Mateusz Proniewicz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mateusz Proniewicz has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Karolina Petela
Department of Thermal Technology, Silesian University of Technology, 44-100 Gliwice, Poland
4 shared publications Andrzej SzlęK
2 shared publications- Andrzej Szlęk
Department of Thermal Technology, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 22, 44-100 Gliwice, Poland
2 shared publications - Andrea Gruber
SINTEF Energy Research
1 shared publication - Andrzej Szlęk
Department of Thermal Technology, Silesian University of Technology, 44-100 Gliwice, Poland
1 shared publication - Christine Mounaïm-Rousselle
Université d’Orléans
1 shared publication
Latest Publications
- Open Access
Preliminary Comparison of Ammonia- and Natural Gas-Fueled Micro-Gas Turbine Systems in Heat-Driven CHP for a Small Residential Community
This research considers a preliminary comparative technical evaluation of two micro-gas turbine (MGT) systems in combined heat and power (CHP) mode (100 kWe), aimed at supplying heat to a residential community of 15 average-sized buildings located in Central Europe over a year. Two systems were modelled in Ebsilon 15 software: a natural gas case (benchmark) and an ammonia-fueled case, both based on the same on-design parameters. Off-design simulations evaluated performance over variable ambient temperatures and loads. Idealized, unrecuperated cycles were adopted to isolate the thermodynamic impact of the fuel switch under complete combustion assumption. Under these assumptions, the study shows that the ammonia system produces more electrical energy and less excess heat, yielding marginally higher electrical efficiency and EUF (26.05% and 77.63%) than the natural gas system (24.59% and 77.55%), highlighting ammonia’s utilization potential in such a context. Future research should target validating ammonia combustion and emission profiles across the turbine load range, and updating the thermodynamic model with a recuperator and SCR accounting for realistic pressure losses.
Open AccessPreliminary Comparison of Ammonia- and Natural Gas-Fueled Micro-Gas Turbine Systems in Heat-Driven CHP for a Small Residential Community
This research considers a preliminary comparative technical evaluation of two micro-gas turbine (MGT) systems in combined heat and power (CHP) mode (100 kWe), aimed at supplying heat to a residential community of 15 average-sized buildings located in Central Europe over a year. Two systems were modelled in Ebsilon 15 software: a natural gas case (benchmark) and an ammonia-fueled case, both based on the same on-design parameters. Off-design simulations evaluated performance over variable ambient temperatures and loads. Idealized, unrecuperated cycles were adopted to isolate the thermodynamic impact of the fuel switch under complete combustion assumption. Under these assumptions, the study shows that the ammonia system produces more electrical energy and less excess heat, yielding marginally higher electrical efficiency and EUF (26.05% and 77.63%) than the natural gas system (24.59% and 77.55%), highlighting ammonia’s utilization potential in such a context. Future research should target validating ammonia combustion and emission profiles across the turbine load range, and updating the thermodynamic model with a recuperator and SCR accounting for realistic pressure losses.
- Open Access
Life cycle costing of an ammonia-fueled internal combustion engine-driven orchard vehicle
- Open Access
Life cycle assessment of ammonia as carbon-free fuel in internal combustion engine-driven orchard vehicle
- 22 January 2024
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 146 (3) , 1-25
Life Cycle Assessment of Selected Ammonia Production Technologies From the Perspective of Ammonia as a Fuel for Heavy-Duty Vehicle
One of the promising options for the decarbonization of industry dependent on heavy-duty vehicles is to use alternative fuels such as ammonia. The study investigates the environmental impact of five selected ammonia production technologies and compares them to diesel fuel: ammonia based on hydrogen from steam methane reforming (gray), ammonia based on steam methane reforming with carbon capture and storage (blue), ammonia based on hydrogen from electrolysis with electrical energy supplied by: PV (green PV), wind (green wind), and nuclear plant (pink). Environmental impact is assessed using the ReCiPE method based on three midpoint and two endpoint categories: climate change, fossil depletion, freshwater consumption, human health, and ecosystem quality. The climate change results per 1 MJ (LHV) are as follows: gray ammonia at 0.148 kg CO2 eq., blue ammonia at 0.0701 kg CO2 eq., green ammonia PV at 0.0197 kg CO2 eq., green ammonia wind at 0.01039 kg CO2 eq., pink ammonia at 0.00565 kg CO2 eq., and diesel (including its stoichiometric combustion) at 0.0851 kg CO2 eq. The life cycle assessment (LCA) was performed using the lca for experts (GaBi) software, with Sphera's comprehensive Managed LCA Content as the primary data source for the life cycle inventory. The study indicates nuclear and renewable-based routes to be the best options in terms of the climate change and human health categories; however, their high impact on freshwater consumption and ecosystem quality is revealed. Still, ammonia is proven to be an effective solution toward decarbonization, as compared to diesel, given its blue, green, or pink source.
- 22 January 2024
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 146 (3) , 1-25
Life Cycle Assessment of Selected Ammonia Production Technologies From the Perspective of Ammonia as a Fuel for Heavy-Duty Vehicle
One of the promising options for the decarbonization of industry dependent on heavy-duty vehicles is to use alternative fuels such as ammonia. The study investigates the environmental impact of five selected ammonia production technologies and compares them to diesel fuel: ammonia based on hydrogen from steam methane reforming (gray), ammonia based on steam methane reforming with carbon capture and storage (blue), ammonia based on hydrogen from electrolysis with electrical energy supplied by: PV (green PV), wind (green wind), and nuclear plant (pink). Environmental impact is assessed using the ReCiPE method based on three midpoint and two endpoint categories: climate change, fossil depletion, freshwater consumption, human health, and ecosystem quality. The climate change results per 1 MJ (LHV) are as follows: gray ammonia at 0.148 kg CO2 eq., blue ammonia at 0.0701 kg CO2 eq., green ammonia PV at 0.0197 kg CO2 eq., green ammonia wind at 0.01039 kg CO2 eq., pink ammonia at 0.00565 kg CO2 eq., and diesel (including its stoichiometric combustion) at 0.0851 kg CO2 eq. The life cycle assessment (LCA) was performed using the lca for experts (GaBi) software, with Sphera's comprehensive Managed LCA Content as the primary data source for the life cycle inventory. The study indicates nuclear and renewable-based routes to be the best options in terms of the climate change and human health categories; however, their high impact on freshwater consumption and ecosystem quality is revealed. Still, ammonia is proven to be an effective solution toward decarbonization, as compared to diesel, given its blue, green, or pink source.
- Open Access
- 14 August 2023
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-20
Energy and Exergy Assessments of a Diesel-, Biodiesel-, and Ammonia-Fueled Compression Ignition Engine
The research is aimed at investigating ammonia in a compression ignition internal combustion engine as a promising alternative fuel towards decarbonization. This study presents energy and exergy assessments of a low-power engine for three cases of fuel supply, diesel oil, biodiesel oil, and ammonia with pilot biodiesel oil, across the entire engine’s range. While diesel or biodiesel was administered directly into the engine cylinder, the ammonia was delivered through port injection. The results show that the maximum thermal efficiency of 33.56% and exergy efficiency of 31.88% were found at 1800 rpm and 71% load for the diesel fuel system. For the biodiesel fuel system, the efficiencies were 32.72% and 30.93%, respectively, at 1800 rpm and 100% load, and for the ammonia with pilot biodiesel system, they were at 31.98% and 30.04%, respectively, for the same rpm and load. The exergy assessment indicates that exergy destruction, which accounts for the irreversibility of processes such as combustion and friction, is responsible for the greatest loss of useful energy. Optimizing these processes could significantly improve the engine’s performance for all three fuel cases. This research found that ammonia could successfully substitute diesel or biodiesel fuel, as the engine’s efficiency was comparable in all three tested scenarios; however, further research and optimization in terms of the ammonia-fueled engine emissions are required.
- 14 August 2023
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-20
Open AccessEnergy and Exergy Assessments of a Diesel-, Biodiesel-, and Ammonia-Fueled Compression Ignition Engine
The research is aimed at investigating ammonia in a compression ignition internal combustion engine as a promising alternative fuel towards decarbonization. This study presents energy and exergy assessments of a low-power engine for three cases of fuel supply, diesel oil, biodiesel oil, and ammonia with pilot biodiesel oil, across the entire engine’s range. While diesel or biodiesel was administered directly into the engine cylinder, the ammonia was delivered through port injection. The results show that the maximum thermal efficiency of 33.56% and exergy efficiency of 31.88% were found at 1800 rpm and 71% load for the diesel fuel system. For the biodiesel fuel system, the efficiencies were 32.72% and 30.93%, respectively, at 1800 rpm and 100% load, and for the ammonia with pilot biodiesel system, they were at 31.98% and 30.04%, respectively, for the same rpm and load. The exergy assessment indicates that exergy destruction, which accounts for the irreversibility of processes such as combustion and friction, is responsible for the greatest loss of useful energy. Optimizing these processes could significantly improve the engine’s performance for all three fuel cases. This research found that ammonia could successfully substitute diesel or biodiesel fuel, as the engine’s efficiency was comparable in all three tested scenarios; however, further research and optimization in terms of the ammonia-fueled engine emissions are required.