Ruiqi Zhang

Nonmetallic ionic liquids (ILs) exhibit unique advantages in catalyzing poly (ethylene terephthalate) (PET) glycolysis, but usually require longer reaction times. We found that exposure to UV radiation can accelerate the glycolysis reaction and significantly reduce the reaction time. In this work, we synthesized five nonmetallic dibasic ILs, and their glycolysis catalytic activity was investigated. 1,8-diazabicyclo [5,4,0] undec-7-ene imidazole ([HDBU]Im) exhibited better catalytic performance. Meanwhile, UV radiation is used as a reinforcement method to improve the PET glycolysis efficiency. Under optimal conditions (5 g PET, 20 g ethylene glycol (EG), 0.25 g [HDBU]Im, 10,000 µW·cm⁻² UV radiation reacted for 90 min at 185 °C), the PET conversion and BHET yield were 100% and 88.9%, respectively. Based on the UV-visible spectrum, it was found that UV radiation can activate the C=O in PET. Hence, the incorporation of UV radiation can considerably diminish the activation energy of the reaction, shortening the reaction time of PET degradation. Finally, a possible reaction mechanism of [HDBU]Im-catalyzed PET glycolysis under UV radiation was proposed.

Compared with conventional pyrolysis, steam-assisted pyrolysis of polyethylene terephthalate (PET) can effectively eliminate char and upgrade terephthalic acid (TPA). However, during steam-assisted pyrolysis of PET, the degree of cracking still varies greatly, and while some of the product is excessively cracked to gas, the other part is still insufficiently cracked. In addition, these two types of products seriously affect the yield and purity of TPA. To further enhance the TPA, an attempt was made to reduce these impurities simultaneously by synergistic catalysis among the different components of the metal–acid catalyst. Through a series of experiments, Pt@Hzsm-5 was screened as the optimal catalyst. In the catalytic steam-assisted pyrolysis of PET, the optimum reaction temperature decreased to 400 °C, the calculated yield of TPA increased to 98.23 wt%, and the purity increased to 92.2%. The Pt@Hzsm-5 could be recycled three times with no significant decrease in the obtained yield of TPA. The catalytic mechanism of the Pt@Hzsm-5 was investigated through the analysis of the products and isotope tracing experiments. The Pt catalyzed the hydrogen transfer reaction between the water molecules and PET molecules, which inhibited the excessive cracking of TPA by improving the hydrogen transfer efficiency, reduced the generation of gaseous products, and improved the calculated yield of TPA. In contrast, the Hzsm-5 catalyzed the reaction of monovinyl ester cracking to TPA, effectively reducing the impurities in the solid product, increasing the olefin yield, and improving the purity of TPA. This discovery not only clarifies the synergistic catalytic effect of the Pt@Hzsm-5 in the steam-assisted pyrolysis of the PET reaction but also lays the foundation for further screening of other inexpensive metal–acid catalysts. This is of great significance to realize the industrial application of TPA preparation by PET pyrolysis.