Jiang Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiang Han has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Zewei Quan
Southern University of Science and Technology (SUSTech)
5 shared publications - Bin Xu
Department of Chemistry, Academy for Advanced Interdisciplinary Studies, Southern University of Science and Technology, China
3 shared publications Qian Li
School of Physics Science and Information Technology Shandong Key Laboratory of Optical Communication Science and Technology Liaocheng University Liaocheng Shandong 252059 China
3 shared publicationsPeijie Zhang
Department of Chemistry Southern University of Science and Technology (SUSTech) Shenzhen Guangdong 518055 China
2 shared publicationsPengfei Shen
College of Engineering Physics Shenzhen Technology University Shenzhen Guangdong 518118 China
2 shared publicationsYawen Li
Department of Chemistry Southern University of Science and Technology (SUSTech) Shenzhen Guangdong 518055 China
2 shared publications
Latest Publications
- Open Access
- 27 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Pressure-controlled free exciton and self-trapped exciton emission in quasi-one-dimensional hybrid lead bromides
Hybrid metal halides represent a novel type of semiconductor light emitters with intriguing excitonic emission properties, including free exciton emission and self-trapped exciton emission. Achieving precise control over these two excitonic emissions in hybrid metal halides is highly desired yet remains challenging. Here, the complete transformation from intrinsically broadband self-trapped exciton emission to distinctively sharp free exciton emission in a quasi-one-dimensional hybrid metal halide (C2H10N2)8[Pb4Br18]·6Br with a ribbon width of n = 4, is successfully achieved based on high-pressure method. During compression, pressure-induced phonon hardening continuously reduces exciton–phonon coupling, therefore suppressing excitonic localization and quenching the original self-trapped exciton emission. Notably, further compression triggers excitonic delocalization to induce intense free exciton emission, accompanied with reduced carrier effective masses and improved charge distribution. Controlled high-pressure investigations indicate that the ribbon width of n > 2 is necessary to realize excitonic delocalization and generate free exciton emissions in similar quasi-one-dimensional hybrid metal halides. This work presents an important photophysical process of excitonic transitions from self-trapped exciton emission to free exciton emission in quasi-one-dimensional hybrid metal halides without chemical regulation, promoting the rational synthesis of hybrid metal halides with desired excitonic emissions.
- 27 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessPressure-controlled free exciton and self-trapped exciton emission in quasi-one-dimensional hybrid lead bromides
Hybrid metal halides represent a novel type of semiconductor light emitters with intriguing excitonic emission properties, including free exciton emission and self-trapped exciton emission. Achieving precise control over these two excitonic emissions in hybrid metal halides is highly desired yet remains challenging. Here, the complete transformation from intrinsically broadband self-trapped exciton emission to distinctively sharp free exciton emission in a quasi-one-dimensional hybrid metal halide (C2H10N2)8[Pb4Br18]·6Br with a ribbon width of n = 4, is successfully achieved based on high-pressure method. During compression, pressure-induced phonon hardening continuously reduces exciton–phonon coupling, therefore suppressing excitonic localization and quenching the original self-trapped exciton emission. Notably, further compression triggers excitonic delocalization to induce intense free exciton emission, accompanied with reduced carrier effective masses and improved charge distribution. Controlled high-pressure investigations indicate that the ribbon width of n > 2 is necessary to realize excitonic delocalization and generate free exciton emissions in similar quasi-one-dimensional hybrid metal halides. This work presents an important photophysical process of excitonic transitions from self-trapped exciton emission to free exciton emission in quasi-one-dimensional hybrid metal halides without chemical regulation, promoting the rational synthesis of hybrid metal halides with desired excitonic emissions.
- Open Access
- 15 May 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (19)
Temperature and pressure-induced excitation-dependent emissions in zero-dimensional hybrid metal halides with mixed halogens
Zero-dimensional (0D) hybrid metal halides (HMHs) have emerged as a promising platform for exploring excitation-dependent multicolor luminescent materials owing to their diverse crystal structures and chemical compositions. Nevertheless, understanding the mechanism behind excitation-dependent emissions (EDEs) in 0D HMHs and achieving precise modulation remains challenging. In this work, the delicate regulations on the EDE of 0D (DMEDABr)4SnBr3I3 (DMEDA: N, N′-dimethylethylenediamine) with mixed halogens are achieved under low temperature and high pressure, respectively. The inhomogeneous halogen occupation at the atomic scale leads to the formation of Br-rich and I-rich SnX6 (X = Br, I) octahedra, which act as distinct luminescent centers upon photoexcitation. At low temperatures, the narrowed photoluminescence spectra could distinguish the individual emissions from different luminescent centers, resulting in a pronounced EDE of (DMEDABr)4SnBr3I3. In addition, the contraction and distortion of the luminescent SnX6 (X = Br, I) centers at high pressure further result in different degrees of emission shifts, giving rise to the gradual emergence and disappearance of EDE. This work elucidates the underlying mechanism of EDE in 0D HMHs and highlights the crucial role of halogens in determining the optical properties of metal halides.
- 15 May 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (19)
Open AccessTemperature and pressure-induced excitation-dependent emissions in zero-dimensional hybrid metal halides with mixed halogens
Zero-dimensional (0D) hybrid metal halides (HMHs) have emerged as a promising platform for exploring excitation-dependent multicolor luminescent materials owing to their diverse crystal structures and chemical compositions. Nevertheless, understanding the mechanism behind excitation-dependent emissions (EDEs) in 0D HMHs and achieving precise modulation remains challenging. In this work, the delicate regulations on the EDE of 0D (DMEDABr)4SnBr3I3 (DMEDA: N, N′-dimethylethylenediamine) with mixed halogens are achieved under low temperature and high pressure, respectively. The inhomogeneous halogen occupation at the atomic scale leads to the formation of Br-rich and I-rich SnX6 (X = Br, I) octahedra, which act as distinct luminescent centers upon photoexcitation. At low temperatures, the narrowed photoluminescence spectra could distinguish the individual emissions from different luminescent centers, resulting in a pronounced EDE of (DMEDABr)4SnBr3I3. In addition, the contraction and distortion of the luminescent SnX6 (X = Br, I) centers at high pressure further result in different degrees of emission shifts, giving rise to the gradual emergence and disappearance of EDE. This work elucidates the underlying mechanism of EDE in 0D HMHs and highlights the crucial role of halogens in determining the optical properties of metal halides.
- 29 November 2023
- Published by Wiley in Angewandte Chemie
- Vol. 136 (1)
Pressure‐Induced Free Exciton Emission in a Quasi‐Zero‐Dimensional Hybrid Lead Halide
Structural dimensionality and electronic dimensionality play a crucial role in determining the type of excitonic emission in hybrid metal halides (HMHs). It is important but challenging to achieve free exciton (FE) emission in zero‐dimensional (0D) HMHs based on the control over the electronic dimensionality. In this work, a quasi‐0D HMH (C7H15N2Br)2PbBr4 with localized electronic dimensionality is prepared as a prototype model. With increasing pressure onto (C7H15N2Br)2PbBr4, the broad and weak self‐trapped exciton (STE) emission at ambient conditions is considerably enhanced before 3.6 GPa, which originates from more distorted [PbBr4]2− seesaw units upon compression. Notably, a narrow FE emission in (C7H15N2Br)2PbBr4 appears at 3.6 GPa, and then this FE emission is gradually strengthened up to 8.4 GPa. High pressure structural characterizations reveal that anisotropic contraction of (C7H15N2Br)2PbBr4 results in a noticeable reduction in the distance between adjacent [PbBr4]2− seesaw units, as well as an obvious enhancement of crystal stiffness. Consequently, the electronic connectivity in (C7H15N2Br)2PbBr4 is sufficiently promoted above 3.6 GPa, which is also supported with theoretical calculations. The elevation of electronic connectivity and enhanced stiffness together lead to pressure‐induced FE emission and subsequent emission enhancement in quasi‐0D (C7H15N2Br)2PbBr4.
- 29 November 2023
- Published by Wiley in Angewandte Chemie
- Vol. 136 (1)
Pressure‐Induced Free Exciton Emission in a Quasi‐Zero‐Dimensional Hybrid Lead Halide
Structural dimensionality and electronic dimensionality play a crucial role in determining the type of excitonic emission in hybrid metal halides (HMHs). It is important but challenging to achieve free exciton (FE) emission in zero‐dimensional (0D) HMHs based on the control over the electronic dimensionality. In this work, a quasi‐0D HMH (C7H15N2Br)2PbBr4 with localized electronic dimensionality is prepared as a prototype model. With increasing pressure onto (C7H15N2Br)2PbBr4, the broad and weak self‐trapped exciton (STE) emission at ambient conditions is considerably enhanced before 3.6 GPa, which originates from more distorted [PbBr4]2− seesaw units upon compression. Notably, a narrow FE emission in (C7H15N2Br)2PbBr4 appears at 3.6 GPa, and then this FE emission is gradually strengthened up to 8.4 GPa. High pressure structural characterizations reveal that anisotropic contraction of (C7H15N2Br)2PbBr4 results in a noticeable reduction in the distance between adjacent [PbBr4]2− seesaw units, as well as an obvious enhancement of crystal stiffness. Consequently, the electronic connectivity in (C7H15N2Br)2PbBr4 is sufficiently promoted above 3.6 GPa, which is also supported with theoretical calculations. The elevation of electronic connectivity and enhanced stiffness together lead to pressure‐induced FE emission and subsequent emission enhancement in quasi‐0D (C7H15N2Br)2PbBr4.
- 29 November 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (1) , e202316348
Pressure‐Induced Free Exciton Emission in a Quasi‐Zero‐Dimensional Hybrid Lead Halide
Structural dimensionality and electronic dimensionality play a crucial role in determining the type of excitonic emission in hybrid metal halides (HMHs). It is important but challenging to achieve free exciton (FE) emission in zero‐dimensional (0D) HMHs based on the control over the electronic dimensionality. In this work, a quasi‐0D HMH (C7H15N2Br)2PbBr4 with localized electronic dimensionality is prepared as a prototype model. With increasing pressure onto (C7H15N2Br)2PbBr4, the broad and weak self‐trapped exciton (STE) emission at ambient conditions is considerably enhanced before 3.6 GPa, which originates from more distorted [PbBr4]2− seesaw units upon compression. Notably, a narrow FE emission in (C7H15N2Br)2PbBr4 appears at 3.6 GPa, and then this FE emission is gradually strengthened up to 8.4 GPa. High pressure structural characterizations reveal that anisotropic contraction of (C7H15N2Br)2PbBr4 results in a noticeable reduction in the distance between adjacent [PbBr4]2− seesaw units, as well as an obvious enhancement of crystal stiffness. Consequently, the electronic connectivity in (C7H15N2Br)2PbBr4 is sufficiently promoted above 3.6 GPa, which is also supported with theoretical calculations. The elevation of electronic connectivity and enhanced stiffness together lead to pressure‐induced FE emission and subsequent emission enhancement in quasi‐0D (C7H15N2Br)2PbBr4.
- 29 November 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (1) , e202316348
Pressure‐Induced Free Exciton Emission in a Quasi‐Zero‐Dimensional Hybrid Lead Halide
Structural dimensionality and electronic dimensionality play a crucial role in determining the type of excitonic emission in hybrid metal halides (HMHs). It is important but challenging to achieve free exciton (FE) emission in zero‐dimensional (0D) HMHs based on the control over the electronic dimensionality. In this work, a quasi‐0D HMH (C7H15N2Br)2PbBr4 with localized electronic dimensionality is prepared as a prototype model. With increasing pressure onto (C7H15N2Br)2PbBr4, the broad and weak self‐trapped exciton (STE) emission at ambient conditions is considerably enhanced before 3.6 GPa, which originates from more distorted [PbBr4]2− seesaw units upon compression. Notably, a narrow FE emission in (C7H15N2Br)2PbBr4 appears at 3.6 GPa, and then this FE emission is gradually strengthened up to 8.4 GPa. High pressure structural characterizations reveal that anisotropic contraction of (C7H15N2Br)2PbBr4 results in a noticeable reduction in the distance between adjacent [PbBr4]2− seesaw units, as well as an obvious enhancement of crystal stiffness. Consequently, the electronic connectivity in (C7H15N2Br)2PbBr4 is sufficiently promoted above 3.6 GPa, which is also supported with theoretical calculations. The elevation of electronic connectivity and enhanced stiffness together lead to pressure‐induced FE emission and subsequent emission enhancement in quasi‐0D (C7H15N2Br)2PbBr4.
- 24 June 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (31) , 10625-10633
Regulating multiple self-trapped exciton emissions in zero-dimensional antimony halides with pyramidal units
The [SbCl5]2− distortions modulate triplet STE emissions. The enhancement of high-energy triplet emission is ascribed to enhanced electron–phonon coupling, promoted intersystem crossing process, as well as restrained nonradiative transitions.
- 24 June 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (31) , 10625-10633
Regulating multiple self-trapped exciton emissions in zero-dimensional antimony halides with pyramidal units
The [SbCl5]2− distortions modulate triplet STE emissions. The enhancement of high-energy triplet emission is ascribed to enhanced electron–phonon coupling, promoted intersystem crossing process, as well as restrained nonradiative transitions.