Eliana Lozano Sanchez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eliana Lozano Sanchez has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Maria Maigaard Paulsen
Center for Green Chemistry & Green Engineering, School of the Environment, Yale University, New Haven, CT, 06511, USA
2 shared publications - Sebastian Bruhn Petersen
AAU Energy Aalborg University, Pontoppidanstræde 111, 9220, Aalborg, Denmark
2 shared publications T.H. Pedersen
2 shared publicationsThomas Helmer Pedersen
AAU Energy Aalborg University, Pontoppidanstræde 111, 9220, Aalborg, Denmark
2 shared publicationsAndrea Ramirez
Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, Delft, the Netherlands
1 shared publicationErik Lopez-Basto
Cartagena Refinery. Ecopetrol S.A., Colombia
1 shared publication
Latest Publications
- Open Access
- 1 July 2025
- Published by The CACHE Foundation, Inc. in Systems and Control Transactions
- Vol. 4, 509-514
Valorization of refinery fuel gas and biogenic gases from thermochemical conversion into low-carbon methanol
By-product fuel gases from refinery operations are a major heat source in fossil refineries and their availability poses a challenge to the deployment of low-carbon heat sources. This study evaluates the valorization of refinery fuel gases (RFG) into low-carbon methanol via co-processing with residual biogenic gas streams from biomass thermochemical conversion. Results from techno-economic analysis indicate that up to 44 wt.% of biogenic blend is possible without the need for external hydrogen supply, while electricity and heat requirements per tonne of methanol change by -4 % and + 80% respectively. Nevertheless, at the 44 wt.% blend, the estimated methanol cost increases only by 2.4 % (0.43 EUR/kg), while the reduction in methanol carbon intensity is approximately 40 %. This highlights promising benefits that can contribute to the integration of bio-oils producing technologies within fossil refineries.
- 1 July 2025
- Published by The CACHE Foundation, Inc. in Systems and Control Transactions
- Vol. 4, 509-514
Open AccessValorization of refinery fuel gas and biogenic gases from thermochemical conversion into low-carbon methanol
By-product fuel gases from refinery operations are a major heat source in fossil refineries and their availability poses a challenge to the deployment of low-carbon heat sources. This study evaluates the valorization of refinery fuel gases (RFG) into low-carbon methanol via co-processing with residual biogenic gas streams from biomass thermochemical conversion. Results from techno-economic analysis indicate that up to 44 wt.% of biogenic blend is possible without the need for external hydrogen supply, while electricity and heat requirements per tonne of methanol change by -4 % and + 80% respectively. Nevertheless, at the 44 wt.% blend, the estimated methanol cost increases only by 2.4 % (0.43 EUR/kg), while the reduction in methanol carbon intensity is approximately 40 %. This highlights promising benefits that can contribute to the integration of bio-oils producing technologies within fossil refineries.
- 6 January 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (3) , 879-890
Impact of adsorption kinetics on the integration of temperature vacuum swing adsorption-based direct air capture (TVSA-DAC) with e-methanol production
Understanding the integration potential of direct air capture (DAC) with carbon utilisation processes can help pave the way for DAC to become an essential part of the solution towards carbon neutrality. In this study, we provide a detailed technical assessment of an integrated system using direct air capture based on temperature-vacuum-swing-adsorption (TVSA-DAC) as the carbon source for e-methanol production. The integration potential is evaluated in terms of technical compatibility, heat integration, water management, and overall energy efficiency. A specific focus is given to the TVSA-DAC process considering the uncertainty of the available adsorption mass transfer kinetics. It is found that the CO2-productivity ranges from 0.23–13.35 kg CO2 m−3 h−1 given an interval for the CO2 mass transfer coefficient of 0.0001–0.1 s−1 in which the highest productivity is obtained using a steam sweep during desorption. The potential to achieve a steady CO2 output from the TVSA-DAC is proven; however, the complexity of the integrated design configuration depends greatly on the adsorption kinetics. Generally, a well-aligned heat integration with no external heat demand for the combined system can be achieved using high-temperature heat pumps to facilitate favourable heat recovery from the electrolysis. Furthermore, the integrated system can be water self-sufficient and even net producing at a relative humidity above 50% due to the co-capture of water in the TVSA-DAC process. The overall energy efficiency can reach up to 52% for the integrated system.
- 6 January 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (3) , 879-890
Impact of adsorption kinetics on the integration of temperature vacuum swing adsorption-based direct air capture (TVSA-DAC) with e-methanol production
Understanding the integration potential of direct air capture (DAC) with carbon utilisation processes can help pave the way for DAC to become an essential part of the solution towards carbon neutrality. In this study, we provide a detailed technical assessment of an integrated system using direct air capture based on temperature-vacuum-swing-adsorption (TVSA-DAC) as the carbon source for e-methanol production. The integration potential is evaluated in terms of technical compatibility, heat integration, water management, and overall energy efficiency. A specific focus is given to the TVSA-DAC process considering the uncertainty of the available adsorption mass transfer kinetics. It is found that the CO2-productivity ranges from 0.23–13.35 kg CO2 m−3 h−1 given an interval for the CO2 mass transfer coefficient of 0.0001–0.1 s−1 in which the highest productivity is obtained using a steam sweep during desorption. The potential to achieve a steady CO2 output from the TVSA-DAC is proven; however, the complexity of the integrated design configuration depends greatly on the adsorption kinetics. Generally, a well-aligned heat integration with no external heat demand for the combined system can be achieved using high-temperature heat pumps to facilitate favourable heat recovery from the electrolysis. Furthermore, the integrated system can be water self-sufficient and even net producing at a relative humidity above 50% due to the co-capture of water in the TVSA-DAC process. The overall energy efficiency can reach up to 52% for the integrated system.
- Open Access
- 5 June 2024
- Published by Elsevier in Applied Energy
- Vol. 369
Techno-economic study of integrated high-temperature direct air capture with hydrogen-based calcination and Fischer–Tropsch synthesis for jet fuel production
- 5 June 2024
- Published by Elsevier in Applied Energy
- Vol. 369
Open AccessTechno-economic study of integrated high-temperature direct air capture with hydrogen-based calcination and Fischer–Tropsch synthesis for jet fuel production
- Open Access
- 22 April 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (17) , 7708-7726
Integrated e-Methanol and Drop-in Fuels Hydrothermal Liquefaction Platform─Techno-Economic and GHG Emissions Assessment for Grid-Connected Plants under Flexible BECCU(S) Operation
This study examines the combined production of drop-in fuels and methanol using hydrothermal liquefaction (HTL) as a technological basis in the context of bioenergy and power-to-X (PtX) applications. Given the increasing need for flexibility in a system dominated by fluctuating renewable power, we evaluated flexible methanol operation as a strategy to harness global greenhouse gas (GHG) emissions in a grid-connected HTL setup. In this operation, the biogenic CO2 destination is alternated between methanol synthesis bioenergy with carbon capture and utilization and combined underground storage depending on the hourly electricity price and grid carbon intensity. The results indicate that the strategy has potential to maintain the average fuel carbon intensity within the 65% GHG reduction threshold set by the renewable energy directive III at a minimum methanol price of 870 EUR/t. This approach could facilitate implementation as it does not require dedicated renewable power generation and hydrogen storage, potentially decreasing costs compared to semi-islands and off-grid PtX systems.
- 22 April 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (17) , 7708-7726
Open AccessIntegrated e-Methanol and Drop-in Fuels Hydrothermal Liquefaction Platform─Techno-Economic and GHG Emissions Assessment for Grid-Connected Plants under Flexible BECCU(S) Operation
This study examines the combined production of drop-in fuels and methanol using hydrothermal liquefaction (HTL) as a technological basis in the context of bioenergy and power-to-X (PtX) applications. Given the increasing need for flexibility in a system dominated by fluctuating renewable power, we evaluated flexible methanol operation as a strategy to harness global greenhouse gas (GHG) emissions in a grid-connected HTL setup. In this operation, the biogenic CO2 destination is alternated between methanol synthesis bioenergy with carbon capture and utilization and combined underground storage depending on the hourly electricity price and grid carbon intensity. The results indicate that the strategy has potential to maintain the average fuel carbon intensity within the 65% GHG reduction threshold set by the renewable energy directive III at a minimum methanol price of 870 EUR/t. This approach could facilitate implementation as it does not require dedicated renewable power generation and hydrogen storage, potentially decreasing costs compared to semi-islands and off-grid PtX systems.
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 254
Modeling of thermochemically liquefied biomass products and heat of formation for process energy assessment
- 1 November 2019
- Published by Elsevier in Applied Energy
- Vol. 254
Modeling of thermochemically liquefied biomass products and heat of formation for process energy assessment