Masoud Kazeminia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Masoud Kazeminia has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Anita Ehterami
Department of Food Hygiene and Quality Control, Faculty of Veterinary Medicine University of Tehran Tehran Iran
2 shared publications - Hassan Gandomi
Department of Food Hygiene and Quality Control, Faculty of Veterinary Medicine University of Tehran Tehran Iran
2 shared publications - Negin Noori
Department of Food Hygiene and Quality Control, Faculty of Veterinary Medicine University of Tehran Tehran Iran
2 shared publications Razzagh Mahmoudi
Health Products Safety Research Center Qazvin University of Medical sciences Qazvin Iran
2 shared publicationsShaghayegh Mousavi
Faculty of Medical Sciences Qazvin University of Medical Sciences Qazvin Iran
2 shared publications- Ali Khanjari
Department of Food Hygiene, Faculty of Veterinary Medicine University of Tehran Tehran Iran
1 shared publication
Latest Publications
- Open Access
- 22 October 2026
- Published by Wiley in JSFA Reports
Molecular confirmation of Brucella spp. in traditional cheeses: A cross‐sectional study
Background and Objective: Brucella spp. are major zoonotic foodborne pathogens frequently associated with the consumption of unpasteurized dairy products, particularly traditional cheeses. Although previous studies, including molecular investigations, have examined Brucella contamination in Iranian dairy products, molecularly confirmed and methodologically comparative data from central Iran remain limited, particularly with respect to diagnostic specificity. This cross‐sectional study aimed to (i) estimate the proportion of cheese samples yielding culture‐positive isolates that were PCR‐positive using an omp2a ‐based assay in major types of traditional cheeses marketed in Qazvin province, Iran, using combined culture and molecular confirmation, (ii) evaluate the agreement and limitations of conventional culture relative to PCR‐based confirmation, and (iii) explore whether contamination patterns vary descriptively by season and cheese type. Methods: A total of 112 traditional cheese samples were systematically collected from retail outlets in Qazvin, Iran, using a geographically stratified sampling framework. Samples were initially screened using standard culture techniques. Culture‐positive isolates were subsequently subjected to PCR confirmation targeting the omp2a gene. Associations between contamination status, season, and cheese type were assessed descriptively using the Fisher–Freeman–Halton exact test, as the limited number of PCR‐positive samples precluded reliable logistic regression modeling. Results: Fourteen samples (12.5%) were culture‐positive, whereas only seven samples (6.25%) were confirmed as Brucella spp. by PCR, indicating possible limited sensitivity of culture‐based screening. White cheese accounted for the highest proportion of PCR‐confirmed samples. Although higher contamination frequencies were observed during autumn and winter, no statistically robust associations with season or cheese type were identified. A statistically significant association was observed between sampling location and PCR‐confirmed positivity ( p = 0.038); however, this finding should be interpreted with caution given the small number of confirmed positives ( n = 7) and unequal sample sizes across sites (Site A: 1/44, Site B: 2/28, Site C: 4/36, Site D: 0/4), and does not establish a causal relationship. Conclusion: These findings support the cautious integration of molecular tools as confirmatory components of food safety surveillance, alongside strengthened hygiene and pasteurization practices in traditional cheese production.
- 22 October 2026
- Published by Wiley in JSFA Reports
Open AccessMolecular confirmation of Brucella spp. in traditional cheeses: A cross‐sectional study
Background and Objective: Brucella spp. are major zoonotic foodborne pathogens frequently associated with the consumption of unpasteurized dairy products, particularly traditional cheeses. Although previous studies, including molecular investigations, have examined Brucella contamination in Iranian dairy products, molecularly confirmed and methodologically comparative data from central Iran remain limited, particularly with respect to diagnostic specificity. This cross‐sectional study aimed to (i) estimate the proportion of cheese samples yielding culture‐positive isolates that were PCR‐positive using an omp2a ‐based assay in major types of traditional cheeses marketed in Qazvin province, Iran, using combined culture and molecular confirmation, (ii) evaluate the agreement and limitations of conventional culture relative to PCR‐based confirmation, and (iii) explore whether contamination patterns vary descriptively by season and cheese type. Methods: A total of 112 traditional cheese samples were systematically collected from retail outlets in Qazvin, Iran, using a geographically stratified sampling framework. Samples were initially screened using standard culture techniques. Culture‐positive isolates were subsequently subjected to PCR confirmation targeting the omp2a gene. Associations between contamination status, season, and cheese type were assessed descriptively using the Fisher–Freeman–Halton exact test, as the limited number of PCR‐positive samples precluded reliable logistic regression modeling. Results: Fourteen samples (12.5%) were culture‐positive, whereas only seven samples (6.25%) were confirmed as Brucella spp. by PCR, indicating possible limited sensitivity of culture‐based screening. White cheese accounted for the highest proportion of PCR‐confirmed samples. Although higher contamination frequencies were observed during autumn and winter, no statistically robust associations with season or cheese type were identified. A statistically significant association was observed between sampling location and PCR‐confirmed positivity ( p = 0.038); however, this finding should be interpreted with caution given the small number of confirmed positives ( n = 7) and unequal sample sizes across sites (Site A: 1/44, Site B: 2/28, Site C: 4/36, Site D: 0/4), and does not establish a causal relationship. Conclusion: These findings support the cautious integration of molecular tools as confirmatory components of food safety surveillance, alongside strengthened hygiene and pasteurization practices in traditional cheese production.
- Open Access
- 4 September 2026
- Published by Wiley in Food Science & Nutrition
- Vol. 14 (9)
Optimization of Physicochemical Properties of Chitosan–Gum Arabic Nanoparticles Containing Ziziphora clinopodioides Lam. Extract Using Response Surface Methodology
Ziziphora clinopodioides Lam. extract, as a natural bioactive compound, possesses a wide range of health benefits; however, its inherent instability limits practical applications. To overcome this limitation, nanoparticle‐based delivery systems, particularly chitosan–gum arabic nanoparticles, were employed. The aim of this study was to evaluate the effects of varying concentrations of chitosan (3–9 mg/mL), Z. clinopodioides L. extract (3–9 mg/mL), and gum arabic (0.5–1.5 mg/mL), on the physicochemical characteristics of chitosan–gum arabic nanoparticles containing the extract, using a two‐step emulsion–ionic gelation approach. Key parameters, including particle size, zeta potential, and encapsulation efficiency, were assessed by examining both individual and interactive effects. The process was optimized using response surface methodology (RSM) with a Box–Behnken design. The FTIR and XRD analyses were conducted to characterize the nanoparticles. Nanoparticle sizes ranged from 13.90 to 1722.75 nm, while the zeta potentials ranged from 1.63 to 46.67 mV, and the encapsulation efficiencies ranged from 20.51% to 63.66%. Notably, increasing the extract concentration reduced the encapsulation efficiency, while increasing particle size and zeta potential. Higher chitosan concentrations increased nanoparticle zeta potential. In contrast, increasing gum arabic concentration enhanced the encapsulation efficiency. The results demonstrated significant interaction effects among the formulation parameters across all measured responses. Optimal concentrations of chitosan, extract, and gum arabic were determined to be 9, 4.90, and 1.5 mg/mL, respectively, yielding a particle size of 50 nm, a zeta potential of 5.86 mV, and an encapsulation efficiency of 60.63%. The FTIR and XRD analyses confirmed proper encapsulation of the extract. These findings highlight the critical effects of studied parameters on practical characteristics of chitosan–gum arabic nanoparticles loaded with Z. clinopodioides L. extract.
- 4 September 2026
- Published by Wiley in Food Science & Nutrition
- Vol. 14 (9)
Open AccessOptimization of Physicochemical Properties of Chitosan–Gum Arabic Nanoparticles Containing Ziziphora clinopodioides Lam. Extract Using Response Surface Methodology
Ziziphora clinopodioides Lam. extract, as a natural bioactive compound, possesses a wide range of health benefits; however, its inherent instability limits practical applications. To overcome this limitation, nanoparticle‐based delivery systems, particularly chitosan–gum arabic nanoparticles, were employed. The aim of this study was to evaluate the effects of varying concentrations of chitosan (3–9 mg/mL), Z. clinopodioides L. extract (3–9 mg/mL), and gum arabic (0.5–1.5 mg/mL), on the physicochemical characteristics of chitosan–gum arabic nanoparticles containing the extract, using a two‐step emulsion–ionic gelation approach. Key parameters, including particle size, zeta potential, and encapsulation efficiency, were assessed by examining both individual and interactive effects. The process was optimized using response surface methodology (RSM) with a Box–Behnken design. The FTIR and XRD analyses were conducted to characterize the nanoparticles. Nanoparticle sizes ranged from 13.90 to 1722.75 nm, while the zeta potentials ranged from 1.63 to 46.67 mV, and the encapsulation efficiencies ranged from 20.51% to 63.66%. Notably, increasing the extract concentration reduced the encapsulation efficiency, while increasing particle size and zeta potential. Higher chitosan concentrations increased nanoparticle zeta potential. In contrast, increasing gum arabic concentration enhanced the encapsulation efficiency. The results demonstrated significant interaction effects among the formulation parameters across all measured responses. Optimal concentrations of chitosan, extract, and gum arabic were determined to be 9, 4.90, and 1.5 mg/mL, respectively, yielding a particle size of 50 nm, a zeta potential of 5.86 mV, and an encapsulation efficiency of 60.63%. The FTIR and XRD analyses confirmed proper encapsulation of the extract. These findings highlight the critical effects of studied parameters on practical characteristics of chitosan–gum arabic nanoparticles loaded with Z. clinopodioides L. extract.
- Open Access
- 1 January 2026
- Published by Wiley in Journal of Food Biochemistry
- Vol. 2026 (1)
Formulation and Optimization of Chitosan Nanocarriers Loaded With Ziziphora clinopodioides Lam. Essential Oil Using Response Surface Methodology: Improvement of Physical, Antioxidant, and Antibacterial Properties
This study aimed to optimize the functional and structural performance of Ziziphora clinopodioides essential oil (ZcEO)–loaded chitosan (CS) nanocarriers by evaluating the individual and interactive effects of different concentrations of CS, ZcEO, and TPP on antioxidant and antibacterial capacities, as well as Z ‐average and PDI, through response surface methodology. The Z ‐average values ranged from 116.17 to 4489 nm, and PDI values varied between 0.16 and 1.91. Increasing ZcEO concentration significantly reduced both Z ‐average and PDI values. CS at lower concentrations led to aggregation and the formation of larger, heterogeneous particles. Higher concentrations of TPP resulted in larger nanoparticles with higher PDI values, whereas optimal TPP levels enhanced structural integrity and increased antioxidant activity from 9.94% to 27.22%. Balanced concentrations of CS, TPP, and ZcEO improved antimicrobial efficacy, as evidenced by increased inhibition rates against Salmonella Typhimurium (from 87.01% to 92.23%) and Listeria monocytogenes (from 67.17% to 90.52%). The optimized formulation consisted of 4 mg/mL CS, 7.4 mg/mL ZcEO, and 4 mg/mL TPP, which produced nanoparticles of 30 nm with a PDI of 0.40, antioxidant activity of 25.10%, and strong antimicrobial efficacy. Furthermore, SEM confirmed a uniform spherical morphology and the successful entrapment of ZcEO within the polymeric matrix. These findings demonstrate a scalable and efficient methodology for nanoencapsulating EOs, establishing CS–TPP nanoparticles as effective bioactive carriers with improved physicochemical and functional properties.
- 1 January 2026
- Published by Wiley in Journal of Food Biochemistry
- Vol. 2026 (1)
Open AccessFormulation and Optimization of Chitosan Nanocarriers Loaded With Ziziphora clinopodioides Lam. Essential Oil Using Response Surface Methodology: Improvement of Physical, Antioxidant, and Antibacterial Properties
This study aimed to optimize the functional and structural performance of Ziziphora clinopodioides essential oil (ZcEO)–loaded chitosan (CS) nanocarriers by evaluating the individual and interactive effects of different concentrations of CS, ZcEO, and TPP on antioxidant and antibacterial capacities, as well as Z ‐average and PDI, through response surface methodology. The Z ‐average values ranged from 116.17 to 4489 nm, and PDI values varied between 0.16 and 1.91. Increasing ZcEO concentration significantly reduced both Z ‐average and PDI values. CS at lower concentrations led to aggregation and the formation of larger, heterogeneous particles. Higher concentrations of TPP resulted in larger nanoparticles with higher PDI values, whereas optimal TPP levels enhanced structural integrity and increased antioxidant activity from 9.94% to 27.22%. Balanced concentrations of CS, TPP, and ZcEO improved antimicrobial efficacy, as evidenced by increased inhibition rates against Salmonella Typhimurium (from 87.01% to 92.23%) and Listeria monocytogenes (from 67.17% to 90.52%). The optimized formulation consisted of 4 mg/mL CS, 7.4 mg/mL ZcEO, and 4 mg/mL TPP, which produced nanoparticles of 30 nm with a PDI of 0.40, antioxidant activity of 25.10%, and strong antimicrobial efficacy. Furthermore, SEM confirmed a uniform spherical morphology and the successful entrapment of ZcEO within the polymeric matrix. These findings demonstrate a scalable and efficient methodology for nanoencapsulating EOs, establishing CS–TPP nanoparticles as effective bioactive carriers with improved physicochemical and functional properties.
- Open Access
- 3 August 2023
- Published by Slovak University of Agriculture in Nitra in Journal of microbiology, biotechnology and food sciences
- Vol. 13 (3) , e10078
RAW COW MILK QUALITY: PHYSICOCHEMICAL, MICROBIOLOGICAL, AND SEASONAL VARIATION
Milk serves as a vital source of essential nutrients in human diets and must be safe for consumption. In the dairy industry, it is crucial to analyze the physicochemical and microbiological properties of raw cow milk (RCM) throughout the year to gather fundamental information, as milk quality significantly influences the final quality of dairy products. This study aimed to investigate the physicochemical and microbiological properties of 60 RCM samples collected from 15 primary milk collection centers in Qazvin, Iran, and assess the impact of seasonal variation on these properties. The study discovered that the RCM samples contained >7 Log10 cfu/mL of Staphylococcus aureus, total coliform count, aerobic mesophilic plate count, and mold and yeast in 15%, 30%, 37%, and 28% of the samples, respectively. The results indicated that aerobic mesophilic plate count, mold and yeast, total coliform count, and Staphylococcus aureus were higher in warmer seasons compared to colder seasons. Furthermore, the study revealed that the average pH, freezing point, solid-not-fat, and protein content were higher in warm seasons, while the average acidity, lactose, and fat content were higher in cold seasons. The physicochemical and microbiological properties of RCM in the Qazvin region were found to be below the acceptable quality value. Although seasonal variation throughout the year affected the microbial and physicochemical quality of RCM, the differences were not statistically significant (p>0.05), except for the solid-not-fat value in winter (p<0.05).
- 3 August 2023
- Published by Slovak University of Agriculture in Nitra in Journal of microbiology, biotechnology and food sciences
- Vol. 13 (3) , e10078
Open AccessRAW COW MILK QUALITY: PHYSICOCHEMICAL, MICROBIOLOGICAL, AND SEASONAL VARIATION
Milk serves as a vital source of essential nutrients in human diets and must be safe for consumption. In the dairy industry, it is crucial to analyze the physicochemical and microbiological properties of raw cow milk (RCM) throughout the year to gather fundamental information, as milk quality significantly influences the final quality of dairy products. This study aimed to investigate the physicochemical and microbiological properties of 60 RCM samples collected from 15 primary milk collection centers in Qazvin, Iran, and assess the impact of seasonal variation on these properties. The study discovered that the RCM samples contained >7 Log10 cfu/mL of Staphylococcus aureus, total coliform count, aerobic mesophilic plate count, and mold and yeast in 15%, 30%, 37%, and 28% of the samples, respectively. The results indicated that aerobic mesophilic plate count, mold and yeast, total coliform count, and Staphylococcus aureus were higher in warmer seasons compared to colder seasons. Furthermore, the study revealed that the average pH, freezing point, solid-not-fat, and protein content were higher in warm seasons, while the average acidity, lactose, and fat content were higher in cold seasons. The physicochemical and microbiological properties of RCM in the Qazvin region were found to be below the acceptable quality value. Although seasonal variation throughout the year affected the microbial and physicochemical quality of RCM, the differences were not statistically significant (p>0.05), except for the solid-not-fat value in winter (p<0.05).