mmWave signals and allow seamless integration with optical fiber networks. Such fiberradiofiber bridge architectures provide flexible extensions of fiber networks and various wireless applications. In this work, we present a comprehensive analysis of recent advances in photonics-aided mmWave systems and demonstrate a transparent polarization-division multiplexed (PDM) fiberradiofiber signaling bridge operating in the W-band based on direct full-photonic conversion technology. A single-channel system achieves a maximum data rate of 140 Gbit/s using 35-Gbaud/s 16-quadrature amplitude modulation (16QAM) and 155 Gbit/s using 31-Gbaud/s 32QAM over a 20-km transmission fiber, a 1-m wireless link, and a 10-km reception fiber. The bit error rate (BER) threshold is set to $2\times 10^{-2}$ , compatible with soft-decision forward error correction (SD-FEC) with 15% overhead (OH). Furthermore, by employing optical polarization-division multiplexing and a $2\times 2$ multiple input multiple output (MIMO) antenna array, we realize the full-coherent fiberwirelessfiber transmission of PDM signals. Under the same transmission configuration, the system achieves up to 66-Gbaud/s 16QAM, yielding a total data rate of 264 Gbit/s (33 Gbaud/s $\times $ two polarizations $\times 4$ bits/symbol). This demonstration surpasses a total capacity of 250 Gbit/s, significantly expanding the application potential of full-photonic mmWave wireless transmission architectures.
- 24 December 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 14 (1) , 156
Silicon-photonics-based ultimate-simplified coherent optics with reduced DC leakage for next-generation optical access networks
Coherent passive optical network (PON) is a promising architecture that offers high sensitivity and support for advanced modulation formats. However, fully coherent systems have high complexity and cost, making them unsuitable for cost-sensitive user-end applications. Additionally, in coherent access architectures, the lasers of optical network units (ONUs) in the upstream are typically kept on rather than being switched off to avoid wavelength drift, with the Mach–Zehnder modulators (MZMs) biased at the null point for modulation. However, the limited extinction ratio (ER) of the MZM introduces direct current (DC) leakage, which degrades system performance and limits the number of users the network can support. To address this issue, we design and fabricate the first silicon-photonics-based ultimate-simplified coherent-optics chip for ONU. The simplified transmitter employs a single MZM combined with a high-speed optical switch (OS), while the simplified receiver adopts a hybrid and a standalone photodetector (PD) for coherent detection with Alamouti coding. By integrating the OS, the upstream achieves a maximum ER of 63.93 dB, while the OS switching speed meets the guard interval requirements of PON systems. Compared to a traditional single MZM with a 26 dB ER, our design achieves an additional 37.93 dB improvement, which significantly increases the user capacity in PON systems. Comprehensive experiments were conducted to validate the proposed design. Ultimately, leveraging this ultimate-simplified coherent-optics chip, a 100 Gbps bidirectional transmission was successfully demonstrated with a power budget exceeding 29 dBm, verifying its feasibility and cost-effectiveness for next-generation coherent optical access networks.
- 24 December 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 14 (1) , 156
Silicon-photonics-based ultimate-simplified coherent optics with reduced DC leakage for next-generation optical access networks
Coherent passive optical network (PON) is a promising architecture that offers high sensitivity and support for advanced modulation formats. However, fully coherent systems have high complexity and cost, making them unsuitable for cost-sensitive user-end applications. Additionally, in coherent access architectures, the lasers of optical network units (ONUs) in the upstream are typically kept on rather than being switched off to avoid wavelength drift, with the Mach–Zehnder modulators (MZMs) biased at the null point for modulation. However, the limited extinction ratio (ER) of the MZM introduces direct current (DC) leakage, which degrades system performance and limits the number of users the network can support. To address this issue, we design and fabricate the first silicon-photonics-based ultimate-simplified coherent-optics chip for ONU. The simplified transmitter employs a single MZM combined with a high-speed optical switch (OS), while the simplified receiver adopts a hybrid and a standalone photodetector (PD) for coherent detection with Alamouti coding. By integrating the OS, the upstream achieves a maximum ER of 63.93 dB, while the OS switching speed meets the guard interval requirements of PON systems. Compared to a traditional single MZM with a 26 dB ER, our design achieves an additional 37.93 dB improvement, which significantly increases the user capacity in PON systems. Comprehensive experiments were conducted to validate the proposed design. Ultimately, leveraging this ultimate-simplified coherent-optics chip, a 100 Gbps bidirectional transmission was successfully demonstrated with a power budget exceeding 29 dBm, verifying its feasibility and cost-effectiveness for next-generation coherent optical access networks.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (1) , 77-86
Bidirectional W-Band Seamless Fiber-Wireless Integration System Enabled by Full-Photonic Up/Down Conversion at Optical Network Side
As the global push toward the next frontier of wireless communications accelerates, the envisioned next generation network is expected to exploit millimeter-wave (mmWave) spectra, such as the W-band, to satisfy the surging demand for ultra-high data rates and massive capacity. To address the requirements for high-capacity transmission and ultra-dense deployments, a pivotal enabler is the mmWave fiber-wireless integrated architecture, which modulates a mmWave carrier immediately after photodetection, thereby streamlining the active antenna unit (AAU) in the radio access network. Nevertheless, existing bidirectional mmWave demonstrations still operate in lower frequency ranges, exhibit intricate architectures, and show limited synergy with optical fiber fronthaul. To address these limitations, we propose a W-band bidirectional seamless fiber-wireless integration system that implements full-photonic up-/down-conversion at the fiber optic network side. Leveraging the intrinsic ultra-wide bandwidth of photonic devices, the scheme enables direct generation and reception of broadband mmWave signals, eliminating electronic mixers and RF oscillators in the AAU, thereby reducing hardware complexity and mitigating bandwidth bottlenecks as well as electromagnetic-compatibility concerns. A centralized light-source combined with wavelength reusing further removes the need for additional lasers in the AAU. Proof-of-concept experiments demonstrate high data-rate transmission at 45.2 Gbps uplink and 128 Gbps downlink, underscoring the potential of the proposed photonic, bidirectional, seamlessly integrated fiber–wireless architecture to enhance capacity and enable flexible deployment of mmWave links in next-generation mobile networks.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (1) , 77-86
Bidirectional W-Band Seamless Fiber-Wireless Integration System Enabled by Full-Photonic Up/Down Conversion at Optical Network Side
As the global push toward the next frontier of wireless communications accelerates, the envisioned next generation network is expected to exploit millimeter-wave (mmWave) spectra, such as the W-band, to satisfy the surging demand for ultra-high data rates and massive capacity. To address the requirements for high-capacity transmission and ultra-dense deployments, a pivotal enabler is the mmWave fiber-wireless integrated architecture, which modulates a mmWave carrier immediately after photodetection, thereby streamlining the active antenna unit (AAU) in the radio access network. Nevertheless, existing bidirectional mmWave demonstrations still operate in lower frequency ranges, exhibit intricate architectures, and show limited synergy with optical fiber fronthaul. To address these limitations, we propose a W-band bidirectional seamless fiber-wireless integration system that implements full-photonic up-/down-conversion at the fiber optic network side. Leveraging the intrinsic ultra-wide bandwidth of photonic devices, the scheme enables direct generation and reception of broadband mmWave signals, eliminating electronic mixers and RF oscillators in the AAU, thereby reducing hardware complexity and mitigating bandwidth bottlenecks as well as electromagnetic-compatibility concerns. A centralized light-source combined with wavelength reusing further removes the need for additional lasers in the AAU. Proof-of-concept experiments demonstrate high data-rate transmission at 45.2 Gbps uplink and 128 Gbps downlink, underscoring the potential of the proposed photonic, bidirectional, seamlessly integrated fiber–wireless architecture to enhance capacity and enable flexible deployment of mmWave links in next-generation mobile networks.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 23103-23115
Spatial Temporal Attention-Based Target Vehicle Trajectory Prediction for Internet of Vehicles
Forecasting vehicle behavior within complex traffic environments is pivotal within Intelligent Transportation Systems (ITS). Though this technology plays a significant role in alleviating the prevalent operational difficulties in logistics and transportation systems, the precise prediction of vehicle trajectories still poses a substantial challenge. To address this, our study introduces the Spatio Temporal Attention-based methodology for Target Vehicle Trajectory Prediction (STATVTPred). This approach integrates Global Positioning System(GPS) localization technology to track target movement and dynamically predict the vehicle’s future path using comprehensive spatio-temporal trajectory data. We map the vehicle trajectory onto a directed graph, after which spatial attributes are extracted via a Graph Attention Networks(GATs). The Transformer technology is employed to yield temporal features from the sequence. These elements are then amalgamated with local road network structure maps to filter and deliver a smooth trajectory sequence, resulting in precise vehicle trajectory prediction.This study validates our proposed STATVTPred method on T-Drive and Chengdu taxi-trajectory datasets. STATVTPred achieves an AMR of 73.07% on the Beijing dataset, surpassing the Transformer by 6.38% and the LSTM Encoder-Decoder by 37.45%, while also reducing Distance Error (DE) by 26.93% and 20.95% in Beijing and Chengdu, respectively, also much lower than the baseline results. This is expected to establish STATVTPred as a new approach for handling trajectory prediction of targets in logistics and transportation scenarios, thereby enhancing prediction accuracy.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 23103-23115
Spatial Temporal Attention-Based Target Vehicle Trajectory Prediction for Internet of Vehicles
Forecasting vehicle behavior within complex traffic environments is pivotal within Intelligent Transportation Systems (ITS). Though this technology plays a significant role in alleviating the prevalent operational difficulties in logistics and transportation systems, the precise prediction of vehicle trajectories still poses a substantial challenge. To address this, our study introduces the Spatio Temporal Attention-based methodology for Target Vehicle Trajectory Prediction (STATVTPred). This approach integrates Global Positioning System(GPS) localization technology to track target movement and dynamically predict the vehicle’s future path using comprehensive spatio-temporal trajectory data. We map the vehicle trajectory onto a directed graph, after which spatial attributes are extracted via a Graph Attention Networks(GATs). The Transformer technology is employed to yield temporal features from the sequence. These elements are then amalgamated with local road network structure maps to filter and deliver a smooth trajectory sequence, resulting in precise vehicle trajectory prediction.This study validates our proposed STATVTPred method on T-Drive and Chengdu taxi-trajectory datasets. STATVTPred achieves an AMR of 73.07% on the Beijing dataset, surpassing the Transformer by 6.38% and the LSTM Encoder-Decoder by 37.45%, while also reducing Distance Error (DE) by 26.93% and 20.95% in Beijing and Chengdu, respectively, also much lower than the baseline results. This is expected to establish STATVTPred as a new approach for handling trajectory prediction of targets in logistics and transportation scenarios, thereby enhancing prediction accuracy.
- 7 October 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (11) , 984
Upstream receiver IQ impairment analysis and compensation in coherent digital subcarrier multiplexing passive optical networks
The growing demand for high-capacity and flexible access has made digital subcarrier multiplexing (DSCM)-based coherent passive optical networks (PONs) increasingly attractive. However, in upstream transmission, amplitude, phase, and skew mismatches between the in-phase (I) and quadrature (Q) branches at the receiver of the optical line terminal may lead to image interference between symmetric subcarriers, thus degrading the system performance. To address this issue, this work theoretically analyzes the impairment mechanism and proposes a data-aided 8×4 real-valued multi-input multi-output (MIMO) equalization scheme for joint compensation. To our knowledge, this is the first experimental demonstration of MIMO-based subcarrier joint equalization for receiver IQ impairment compensation in the burst-mode upstream reception. Experimental results show that the proposed MIMO achieves stable compensation for IQ skew up to ±40ps and IQ gain imbalance from −8 to +7dB in dual-subcarrier systems, while maintaining a Q-penalty within 0.5 dB under frequency offsets up to 500 MHz. A 400G TFDM-PON upstream system is further demonstrated, achieving −29.1dBm receiver sensitivity and a 32.1 dB power budget. These results provide a practical solution for IQ impairment mitigation and support robust, scalable deployment of coherent DSCM-based access networks.
- 7 October 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (11) , 984
Upstream receiver IQ impairment analysis and compensation in coherent digital subcarrier multiplexing passive optical networks
The growing demand for high-capacity and flexible access has made digital subcarrier multiplexing (DSCM)-based coherent passive optical networks (PONs) increasingly attractive. However, in upstream transmission, amplitude, phase, and skew mismatches between the in-phase (I) and quadrature (Q) branches at the receiver of the optical line terminal may lead to image interference between symmetric subcarriers, thus degrading the system performance. To address this issue, this work theoretically analyzes the impairment mechanism and proposes a data-aided 8×4 real-valued multi-input multi-output (MIMO) equalization scheme for joint compensation. To our knowledge, this is the first experimental demonstration of MIMO-based subcarrier joint equalization for receiver IQ impairment compensation in the burst-mode upstream reception. Experimental results show that the proposed MIMO achieves stable compensation for IQ skew up to ±40ps and IQ gain imbalance from −8 to +7dB in dual-subcarrier systems, while maintaining a Q-penalty within 0.5 dB under frequency offsets up to 500 MHz. A 400G TFDM-PON upstream system is further demonstrated, achieving −29.1dBm receiver sensitivity and a 32.1 dB power budget. These results provide a practical solution for IQ impairment mitigation and support robust, scalable deployment of coherent DSCM-based access networks.
- 23 September 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (10) , 2831
On-chip multi-band mode-division multiplexed optical interconnect using ultra-broadband inverse-designed digital metamaterials
Optical interconnects based on photonic integrated circuits (PICs) are emerging as a pivotal technology to address the relentless surge in data traffic driven by compute-intensive applications. Combining mode-division multiplexing (MDM) with wavelength-division multiplexing (WDM) offers a compelling approach to significantly enhance the shoreline density of optical interconnects. However, existing on-chip MDM systems encounter considerable challenges in simultaneously achieving a large optical bandwidth, multi-band operation, and ultra-compactness, thereby limiting scalability as conventional telecom band resources become increasingly constrained. Here we introduce, to our knowledge, the first inverse-designed multi-band mode multiplexer (MUX) utilizing a digital metamaterial structure to support the first three-order TE modes. The proposed device features an ultra-compact footprint of 6 μm×4.8 μm and exhibits an exceptionally flat spectral response, with numerical simulations confirming spectral variations of less than 0.94 dB across the 1500–2100 nm range. Experimental results further validate its performance, demonstrating insertion losses below 4.3 dB and 4.0 dB, and crosstalk below −11.6 dB and −11.3 dB, within the 1525–1585 nm and 1940–2040 nm bands, respectively. Additionally, system-level optical interconnect experiments using a multi-band MDM circuit successfully achieve single-wavelength transmission rates of 3-modes×180 Gb/s at the 1.55 μm band and record-setting 3-modes×114 Gb/s in the 2 μm band. This work highlights the transformative potential of employing multi-band MDM technology to enhance bandwidth density and scalability, providing a robust foundation for next-generation high-capacity on-chip optical interconnects.
- 23 September 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (10) , 2831
On-chip multi-band mode-division multiplexed optical interconnect using ultra-broadband inverse-designed digital metamaterials
Optical interconnects based on photonic integrated circuits (PICs) are emerging as a pivotal technology to address the relentless surge in data traffic driven by compute-intensive applications. Combining mode-division multiplexing (MDM) with wavelength-division multiplexing (WDM) offers a compelling approach to significantly enhance the shoreline density of optical interconnects. However, existing on-chip MDM systems encounter considerable challenges in simultaneously achieving a large optical bandwidth, multi-band operation, and ultra-compactness, thereby limiting scalability as conventional telecom band resources become increasingly constrained. Here we introduce, to our knowledge, the first inverse-designed multi-band mode multiplexer (MUX) utilizing a digital metamaterial structure to support the first three-order TE modes. The proposed device features an ultra-compact footprint of 6 μm×4.8 μm and exhibits an exceptionally flat spectral response, with numerical simulations confirming spectral variations of less than 0.94 dB across the 1500–2100 nm range. Experimental results further validate its performance, demonstrating insertion losses below 4.3 dB and 4.0 dB, and crosstalk below −11.6 dB and −11.3 dB, within the 1525–1585 nm and 1940–2040 nm bands, respectively. Additionally, system-level optical interconnect experiments using a multi-band MDM circuit successfully achieve single-wavelength transmission rates of 3-modes×180 Gb/s at the 1.55 μm band and record-setting 3-modes×114 Gb/s in the 2 μm band. This work highlights the transformative potential of employing multi-band MDM technology to enhance bandwidth density and scalability, providing a robust foundation for next-generation high-capacity on-chip optical interconnects.
- 11 September 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (1) , A9-A18
Simplified coherent TDM-PON in upstream burst-mode detection with enhanced DC leakage tolerance
This paper investigates the generation and impact of optical DC leakage in upstream burst-mode coherent TDM-PON systems. In upstream burst transmission, the laser remains on to avoid wavelength drift even when the optical network unit (ONU) is inactive, leading to the generation of residual DC leakage caused by a limited modulator extinction ratio and bias drift from the null point. As the number of ONUs increases, the accumulated optical DC leakage becomes large. In a more extreme case, where the optical signal comes from a distant ONU and all the other inactive ONUs are located close to the optical line terminal, the accumulated DC power can even exceed the signal power, resulting in SNR degradation and increased quantization noise. To address these challenges, we propose a flipped-frequency heterodyne detection scheme combined with SCM signaling. This approach upconverts the DC tones from low-frequency regions to high-frequency regions, allowing DC leakage to be effectively filtered out by the bandwidth-limited receiver before analog-to-digital conversion. As a proof of concept, we analyze the impact of DC leakage in both the time and frequency domains, compare the DC tolerance of PAM and SCM under different detection schemes, and support our findings with both simulation and experimental results. Finally, a 200G upstream simplified coherent TDM-PON system is experimentally demonstrated, showing up to 18 dB improvement in DC leakage tolerance compared to a baseband PAM4 signal at the 29 dB N1 class loss budget.
- 11 September 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (1) , A9-A18
Simplified coherent TDM-PON in upstream burst-mode detection with enhanced DC leakage tolerance
This paper investigates the generation and impact of optical DC leakage in upstream burst-mode coherent TDM-PON systems. In upstream burst transmission, the laser remains on to avoid wavelength drift even when the optical network unit (ONU) is inactive, leading to the generation of residual DC leakage caused by a limited modulator extinction ratio and bias drift from the null point. As the number of ONUs increases, the accumulated optical DC leakage becomes large. In a more extreme case, where the optical signal comes from a distant ONU and all the other inactive ONUs are located close to the optical line terminal, the accumulated DC power can even exceed the signal power, resulting in SNR degradation and increased quantization noise. To address these challenges, we propose a flipped-frequency heterodyne detection scheme combined with SCM signaling. This approach upconverts the DC tones from low-frequency regions to high-frequency regions, allowing DC leakage to be effectively filtered out by the bandwidth-limited receiver before analog-to-digital conversion. As a proof of concept, we analyze the impact of DC leakage in both the time and frequency domains, compare the DC tolerance of PAM and SCM under different detection schemes, and support our findings with both simulation and experimental results. Finally, a 200G upstream simplified coherent TDM-PON system is experimentally demonstrated, showing up to 18 dB improvement in DC leakage tolerance compared to a baseband PAM4 signal at the 29 dB N1 class loss budget.