Mingyun Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mingyun Xie has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Hong Liu
Shanghai Jiao Tong University
5 shared publications - Miaosheng He
Shanghai Jiao Tong University
5 shared publications - Xiaobin Huang
Shanghai Jiao Tong University
5 shared publications - Bin Yu
Shanghai Jiao Tong University
4 shared publications - Shengqi Wu
Shanghai Jiao Tong University
4 shared publications - Wei Wang3 shared publications
Latest Publications
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Characteristics of ultra-strong swirl flow field and its effects on liquid jet breakup and atomization
This study investigated the influence of swirl number (Sn = 0–3.9) on the flow characteristics and atomization behavior of coaxial liquid jets. Velocity and vorticity fields, jet breakup processes, and droplet dynamic characteristics were analyzed within a wide range of swirl numbers. Results showed that geometric swirl numbers agreed well with experimental and numerical swirl numbers under weak swirl conditions, but were significantly higher at ultra-strong swirl conditions due to flow separation and angular momentum loss. The central toroidal recirculation zone (CTRZ) was small at weak swirl condition, but expanded significantly with increasing swirl numbers due to enhanced centrifugal force. The flow field evolved from a single-vortex feature (at weak swirl) to dual- and multi-vortex features (at strong and ultra-strong swirl), resulting in more homogeneously distributed vorticity. After introducing the liquid jet, flow stability decreased significantly as the swirl number increased. Under weak swirl condition, the CTRZ remained suppressed and the flow structure was relatively stable. Under ultra-strong swirl condition, the CTRZ expanded dramatically and flow instability intensified. Furthermore, as the swirl number increased, both the normalized breakup location and timing of the jet were delayed. However, atomization was improved with increasing swirl number, and the droplet dynamic characteristics transitioned from jet-dominated to swirl-dominated.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Characteristics of ultra-strong swirl flow field and its effects on liquid jet breakup and atomization
This study investigated the influence of swirl number (Sn = 0–3.9) on the flow characteristics and atomization behavior of coaxial liquid jets. Velocity and vorticity fields, jet breakup processes, and droplet dynamic characteristics were analyzed within a wide range of swirl numbers. Results showed that geometric swirl numbers agreed well with experimental and numerical swirl numbers under weak swirl conditions, but were significantly higher at ultra-strong swirl conditions due to flow separation and angular momentum loss. The central toroidal recirculation zone (CTRZ) was small at weak swirl condition, but expanded significantly with increasing swirl numbers due to enhanced centrifugal force. The flow field evolved from a single-vortex feature (at weak swirl) to dual- and multi-vortex features (at strong and ultra-strong swirl), resulting in more homogeneously distributed vorticity. After introducing the liquid jet, flow stability decreased significantly as the swirl number increased. Under weak swirl condition, the CTRZ remained suppressed and the flow structure was relatively stable. Under ultra-strong swirl condition, the CTRZ expanded dramatically and flow instability intensified. Furthermore, as the swirl number increased, both the normalized breakup location and timing of the jet were delayed. However, atomization was improved with increasing swirl number, and the droplet dynamic characteristics transitioned from jet-dominated to swirl-dominated.
- 24 October 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (10)
Numerical simulation and modeling of a liquid jet in supersonic crossflow
- 24 October 2025
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 10 (10)
Numerical simulation and modeling of a liquid jet in supersonic crossflow
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Error analysis and optimization of the coupled volume of fluid and Lagrangian particle tracking method for liquid jets in crossflow simulations
The transformation criterion is critical for the coupled volume of fluid and lagrangian particle tracking (VOF-LPT) method for jet breakup and atomization simulations, which determines the conversion from VOF droplets to Lagrangian particles. It is usually developed based on experience, varies among researchers (e.g., different maximum transformation diameter), and consequently leads to considerable computational errors. To mitigate such errors in simulations of liquid jets in crossflow (LJCF), an optimized transformation criterion of the VOF-LPT method was developed and validated in this study. First, a comprehensive parametric study of a two-dimensional LJCF case was conducted to investigate the primary breakup process. It was found that liquid column deformation was more sensitive to mesh resolution than to interface capturing methods, and a minimum of 32 cells across the jet diameter was essential to accurately capture the periodic deformation characteristics. Second, the secondary breakup process was studied through detailed three-dimensional simulations of droplets in crossflow. An optimized transformation criterion was developed based on quantitative error analysis of the droplet displacement of VOF and LPT methods. It was established based on the local droplet Weber number and local mesh resolution, and without any coefficient that needs calibration. Finally, the proposed criterion was validated using a three-dimensional LJCF case, demonstrating a remarkable improvement of over 30% in droplet size prediction accuracy compared to conventional implementations based on the maximum diameter criterion.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Error analysis and optimization of the coupled volume of fluid and Lagrangian particle tracking method for liquid jets in crossflow simulations
The transformation criterion is critical for the coupled volume of fluid and lagrangian particle tracking (VOF-LPT) method for jet breakup and atomization simulations, which determines the conversion from VOF droplets to Lagrangian particles. It is usually developed based on experience, varies among researchers (e.g., different maximum transformation diameter), and consequently leads to considerable computational errors. To mitigate such errors in simulations of liquid jets in crossflow (LJCF), an optimized transformation criterion of the VOF-LPT method was developed and validated in this study. First, a comprehensive parametric study of a two-dimensional LJCF case was conducted to investigate the primary breakup process. It was found that liquid column deformation was more sensitive to mesh resolution than to interface capturing methods, and a minimum of 32 cells across the jet diameter was essential to accurately capture the periodic deformation characteristics. Second, the secondary breakup process was studied through detailed three-dimensional simulations of droplets in crossflow. An optimized transformation criterion was developed based on quantitative error analysis of the droplet displacement of VOF and LPT methods. It was established based on the local droplet Weber number and local mesh resolution, and without any coefficient that needs calibration. Finally, the proposed criterion was validated using a three-dimensional LJCF case, demonstrating a remarkable improvement of over 30% in droplet size prediction accuracy compared to conventional implementations based on the maximum diameter criterion.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
The rotation-diffusion dynamic ignition process in a coupled swirler-cavity hyperburner under high-speed and low-temperature extreme conditions
In the tandem turbine-based combined cycle engine's hyperburner, the complex intrusive design is usually employed to achieve ignition and stable combustion under high-speed and low-temperature extreme conditions. This paper proposes a concise, non-intrusive coupled swirler-cavity configuration to supply the fuel with good atomization at the cavity-trapped vortex center, thereby ensuring the formation of the initial flame kernel. Under the guidance of the cavity-trapped vortex, the initial flame kernel grows through a dynamic “rotation-diffusion” mechanism. Compared to previous studies, the present work achieves ignition and stable combustion under higher incoming Mach numbers (Ma = 0.3, 0.4, 0.5) and lower temperatures (T0 = 300 K).
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
The rotation-diffusion dynamic ignition process in a coupled swirler-cavity hyperburner under high-speed and low-temperature extreme conditions
In the tandem turbine-based combined cycle engine's hyperburner, the complex intrusive design is usually employed to achieve ignition and stable combustion under high-speed and low-temperature extreme conditions. This paper proposes a concise, non-intrusive coupled swirler-cavity configuration to supply the fuel with good atomization at the cavity-trapped vortex center, thereby ensuring the formation of the initial flame kernel. Under the guidance of the cavity-trapped vortex, the initial flame kernel grows through a dynamic “rotation-diffusion” mechanism. Compared to previous studies, the present work achieves ignition and stable combustion under higher incoming Mach numbers (Ma = 0.3, 0.4, 0.5) and lower temperatures (T0 = 300 K).
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
A mean-error-based time-step control method for detonation simulation
To improve the computational efficiency in implicit-explicit (IMEX) algorithms for stiff detonation problems, the Mean Error Time Control (METC) method is proposed. The core of METC is a novel selected full-field error estimation. This method estimates the full-field error by averaging the errors in regions of significant stiffness. An error controller with integral (I) feedback is then used to determine the neighboring time-step ratios to obtain time-steps within the IMEX stability range. This new strategy ensures a larger time-step while maintaining higher simulation accuracy and making the time-step change more smoothly, providing a reasonable approximation of full-field time error. It is been tested on one-dimensional, two-dimensional oblique, and rotating detonation cases. Compared with the fixed Courant–Friedrichs–Lewy number method, the METC method achieves speedup ratios of 1.48–5.60 for all types of detonation problems related to hydrogen fuels, and the speedup ratio is up to 4.67 for hydrocarbon fuels with greater stiffness. The METC method overcomes the inefficiencies caused by too small a time-step in the Proportional–Integral method in multidimensional reaction flows.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
A mean-error-based time-step control method for detonation simulation
To improve the computational efficiency in implicit-explicit (IMEX) algorithms for stiff detonation problems, the Mean Error Time Control (METC) method is proposed. The core of METC is a novel selected full-field error estimation. This method estimates the full-field error by averaging the errors in regions of significant stiffness. An error controller with integral (I) feedback is then used to determine the neighboring time-step ratios to obtain time-steps within the IMEX stability range. This new strategy ensures a larger time-step while maintaining higher simulation accuracy and making the time-step change more smoothly, providing a reasonable approximation of full-field time error. It is been tested on one-dimensional, two-dimensional oblique, and rotating detonation cases. Compared with the fixed Courant–Friedrichs–Lewy number method, the METC method achieves speedup ratios of 1.48–5.60 for all types of detonation problems related to hydrogen fuels, and the speedup ratio is up to 4.67 for hydrocarbon fuels with greater stiffness. The METC method overcomes the inefficiencies caused by too small a time-step in the Proportional–Integral method in multidimensional reaction flows.
- Open Access
- 1 November 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (11)
On space–time diversity in shock train self-excited oscillation mode during wide-range evolution in a scramjet isolator
The shock train self-excited oscillation can induce combustor instabilities and reduce engine margin. In a dual-mode scramjet, the shock train undergoes a complete evolution process, exhibiting structural changes closely tied to this inherent unsteadiness. This study aims to elucidate the space–time diversity in shock train self-excited oscillation mode and the underlying mechanisms during wide-range evolution. The experimental investigations were conducted at Ma = 1.95, capturing the complete evolution of the shock train. The results indicate the evolution can be categorized into three regimes based on structural characteristics. In regime I, the shock region gradually forms, followed by the occurrence of the mixing region in regime II. Regime III corresponds to inlet unstart. In regime II, isolator outlet pressure fluctuations exhibit higher frequency and lower amplitude compared to regime I, while the shock motion demonstrates lower frequency and higher amplitude. The shock train behaves in a large-scale, low-frequency (1.53 times the duct height, 10 Hz) unsteady motion in regime II, posing a potential threat to engine operation. Coherence and phase analysis reveal the disturbance source originates downstream. Proper orthogonal decomposition modal analysis shows two oscillation modes: low-frequency components correspond to shock motion, and high-frequency components correspond to pressure fluctuations across the entire pseudoshock. The propagating of downstream disturbance differs between the two regimes. In regime I, the shock train exhibits rigid-body motion synchronously. In regime II, the relative motion between each shock wave and the cumulative effect of pressure disturbance lead to frequency decay upstream, amplifying the shock train motion.
- 1 November 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (11)
Open AccessOn space–time diversity in shock train self-excited oscillation mode during wide-range evolution in a scramjet isolator
The shock train self-excited oscillation can induce combustor instabilities and reduce engine margin. In a dual-mode scramjet, the shock train undergoes a complete evolution process, exhibiting structural changes closely tied to this inherent unsteadiness. This study aims to elucidate the space–time diversity in shock train self-excited oscillation mode and the underlying mechanisms during wide-range evolution. The experimental investigations were conducted at Ma = 1.95, capturing the complete evolution of the shock train. The results indicate the evolution can be categorized into three regimes based on structural characteristics. In regime I, the shock region gradually forms, followed by the occurrence of the mixing region in regime II. Regime III corresponds to inlet unstart. In regime II, isolator outlet pressure fluctuations exhibit higher frequency and lower amplitude compared to regime I, while the shock motion demonstrates lower frequency and higher amplitude. The shock train behaves in a large-scale, low-frequency (1.53 times the duct height, 10 Hz) unsteady motion in regime II, posing a potential threat to engine operation. Coherence and phase analysis reveal the disturbance source originates downstream. Proper orthogonal decomposition modal analysis shows two oscillation modes: low-frequency components correspond to shock motion, and high-frequency components correspond to pressure fluctuations across the entire pseudoshock. The propagating of downstream disturbance differs between the two regimes. In regime I, the shock train exhibits rigid-body motion synchronously. In regime II, the relative motion between each shock wave and the cumulative effect of pressure disturbance lead to frequency decay upstream, amplifying the shock train motion.
- Open Access
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Primary breakup model development for trajectory prediction of liquid jets in subsonic crossflow
A comprehensive theoretical model for the primary breakup of liquid jets in subsonic crossflow was developed. The model theoretically analyzed the jet deformation process, mass stripping process, and the influence of several critical forces and consequently provided highly accurate predictions of the jet trajectory. Deformation of the liquid jet cross section was considered as a two-stage process based on the physical characteristics, including the spring-mass analogy deformation and the mass stripping induced deformation. The mass stripping process was modeled as an exponential function of time based on experimental findings for liquid jets and droplets. Balance of critical forces acting on the jet were analyzed, both along the gas and jet flow directions, which included aerodynamic drag, viscous force, surface tension, and gravitation. The model provided precise prediction to the jet trajectory against experimental data without any initial jet velocity assumption across a wide range of gaseous Weber numbers and gas to liquid momentum ratios. In addition, quantitative effects of viscous force, surface tension force, and aerodynamic drag on jet trajectory were fully investigated based on the new model, which provided more insight into jet breakup characteristics and the effects of fuel properties on jet trajectory and deformation. Furthermore, the three-dimensional structure of the jet was reconstructed through the present model, which matched well against numerical results. Importantly, the current mathematical primary breakup model could be integrated with Lagrangian methods, obtaining more detailed vortex structures and accurate droplet dispersion with reduced computational time.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Open AccessPrimary breakup model development for trajectory prediction of liquid jets in subsonic crossflow
A comprehensive theoretical model for the primary breakup of liquid jets in subsonic crossflow was developed. The model theoretically analyzed the jet deformation process, mass stripping process, and the influence of several critical forces and consequently provided highly accurate predictions of the jet trajectory. Deformation of the liquid jet cross section was considered as a two-stage process based on the physical characteristics, including the spring-mass analogy deformation and the mass stripping induced deformation. The mass stripping process was modeled as an exponential function of time based on experimental findings for liquid jets and droplets. Balance of critical forces acting on the jet were analyzed, both along the gas and jet flow directions, which included aerodynamic drag, viscous force, surface tension, and gravitation. The model provided precise prediction to the jet trajectory against experimental data without any initial jet velocity assumption across a wide range of gaseous Weber numbers and gas to liquid momentum ratios. In addition, quantitative effects of viscous force, surface tension force, and aerodynamic drag on jet trajectory were fully investigated based on the new model, which provided more insight into jet breakup characteristics and the effects of fuel properties on jet trajectory and deformation. Furthermore, the three-dimensional structure of the jet was reconstructed through the present model, which matched well against numerical results. Importantly, the current mathematical primary breakup model could be integrated with Lagrangian methods, obtaining more detailed vortex structures and accurate droplet dispersion with reduced computational time.