Bin Ou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bin Ou has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Shuyan Fu
College of Water Conservancy, Yunnan Agricultural University, Kunming 650201, China
4 shared publications - Bo Xu
College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou 225009, China
2 shared publications - Dehui Chen
College of Water Conservancy, Yunnan Agricultural University, Kunming 650201, China
2 shared publications - Haoquan Chi
College of Water Conservancy, Yunnan Agricultural University, Kunming 650201, China
2 shared publications Mingfang Wei
2 shared publicationsShuyan Fu
2 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Dual-Constrained Robust ERT Inversion and Quasi-3D Imaging of Earth–Rockfill Dams under Electrode–Ground Contact Noise
High electrode grounding resistance under complex near-surface conditions can introduce outliers into electrical resistivity tomography (ERT) data, degrading inversion accuracy and generating spurious high-resistivity artifacts. This study proposes a dual-constrained robust inversion strategy that combines prior information on grounding resistance with an L1-norm statistical constraint (the Rg+L1 strategy). First, a dynamic adaptive threshold function (DATF) establishes a physically informed cutoff for distorted measurements by jointly considering instrument parameters, background noise levels, and the statistical distribution of grounding resistance. An L1-norm constraint and a grounding-resistance-based weighting matrix are then incorporated into the inversion objective function to limit the influence of residual non-Gaussian noise on model updates. Numerical simulations show that, even with 20% outlier contamination, the method constrains Jacobian distortion, limits the relative model error to approximately 10%, and preserves the geometry of the target anomaly. Application to the auxiliary dam of Guihuaqing Reservoir further demonstrates that the Rg+L1 strategy suppresses shallow high-resistivity shielding associated with dry-laid masonry and reduces the data-misfit value to 1.7%. Quasi-3D visualization delineates a continuous low-resistivity anomaly near the dam-foundation contact. This interpretation is supported by a fractured zone encountered during drilling, water pressure-test values of up to 40 Lu, a downstream triangular-weir discharge of 12.14 L/s, and a strong relationship between rock quality designation (RQD) and inverted resistivity (R² = 0.954). These results indicate that the Rg+L1 strategy suppresses the propagation of contact noise by combining physical prior information with statistical robustness. The method provides a practical approach to stable ERT inversion and reliable anomaly imaging in earth-rockfill dams under challenging surface conditions.
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDual-Constrained Robust ERT Inversion and Quasi-3D Imaging of Earth–Rockfill Dams under Electrode–Ground Contact Noise
High electrode grounding resistance under complex near-surface conditions can introduce outliers into electrical resistivity tomography (ERT) data, degrading inversion accuracy and generating spurious high-resistivity artifacts. This study proposes a dual-constrained robust inversion strategy that combines prior information on grounding resistance with an L1-norm statistical constraint (the Rg+L1 strategy). First, a dynamic adaptive threshold function (DATF) establishes a physically informed cutoff for distorted measurements by jointly considering instrument parameters, background noise levels, and the statistical distribution of grounding resistance. An L1-norm constraint and a grounding-resistance-based weighting matrix are then incorporated into the inversion objective function to limit the influence of residual non-Gaussian noise on model updates. Numerical simulations show that, even with 20% outlier contamination, the method constrains Jacobian distortion, limits the relative model error to approximately 10%, and preserves the geometry of the target anomaly. Application to the auxiliary dam of Guihuaqing Reservoir further demonstrates that the Rg+L1 strategy suppresses shallow high-resistivity shielding associated with dry-laid masonry and reduces the data-misfit value to 1.7%. Quasi-3D visualization delineates a continuous low-resistivity anomaly near the dam-foundation contact. This interpretation is supported by a fractured zone encountered during drilling, water pressure-test values of up to 40 Lu, a downstream triangular-weir discharge of 12.14 L/s, and a strong relationship between rock quality designation (RQD) and inverted resistivity (R² = 0.954). These results indicate that the Rg+L1 strategy suppresses the propagation of contact noise by combining physical prior information with statistical robustness. The method provides a practical approach to stable ERT inversion and reliable anomaly imaging in earth-rockfill dams under challenging surface conditions.
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1)
Experimental Investigation of the Macro‐ and Mesoscale Mechanical Behavior of Rockfill Materials Under the Coupled Effects of Coarse‐Particle Content and Confining Pressure
This study investigates the macro‐meso mechanical evolution of dam rockfill under the coupled effects of coarse‐particle content ( P 5 ) and confining pressure ( σ 3 ) using large‐scale triaxial tests and PFC3D simulations. The results show (1) shear strength and particle breakage depend synergistically on σ 3 and P 5 . For example, at P 5 = 38.02%, increasing σ 3 (200–800 kPa) raises Marsal’s breakage index from 3.87% to 8.64%. At a constant σ 3 , increasing P 5 (27.56% to 70.77%) further elevates breakage from 7.41% to 9.12%. (2) Meso‐kinematics quantify the granular skeleton’s transition from a “suspended” to an “interlocking” state. Higher P 5 shifts the displacement field from unilateral eccentric to uniform concentric gradients, shrinking the >12 mm “long‐tail” in probability density and proving that interlocking restrains extreme localized slip. (3) A critical percolation threshold emerges at P 5 = 61.34%, marked by an anomalous rightward shift of the main displacement peak. This reflects global dilatancy induced by particles overriding interlocking resistance, which retracts at P 5 = 70.77% as particle mobility limits lock. (4) Topological reshaping of the contact network dictates microcrack anisotropy. Higher P 5 increases rigid contacts, raising total microcracks by ~6%. Consequently, crack distribution transitions from random to highly anisotropic, aligning with major force chain conjugates. Ultimately, this elucidates the failure mechanism transition from “loose slip failure” to “structural shear dislocation,” providing a scientific basis for assessing high earth‐rock dam stability.
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1)
Open AccessExperimental Investigation of the Macro‐ and Mesoscale Mechanical Behavior of Rockfill Materials Under the Coupled Effects of Coarse‐Particle Content and Confining Pressure
This study investigates the macro‐meso mechanical evolution of dam rockfill under the coupled effects of coarse‐particle content ( P 5 ) and confining pressure ( σ 3 ) using large‐scale triaxial tests and PFC3D simulations. The results show (1) shear strength and particle breakage depend synergistically on σ 3 and P 5 . For example, at P 5 = 38.02%, increasing σ 3 (200–800 kPa) raises Marsal’s breakage index from 3.87% to 8.64%. At a constant σ 3 , increasing P 5 (27.56% to 70.77%) further elevates breakage from 7.41% to 9.12%. (2) Meso‐kinematics quantify the granular skeleton’s transition from a “suspended” to an “interlocking” state. Higher P 5 shifts the displacement field from unilateral eccentric to uniform concentric gradients, shrinking the >12 mm “long‐tail” in probability density and proving that interlocking restrains extreme localized slip. (3) A critical percolation threshold emerges at P 5 = 61.34%, marked by an anomalous rightward shift of the main displacement peak. This reflects global dilatancy induced by particles overriding interlocking resistance, which retracts at P 5 = 70.77% as particle mobility limits lock. (4) Topological reshaping of the contact network dictates microcrack anisotropy. Higher P 5 increases rigid contacts, raising total microcracks by ~6%. Consequently, crack distribution transitions from random to highly anisotropic, aligning with major force chain conjugates. Ultimately, this elucidates the failure mechanism transition from “loose slip failure” to “structural shear dislocation,” providing a scientific basis for assessing high earth‐rock dam stability.
- Open Access
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1)
Interval Prediction Model for Seepage Flow in Earth–Rock Dams Based on Time Series Characteristics
To address challenges posed by insufficient feature extraction, difficulties in capturing complex patterns, limited prediction accuracy, and unquantified uncertainty inherent in traditional point prediction models for complex time series data, this study proposes a novel interval prediction framework based on temporal convolutional network (TCN)–bidirectional gated recurrent unit (BiGRU)–self‐attention mechanism (SATT)–adaptive bandwidth kernel density estimation (ABKDE), specifically tailored for earth–rock dam seepage flow prediction. Initially, the TCN is employed to extract essential temporal features from seepage monitoring data. Subsequently, these extracted features are input into a BiGRU, effectively capturing both historical dependencies and future‐oriented information. Following this, a SATT dynamically assigns weights to critical features, thereby enhancing the predictive relevance and forming a high‐accuracy point prediction model. Finally, utilizing point prediction error distributions combined with ABKDE and bootstrap methodology, statistically robust intervals at multiple confidence levels are constructed. This integrated approach comprehensively addresses feature extraction, complex time series modeling, and uncertainty quantification. The case conducted demonstrates that the proposed TCN–BiGRU–SATT model consistently outperforms both benchmark models and the simpler BiGRU–SATT in evaluation metrics, indicating superior accuracy and stability. Leveraging residuals derived from point predictions, the ABKDE component adaptively adjusts bandwidths, effectively capturing and quantifying the uncertainty inherent in predictions. Performance metrics at distinct confidence intervals surpass those obtained using conventional kernel density estimation (KDE), confirming greater adaptability and responsiveness to variations in data. Specifically, at confidence levels of 85%, 90%, and 95%, the integrated evaluation index F attains values of 1.6447, 1.5821, and 1.3885, respectively, corresponding to improvements of 9.02%, 9.59%, and 4.05% over the KDE method. These findings underscore the practical value and potential applicability of the proposed methodology in engineering contexts.
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1)
Open AccessInterval Prediction Model for Seepage Flow in Earth–Rock Dams Based on Time Series Characteristics
To address challenges posed by insufficient feature extraction, difficulties in capturing complex patterns, limited prediction accuracy, and unquantified uncertainty inherent in traditional point prediction models for complex time series data, this study proposes a novel interval prediction framework based on temporal convolutional network (TCN)–bidirectional gated recurrent unit (BiGRU)–self‐attention mechanism (SATT)–adaptive bandwidth kernel density estimation (ABKDE), specifically tailored for earth–rock dam seepage flow prediction. Initially, the TCN is employed to extract essential temporal features from seepage monitoring data. Subsequently, these extracted features are input into a BiGRU, effectively capturing both historical dependencies and future‐oriented information. Following this, a SATT dynamically assigns weights to critical features, thereby enhancing the predictive relevance and forming a high‐accuracy point prediction model. Finally, utilizing point prediction error distributions combined with ABKDE and bootstrap methodology, statistically robust intervals at multiple confidence levels are constructed. This integrated approach comprehensively addresses feature extraction, complex time series modeling, and uncertainty quantification. The case conducted demonstrates that the proposed TCN–BiGRU–SATT model consistently outperforms both benchmark models and the simpler BiGRU–SATT in evaluation metrics, indicating superior accuracy and stability. Leveraging residuals derived from point predictions, the ABKDE component adaptively adjusts bandwidths, effectively capturing and quantifying the uncertainty inherent in predictions. Performance metrics at distinct confidence intervals surpass those obtained using conventional kernel density estimation (KDE), confirming greater adaptability and responsiveness to variations in data. Specifically, at confidence levels of 85%, 90%, and 95%, the integrated evaluation index F attains values of 1.6447, 1.5821, and 1.3885, respectively, corresponding to improvements of 9.02%, 9.59%, and 4.05% over the KDE method. These findings underscore the practical value and potential applicability of the proposed methodology in engineering contexts.
- Open Access
- 24 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7096
A Multi-Input Multi-Output Considering Correlation and Hysteresis Prediction Method for Gravity Dam Displacement with Interpretative Functions
The displacement of a concrete gravity dam is a direct manifestation of its deformation. It provides an intuitive reflection of the dam’s overall operational behavior and serves as a key indicator of the dam’s safe operating condition. In this paper, we propose a factor set that considers the hysteresis effects of temperature on displacement and ranks the importance of the features to select the optimal factor sets at different measurement points by the ReliefF method. Then, we realize the simultaneous prediction of the displacements at multiple measurement points by the multi-input multi-output least-squares support vector machine with particle swarm optimization (MIMO-PSO-LSSVM). The case study demonstrates that this method effectively enhances the accuracy and efficiency of gravity dam displacement prediction, thereby providing a novel reference for dam safety monitoring and health service diagnosis.
- 24 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7096
Open AccessA Multi-Input Multi-Output Considering Correlation and Hysteresis Prediction Method for Gravity Dam Displacement with Interpretative Functions
The displacement of a concrete gravity dam is a direct manifestation of its deformation. It provides an intuitive reflection of the dam’s overall operational behavior and serves as a key indicator of the dam’s safe operating condition. In this paper, we propose a factor set that considers the hysteresis effects of temperature on displacement and ranks the importance of the features to select the optimal factor sets at different measurement points by the ReliefF method. Then, we realize the simultaneous prediction of the displacements at multiple measurement points by the multi-input multi-output least-squares support vector machine with particle swarm optimization (MIMO-PSO-LSSVM). The case study demonstrates that this method effectively enhances the accuracy and efficiency of gravity dam displacement prediction, thereby providing a novel reference for dam safety monitoring and health service diagnosis.
- Open Access
Study on the Mechanical and Mesoscopic Properties of Rockfill Under Various Confining Pressures
To investigate the mechanical response characteristics of damming rockfill materials under different confining pressure conditions, this study integrates laboratory triaxial compression tests and PFC2D numerical simulations to systematically analyze their deformation evolution and failure mechanisms from both macroscopic and microscopic perspectives. Laboratory triaxial test results demonstrate that as the confining pressure increases, the peak deviatoric stress rises significantly, with the shear strength of specimens increasing from 769.43 kPa to 2140.98 kPa. Under low confining pressure, rockfill exhibits pronounced dilative behavior, whereas at high confining pressure, it transitions to contractive behavior. Additionally, particle breakage intensifies with increasing confinement, with the breakage rate rising from 4.25% to 8.33%. This particle fragmentation alters the granular skeleton structure, thereby affecting the overall mechanical properties and leading to a reduction in shear strength. Numerical simulations further reveal the micromechanical mechanisms governing rockfill behavior. The simulation results show a shear strength increase from 572.39 kPa to 2059.26 kPa, exhibiting a trend consistent with experimental findings. The shear failure mode manifests as a characteristic “X-shaped” shear band distribution, while at high confining pressures, shear fracture propagation is effectively inhibited, enhancing the overall structural stability. Furthermore, increasing confining pressure promotes denser interparticle contacts, with contact numbers increasing from 16,140 to 18,932 and the maximum contact force rising from 12.19 kN to 59.83 kN. The quantity and frequency of both strong and weak force chains also increase significantly, further influencing the mechanical response of the material. These findings provide deeper insights into the mechanical behavior of rockfill materials under varying confining pressures and offer theoretical guidance and engineering references for dam stability assessment and construction optimization.
Open AccessStudy on the Mechanical and Mesoscopic Properties of Rockfill Under Various Confining Pressures
To investigate the mechanical response characteristics of damming rockfill materials under different confining pressure conditions, this study integrates laboratory triaxial compression tests and PFC2D numerical simulations to systematically analyze their deformation evolution and failure mechanisms from both macroscopic and microscopic perspectives. Laboratory triaxial test results demonstrate that as the confining pressure increases, the peak deviatoric stress rises significantly, with the shear strength of specimens increasing from 769.43 kPa to 2140.98 kPa. Under low confining pressure, rockfill exhibits pronounced dilative behavior, whereas at high confining pressure, it transitions to contractive behavior. Additionally, particle breakage intensifies with increasing confinement, with the breakage rate rising from 4.25% to 8.33%. This particle fragmentation alters the granular skeleton structure, thereby affecting the overall mechanical properties and leading to a reduction in shear strength. Numerical simulations further reveal the micromechanical mechanisms governing rockfill behavior. The simulation results show a shear strength increase from 572.39 kPa to 2059.26 kPa, exhibiting a trend consistent with experimental findings. The shear failure mode manifests as a characteristic “X-shaped” shear band distribution, while at high confining pressures, shear fracture propagation is effectively inhibited, enhancing the overall structural stability. Furthermore, increasing confining pressure promotes denser interparticle contacts, with contact numbers increasing from 16,140 to 18,932 and the maximum contact force rising from 12.19 kN to 59.83 kN. The quantity and frequency of both strong and weak force chains also increase significantly, further influencing the mechanical response of the material. These findings provide deeper insights into the mechanical behavior of rockfill materials under varying confining pressures and offer theoretical guidance and engineering references for dam stability assessment and construction optimization.
- Open Access
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
A Multipoint Spatiotemporal Prediction Model for Concrete Dams Integrating Hybrid Clustering and Adaptive Decomposition‐Optimization Mechanisms
The displacement evolution of concrete dams serves as a key indicator of their structural safety. Establishing an accurate and reliable model for predicting displacement is essential for effective dam monitoring. Nevertheless, current multi‐point forecasting approaches often overlook the interdependencies among deformation drivers and lack robust validation techniques to assess generalization capability and stability. This shortcoming hinders the accurate representation of deformation behavior under complex loading scenarios. To overcome these issues, this research introduces a spatiotemporal prediction model for concrete dams that combines hybrid clustering with adaptive decomposition and optimization strategies. Initially, the SOM‐K‐means method is employed to clusters monitoring points, followed by spatial correlation analysis to uncover interpoint relationships. Clustering performance is quantitatively evaluated using a composite assessment technique. During model development, hydrostatic pressures are derived through finite element simulation, and sensitivity analysis is applied to gauge the influence of environmental variables on deformation. Furthermore, the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Mean Impact Value (MIV) techniques are employed to decompose and select deformation features. Tests show that the proposed model achieves superior predictive accuracy within clustered zones ( R 2 > 0.98, compared to Transformer: 0.9673 and CNN‐BiLSTM: 0.9501). Validation across multiple dam types further confirms the framework’s broad applicability and resilience. By incorporating spatiotemporal analysis, this method enables regionalized health monitoring and integrates data fusion under physical constraints, thereby significantly improving noise resistance and establishing a new benchmark for health prediction in high concrete dams.
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
Open AccessA Multipoint Spatiotemporal Prediction Model for Concrete Dams Integrating Hybrid Clustering and Adaptive Decomposition‐Optimization Mechanisms
The displacement evolution of concrete dams serves as a key indicator of their structural safety. Establishing an accurate and reliable model for predicting displacement is essential for effective dam monitoring. Nevertheless, current multi‐point forecasting approaches often overlook the interdependencies among deformation drivers and lack robust validation techniques to assess generalization capability and stability. This shortcoming hinders the accurate representation of deformation behavior under complex loading scenarios. To overcome these issues, this research introduces a spatiotemporal prediction model for concrete dams that combines hybrid clustering with adaptive decomposition and optimization strategies. Initially, the SOM‐K‐means method is employed to clusters monitoring points, followed by spatial correlation analysis to uncover interpoint relationships. Clustering performance is quantitatively evaluated using a composite assessment technique. During model development, hydrostatic pressures are derived through finite element simulation, and sensitivity analysis is applied to gauge the influence of environmental variables on deformation. Furthermore, the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Mean Impact Value (MIV) techniques are employed to decompose and select deformation features. Tests show that the proposed model achieves superior predictive accuracy within clustered zones ( R 2 > 0.98, compared to Transformer: 0.9673 and CNN‐BiLSTM: 0.9501). Validation across multiple dam types further confirms the framework’s broad applicability and resilience. By incorporating spatiotemporal analysis, this method enables regionalized health monitoring and integrates data fusion under physical constraints, thereby significantly improving noise resistance and establishing a new benchmark for health prediction in high concrete dams.
- Open Access
- 12 August 2024
- Published by Springer Nature in Research Square
Mixed Monitoring Model of Concrete Arch Dam on Residual Sequence Correction
Under the dual influence of internal factors and the external environment, dam deformation shows a high degree of nonlinear characteristics. In the traditional dam deformation prediction model, an abnormal value of the residual sequence reflects an abnormal situation or potential fault in the dam deformation prediction. Therefore, it is particularly important to fully mine the effective information in the residual sequence. Considering the nonlinear, time-varying and chaotic characteristics of dam time series, a hybrid monitoring model of concrete arch dams based on residual sequence correction is proposed in this paper. Firstly, combined with the finite element method, the statistical model was used to establish the initial mixed prediction model based on the monitoring data. In view of the specific characteristics and periodicity of the prediction residuals of the hybrid model, this paper uses symplectic geometric mode decomposition (SGMD) to decompose the residual sequence. Then, the convolutional neural network (CNN) is optimized by the improved sparrow search algorithm (ISSA), and the decomposed modal components are predicted and reconstructed by the bidirectional gated recurrent unit (BiGRU) of the attention mechanism. Subsequently, the differential autoregressive moving average model (ARIMA) is used to correct the reconstructed residual sequence. Finally, the modified residual sequence is combined with the initial hybrid model to construct a hybrid monitoring model of a concrete arch dam based on residual sequence correction. Through the refinement of the residuals, the accuracy and reliability of the monitoring data are further improved. This provides a new and effective method for safety monitoring and early warning of concrete arch dams.
- 12 August 2024
- Published by Springer Nature in Research Square
Open AccessMixed Monitoring Model of Concrete Arch Dam on Residual Sequence Correction
Under the dual influence of internal factors and the external environment, dam deformation shows a high degree of nonlinear characteristics. In the traditional dam deformation prediction model, an abnormal value of the residual sequence reflects an abnormal situation or potential fault in the dam deformation prediction. Therefore, it is particularly important to fully mine the effective information in the residual sequence. Considering the nonlinear, time-varying and chaotic characteristics of dam time series, a hybrid monitoring model of concrete arch dams based on residual sequence correction is proposed in this paper. Firstly, combined with the finite element method, the statistical model was used to establish the initial mixed prediction model based on the monitoring data. In view of the specific characteristics and periodicity of the prediction residuals of the hybrid model, this paper uses symplectic geometric mode decomposition (SGMD) to decompose the residual sequence. Then, the convolutional neural network (CNN) is optimized by the improved sparrow search algorithm (ISSA), and the decomposed modal components are predicted and reconstructed by the bidirectional gated recurrent unit (BiGRU) of the attention mechanism. Subsequently, the differential autoregressive moving average model (ARIMA) is used to correct the reconstructed residual sequence. Finally, the modified residual sequence is combined with the initial hybrid model to construct a hybrid monitoring model of a concrete arch dam based on residual sequence correction. Through the refinement of the residuals, the accuracy and reliability of the monitoring data are further improved. This provides a new and effective method for safety monitoring and early warning of concrete arch dams.
- Open Access
Dam Deformation Prediction Model Based on Multi-Scale Adaptive Kernel Ensemble
Aiming at the noise and nonlinear characteristics existing in the deformation monitoring data of concrete dams, this paper proposes a dam deformation prediction model based on a multi-scale adaptive kernel ensemble. The model incorporates Gaussian white noise as a random factor and uses the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) method to decompose the data set finely. Each modal component is evaluated by sample entropy (SE) analysis so that the data set can be reconstructed according to the sample entropy value to retain key information. In addition, the model uses partial autocorrelation function (PACF) to determine the correlation between intrinsic modal function (IMF) and historical data. Then, the global search whale optimization algorithm (GSWOA) is used to accurately determine the parameters of kernel extreme learning machine (KELM), which forms the basis of the dam deformation prediction model based on multi-scale adaptive kernel function. The case analysis shows that CEEMDAN-SE-PACF can effectively extract signal features and identify significant components and trends so as to better understand the internal deformation trend of the dam. In terms of algorithm optimization, compared with the WOA algorithm and other algorithms, the results of the GSWOA algorithm are significantly better than other algorithms and have the optimal convergence. In terms of prediction performance, CEEMDAN-SE-PACF-GSWOA-KELM is superior to the CEEMDAN-WOA-KELM, GSWOA-KELM, CEEMDAN-KELM, and KELM models, showing higher accuracy and stronger stability. This improvement is manifested in the decrease of root mean square error (RMSE), mean square error (MSE), and mean absolute error (MAE) and the improvement of the R square (R2) value close to 1. These research results provide a new method for dam safety monitoring and evaluation.
Open AccessDam Deformation Prediction Model Based on Multi-Scale Adaptive Kernel Ensemble
Aiming at the noise and nonlinear characteristics existing in the deformation monitoring data of concrete dams, this paper proposes a dam deformation prediction model based on a multi-scale adaptive kernel ensemble. The model incorporates Gaussian white noise as a random factor and uses the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) method to decompose the data set finely. Each modal component is evaluated by sample entropy (SE) analysis so that the data set can be reconstructed according to the sample entropy value to retain key information. In addition, the model uses partial autocorrelation function (PACF) to determine the correlation between intrinsic modal function (IMF) and historical data. Then, the global search whale optimization algorithm (GSWOA) is used to accurately determine the parameters of kernel extreme learning machine (KELM), which forms the basis of the dam deformation prediction model based on multi-scale adaptive kernel function. The case analysis shows that CEEMDAN-SE-PACF can effectively extract signal features and identify significant components and trends so as to better understand the internal deformation trend of the dam. In terms of algorithm optimization, compared with the WOA algorithm and other algorithms, the results of the GSWOA algorithm are significantly better than other algorithms and have the optimal convergence. In terms of prediction performance, CEEMDAN-SE-PACF-GSWOA-KELM is superior to the CEEMDAN-WOA-KELM, GSWOA-KELM, CEEMDAN-KELM, and KELM models, showing higher accuracy and stronger stability. This improvement is manifested in the decrease of root mean square error (RMSE), mean square error (MSE), and mean absolute error (MAE) and the improvement of the R square (R2) value close to 1. These research results provide a new method for dam safety monitoring and evaluation.
- Open Access
- 1 January 2024
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2024 (1)
Innovative Approach to Dam Deformation Analysis: Integration of VMD, Fractal Theory, and WOA‐DELM
This paper introduces a novel and comprehensive model for the analysis of dam deformation trends, integrating the variational mode decomposition (VMD) method, fractal theory, and the whale optimization algorithm (WOA) to refine the deep extreme learning machine (DELM) model. This integration allows for a meticulous denoising process through VMD, effectively isolating pertinent signal characteristics from noise and measurement interference. Following this, fractal theory is utilized to conduct an in‐depth qualitative analysis of the denoised data, capturing intricate patterns within the deformation trends. The model further evolves with the application of WOA to optimize the DELM model, thereby facilitating an integrated approach that merges qualitative insights with quantitative analysis. The efficacy of this advanced model is demonstrated through a case study, highlighting its capability to deliver accurate and reliable predictions that are in harmony with practical engineering scenarios. This research not only offers a robust framework for analyzing dam deformation trends but also sets a new standard in the field, providing a new solution for assessing structural integrity in hydrological engineering.
- 1 January 2024
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2024 (1)
Open AccessInnovative Approach to Dam Deformation Analysis: Integration of VMD, Fractal Theory, and WOA‐DELM
This paper introduces a novel and comprehensive model for the analysis of dam deformation trends, integrating the variational mode decomposition (VMD) method, fractal theory, and the whale optimization algorithm (WOA) to refine the deep extreme learning machine (DELM) model. This integration allows for a meticulous denoising process through VMD, effectively isolating pertinent signal characteristics from noise and measurement interference. Following this, fractal theory is utilized to conduct an in‐depth qualitative analysis of the denoised data, capturing intricate patterns within the deformation trends. The model further evolves with the application of WOA to optimize the DELM model, thereby facilitating an integrated approach that merges qualitative insights with quantitative analysis. The efficacy of this advanced model is demonstrated through a case study, highlighting its capability to deliver accurate and reliable predictions that are in harmony with practical engineering scenarios. This research not only offers a robust framework for analyzing dam deformation trends but also sets a new standard in the field, providing a new solution for assessing structural integrity in hydrological engineering.
- Open Access
Prediction of Dam Deformation Using SSA-LSTM Model Based on Empirical Mode Decomposition Method and Wavelet Threshold Noise Reduction
The deformation monitoring information of concrete dams contains some high-frequency components, and the high-frequency components are strongly nonlinear, which reduces the accuracy of dam deformation prediction. In order to solve such problems, this paper proposes a concrete dam deformation monitoring model based on empirical mode decomposition (EMD) combined with wavelet threshold noise reduction and sparrow search algorithm (SSA) optimization of long short-term memory network (LSTM). The model uses EMD combined with wavelet threshold to decompose and denoise the measured deformation data. On this basis, the LSTM model based on SSA optimization is used to mine the nonlinear function relationship between the reconstructed monitoring data and various influencing factors. The engineering example is analyzed and compared with the prediction results of LSTM model and PSO-SVM model. The results show that the mean absolute error (MAE) and root mean square error (RMSE) of the model are 0.05345 and 0.06358, with the complex correlation coefficient R2 of 0.9533 being closer to 1 and a better fit than the other two models. This can effectively mine the relationship in the measured deformation data, and reduce the influence of high-frequency components on the dam prediction accuracy.
Open AccessPrediction of Dam Deformation Using SSA-LSTM Model Based on Empirical Mode Decomposition Method and Wavelet Threshold Noise Reduction
The deformation monitoring information of concrete dams contains some high-frequency components, and the high-frequency components are strongly nonlinear, which reduces the accuracy of dam deformation prediction. In order to solve such problems, this paper proposes a concrete dam deformation monitoring model based on empirical mode decomposition (EMD) combined with wavelet threshold noise reduction and sparrow search algorithm (SSA) optimization of long short-term memory network (LSTM). The model uses EMD combined with wavelet threshold to decompose and denoise the measured deformation data. On this basis, the LSTM model based on SSA optimization is used to mine the nonlinear function relationship between the reconstructed monitoring data and various influencing factors. The engineering example is analyzed and compared with the prediction results of LSTM model and PSO-SVM model. The results show that the mean absolute error (MAE) and root mean square error (RMSE) of the model are 0.05345 and 0.06358, with the complex correlation coefficient R2 of 0.9533 being closer to 1 and a better fit than the other two models. This can effectively mine the relationship in the measured deformation data, and reduce the influence of high-frequency components on the dam prediction accuracy.