YHYuhua Hang

Yuhua Hang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuhua Hang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Laser-Induced Audible Metal Defect Detection Method Based on Spectral Discriminative Weights

    by Bin Zhu, Tao Liu, Wuyue Hou, Sirui Wang, Yuhua Hang, Lei Shao, Zhen Cai, Jinna Mei, Xueqin Chen

    This paper proposes a metal defect detection method based on laser-induced audible sound testing (LAST). Defective and defect-free martensitic stainless-steel cubes were used as study samples, and the spectral characteristics of the acoustic signals generated under laser irradiation were comparatively analyzed. Based on F-ratio analysis, weighting curves characterizing the discrimination capability of each frequency band were calculated. Subsequently, nonlinear filter banks were designed according to the spectrum discrimination weights, tailored to the degree of spectrum discrimination. Finally, a globally weighted cepstral coefficient (GWCC) extraction algorithm for laser-induced acoustic signals was developed to determine whether defects are present in metals. Experimental results show that the recognition rate of defective samples based on GWCC features reached 94%, higher than that of traditional acoustic features, effectively enhancing feature discriminability. The results of this study demonstrate that applying LAST to metal defect detection is feasible. This method leverages laser-generated acoustic signals from a more comprehensive and economical perspective, pioneering a new solution for non-destructive testing of metal defects.

  • Open Access

    Residual Skewness Monitoring-Based Estimation Method for Laser-Induced Breakdown Spectroscopy

    by Bin Zhu, Xiangcheng Shen, Tao Liu, Sirui Wang, Yuhua Hang, Jianhua Mo, Lei Shao, Ruizhi Wang

    To address the challenges of narrow peak characteristics and low signal-to-noise ratio (SNR) detection in Laser-Induced Breakdown Spectroscopy (LIBS), in this paper, we combine the Sparse Bayesian Learning–Baseline Correction (SBL-BC) algorithm with residual skewness monitoring to propose a spectral estimation method tailored for LIBS. In LIBS spectra, discrete peaks are susceptible to baseline fluctuations and noise, while the Gaussian dictionary modeling and fixed convergence criterion of the existing SBL-BC lead to the inaccurate characterization of narrow peaks and high computational complexity. To overcome these limitations, we introduce a residual skewness dynamic tracking mechanism to mitigate residual negative skewness accumulation caused by positivity constraints under high noise levels, preventing traditional convergence criterion failure. Simultaneously, by eliminating the dictionary matrix and directly modeling the spectral peak vector, we transform matrix operations into vector computations, better aligning with LIBS’s narrow peak features and high-channel-count processing requirements. Through simulated and real spectral experiments, the results demonstrate that this method outperforms the SBL-BC algorithm in terms of spectral peak fitting accuracy, computational speed, and convergence performance across various SNRs. It effectively separates spectral peaks, baseline, and noise, providing a reliable approach for both quantitative and qualitative analysis of LIBS spectra.

  • Combined enhancement of fiber-optic laser-induced breakdown spectroscopy coupling spatial confinement and double-pulse irradiation

    by Yan Qiu, Jinghui Li, Bowen Lu, Jian Wu, Xinyu Guo, Yuhua Hang, Yongdong Li, Xingwen Li

    The mechanism of double-pulse laser irradiation under spatial confinement remains unclear due to complex plasma plume dynamics and multiple shock wave interactions. In this study, coupling of spatial confinement and double-pulse irradiation was investigated using fast photography, laser shadowgraphy, and spectroscopy. The experimental results demonstrated unique dynamic processes of plasma plume and shock waves, confirming that the plasma plume was eventually reshaped into a jet-like structure, and the combined enhancement effect can be regulated through different parameters, including inter-pulse delay and plate spacing. The inter-pulse delay dictates the primary mechanism of the secondary pulse's interaction with the initial plasma and the target surface; as it increases, plasma front absorption decreases while target surface ablation intensifies. Plate spacing determines the delay from laser incidence to plasma plume compression; along with the inter-pulse delay, it influences whether the secondary pulse generates a second-generation shock wave that merges with the initial shock wave for compression or performs a secondary compression after the first. Compared to double-pulse irradiation alone, combined enhancement increased emission intensity of Fe, Ni, and C spectra by up to 4.1 times accompanied by the increase in plasma temperature. The R2 of calibration curves was increased, and the sensitivity for trace components Cr and C was improved with limits of detection reaching 255 and 659 ppm.


  • Open Access

    Material Classification and Aging Time Prediction of Structural Metals Using Laser-Induced Breakdown Spectroscopy Combined with Probabilistic Neural Network

    by Qian Wang, Guowen Li, Yuhua Hang, Silei Chen, Yan Qiu, Wanmeng Zhao

    In this paper, laser-induced breakdown spectroscopy (LIBS) combined with a probabilistic neural network (PNN) was applied to classify engineering structural metal samples (valve stem, welding material, and base metal). Additionally, utilizing data from the plasma emission spectrum generated by laser ablation of samples with different aging times, an aging time prediction model based on a firefly optimized probabilistic neural network (FA-PNN) was established, which can effectively evaluate the service performance of structural materials. The problem of insufficient features obtained by principal component analysis (PCA) for predicting the aging time of materials is addressed by the proposal of a time-frequency feature extraction method based on short-time Fourier transform (STFT). The classification accuracy (ACC) of time-frequency features and principal component features was compared under PNN. The results indicate that, in comparison to the PCA feature extraction approach, the time-frequency feature extraction method based on STFT demonstrates higher accuracy in predicting the time of aging materials. Then, the relationship between classification accuracy (ACC) and settings of PNN was discussed. The ACC of the PNN model for both the material classification test set and the aging time test set achieved 100% with Firefly (FA) optimization algorithms. This result was also compared with the ACC of ANN, KNN, PLS-DA, and SIMCA for the aging time test set (95%, 87.5%, 85%, and 62.5%, respectively). The experimental results demonstrated that the classification model using LIBS combined with FA-PNN could realize better classification accuracy.


  • Open Access

    Conductivity Characterization of Insulation and Its Effects on the Calculation of the Electric Field Distribution in HVDC Cables

    by Shili Liu, Wei Wei, Tao Liu, Zhaoyu Hui, Yuhua Hang, Huan Zheng, Changyou Suo, Zhonghua Li

    The calculation of an electric field distribution provides the basis for the structural design of the insulation, and an accurate characterization of conductivity as a function of temperature and electric field forms an important basis for the simulation of the electric field distribution in HVDC (high-voltage direct current) cables. However, the conductivity functions that describe the insulating materials used for HVDC cables in different studies are different, and very little has been reported regarding how to choose the most accurate function. In this work, the conductivity of insulating materials used for HVDC cables is characterized, and the effects of the conductivity characterization on the simulation of the electric field in HVDC cables are studied. First, eight common conductivity functions are compared qualitatively. Then, the conductivities of XLPE for different temperatures and electric fields are measured, and a data fitting technique is used to analyze the coincidence degree between different functions and the test results. Finally, the steady-state electric field distributions of HVDC cables for different temperature gradients are simulated in COMSOL Multiphysics. The results show that the sum of the square of the relative errors of the fitting when using the original functions is larger than that achieved when using the logarithmic form of the functions. The deviations in the electric field caused by taking the logarithm of different functions are smaller.