Pınar Kızılkaya
Research Subjects
Pınar Kızılkaya has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Bilge Sayın
Department of Gastronomy and Culinary Arts, School of Tourism and Hotel Management, Ardahan University, Ardahan 75002, Türkiye
2 shared publications - Mükerrem Kaya
Department of Food Engineering, Faculty of Agriculture, Atatürk University, Erzurum TR-25240, Türkiye
2 shared publications - Akif Göktuğ Bozkurt
Hacettepe University
1 shared publication - Altug Kucukgul
Hatay Mustafa Kemal University, Faculty of Veterinary, Department of Biochemistry, 31040, Antakya, Turkey
1 shared publication - Duygu Alp Baltakesmez
Ardahan University
1 shared publication - Feyza Kırmacı
ARDAHAN UNIVERSITY, ARDAHAN TECHNICAL SCIENCES VOCATIONAL SCHOOL, CULINARY ARTS PR
1 shared publication
Latest Publications
- 8 December 2025
- Published by Association of Food Technology, Turkey in Gıda
- Vol. 50 (6) , 1220-1229
COMPARATIVE EVALUATION OF TRADITIONAL AND INDUSTRIAL KASHAR CHEESES BASED ON PHYSICOCHEMICAL, TEXTURAL, COLOR, AND SENSORY ATTRIBUTES
This study investigated and compared the physicochemical, color, textural, and sensory properties of Kashar cheeses produced by traditional and industrial methods. For this purpose, 24 samples were collected: four from each of the four local producers in Ardahan and two from the national-scale industrial producers. The pH values of the samples varied according to the production type, with the lowest levels observed in the traditional samples (5.67–5.98). The external L* values ranged from 75.26 to 84.70, being higher in industrial samples. Traditional cheeses showed stronger yellow tones, as reflected by their higher b* values. Regarding texture, the adhesiveness of the cheese samples ranged from 0.63 to 1.56 mJ (p < 0.05). Sensory evaluation indicated that the traditional sample TK2 received the highest scores across all attributes. The results indicate that traditional Kashar cheeses differ in certain quality attributes and may be suitable for geographical indication and quality-based labeling.
- 8 December 2025
- Published by Association of Food Technology, Turkey in Gıda
- Vol. 50 (6) , 1220-1229
COMPARATIVE EVALUATION OF TRADITIONAL AND INDUSTRIAL KASHAR CHEESES BASED ON PHYSICOCHEMICAL, TEXTURAL, COLOR, AND SENSORY ATTRIBUTES
This study investigated and compared the physicochemical, color, textural, and sensory properties of Kashar cheeses produced by traditional and industrial methods. For this purpose, 24 samples were collected: four from each of the four local producers in Ardahan and two from the national-scale industrial producers. The pH values of the samples varied according to the production type, with the lowest levels observed in the traditional samples (5.67–5.98). The external L* values ranged from 75.26 to 84.70, being higher in industrial samples. Traditional cheeses showed stronger yellow tones, as reflected by their higher b* values. Regarding texture, the adhesiveness of the cheese samples ranged from 0.63 to 1.56 mJ (p < 0.05). Sensory evaluation indicated that the traditional sample TK2 received the highest scores across all attributes. The results indicate that traditional Kashar cheeses differ in certain quality attributes and may be suitable for geographical indication and quality-based labeling.
- Open Access
- 13 February 2025
- Published by Central Research Institute of Food and Feed Control in Gıda ve Yem Bilimi Teknolojisi Dergisi
- No. 33,p. 40-50
Goose Meat: Salting/drying effect on nutritional value, physicochemical and sensory properties
Objective: In Kars and Ardahan, where climatic conditions are suitable for goose farming, the consumption of goose meat has been an integral part of local cuisine for generations. In conventional production, salting and drying play pivotal roles in enhancing flavor and preserving goose meat. This study aimed to identify the nutritional, physicochemical, and sensory properties of goose meat subjected to different salting and drying levels. Materials and methods: In this study, 16 naturally reared geese were collected from Hanak district of Ardahan province. Traditional cooking methods prevalent in the region, classical boiling and oven cooking, have been applied without the use of salt, spices, or food additives. Breast muscle samples were used for each treatment group. Subsequently, various analyses of physicochemical properties and nutritional parameters, including salt content, dry matter, pH, protein, fat, cooking loss, mineral content, and cholesterol level, were conducted for the raw and/or cooked samples. Sensory analysis was performed to assess the acceptability of the samples. Discussion and results: According to the results obtained, the most abundant minerals in the goose meat samples were determined as sodium (Na), potassium (K), phosphorus (P), magnesium (Mg), and iron (Fe), respectively. The amount of salt and drying time significantly affected cooking loss (P < 0.01). Additionally, it was found that different salting and drying levels significantly affected the overall consumer acceptability of goose meat (P < 0.01). Finally, it was concluded that the optimization of traditional salting and drying techniques not only enhances the flavor and shelf life of meat, but also plays a crucial role in meeting consumer demands for quality and nutritional value. Keywords: dry-cured; goose meat; nutrition; salting; sensory assessment; traditional meat product
- 13 February 2025
- Published by Central Research Institute of Food and Feed Control in Gıda ve Yem Bilimi Teknolojisi Dergisi
- No. 33,p. 40-50
Open AccessGoose Meat: Salting/drying effect on nutritional value, physicochemical and sensory properties
Objective: In Kars and Ardahan, where climatic conditions are suitable for goose farming, the consumption of goose meat has been an integral part of local cuisine for generations. In conventional production, salting and drying play pivotal roles in enhancing flavor and preserving goose meat. This study aimed to identify the nutritional, physicochemical, and sensory properties of goose meat subjected to different salting and drying levels. Materials and methods: In this study, 16 naturally reared geese were collected from Hanak district of Ardahan province. Traditional cooking methods prevalent in the region, classical boiling and oven cooking, have been applied without the use of salt, spices, or food additives. Breast muscle samples were used for each treatment group. Subsequently, various analyses of physicochemical properties and nutritional parameters, including salt content, dry matter, pH, protein, fat, cooking loss, mineral content, and cholesterol level, were conducted for the raw and/or cooked samples. Sensory analysis was performed to assess the acceptability of the samples. Discussion and results: According to the results obtained, the most abundant minerals in the goose meat samples were determined as sodium (Na), potassium (K), phosphorus (P), magnesium (Mg), and iron (Fe), respectively. The amount of salt and drying time significantly affected cooking loss (P < 0.01). Additionally, it was found that different salting and drying levels significantly affected the overall consumer acceptability of goose meat (P < 0.01). Finally, it was concluded that the optimization of traditional salting and drying techniques not only enhances the flavor and shelf life of meat, but also plays a crucial role in meeting consumer demands for quality and nutritional value. Keywords: dry-cured; goose meat; nutrition; salting; sensory assessment; traditional meat product
- Open Access
- 25 December 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (1) , 2
Chitosan/TiO2/Rosmarinic Acid Bio-Nanocomposite Coatings: Characterization and Preparation
This study aimed to develop and characterize bio-nanocomposite coatings by incorporating titanium nanoparticles (TiO2 NPs) (30–50 nm) (10 mg/L), which have antimicrobial effects, and rosmarinic acid (RA) (0.005 mg/mL), which has strong antioxidant and antimicrobial activities, into the chitosan matrix using the solvent casting method. The prepared bio-nanocomposite coatings were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM-EDX), and atomic force microscopy (AFM). In the XRD analysis, the crystal structure of the bio-nanocomposite coating material was evaluated, but the absence of the expected TiO2 NPs diffraction peak in the coating containing TiO2 NPs was discussed in detail. The TiO2 NPs decreased the crystallinity, compared to the control film, while rosmarinic acid increased the order of the molecular matrix. FT-IR analysis showed the presences of O–H, C=O, and C–O bonds in the coating materials, and the changes in the positions and intensities of the bands observed in the FTIR spectra of the bio-nanocomposite coatings (CHT and CHTRA) proved that TiO2 NPs and RA were successfully integrated into the chitosan matrix. The broadening and flattening of the bands belonging to OH groups (3288–3356 cm−1) indicated that the hydrogen bonds in the chitosan matrix were strengthened during the formation of the bio-nanocomposite structure. The bands representing the C=O stretching vibrations at 1659 cm−1 (amide I) and the N–H bending vibrations at 1558 cm−1 (amide II) indicated protein-based features in the structure of chitosan and confirmed the existence of the bio-nanocomposite structure. The SEM-EDX analysis showed that TiO2 NPs were distributed homogeneously on the chitosan surface, but there was aggregation in places. The AFM images revealed that when TiO2 NPs and RA were added to the chitosan matrix, the surface topography became more homogeneous, and a topographic pattern was formed in the range of 0–20.4 nm. Therefore, it is concluded that these bio-nanocomposite coatings can be used in antimicrobial surfaces and food packaging areas and should be optimized with different antioxidant and nanoparticle combinations in the future.
- 25 December 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (1) , 2
Open AccessChitosan/TiO2/Rosmarinic Acid Bio-Nanocomposite Coatings: Characterization and Preparation
This study aimed to develop and characterize bio-nanocomposite coatings by incorporating titanium nanoparticles (TiO2 NPs) (30–50 nm) (10 mg/L), which have antimicrobial effects, and rosmarinic acid (RA) (0.005 mg/mL), which has strong antioxidant and antimicrobial activities, into the chitosan matrix using the solvent casting method. The prepared bio-nanocomposite coatings were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM-EDX), and atomic force microscopy (AFM). In the XRD analysis, the crystal structure of the bio-nanocomposite coating material was evaluated, but the absence of the expected TiO2 NPs diffraction peak in the coating containing TiO2 NPs was discussed in detail. The TiO2 NPs decreased the crystallinity, compared to the control film, while rosmarinic acid increased the order of the molecular matrix. FT-IR analysis showed the presences of O–H, C=O, and C–O bonds in the coating materials, and the changes in the positions and intensities of the bands observed in the FTIR spectra of the bio-nanocomposite coatings (CHT and CHTRA) proved that TiO2 NPs and RA were successfully integrated into the chitosan matrix. The broadening and flattening of the bands belonging to OH groups (3288–3356 cm−1) indicated that the hydrogen bonds in the chitosan matrix were strengthened during the formation of the bio-nanocomposite structure. The bands representing the C=O stretching vibrations at 1659 cm−1 (amide I) and the N–H bending vibrations at 1558 cm−1 (amide II) indicated protein-based features in the structure of chitosan and confirmed the existence of the bio-nanocomposite structure. The SEM-EDX analysis showed that TiO2 NPs were distributed homogeneously on the chitosan surface, but there was aggregation in places. The AFM images revealed that when TiO2 NPs and RA were added to the chitosan matrix, the surface topography became more homogeneous, and a topographic pattern was formed in the range of 0–20.4 nm. Therefore, it is concluded that these bio-nanocomposite coatings can be used in antimicrobial surfaces and food packaging areas and should be optimized with different antioxidant and nanoparticle combinations in the future.
- Open Access
- 1 November 2023
- Published by Springer Nature in Food Science of Animal Resources
- Vol. 43 (6) , 1170-1182
The Effect of a Chitosan/TiO2-Nanoparticle/ Rosmarinic Acid-Based Nanocomposite Coating on the Preservation of Refrigerated Rainbow Trout Fillets (Oncorhynchus mykiss)
Food Science of Animal Resources (Food Sci. Anim. Resour.) is an international, peer-reviewed bimonthly journal publishing original research and reviews on basic and applied aspects of the use of animal resources including the meat, egg, dairy, and edible insect/worm products. Food Sci. Anim. Resour. is published and distributed by the Korean Society for Food Science of Animal Resources.
- 1 November 2023
- Published by Springer Nature in Food Science of Animal Resources
- Vol. 43 (6) , 1170-1182
Open AccessThe Effect of a Chitosan/TiO2-Nanoparticle/ Rosmarinic Acid-Based Nanocomposite Coating on the Preservation of Refrigerated Rainbow Trout Fillets (Oncorhynchus mykiss)
Food Science of Animal Resources (Food Sci. Anim. Resour.) is an international, peer-reviewed bimonthly journal publishing original research and reviews on basic and applied aspects of the use of animal resources including the meat, egg, dairy, and edible insect/worm products. Food Sci. Anim. Resour. is published and distributed by the Korean Society for Food Science of Animal Resources.
- 12 May 2023
- Published by Igdir University in Journal of the Institute of Science and Technology
- p. 2154-2159
The Potential Antioxidant Effects Of Ziziphus Jujube On Melanoma Cells
- 12 May 2023
- Published by Igdir University in Journal of the Institute of Science and Technology
- p. 2154-2159
The Potential Antioxidant Effects Of Ziziphus Jujube On Melanoma Cells