PGPrashik Sunil Gaikwad

Prashik Sunil Gaikwad

*This is an algorithmically generated author record based on publicly available information.

Prashik Sunil Gaikwad has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-Throughput Computational Screening of Sodium Niobates as All-Solid-State Battery Electrolytes

    by Prashik Gaikwad, Tanmoy Chakraborty, Arielle Fitkin, Paul Whalley, Bora Karasulu

    The growing global demand for lithium, coupled with its limited availability and rising costs, underscores the urgent need for alternative energy storage solutions. Sodium-based all-solid-state batteries (Na-ASSBs) offer a promising pathway due to sodium's abundance, cost-effectiveness, and favorable electrochemical properties. Among potential materials for Na-ASSBs, niobium (Nb)-based oxides, particularly sodium-niobate-oxides (Na−Nb−O), emerge as compelling candidates due to their intrinsic structural stability, wide electrochemical windows, and potential for fast ion transport. In this study, we employ first-principles density functional theory-based crystal structure prediction techniques to explore the compositional landscape of Na−Nb−O ternary compounds. Over 27,000 hypothetical structures were generated and screened based on their thermodynamic stability, and low-lying structures were further screened for dynamic stability, electronic properties, mechanical stability, and ionic conductivity. This high-throughput computational investigation identified a promising Na−Nb−O stoichiometry with desirable properties for solid-state electrolyte (SSE) applications.

  • Open Access

    High - Throughput Computational Screening of Sodium Niobates for Next-Generation All-Solid State Battery Applications

    by Prashik Gaikwad, Tanmoy Chakraborty, Arielle Fitkin, Paul Whalley, Bora Karasulu

    The growing global demand for lithium, coupled with its limited availability and rising costs, underscores the urgent need for alternative energy storage solutions. Sodium-based all-solid-state batteries (Na-ASSBs) offer a promising pathway due to sodium's abundance, cost-effectiveness, and favorable electrochemical properties. Among potential materials for Na-ASSBs, niobium (Nb)-based oxides, particularly sodium-niobate-oxides (Na-Nb-O), emerge as compelling candidates due to their intrinsic structural stability, wide electrochemical windows, and potential for fast ion transport. In this study, we employ first-principles density functional theory (DFT) – based crystal structure predictions techniques to explore the compositional landscape of Na-Nb-O ternary compounds. Over 27,000 hypothetical structures were generated and screened based on their thermodynamic stability and low-lying structures were further screened for dynamic stability, electronic properties, mechanical stability, and ionic conductivity. This high-throughput computational investigation identifies two novel Na-Nb-O stoichiometries with desirable properties for solid state electrolyte (SSE) applications.

  • Open Access

    eReaxFF force field development for BaZr0.8Y0.2O3-δ solid oxide electrolysis cells applications

    by Jamil Hossain, Prashik Gaikwad, Yun Kyung Shin, Jessica A. Schulze, Katheryn A. Penrod, Meng Li, Yuxiao Lin, Gorakh Pawar, Adri C. T. van Duin

    The use of solid-oxide materials in electrocatalysis applications, especially in hydrogen-evolution reactions, is promising. However, further improvements are warranted to overcome the fundamental bottlenecks to enhancing the performance of solid-oxide electrolysis cells (SOECs), which is directly linked to the more-refined fundamental understanding of complex physical and chemical phenomena and mass exchanges that take place at the surfaces and in the bulk of electrocatalysis materials. Here, we developed an eReaxFF force field for barium zirconate doped with 20 mol% of yttrium, BaZr0.8Y0.2O3-δ (BZY20) to enable a systematic, large-length-scale, and longer-timescale atomistic simulation of solid-oxide electrocatalysis for hydrogen generation. All parameters for the eReaxFF were optimized to reproduce quantum-mechanical (QM) calculations on relevant condensed phase and cluster systems describing oxygen vacancies, vacancy migrations, electron localization, water adsorption, water splitting, and hydrogen generation on the surfaces of the BZY20 solid oxide. Using the developed force field, we performed both zero-voltage (excess electrons absent) and non-zero-voltage (excess electrons present) molecular dynamics simulations to observe water adsorption, water splitting, proton migration, oxygen-vacancy migrations, and eventual hydrogen-production reactions. Based on investigations offered in the present study, we conclude that the eReaxFF force field-based approach can enable computationally efficient simulations for electron conductivity, electron leakage, and other non-zero-voltage effects on the solid oxide materials using the explicit-electron concept. Moreover, we demonstrate how the eReaxFF force field-based atomistic-simulation approach can enhance our understanding of processes in SOEC applications and potentially other renewable-energy applications.


  • Open Access

    Modeling Dynamic Evolution of Oxygen Vacancies in Solid Oxide Materials

    by Prashik S. Gaikwad, Gorakh Pawar, Yun Kyung Shin, Jamil Hossain, Adri van Duin

    SOEC is a promising H2 generation technology for mitigating climate change. Novel material design and optimization strategies, such as oxygen vacancy chemistries, can enhance SOEC efficiency. In this study, Monte Carlo-ReaxFF and eReaxFF simulations were used to study oxygen vacancies (Ov) and electron migration in BZY20 solid oxide material. Our results shows that Ov migrate towards the surface, increasing surface Ov concentration by 10%. Yttrium restricts electron mobility and functions as an electron trapping site, while Zr accelerates electron mobility and migration. These insights could improve solid-state electrolytes’ electrochemical performance in renewable energy applications.


  • Open Access

    Study of nanocomposite materials using molecular dynamics

    by Prashik Sunil Gaikwad

    There is an increase in demand for new lightweight structural materials in the aerospace industry for more efficient and affordable human space travel. Polymer matrix composites (PMCs) with reinforcement material as carbon nanotubes (CNTs) have shown exceptional increase in the mechanical properties. Flattened carbon nanotubes (flCNTs) are a primary component of many carbon nanotube (CNT) yarn and sheet materials, which are promising reinforcements for the next generation of ultra-strong composites for aerospace applications. These flCNT/polymer materials are subjected to extreme pressure and temperature during curing process. Therefore there is a need to investigate the evolution of properties during the curing process. Also, to facilitate the design, fabrication, and testing of flCNT-based composites for aerospace structures, experimental methods can be expensive and time consuming. Hence, computational modeling tools like molecular dynamics (MD) can be used to efficiently used to accurately predict properties. Thus, reducing the overall time in designing next generation of composite materials. In this research, MD tool is implemented to model the flCNT sheets and polybenzoxazine (PBZ) based composite material to study the interfacial properties and wetting properties of flCNT-PBZ. flCNT - amorphous carbon (AC) structures were modeled to investigate the role of AC on the interfacial properties of flCNT-AC using Reactive force field (ReaxFF). Furthermore, defects and crosslinks were introduced within and between the two flCNTs sheets, to investigate the effect of radiation induced damage and crosslinks on the transverse and axial properties of flCNTs. Finally, Reactive Interface force field (IFF-R) was used to model the PBZ resin system and evolution of properties with degree of cure was predicted. These nanoscale properties provide a set of inputs for microscale analysis to predict the evolution of residual stresses for process modeling of composites.

  • Open Access

    Enhancing the Faradaic efficiency of solid oxide electrolysis cells: progress and perspective

    by Prashik S. Gaikwad, Kunal Mondal, Yun Kyung Shin, Adri C. T. van Duin, Gorakh Pawar

    To reduce global warming, many countries are shifting to sustainable energy production systems. Solid oxide electrolysis cells (SOECs) are being considered due to their high hydrogen generation efficiency. However, low faradaic efficiency in scaling SOEC technology affects costs and limits large-scale adoption of hydrogen as fuel. This review covers SOECs’ critical aspects: current state-of-the-art anode, cathode, and electrolyte materials, operational and materials parameters affecting faradaic efficiency, and computational modeling techniques to resolve bottlenecks affecting SOEC faradaic efficiency.


  • Open Access

    Wetting Simulations of High-Performance Polymer Resins on Carbon Surfaces as a Function of Temperature Using Molecular Dynamics

    by Swapnil S. Bamane, Prashik S. Gaikwad, Matthew S. Radue, S. Gowtham, Gregory M. Odegard

    Resin/reinforcement wetting is a key parameter in the manufacturing of carbon nanotube (CNT)-based composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. As experimental measurement of contact angle can be difficult when screening multiple high-performance resins with CNT materials such as CNT bundles or yarns, computational approaches are necessary to facilitate CNT composite material design. A molecular dynamics simulation method is developed to predict the contact angle of high-performance polymer resins on CNT surfaces dominated by aromatic carbon, aliphatic carbon, or a mixture thereof (amorphous carbon). Several resin systems are simulated and compared. The results indicate that the monomer chain length, chemical groups on the monomer, and simulation temperature have a significant impact on the predicted contact angle values on the CNT surface. Difunctional epoxy and cyanate ester resins show the overall highest levels of wettability, regardless of the aromatic/aliphatic nature of the CNT material surface. Tetrafunctional epoxy demonstrates excellent wettability on aliphatic-dominated surfaces at elevated temperatures. Bismaleimide and benzoxazine resins show intermediate levels of wetting, while typical molecular weights of polyether ether ketone demonstrate poor wetting on the CNT surfaces.