Min Wang
Research Subjects
Min Wang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Min Tian
Exploration and Development Research Institute, Shengli Oifield Company, SINOPEC, Dongying 257015, China
2 shared publications Bin Geng
Institute of Exploration and Development, Shengli Oilfield, SINOPEC, Dongying, China
1 shared publication- Fujing Sun
State Key Laboratory of Deep Oil and Gas, China University of Petroleum (East China), Qingdao 266580, China
1 shared publication Geng Bin
1 shared publicationHan Lianbin
1 shared publication- Jianmeng Sun
School of Geosciences, China University of Petroleum (East China), Qingdao 266580, China
1 shared publication
Latest Publications
- 1 January 2026
- Published by Editorial Office of Earth Science in Earth Science-Journal of China University of Geosciences
准噶尔盆地哈山地区风城组不同岩相储层含油饱和度表征
《地球科学》(ISSN 1000-2383;CN42-1874/P) (原刊名《地球科学——中国地质大学学报》ISSN 1000-2383;CN42-1233/P),创刊于1957年,是由教育部主管、中国地质大学主办的综合性地学学术理论期刊,月刊,2015年改名为《地球科学》,她以反映中国地质大学教学与科研最新的、高水平的基础地质、应用地质、资源与环境地质及地学工程技术研究成果为主要任务。
- 1 January 2026
- Published by Editorial Office of Earth Science in Earth Science-Journal of China University of Geosciences
准噶尔盆地哈山地区风城组不同岩相储层含油饱和度表征
《地球科学》(ISSN 1000-2383;CN42-1874/P) (原刊名《地球科学——中国地质大学学报》ISSN 1000-2383;CN42-1233/P),创刊于1957年,是由教育部主管、中国地质大学主办的综合性地学学术理论期刊,月刊,2015年改名为《地球科学》,她以反映中国地质大学教学与科研最新的、高水平的基础地质、应用地质、资源与环境地质及地学工程技术研究成果为主要任务。
- Open Access
- 13 August 2025
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1610926
Pore structure characterization of low-permeability sandstone by dual LNMR T2 cutoff values: a case study of the fourth member of shahejie formation, dongying sag, jiyang depression
Low-permeability sandstone reservoirs usually exhibit complex pore structure characteristics that significantly controls the type of fluid in the pore space and its occurrence and seepage mechanisms. In this work, the mercury injection capillary pressure (MICP) and low-field nuclear magnetic resonance (LNMR) analyses were conducted on low-permeability sandstone samples collected from the fourth member of the Eocene Shahejie Formation (Es4) of Dongying sag to characterize the pore structure, analyze the relationship between dual LNMR T2 cutoff values and the pore fluid type, and discuss the role of dual LNMR T2 cutoff values on the pore structure characterization. The results (1) indicated that the pore structure of low-permeability sandstones in the study area exhibits strong heterogeneity and can be divided into three types based on the MICP and LNMR results. Typically, sandstone samples with a type I pore structure usually exhibits characteristics such as low displacement pressure (Pd), large average pore throat radius, and a wide distribution of pore size. (2) shown that the dual LNMR T2 cutoff values can better characterize the occurrence of fluids in sandstone samples in the study area. When T2 >T2C2, fluid in the pore space is fully moveable; conversely, when T2T2C1, pores demonstrate fractal characteristics, enabling the representation of pore structure heterogeneity through fractal dimensions. Specifically, samples with Type I pore structures tend to show the smallest D2 and D3 values. In generally, by applying dual T2 cutoffs (T2C1 and T2C2) to LNMR-derived fractal dimensions, the pore structure of low-permeability sandstones can be better characterized, facilitating more accurate reservoir effectiveness assessments for oil and gas exploration.
- 13 August 2025
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1610926
Open AccessPore structure characterization of low-permeability sandstone by dual LNMR T2 cutoff values: a case study of the fourth member of shahejie formation, dongying sag, jiyang depression
Low-permeability sandstone reservoirs usually exhibit complex pore structure characteristics that significantly controls the type of fluid in the pore space and its occurrence and seepage mechanisms. In this work, the mercury injection capillary pressure (MICP) and low-field nuclear magnetic resonance (LNMR) analyses were conducted on low-permeability sandstone samples collected from the fourth member of the Eocene Shahejie Formation (Es4) of Dongying sag to characterize the pore structure, analyze the relationship between dual LNMR T2 cutoff values and the pore fluid type, and discuss the role of dual LNMR T2 cutoff values on the pore structure characterization. The results (1) indicated that the pore structure of low-permeability sandstones in the study area exhibits strong heterogeneity and can be divided into three types based on the MICP and LNMR results. Typically, sandstone samples with a type I pore structure usually exhibits characteristics such as low displacement pressure (Pd), large average pore throat radius, and a wide distribution of pore size. (2) shown that the dual LNMR T2 cutoff values can better characterize the occurrence of fluids in sandstone samples in the study area. When T2 >T2C2, fluid in the pore space is fully moveable; conversely, when T2T2C1, pores demonstrate fractal characteristics, enabling the representation of pore structure heterogeneity through fractal dimensions. Specifically, samples with Type I pore structures tend to show the smallest D2 and D3 values. In generally, by applying dual T2 cutoffs (T2C1 and T2C2) to LNMR-derived fractal dimensions, the pore structure of low-permeability sandstones can be better characterized, facilitating more accurate reservoir effectiveness assessments for oil and gas exploration.
- Open Access
Comparison of Methods for Determining the Oil Content in Medium-Mature Shale—A Case Study from the Fourth Member of the Shahejie Formation in the Dongying Depression
The oil content of shale oil reservoirs is a key parameter for reserve evaluation and “sweet spot” selection. However, discrepancies in the oil contents obtained by different methods have led to considerable disparities in the selection of exploration well locations and development strategies for shale oil. This study focuses on low to moderately mature sealed coring samples from the Dongying Depression in the Bohai Bay Basin. Three methods—NMR, Dean–Stark, and Rock-Eval—were employed to measure the oil content of shale. The results indicate that the oil content obtained by NMR is the highest, followed by the Dean–Stark distillation extraction method, while the pyrolysis method yields the lowest value. The study found that (1) the efficiency of the solvent extraction effect on moderately to low-mature shale is low since the occurrence of numerous closed pores leads to a lower yield when using the Dean–Stark method. (2) The exposure of shale samples to the air, sample crushing, and lag time for temperature increase cause a significant loss of light hydrocarbon components, resulting in the lowest oil content when measured by the Rock-Eval method. The NMR method, with its advantages of a short analysis time and non-destructive nature, appears to be the most advantageous method for shale oil content evaluation.
Open AccessComparison of Methods for Determining the Oil Content in Medium-Mature Shale—A Case Study from the Fourth Member of the Shahejie Formation in the Dongying Depression
The oil content of shale oil reservoirs is a key parameter for reserve evaluation and “sweet spot” selection. However, discrepancies in the oil contents obtained by different methods have led to considerable disparities in the selection of exploration well locations and development strategies for shale oil. This study focuses on low to moderately mature sealed coring samples from the Dongying Depression in the Bohai Bay Basin. Three methods—NMR, Dean–Stark, and Rock-Eval—were employed to measure the oil content of shale. The results indicate that the oil content obtained by NMR is the highest, followed by the Dean–Stark distillation extraction method, while the pyrolysis method yields the lowest value. The study found that (1) the efficiency of the solvent extraction effect on moderately to low-mature shale is low since the occurrence of numerous closed pores leads to a lower yield when using the Dean–Stark method. (2) The exposure of shale samples to the air, sample crushing, and lag time for temperature increase cause a significant loss of light hydrocarbon components, resulting in the lowest oil content when measured by the Rock-Eval method. The NMR method, with its advantages of a short analysis time and non-destructive nature, appears to be the most advantageous method for shale oil content evaluation.
- Open Access
Analysis and Application of Fluid Components in High-Clay Matrix Shale Oil: A Case Study of Gulong Shale Oil
Fluid components in cores are crucial parameters in evaluating the quality of a shale reservoir in both laboratory analyses and log interpretation. In the Gulong area, shale reservoirs are characterized by a high clay content, with clay spaces hosting both oil and water phases, complicating the occurrence mechanism of fluid components, as a result, traditional research methods are no longer applicable. As an advanced technique, nuclear magnetic resonance (NMR) has been applied in oilfields to determine the specific petrophysical properties of rocks. To more accurately identify the types of fluid components, this study carried out a new, well-designed 2D NMR experiment, rock pyrolysis experiment, and quantitative oil and water detection experiment (QOWDE) to study the Gulong shale. This study measured the 2D NMR map of the original state, saturation state, centrifugal state, and pyrolysis at different temperatures, and conducted mutual verification between the QOWDE and 2D NMR pyrolysis experiments to obtain the distribution of different components of Gulong shale on the 2D NMR map. Based on the experimental results, this study developed a component identification template suitable for the Gulong area and calculated the 2D NMR porosity and saturation from it. This lays a foundation for the analysis and application of fluid components in the Gulong region and provides a new experimental basis and methodological support for porosity and saturation calculations.
Open AccessAnalysis and Application of Fluid Components in High-Clay Matrix Shale Oil: A Case Study of Gulong Shale Oil
Fluid components in cores are crucial parameters in evaluating the quality of a shale reservoir in both laboratory analyses and log interpretation. In the Gulong area, shale reservoirs are characterized by a high clay content, with clay spaces hosting both oil and water phases, complicating the occurrence mechanism of fluid components, as a result, traditional research methods are no longer applicable. As an advanced technique, nuclear magnetic resonance (NMR) has been applied in oilfields to determine the specific petrophysical properties of rocks. To more accurately identify the types of fluid components, this study carried out a new, well-designed 2D NMR experiment, rock pyrolysis experiment, and quantitative oil and water detection experiment (QOWDE) to study the Gulong shale. This study measured the 2D NMR map of the original state, saturation state, centrifugal state, and pyrolysis at different temperatures, and conducted mutual verification between the QOWDE and 2D NMR pyrolysis experiments to obtain the distribution of different components of Gulong shale on the 2D NMR map. Based on the experimental results, this study developed a component identification template suitable for the Gulong area and calculated the 2D NMR porosity and saturation from it. This lays a foundation for the analysis and application of fluid components in the Gulong region and provides a new experimental basis and methodological support for porosity and saturation calculations.
- Open Access
Identification of Shale Lithofacies from FMI Images and ECS Logs Using Machine Learning with GLCM Features
The identification of sedimentary structures in lithofacies is of great significance to the exploration and development of Paleogene shale in the Boxing Sag. However, due to the scale mismatch between the thickness of laminae and the vertical resolution of conventional wireline logs, the conventional lithofacies division method fails to realize the accurate classification of sedimentary structures and cannot meet the needs of reservoir research. Therefore, it is necessary to establish a lithofacies identification method with higher precision from advanced logs. In this paper, a method integrating the gray level co-occurrence matrix (GLCM) and random forest (RF) algorithms is proposed to classify shale lithofacies with different sedimentary structures based on formation micro-imager (FMI) imaging logging and elemental capture spectroscopy (ECS) logging. According to the characteristics of shale laminae on FMI images, GLCM, an image texture extraction tool, is utilized to obtain texture features reflecting sedimentary structures from FMI images. It is proven that GLCM can depict shale sedimentary structures efficiently and accurately, and four texture features (contrast, entropy, energy, and homogeneity) are sensitive to shale sedimentary structures. To accommodate the correlation between the four texture features, the random forest algorithm, which has been proven not to be affected by correlated input features, is selected for supervised lithofacies classification. To enhance the model’s ability to differentiate between argillaceous limestone and calcareous mudstone, the carbonate content and clay content calculated from the ECS logs are involved in the input features. Moreover, grid search cross-validation (CV) is implemented to optimize the hyperparameters of the model. The optimized model achieves favorable performance on training data, validation data, and test data, with average accuracies of 0.84, 0.79, and 0.76, respectively. This study also discusses the application of the classification model in lithofacies and production prediction.
Open AccessIdentification of Shale Lithofacies from FMI Images and ECS Logs Using Machine Learning with GLCM Features
The identification of sedimentary structures in lithofacies is of great significance to the exploration and development of Paleogene shale in the Boxing Sag. However, due to the scale mismatch between the thickness of laminae and the vertical resolution of conventional wireline logs, the conventional lithofacies division method fails to realize the accurate classification of sedimentary structures and cannot meet the needs of reservoir research. Therefore, it is necessary to establish a lithofacies identification method with higher precision from advanced logs. In this paper, a method integrating the gray level co-occurrence matrix (GLCM) and random forest (RF) algorithms is proposed to classify shale lithofacies with different sedimentary structures based on formation micro-imager (FMI) imaging logging and elemental capture spectroscopy (ECS) logging. According to the characteristics of shale laminae on FMI images, GLCM, an image texture extraction tool, is utilized to obtain texture features reflecting sedimentary structures from FMI images. It is proven that GLCM can depict shale sedimentary structures efficiently and accurately, and four texture features (contrast, entropy, energy, and homogeneity) are sensitive to shale sedimentary structures. To accommodate the correlation between the four texture features, the random forest algorithm, which has been proven not to be affected by correlated input features, is selected for supervised lithofacies classification. To enhance the model’s ability to differentiate between argillaceous limestone and calcareous mudstone, the carbonate content and clay content calculated from the ECS logs are involved in the input features. Moreover, grid search cross-validation (CV) is implemented to optimize the hyperparameters of the model. The optimized model achieves favorable performance on training data, validation data, and test data, with average accuracies of 0.84, 0.79, and 0.76, respectively. This study also discusses the application of the classification model in lithofacies and production prediction.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Oil saturation quantitative evaluation in lacustrine shale: A novel insight from NMR T1-T2 experiments
Oil saturation is important for shale reservior to identify favorable sections and mapping the geological sweet spot. Current oil saturation evaluation methods, including experiments and empirical formulas, are not suitable for shale reservoir because of the complex mineral, fluid components and pore structure characteristics. To establish the shale oil saturation calculation model, X-ray diffraction, one-dimension and two-dimension nuclear magnetic resonance (NMR), and oil-water two-phase displacement experiments were employed on shale samples collected in the upper sub-member of the fourth member of the Eocene Shahejie Formation in the Dongying sag, Jiyang Depression, Bohai Bay Basin. After data analysis, the reason for whether oil is produced in the displacement experiments were explained, distribution characteristics of different shale components in the NMR T1-T2 map were analyzed, and a new shale oil saturation calculation method was proposed using NMR T2 sensitive parameters that reflected the changes of NMR T2 spectrum morphological characteristics with different oil saturation calibrated by NMR T1-T2 map at different displacement stage. The results indicated that the pore structure of shale samples is complex and show strong heterogeneity according to the NMR T2 spectrum, and the distribution of shale pore size is the main factor determining whether there is oil in the volumetric cylinder in the displacement experiment under the premise of the slight difference of wettability. NMR T1-T2 map is an effective way to identify different components (kerogen and solid bitumen, adsorbed oil, free oil, structural and adsorbed water, free water) of shale samples, and usually, kerogen and solid bitumen distributed in the top left of the T1-T2 map with T1>10 ms, T2<0.1 ms. Based on this, T2 threshold for free oil and adsorbed oil are 2 and 0.2 ms, and the corresponding threshold of pore radius are 40 and 4 nm according to the NMR theory. As NMR T2 spectrum sensitive parameters, geometric mean and interval porosity corresponding to the first peak are positively and negatively correlated with oil saturation respectively. With understanding this, oil saturation calculation method is established using the above two parameters and the Root Mean Square Error (RESM) between the measure oil saturation and the calculated results is 5.78%, which reflecting the accuracy and validity of the method. In general, this method allows the shale oil saturation to be accurately calculated and provides a parameter basis for the determination of favorable sections and evaluation of resource of shale oil reservoir. Moreover, it also offers a new idea for the oil saturation predication by NMR logging.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessOil saturation quantitative evaluation in lacustrine shale: A novel insight from NMR T1-T2 experiments
Oil saturation is important for shale reservior to identify favorable sections and mapping the geological sweet spot. Current oil saturation evaluation methods, including experiments and empirical formulas, are not suitable for shale reservoir because of the complex mineral, fluid components and pore structure characteristics. To establish the shale oil saturation calculation model, X-ray diffraction, one-dimension and two-dimension nuclear magnetic resonance (NMR), and oil-water two-phase displacement experiments were employed on shale samples collected in the upper sub-member of the fourth member of the Eocene Shahejie Formation in the Dongying sag, Jiyang Depression, Bohai Bay Basin. After data analysis, the reason for whether oil is produced in the displacement experiments were explained, distribution characteristics of different shale components in the NMR T1-T2 map were analyzed, and a new shale oil saturation calculation method was proposed using NMR T2 sensitive parameters that reflected the changes of NMR T2 spectrum morphological characteristics with different oil saturation calibrated by NMR T1-T2 map at different displacement stage. The results indicated that the pore structure of shale samples is complex and show strong heterogeneity according to the NMR T2 spectrum, and the distribution of shale pore size is the main factor determining whether there is oil in the volumetric cylinder in the displacement experiment under the premise of the slight difference of wettability. NMR T1-T2 map is an effective way to identify different components (kerogen and solid bitumen, adsorbed oil, free oil, structural and adsorbed water, free water) of shale samples, and usually, kerogen and solid bitumen distributed in the top left of the T1-T2 map with T1>10 ms, T2<0.1 ms. Based on this, T2 threshold for free oil and adsorbed oil are 2 and 0.2 ms, and the corresponding threshold of pore radius are 40 and 4 nm according to the NMR theory. As NMR T2 spectrum sensitive parameters, geometric mean and interval porosity corresponding to the first peak are positively and negatively correlated with oil saturation respectively. With understanding this, oil saturation calculation method is established using the above two parameters and the Root Mean Square Error (RESM) between the measure oil saturation and the calculated results is 5.78%, which reflecting the accuracy and validity of the method. In general, this method allows the shale oil saturation to be accurately calculated and provides a parameter basis for the determination of favorable sections and evaluation of resource of shale oil reservoir. Moreover, it also offers a new idea for the oil saturation predication by NMR logging.