Josipa Skočibušić Pejić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Josipa Skočibušić Pejić has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Alma-Dina Bašić
Department of Materials, Faculty of Civil Engineering, University of Zagreb, Andrije Kačića Miošića 26, 10000 Zagreb, Croatia
1 shared publication - Joško Barbarić
Faculty of Chemical Engineering and Technology, Department of Mechanical and Thermal Process Engineering, University of Zagreb, Zagreb, Croatia
1 shared publication Krunoslav Žižek
Fakultet kemijskog inženjerstva i tehnologije, Zavod za mehaničko i toplinsko procesno inženjerstvo
1 shared publication- Marijana Serdar
Department of Materials, Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia
1 shared publication - Martina Grubor
Department of Mechatronics and Robotics, University of Zadar, Mihovila Pavlinovića 1, 23 000 Zadar, Croatia
1 shared publication
Latest Publications
- Open Access
Link between the Reactivity of Slag and the Strength Development of Calcium Aluminate Cement
The problem of loss of strength caused by the conversion reaction with calcium aluminate cements (CAC) is well known. It has been shown that the addition of ground granulated blast furnace slag (GGBS) to CAC inhibits the conversion process. Different slags can have a different chemical and mineralogical composition depending on their origin and production process, which can significantly influence their reactivity. This work investigated the extent to which the R3 test, developed for Portland cement and based on isothermal calorimetry and/or bound water, was used to predict the reactivity of ground granulated blast furnace slag in a CAC. Mortars and cement pastes with a 30% replacement of slag were tested to evaluate their compressive strength and microstructure. The results show that slags with higher reactivity due to their hydraulic properties lead to a lower compressive strength loss within the first 6 h, a higher strength loss after 24 h due to stratlingite formation and a lower strength loss after 28 days due to pozzolanic reaction and stratlingite formation. The results also confirm that the R3 test was used as a rapid method to predict the effects of slag on the compressive strength of CAC.
Open AccessLink between the Reactivity of Slag and the Strength Development of Calcium Aluminate Cement
The problem of loss of strength caused by the conversion reaction with calcium aluminate cements (CAC) is well known. It has been shown that the addition of ground granulated blast furnace slag (GGBS) to CAC inhibits the conversion process. Different slags can have a different chemical and mineralogical composition depending on their origin and production process, which can significantly influence their reactivity. This work investigated the extent to which the R3 test, developed for Portland cement and based on isothermal calorimetry and/or bound water, was used to predict the reactivity of ground granulated blast furnace slag in a CAC. Mortars and cement pastes with a 30% replacement of slag were tested to evaluate their compressive strength and microstructure. The results show that slags with higher reactivity due to their hydraulic properties lead to a lower compressive strength loss within the first 6 h, a higher strength loss after 24 h due to stratlingite formation and a lower strength loss after 28 days due to pozzolanic reaction and stratlingite formation. The results also confirm that the R3 test was used as a rapid method to predict the effects of slag on the compressive strength of CAC.
- Open Access
- 1 January 2020
- Published by Croatian Society of Chemical Engineers/HDKI in Kemija u industriji
- Vol. 69 (13) , P11-P20
Release Rate Enhancement of Lurasidone Hydrochloride from Orally Disintegrating Tablets using Lyophilisation
- 1 January 2020
- Published by Croatian Society of Chemical Engineers/HDKI in Kemija u industriji
- Vol. 69 (13) , P11-P20
Open AccessRelease Rate Enhancement of Lurasidone Hydrochloride from Orally Disintegrating Tablets using Lyophilisation