Yuan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuan Wang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hanhui Jiang
Faculty of Sports Science, Ningbo University, Ningbo 315211, China
4 shared publications - Yaodong Gu
Ningbo University
4 shared publications - Justin Fernandez
Auckland Bioengineering Institute, University of Auckland, Auckland, New Zealand
2 shared publications - Liu Xu
Faculty of Sports Science, Ningbo University, Ningbo 315211, China
2 shared publications - Qichang Mei
Faculty of Sports Science, Ningbo University
2 shared publications - Xiao-Yi Yang
Faculty of Sports Science, Ningbo University, Ningbo, China
2 shared publications
Latest Publications
- 1 March 2025
- Published by MyJove Corporation
- No. 216,p. e67152
JoVE Video Dataset
Step width is a critical factor influencing lower limb biomechanics during running, significantly affecting stability, performance, and injury risk. Understanding these effects is essential for optimizing running performance and minimizing injury risk. This study evaluated the effects of varying step widths on lower limb biomechanics at different running speeds. Thirteen healthy Chinese males (aged 20-24) participated in the study, running at speeds of 3.0 m/s and 3.7 m/s using six distinct step widths: the preferred step width and five variations (reductions of 13% and 6.5%, and increases of 6.5%, 13%, and 25%, based on leg length). Data were collected using a motion capture system and force plates and analyzed through repeated measures ANOVA and correlation tests. The results indicated that wider step widths significantly reduced peak knee abduction moments and hip adduction angles, whereas narrower step widths increased knee joint loading. These findings have important implications for clinicians and runners, suggesting that careful step width selection can help reduce injury risk and enhance running efficiency. This study contributes a new dataset that lays the foundation for future research into the relationship between step width and running biomechanics and serves as a reference for training and rehabilitation practices.
- 1 March 2025
- Published by MyJove Corporation
- No. 216,p. e67152
JoVE Video Dataset
Step width is a critical factor influencing lower limb biomechanics during running, significantly affecting stability, performance, and injury risk. Understanding these effects is essential for optimizing running performance and minimizing injury risk. This study evaluated the effects of varying step widths on lower limb biomechanics at different running speeds. Thirteen healthy Chinese males (aged 20-24) participated in the study, running at speeds of 3.0 m/s and 3.7 m/s using six distinct step widths: the preferred step width and five variations (reductions of 13% and 6.5%, and increases of 6.5%, 13%, and 25%, based on leg length). Data were collected using a motion capture system and force plates and analyzed through repeated measures ANOVA and correlation tests. The results indicated that wider step widths significantly reduced peak knee abduction moments and hip adduction angles, whereas narrower step widths increased knee joint loading. These findings have important implications for clinicians and runners, suggesting that careful step width selection can help reduce injury risk and enhance running efficiency. This study contributes a new dataset that lays the foundation for future research into the relationship between step width and running biomechanics and serves as a reference for training and rehabilitation practices.
- 28 February 2025
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 216,p. e67152
Influence of Step-Width Manipulation on Running Biomechanics
Step width is a critical factor influencing lower limb biomechanics during running, significantly affecting stability, performance, and injury risk. Understanding these effects is essential for optimizing running performance and minimizing injury risk. This study evaluated the effects of varying step widths on lower limb biomechanics at different running speeds. Thirteen healthy Chinese males (aged 20-24) participated in the study, running at speeds of 3.0 m/s and 3.7 m/s using six distinct step widths: the preferred step width and five variations (reductions of 13% and 6.5%, and increases of 6.5%, 13%, and 25%, based on leg length). Data were collected using a motion capture system and force plates and analyzed through repeated measures ANOVA and correlation tests. The results indicated that wider step widths significantly reduced peak knee abduction moments and hip adduction angles, whereas narrower step widths increased knee joint loading. These findings have important implications for clinicians and runners, suggesting that careful step width selection can help reduce injury risk and enhance running efficiency. This study contributes a new dataset that lays the foundation for future research into the relationship between step width and running biomechanics and serves as a reference for training and rehabilitation practices.
- 28 February 2025
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 216,p. e67152
Influence of Step-Width Manipulation on Running Biomechanics
Step width is a critical factor influencing lower limb biomechanics during running, significantly affecting stability, performance, and injury risk. Understanding these effects is essential for optimizing running performance and minimizing injury risk. This study evaluated the effects of varying step widths on lower limb biomechanics at different running speeds. Thirteen healthy Chinese males (aged 20-24) participated in the study, running at speeds of 3.0 m/s and 3.7 m/s using six distinct step widths: the preferred step width and five variations (reductions of 13% and 6.5%, and increases of 6.5%, 13%, and 25%, based on leg length). Data were collected using a motion capture system and force plates and analyzed through repeated measures ANOVA and correlation tests. The results indicated that wider step widths significantly reduced peak knee abduction moments and hip adduction angles, whereas narrower step widths increased knee joint loading. These findings have important implications for clinicians and runners, suggesting that careful step width selection can help reduce injury risk and enhance running efficiency. This study contributes a new dataset that lays the foundation for future research into the relationship between step width and running biomechanics and serves as a reference for training and rehabilitation practices.
- Open Access
- 8 September 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (9) , 1059
Finite Element Analysis of Head–Neck Kinematics in Rear-End Impact Conditions with Headrest
A detailed three-dimensional (3D) head–neck (C0–C7) finite element (FE) model was developed and used to dictate the motions of each cervical spinal segment under static physiological loadings of flexion and extension with a magnitude of 1.0 Nm and rear-end impacts. In this dynamic study, a rear-end impact pulse was applied to C7 to create accelerations of 4.5 G and 8.5 G. The predicted segmental motions and displacements of the head were in agreement with published results under physiological loads of 1.0 Nm. Under rear-end impact conditions, the effects of peak pulse acceleration and headrest angles on the kinematic responses of the head–neck complex showed rates of increase/decrease in the rotational motion of various cervical spinal segments that were different in the first 200 ms. The peak flexion rotation of all segments was lower than the combined ROM of flexion and extension. The peak extension rotation of all segments showed variation compared to the combined ROM of flexion and extension depending on G and the headrest angle. A higher acceleration of C7 increased the peak extension angle of lower levels, but the absolute increase was restricted by the distance between the head and the headrest. A change in the headrest angle from 45° to 30° resulted in a change in extension rotation at the lower C5–C6 segments to flexion rotation, which further justified the effectiveness of having distance between the head and the headrest. This study shows that the existing C0-C7 FE model is efficient at defining the gross reactions of the human cervical spine under both physiological static and simulated whiplash circumstances. The fast rate of changes in flexion and extension rotation of various segments may result in associated soft tissues and bony structures experiencing tolerances beyond their material characteristic limits. It is suggested that a proper location and angle of the headrest could effectively prevent the cervical spine from injury in traumatic vehicular accidents.
- 8 September 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (9) , 1059
Open AccessFinite Element Analysis of Head–Neck Kinematics in Rear-End Impact Conditions with Headrest
A detailed three-dimensional (3D) head–neck (C0–C7) finite element (FE) model was developed and used to dictate the motions of each cervical spinal segment under static physiological loadings of flexion and extension with a magnitude of 1.0 Nm and rear-end impacts. In this dynamic study, a rear-end impact pulse was applied to C7 to create accelerations of 4.5 G and 8.5 G. The predicted segmental motions and displacements of the head were in agreement with published results under physiological loads of 1.0 Nm. Under rear-end impact conditions, the effects of peak pulse acceleration and headrest angles on the kinematic responses of the head–neck complex showed rates of increase/decrease in the rotational motion of various cervical spinal segments that were different in the first 200 ms. The peak flexion rotation of all segments was lower than the combined ROM of flexion and extension. The peak extension rotation of all segments showed variation compared to the combined ROM of flexion and extension depending on G and the headrest angle. A higher acceleration of C7 increased the peak extension angle of lower levels, but the absolute increase was restricted by the distance between the head and the headrest. A change in the headrest angle from 45° to 30° resulted in a change in extension rotation at the lower C5–C6 segments to flexion rotation, which further justified the effectiveness of having distance between the head and the headrest. This study shows that the existing C0-C7 FE model is efficient at defining the gross reactions of the human cervical spine under both physiological static and simulated whiplash circumstances. The fast rate of changes in flexion and extension rotation of various segments may result in associated soft tissues and bony structures experiencing tolerances beyond their material characteristic limits. It is suggested that a proper location and angle of the headrest could effectively prevent the cervical spine from injury in traumatic vehicular accidents.
- Open Access
- 13 May 2023
- Published by MDPI AG in Healthcare
- Vol. 11 (10) , 1418
Understanding the Role of Children’s Footwear on Children’s Feet and Gait Development: A Systematic Scoping Review
Children’s footwear plays an important role in the healthy growth of foot and gait development during the growing stage. This review aims to synthesize findings of previous investigations and to explore the biomechanical influences of different types of children’s footwear on foot health and gait development, thus guiding the healthy and safe growth of children’s feet and gait. Online databases were searched for potential eligible articles, including Web of Science, Google Scholar, and PubMed. In total, nineteen articles were identified after searching based on the inclusion requirements. The following five aspects of biomechanical parameters were identified in the literature, including spatiotemporal, kinematics, kinetics, electromyography (EMG), and plantar pressure distribution. Children’s footwear can affect their foot health and gait performance. In addition, children’s shoes with different flexibility and sole hardness have different effects on children’s feet and gait development. Compared to barefoot, the stride length, step length, stride time, and step time were increased, but cadence was decreased with wearing shoes. Furthermore, the support base and toe-off time increased. Double support time and stance time increased, but single support time decreased. The hip, knee, and ankle joints showed increased range of motion in children with the rear-foot strike with larger ground reaction force as well. Future studies may need to evaluate the influence of footwear types on gait performance of children in different age groups. Findings in this study may provide recommendations for suitable footwear types for different ages, achieving the aim of growth and development in a healthy and safe manner.
- 13 May 2023
- Published by MDPI AG in Healthcare
- Vol. 11 (10) , 1418
Open AccessUnderstanding the Role of Children’s Footwear on Children’s Feet and Gait Development: A Systematic Scoping Review
Children’s footwear plays an important role in the healthy growth of foot and gait development during the growing stage. This review aims to synthesize findings of previous investigations and to explore the biomechanical influences of different types of children’s footwear on foot health and gait development, thus guiding the healthy and safe growth of children’s feet and gait. Online databases were searched for potential eligible articles, including Web of Science, Google Scholar, and PubMed. In total, nineteen articles were identified after searching based on the inclusion requirements. The following five aspects of biomechanical parameters were identified in the literature, including spatiotemporal, kinematics, kinetics, electromyography (EMG), and plantar pressure distribution. Children’s footwear can affect their foot health and gait performance. In addition, children’s shoes with different flexibility and sole hardness have different effects on children’s feet and gait development. Compared to barefoot, the stride length, step length, stride time, and step time were increased, but cadence was decreased with wearing shoes. Furthermore, the support base and toe-off time increased. Double support time and stance time increased, but single support time decreased. The hip, knee, and ankle joints showed increased range of motion in children with the rear-foot strike with larger ground reaction force as well. Future studies may need to evaluate the influence of footwear types on gait performance of children in different age groups. Findings in this study may provide recommendations for suitable footwear types for different ages, achieving the aim of growth and development in a healthy and safe manner.