Andreas Schäuble
Research Subjects
Research Interests
Andreas Schäuble has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Nicolas Bailly
Laboratoire de Biomécanique Appliquée, Aix-Marseille Université, Université Gustave Eiffel, 13015 Marseille, France
3 shared publications - Yvan Petit
Department of Mechanical Engineering, École de Technologie Supérieure, Montréal, Canada
3 shared publications - Marianne Guesneau
Aix-Marseille Univ, Univ Gustave Eiffel, LBA
1 shared publication Marion Fournier
École de Technologie Supérieure
1 shared publication- Marion Fournier
École de technologie supérieure, 1100 Rue Notre Dame O, Montréal, QC, H3C 1K3, Canada
1 shared publication Wei Wei
Aix-Marseille Univ, Univ Gustave Eiffel, LBA
1 shared publication
Latest Publications
- 25 February 2025
- Published by Taylor & Francis in Traffic Injury Prevention
- Vol. 26 (7) , 866-873
Assessing bicycle helmet protection for head and neck in E-scooter falls
The rapid increase in E-scooter usage has led to more scooter-related head and neck injuries. Yet, experimental data on head impacts and helmet effectiveness during crashes are scarce. The objectives of this study are to experimentally evaluate bicycle helmets in E-scooter falls, assessing head kinematics, impact conditions, and injury risks in two crash scenarios with and without helmets. Six E-scooter forward falls, induced by a curb collision at 20 km/h, were simulated in sled tests using a Hybrid III 50th anthropomorphic test device with and without a helmet. The curb was positioned either perpendicularly or at a 55° angle to the E-scooter's trajectory. Head velocity, head acceleration, neck load, chest acceleration, and chest deflection were measured. The average normal and tangential head velocities at impact were 5.9 m/s and 3.7 m/s, respectively. In configurations without helmet, both head accelerations and neck loads exceeded some injury thresholds, indicating a risk of severe injury. Using a helmet significantly reduced peak head linear (143 g vs. 571 g) and rotational (9.8 krad/s2 vs. 23.1 krad/s2) accelerations, and Head Injury Criterion (HIC) (792 vs. 5868). However, it did not significantly affect peak head rotational velocity (44.5 rad/s vs. 41.5 rad/s), neck load (in flexion-compression) nor Neck Injury Criterion (NIJ) (1.2 vs. 1.0). The bicycle helmet significantly reduced most head injury metrics. Yet, the risk of severe head and neck injuries remains high. These results offer valuable data for evaluating head protection and developing and validating numerical crash test reconstructions for further investigations.
- 25 February 2025
- Published by Taylor & Francis in Traffic Injury Prevention
- Vol. 26 (7) , 866-873
Assessing bicycle helmet protection for head and neck in E-scooter falls
The rapid increase in E-scooter usage has led to more scooter-related head and neck injuries. Yet, experimental data on head impacts and helmet effectiveness during crashes are scarce. The objectives of this study are to experimentally evaluate bicycle helmets in E-scooter falls, assessing head kinematics, impact conditions, and injury risks in two crash scenarios with and without helmets. Six E-scooter forward falls, induced by a curb collision at 20 km/h, were simulated in sled tests using a Hybrid III 50th anthropomorphic test device with and without a helmet. The curb was positioned either perpendicularly or at a 55° angle to the E-scooter's trajectory. Head velocity, head acceleration, neck load, chest acceleration, and chest deflection were measured. The average normal and tangential head velocities at impact were 5.9 m/s and 3.7 m/s, respectively. In configurations without helmet, both head accelerations and neck loads exceeded some injury thresholds, indicating a risk of severe injury. Using a helmet significantly reduced peak head linear (143 g vs. 571 g) and rotational (9.8 krad/s2 vs. 23.1 krad/s2) accelerations, and Head Injury Criterion (HIC) (792 vs. 5868). However, it did not significantly affect peak head rotational velocity (44.5 rad/s vs. 41.5 rad/s), neck load (in flexion-compression) nor Neck Injury Criterion (NIJ) (1.2 vs. 1.0). The bicycle helmet significantly reduced most head injury metrics. Yet, the risk of severe head and neck injuries remains high. These results offer valuable data for evaluating head protection and developing and validating numerical crash test reconstructions for further investigations.
- Open Access
- 2 April 2023
- Published by Elsevier in SSRN Electronic Journal
Head impact kinematics and injury risks during E-scooter collisions against a curb
E-scooters as a mode of transportation is rapidly growing in popularity. This study evaluates head impact conditions and injury risk associated with E-scooter crashes. A multibody model of E-scooter falls induced by wheel-curb collision was built and compared with an experimental E-scooter crash test. A total of 162 crash scenarios were simulated to assess the effect of fall conditions (E-scooter initial speed and inclination, obstacle orientation, and user size) on the head impact kinematics. The forehead hit the ground first in 44% of simulations. The average tangential and normal impact speeds were 3.5 m/s and 4.8 m/s respectively. Nearly 100% of simulations identified a risk of concussion (linear acceleration peak >82 g and rotational acceleration peak >6 383 rad/s2) and 90% of simulations suggested a risk of severe head injuries (HIC>700). This work provides preliminary data useful for the assessment and design of protective gears.
- 2 April 2023
- Published by Elsevier in SSRN Electronic Journal
Open AccessHead impact kinematics and injury risks during E-scooter collisions against a curb
E-scooters as a mode of transportation is rapidly growing in popularity. This study evaluates head impact conditions and injury risk associated with E-scooter crashes. A multibody model of E-scooter falls induced by wheel-curb collision was built and compared with an experimental E-scooter crash test. A total of 162 crash scenarios were simulated to assess the effect of fall conditions (E-scooter initial speed and inclination, obstacle orientation, and user size) on the head impact kinematics. The forehead hit the ground first in 44% of simulations. The average tangential and normal impact speeds were 3.5 m/s and 4.8 m/s respectively. Nearly 100% of simulations identified a risk of concussion (linear acceleration peak >82 g and rotational acceleration peak >6 383 rad/s2) and 90% of simulations suggested a risk of severe head injuries (HIC>700). This work provides preliminary data useful for the assessment and design of protective gears.