Qian Zhang
Qian Zhang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Buxing Shi
Hebei Key Laboratory of Strategic Critical Mineral Resources, Hebei GEO University, Shijiazhuang 050031, China
1 shared publication - Jun Du
Hebei Key Laboratory of Strategic Critical Mineral Resources, Hebei GEO University, Shijiazhuang 050031, China
1 shared publication - Kui Cai
Institute of Geological Survey, Hebei GEO University, Shijiazhuang 050031, China
1 shared publication - Pingze Ni
Key Laboratory of Coastal Salt Marsh Ecosystems and Resources, Ministry of Natural Resources, Nanjing 210007, China
1 shared publication - Qi Hu
Hebei Hydrological Engineering Geological Exploration Institute, Shijiazhuang 050021, China
1 shared publication - Wang Ma
Hebei Hydrological Engineering Geological Exploration Institute, Shijiazhuang 050021, China
1 shared publication
Latest Publications
- Open Access
Microtopography Governs Tidal Inundation Frequency in the Luanhe Estuarine Salt Marsh: A Decadal Assessment Integrating Sentinel Data and UAV Photogrammetry
Tidal inundation is a key factor determining the structure and function of estuarine salt marsh ecosystems. However, due to the influence of microtopography (small-scale topographic variations), the fine-scale spatial variations in tidal inundation have not been fully studied. To fill this research gap, this study focuses on the Luanhe Estuary—a region highly sensitive to topographic changes—and explores in depth the physical mechanisms regulating tidal inundation in this area. The study integrates long-term data from the Sentinel-1 Synthetic Aperture Radar (SAR) and Sentinel-2 Multispectral Instrument (MSI), spanning the period from 2016 to 2025, to construct a high-resolution time series dataset of Apparent Inundation Frequency (AIF). Subsequently, this dataset is correlated with a high-precision microtopographic Digital Elevation Model (DEM) obtained through Unmanned Aerial Vehicle (UAV) surveys. The analysis reveals a strong nonlinear relationship between AIF and topographic elevation, which is best described by an exponential decay model (R2 = 0.903). The results show that the average inundation probability in the study area has shown a fluctuating but overall upward trend, increasing from 16.74% in 2016 to 29.02% in 2025 (peaking at 31.39% in 2024). Quantitative modeling confirms that microtopography is the primary controlling factor for fine-scale variations in tidal inundation levels. The integrated research approach proposed in this study provides a reliable framework for coastal vulnerability assessment. Against the backdrop of increasingly severe impacts from climate change and human activities, the high-resolution quantitative data generated by this study provides scientific support for formulating disaster mitigation and geomorphological management strategies.
Open AccessMicrotopography Governs Tidal Inundation Frequency in the Luanhe Estuarine Salt Marsh: A Decadal Assessment Integrating Sentinel Data and UAV Photogrammetry
Tidal inundation is a key factor determining the structure and function of estuarine salt marsh ecosystems. However, due to the influence of microtopography (small-scale topographic variations), the fine-scale spatial variations in tidal inundation have not been fully studied. To fill this research gap, this study focuses on the Luanhe Estuary—a region highly sensitive to topographic changes—and explores in depth the physical mechanisms regulating tidal inundation in this area. The study integrates long-term data from the Sentinel-1 Synthetic Aperture Radar (SAR) and Sentinel-2 Multispectral Instrument (MSI), spanning the period from 2016 to 2025, to construct a high-resolution time series dataset of Apparent Inundation Frequency (AIF). Subsequently, this dataset is correlated with a high-precision microtopographic Digital Elevation Model (DEM) obtained through Unmanned Aerial Vehicle (UAV) surveys. The analysis reveals a strong nonlinear relationship between AIF and topographic elevation, which is best described by an exponential decay model (R2 = 0.903). The results show that the average inundation probability in the study area has shown a fluctuating but overall upward trend, increasing from 16.74% in 2016 to 29.02% in 2025 (peaking at 31.39% in 2024). Quantitative modeling confirms that microtopography is the primary controlling factor for fine-scale variations in tidal inundation levels. The integrated research approach proposed in this study provides a reliable framework for coastal vulnerability assessment. Against the backdrop of increasingly severe impacts from climate change and human activities, the high-resolution quantitative data generated by this study provides scientific support for formulating disaster mitigation and geomorphological management strategies.
- Open Access
Spatial Distribution and Migration Mechanisms of Toxic Elements in Farmland Soil at Nonferrous Metal Smelting Site
Nonferrous metal smelting is a potential emission source of trace elements. However, it is vital to identify the dominant factors in determining toxic element (TE) spatial distribution and migration behaviors. We hypothesize that soil clay is the key factor in agricultural land around nonferrous metal smelting areas. Hence, this study focused on Qingyuan Town, a typical nonferrous metal smelting base. From this site, 95 soil samples (0–20 cm) were collected from cultivated land around the nonferrous metal smelters. Eight soil samples were analyzed for TE speciation and clay minerals in hot spot and non-hot spot areas following the TE distribution. A geographical detector (Geodor) showed that the distributions of total and exchangeable TE were affected by multiple factors (clay, CaO, and Fe2O3). X-ray diffraction (XRD) showed that the clay was mainly comprised of an illite and smectite mixed layer (67.13%), illite (15.38%), chlorite (9.25%), and kaolinite (8.25%). Moreover, correlation analysis showed that the exchangeable As was positively correlated with illite (R2 = 0.76, at p < 0.01 level), kaolinite (R2 = 0.43, at p < 0.01 level), and chlorite (R2 = 0.59, at p < 0.01 level) in the hot spot, but negatively correlated with a mixed layer of illite and smectite (R2 = 0.83, at p < 0.01 level). In contrast, the cases of Cd, Cu, Pb, and Zn presented an opposite tread with As. The positive matrix factorization (PMF) results showed that the contribution rate of nonferrous metal smelting to soil As was 42.90% and those of Cd, Cu, Pb, and Zn were 84.90%, 56.40%, 59.90%, and 59.20%, respectively. These results can provide guidance for controlling the TE risk associated with agricultural land management.
Open AccessSpatial Distribution and Migration Mechanisms of Toxic Elements in Farmland Soil at Nonferrous Metal Smelting Site
Nonferrous metal smelting is a potential emission source of trace elements. However, it is vital to identify the dominant factors in determining toxic element (TE) spatial distribution and migration behaviors. We hypothesize that soil clay is the key factor in agricultural land around nonferrous metal smelting areas. Hence, this study focused on Qingyuan Town, a typical nonferrous metal smelting base. From this site, 95 soil samples (0–20 cm) were collected from cultivated land around the nonferrous metal smelters. Eight soil samples were analyzed for TE speciation and clay minerals in hot spot and non-hot spot areas following the TE distribution. A geographical detector (Geodor) showed that the distributions of total and exchangeable TE were affected by multiple factors (clay, CaO, and Fe2O3). X-ray diffraction (XRD) showed that the clay was mainly comprised of an illite and smectite mixed layer (67.13%), illite (15.38%), chlorite (9.25%), and kaolinite (8.25%). Moreover, correlation analysis showed that the exchangeable As was positively correlated with illite (R2 = 0.76, at p < 0.01 level), kaolinite (R2 = 0.43, at p < 0.01 level), and chlorite (R2 = 0.59, at p < 0.01 level) in the hot spot, but negatively correlated with a mixed layer of illite and smectite (R2 = 0.83, at p < 0.01 level). In contrast, the cases of Cd, Cu, Pb, and Zn presented an opposite tread with As. The positive matrix factorization (PMF) results showed that the contribution rate of nonferrous metal smelting to soil As was 42.90% and those of Cd, Cu, Pb, and Zn were 84.90%, 56.40%, 59.90%, and 59.20%, respectively. These results can provide guidance for controlling the TE risk associated with agricultural land management.