XYXiao Yang

Xiao Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiao Yang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evolution Mechanisms of Flow and Transient Temperature Fields in Wet Friction Pair with Bionic Hexagonal Micro-Texture

    by Donghui Chen, Yulin Xiao, Shiqi Hao, Chong Ning, Xiaotong Ma, Bingyang Wang, Xiao Yang

    Friction pairs in wet clutches operate under complex conditions, which can cause surface damage and reduce overall clutch reliability. Surface texturing is an established technique for improving the tribological performance of such mechanical interfaces. Inspired by the wet adhesion properties of tree frog foot pads, a bionic regular hexagonal micro-texture was designed on the mating steel plate. A three-dimensional transient computational fluid dynamics (CFD) numerical methodology was developed and rigorously verified via pin-on-disc friction experiments. Subsequently, this verified numerical framework was extrapolated to establish disc-on-disc CFD models. The results demonstrated that the bionic hexagonal micro-texture altered flow field characteristics, increasing the local maximum flow velocity by 7.9% compared to untextured surfaces. Furthermore, the micro-textured grooves expanded the effective area for convective heat transfer and facilitated local fluid exchange, reducing the maximum average bulk temperature by 20.5% and the maximum radial temperature by 20.7%. Adjusting the structural parameters of these micro-textures further regulated the interfacial flow and temperature fields; notably, deeper grooves induced vortices at land region edges, accelerating flow velocity and decreasing the overall radial temperature gradient. This study provides a theoretical reference for enhancing the thermo-hydrodynamic performance of wet clutch friction pairs.


  • Open Access

    Data-Driven Multi-Objective Optimization Design of Micro-Textured Wet Friction Pair

    by Yulin Xiao, Donghui Chen, Shiqi Hao, Chong Ning, Xiaotong Ma, Bingyang Wang, Xiao Yang

    Friction pairs in heavy-duty power-shift tractor wet clutches operate under complex conditions, making them vulnerable to damage and reducing reliability. Optimizing their tribological performance requires a trade-off between a high coefficient of friction (COF) for torque transmission and a low temperature rise (∆T) to prevent thermal damage. Surface texturing is an effective method for improving the tribological performance of friction pairs. This study simulated the friction of wet clutch pairs via pin-on-disk tests and designed micro-textures on the pin surface to enhance tribological performance. Based on the experimental data, a Gaussian Process Regression (GPR) surrogate model was developed to accurately predict COF and ∆T as a function of the clutch’s operating and micro-texture’s geometric parameters. A Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was then employed to obtain the optimal set of solutions. The obtained pareto front clearly revealed the COF–temperature rise trade-off. From the optimal solution set, optimal micro-texture parameters for two typical operating conditions of different clutches were extracted. Compared with the untextured surface, the optimal solutions increased COF by 2.6%/1.2% and reduced ∆T by 39.2%/12.1%. Relative to neighboring experimental points, COF further increased by 11.3%/2.7% and ∆T decreased by 16.6%/1.7%. This work establishes a method for balancing the frictional and thermal performance of friction pairs.


  • Open Access

    Environmentally Friendly Sampling and Observation System for Exploration of Antarctic Subglacial Lakes

    by Zhipeng Deng, Youhong Sun, Xiaopeng Fan, Pavel Talalay, Bing Li, Ting Wang, Yazhou Li, Haibin Yu, Dongliang Wang, Jing Xu, et al.

    The sampling and observation of subglacial lakes play a vital role in studying the physical and chemical properties as well as the microbial characteristics of water within these Antarctic subglacial lakes. Compared to existing techniques, such as deep ice core drilling and clean hot water drilling, recoverable autonomous sondes, inspired by the spinning and reeling silk behavior of spiders, offer several advantages, including lightweight design, low power consumption, and minimal external pollution. Over the past six years, Jilin University, with support from the Ministry of Science and Technology of China, has developed an environmentally friendly sampling and observation system for Antarctic subglacial lakes, utilizing a recoverable autonomous sonde. The whole system includes a melting sonde, detection and control unit, scientific load platform, and ice surface auxiliaries. Extensive laboratory and joint system tests were conducted, both on key components and the complete system, including field tests in ice lakes. The results of these tests validated the feasibility of the underlying principles, the long-term reliability of the system operation, and the cleanliness of the drilling process. Ice penetration speed up to 2.14 m/h was reached with 6~6.5 kW melting tip power and a 660 mL lake water sample was collected. The relevant design concepts and technologies of the system are expected to play an important role in the clean detection and sampling of subglacial lakes in Antarctica, Greenland, and other regions.


  • Open Access

    Investigation and Analysis of Wettability, Anisotropy, and Adhesion in Bionic Upper and Lower Surfaces Inspired by Indocalamus Leaves

    by Bo Wang, Donghui Chen, Xiao Yang, Ming Li

    Nature provides us with a wealth of inspiration for the design of bionic functional surfaces. Numerous types of plant leaves with exceptional wettability, anisotropy, and adhesion are extensively employed in many engineering applications. Inspired by the wettability, anisotropy, and adhesion of indocalamus leaves, bionic upper and lower surfaces (BUSs and BLSs) of the indocalamus leaf were successfully prepared using a facile approach combining laser scanning and chemical modification. The results demonstrated the BUSs and BLSs obtained similar structural features to the upper and lower surfaces of the indocalamus leaf and exhibited enhanced and more-controllable wettability, anisotropy, and adhesion. More importantly, we conducted a detailed comparative analysis of the wettability, anisotropy, and adhesion between BUSs and BLSs. Finally, BUSs and BLSs were also explored for the corresponding potential applications, including self-cleaning, liquid manipulation, and fog collection, thereby broadening their practical utility. We believe that this study can contribute to the enrichment of the research on novel biological models and provide significant insights into the development of multifunctional bionic surfaces.


  • Open Access

    Evaluation of the Mechanical and Tribological Behavior of Polyether Ether Ketone Fiber-Reinforced Resin-Based Friction Materials Fabricated by Wet Granulation

    by Lekai Li, Zichao Ma, Guoqin Liu, Wei Song, Lili Ren, Shengwang Yuan, Xiao Yang, Qifeng Zhang, Yunhai Ma

    Resin-based friction materials (RBFMs) strengthened by polyether ether ketone (PEEK) fiber were designed and prepared in this study. Specimens incorporating PEEK fiber of 2–8 wt.% were fabricated based on wet granulation, and then the effects of the PEEK fiber content on the mechanical and tribological properties of RBFMs were systematically investigated. The results showed that PEEK fiber can sense the braking temperature and then effectively regulate the comprehensive properties of RBFMs. The specimen incorporating 6 wt.% PEEK fiber obtained the optimal comprehensive performance with a stable friction coefficient (COF), excellent fade resistance and recovery properties, and better wear resistance. The worn surface was inspected using a scanning electron microscope. After the friction–wear test, the specimen with 6 wt.% PEEK fiber presented a number of primary and secondary plateaus and a reduced number of pits with wear debris on the worn surface. The study indicated that PEEK fiber could not only enhance the mechanical and tribological properties of RBFMs at low temperatures because of their high strength and self-lubrication but also adhere to wear debris to reduce abrasive wear at high temperatures; furthermore, the adhered wear debris could form a secondary plateau under normal pressure, which could alleviate abrasion.


  • Open Access

    Improving Recognition Accuracy of Pesticides in Groundwater by Applying TrAdaBoost Transfer Learning Method

    by Donghui Chen, Bingyang Wang, Xiao Yang, Xiaohui Weng, Zhiyong Chang

    Accurate and rapid prediction of pesticides in groundwater is important to protect human health. Thus, an electronic nose was used to recognize pesticides in groundwater. However, the e-nose response signals for pesticides are different in groundwater samples from various regions, so a prediction model built on one region’s samples might be ineffective when tested in another. Moreover, the establishment of a new prediction model requires a large number of sample data, which will cost too much resources and time. To resolve this issue, this study introduced the TrAdaBoost transfer learning method to recognize the pesticide in groundwater using the e-nose. The main work was divided into two steps: (1) qualitatively checking the pesticide type and (2) semi-quantitatively predicting the pesticide concentration. The support vector machine integrated with the TrAdaBoost was adopted to complete these two steps, and the recognition rate can be 19.3% and 22.2% higher than that of methods without transfer learning. These results demonstrated the potential of the TrAdaBoost based on support vector machine approaches in recognizing the pesticide in groundwater when there were few samples in the target domain.