MÖMüjdat Öztürk

Müjdat Öztürk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Müjdat Öztürk has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Recycling-Based Passive Cooling of PV Panels Using Copper and Aluminum Waste Particles: An Experimental Study

    by Müjdat Öztürk, Ramazan Kayabaşı, Oğuz Taşdemir

    The performance of photovoltaic (PV) modules decreases as operating temperatures rise, particularly under high solar irradiance during summer months. Passive cooling techniques, which operate without external energy input, offer an effective and low cost way to control module temperature and improve electrical output. This study experimentally evaluates two waste based passive cooling materials (aluminum shavings and thin copper fins) mounted on the rear surfaces of PV modules. Three identical 100W monocrystalline panels were tested simultaneously under the same environmental conditions. The first panel was a reference panel, the second panel was coated with aluminum shavings, and the third panel was equipped with thin copper fins recovered from waste capacitor components. These recycled materials were selected for their low cost, availability and high surface area to volume ratio, enabling enhanced convective heat transfer. Temperature, solar irradiance, voltage, current and electrical power were recorded in real time using a custom data acquisition system. During peak radiation hours, the aluminum and copper cooled panels exhibited temperature reductions of approximately 5°C and 8°C, respectively, compared with the reference panel. Correspondingly, the copper cooled panel achieved up to a 5% increase in daily energy output, while the aluminum cooled panel produced a 2–3% improvement. Overall, the results show that lightweight and recyclable passive cooling elements can significantly enhance PV performance without increasing structural load or energy consumption, offering a practical solution for sustainable PV operation in warming climates.

  • Open Access

    Thermodynamic Sustainability Analysis of Sweet Sorghum Production with Renewable Energy Integration

    by Müjdat Öztürk, Arman Ameen

    In response to rising global energy demand and sustainability targets, assessing the energy-related efficiency of agricultural products has become a critical issue. Sweet sorghum is widely recognized as a promising energy crop for sustainable biofuel production, thanks to its low water requirements and high biomass productivity. To the best of the authors’ knowledge, this study provides the first comprehensive cumulative exergy-based evaluation of sweet sorghum production by simultaneously assessing its energy, exergy, and environmental performance using five key indicators: Cumulative Energy Consumption (CEnC, 718.48 MJ/ton), Cumulative Exergy Consumption (CExC, 2031.42 MJ/ton), Cumulative CO2 Emission (CCO2E, 124.01 kg CO2/ton), Cumulative Degree of Perfection (CDP, 2.8) and Renewability Index (RI, 0.64), based on field level data for the production of one ton of sweet sorghum. Input-based analysis revealed that electricity consumption accounted for the largest share of both energy and exergy use, amounting to 334.85 MJ/ton and 1396.32 MJ/ton, respectively. At the same time, irrigation water was identified as a major contributor to carbon emissions. The integration of renewable electricity sources substantially improved system performance, increasing the CDP to 6.32 and the RI to 0.84, corresponding to more than a twofold increase in exergy efficiency and a shift toward a predominantly renewable production system. Overall, the findings highlight the strong potential of sweet sorghum as a sustainable biofuel feedstock and underline the importance of integrated policy and management approaches that simultaneously address energy quality, exergy losses, and carbon emissions in agricultural energy systems.

  • Open Access

    Analysis of Sustainability and the Use of Renewable Energy in the Production of Potatoes in Semi-Arid Agricultural Systems

    by Müjdat Öztürk, Ali Berk, Tunahan Erdem, Chuang-Yao Zhao, Hasan Yildizhan, Arman Ameen

    The potato production process in Konya, Türkiye, was evaluated through a cumulative and system-oriented approach. A functional unit of one ton of potatoes produced was used for all analyses, using region-specific agricultural input data. In this study, the cumulative energy consumption (CEnC), exergy consumption (CExC), and CO2 emissions (CCO2E) of the agricultural production process were determined. Specifically, the sustainability performance of the potato production process was examined through thermodynamic indicators. The results indicate that nitrogen fertilizer accounts for the highest CEnC, reaching 368.94 MJ per ton of potato produced, followed by diesel fuel at 179.64 MJ/ton and electricity at 91.79 MJ/ton. However, the CExC assessment revealed a different pattern, with electricity emerging as the dominant source of exergy depletion. Electricity consumption accounted for 382.75 MJ/ton, representing the largest exergy burden among all inputs, while diesel (166.21 MJ/ton) and nitrogen (154.28 MJ/ton) followed as secondary contributors. A similar trend was observed in the carbon emission analysis. Electricity use resulted in the highest CCO2E value at 12.85 kg CO2/ton, whereas diesel contributed 2.94 kg CO2/ton. Emissions from chemical fertilizers remained notably low, with nitrogen, phosphorus and potassium generating only 0.42, 0.22 and 0.75 kg CO2/ton, respectively. The sustainability indicators further highlighted the system’s performance. The cumulative degree of perfection (CDP) was calculated as 7.34, while the renewability indicator (RI) reached 0.86, suggesting that potato production in Konya demonstrates relatively high thermodynamic efficiency and a strong potential for renewable energy integration. Under a scenario in which agrivoltaic systems (AVS) and fully electric agricultural machinery replace conventional energy inputs, the CDP increased markedly to 21.61 and the RI to 0.95. To the authors’ knowledge, this study is the first thermodynamic analysis of potato production in Türkiye that integrates sustainability indicators with an AVS integration scenario. The proposed framework provides a practical decision support approach for evaluating the integration of renewable energy into agricultural production systems.

  • Open Access

    Exergy-Based Evaluation of Renewable Energy Integration in Onion Production Systems

    by Müjdat Öztürk

    Modern agricultural systems heavily rely on carbon-intensive energy inputs, emphasizing the urgent need to assess and optimize specific crop supply chains from thermodynamic and environmental perspectives. This study presents a comprehensive cumulative assessment of the energy, exergy, and carbon emissions of onion production in Türkiye, utilizing mass, energy, and entropy balance formulations combined with field-survey data from Adıyaman province. The results indicate that the total cumulative energy consumption is 722.28 MJ/ton, with nitrogen fertilizer contributing 61%. The thermodynamic analysis reveals that nitrogen fertilizer, irrigation water, and diesel fuel drive a cumulative exergy consumption of 465.83 MJ/ton, while irrigation water dominates the carbon emission at 20.65 kg CO2/ton. Based on these streams, integrated sustainability indicators specifically the Cumulative Degree of Perfection (CDP) and the Renewability Index (RI) were calculated under conventional and solar modernization scenarios. A renewable energy scenario incorporating photovoltaic-powered irrigation and electrified machinery substantially enhanced thermodynamic perfection and process renewability, increasing CDP from 3.33 to 6.22 and RI from 0.70 to 0.84. These findings offer actionable insights for scaling local solar-driven modernization to mitigate grid dependency and support global Sustainable Development Goals (SDGs) by reducing fossil-fuel integration.


  • Open Access

    Thermodynamic and environmental assessment of apple production in Türkiye: regional comparison and agrivoltaic integration

    by Müjdat Öztürk, Ramazan Kayabaşi, Hasan Yildizhan, Arman Ameen

    This study presents a comprehensive thermodynamic and environmental assessment of apple cultivation across three major production regions in Türkiye: Antalya, Isparta and Niğde. This study is the first to provide an integrated energy, exergy and environmental assessment of agricultural voltaic systems by conducting a resource efficiency and sustainability assessment for open field apple production in Türkiye. Using a functional unit of one ton of apple production, the analysis integrates cumulative energy consumption (CEnC), cumulative exergy consumption (CExC) and cumulative carbon dioxide emissions (CCO 2 E) to reveal the sustainability performance of regional farming systems. The results indicate significant spatial variations linked to climatic and operational factors. Niğde exhibited the highest total energy (3098 MJ/ton) and exergy (2975 MJ/ton) consumptions, mainly due to diesel-powered irrigation and mechanization, resulting in a cumulative carbon footprint of 125 kg CO 2/ ton. Conversely, Antalya recorded the lowest total emissions (33 kg CO 2/ ton) with a balanced energy profile dominated by fertilizers and electricity use. Isparta demonstrated the most thermodynamically efficient and renewable system, achieving the highest cumulative degree of perfection (CDP) (3.80) and Renewability Index (RI) (0.74) values. The integration of agrivoltaic systems (AVS) has further enhanced sustainability across all provinces, particularly in Niğde, by increasing CDP by up to 97%. These findings highlight the significant role that renewable energy integration plays in reducing carbon intensity and increasing resource efficiency in apple cultivation. By providing a region-specific perspective on agricultural thermodynamics, the study provides strategic insights into the transition to sustainable and climate-resilient food production systems in Türkiye.


  • Open Access

    Resource Use Efficiency and Environmental Impacts in Strawberry Production: An Energy–Exergy Analysis

    by Müjdat Öztürk, Ramazan Kayabaşı, Hasan Yildizhan, Arman Ameen

    This study presents a comprehensive sustainability assessment of open field strawberry production in Batman, Türkiye, utilizing thermodynamic-based analyses. The inputs used during the production phase were obtained through survey data collected from local farms over the past few growing seasons. This study is the first to provide an integrated energy, exergy, and environmental assessment of open-field strawberry production in the Batman region, offering novel insights into resource efficiency and sustainability evaluation in agricultural systems. The evaluation was conducted for a functional unit of one ton of strawberries by analysing the cumulative energy consumption (CEnC), cumulative exergy consumption (CExC), and cumulative carbon dioxide emissions (CCO2E). The total CEnC was calculated to be 1207.8 MJ/ton, with nitrogen fertilizer (390.91 MJ/ton) and diesel fuel (229.67 MJ/ton) being the most significant inputs. The total CExC was 1919.82 MJ/ton, where farmyard manure (1170.19 MJ/ton) was the dominant contributor, accounting for approximately 61% of the total. The total carbon footprint (CCO2E) was determined to be 41.43 kg/ton, with irrigation water (10.19 kg/ton) and farmyard manure (10.14 kg/ton) being the primary sources. Key sustainability indicators, the Cumulative Degree of Perfection (CDP) and Renewability Indicator (RI), were calculated as 1.34 and 0.26, respectively. The CDP value is notably higher than that of other open field strawberry studies, while the low RI value indicates a heavy reliance on non-renewable resources. The findings highlight that improving sustainability requires a focus on efficient manure management and reducing fossil fuel-based energy consumption.


  • Investigation of Thermal Comfort and Optimum Supply Water Temperature in the Double Layered Thermally Activated Building System

    by Oguzhan Calisir, Müjdat Öztürk, Gamze Genç

    The adoption of low-temperature heating systems in buildings has become increasingly popular to reduce energy consumption and enhance energy efficiency. In our previous study, a novel hydronic radiant heating system integrating both Underfloor Heating and Thermally Activated Building Systems (TABS) on the same floor was developed. The optimization process was based on thermal comfort criteria defined in ASHRAE 55 and ISO 7730, using floor surface temperatures obtained via FLUENT/ANSYS simulations. The Generalized Reduced Gradient (GRG) algorithm was employed, with Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfaction (PPD) indicators to assess thermal comfort. Present study aims to optimize the supply water temperature for the "Double Layered Thermally Activated Building System" (DLTS), ensuring thermal comfort and energy efficiency. Results indicated that for thermal neutrality, the optimum supply water temperature was 26.66°C, and the optimum surface temperature was 23.60°C. The DLTS system met the comfort criteria with PPD values below 12.14 for class C, demonstrating high user satisfaction. This research highlights the potential of DLTS to improve both energy efficiency and thermal comfort in buildings, offering valuable insights for future building system designs.

  • Open Access

    KIRŞEHİR’İN RÜZGAR ENERJİSİ POTANSİYELİ VE İÇ ANADOLU BÖLGESİ KURULU RÜZGAR ENERJİSİ SANTRALLERİNİN GÜÇ ANALİZİ

    by Müjdat Öztürk, Ramazan Kayabaşı, Oğuz Taşdemir

    Türkiye’nin zengin ve çeşitlilik içeren yenilenebilir enerji potansiyeli, son yıllarda hızla değerlendirilmeye başlanmıştır. Özellikle rüzgar enerjisi, elektrik üretiminde önemli bir rol oynamakta ve kurulu güç içerisindeki payını sürekli artırmaktadır. Çevre dostu bir enerji kaynağı olan rüzgar enerjisi, kırsal bölgelerde de yüksek üretim kapasitesine sahiptir. Bu çalışmada, İç Anadolu Bölgesi illerinin rüzgar potansiyeli ve kurulu santral kapasiteleri; nüfus ve gelişmişlik düzeyleriyle ilişkilendirilerek incelenmiştir. Özel olarak Kırşehir bölgesi ele alınmış ve 2024-2028 yılları arasında bölgedeki rüzgar enerjisi üretim kapasitesi Yapay Sinir Ağları (YSA) tabanlı bir model ile tahmin edilmiştir. Analiz sonuçlarına göre, 2024 yılında rüzgar potansiyelinde yaklaşık %1’lik bir düşüş yaşanması öngörülmüş, ancak 2025-2028 yılları arasında her yıl %1’lik bir artış kaydedilmiştir. 2023 yılındaki üretime kıyasla, 2026 yılında tahmini enerji üretimi %3,5 oranında artış göstermiştir. Aynı şekilde, 2027 ve 2028 yıllarında da enerji üretiminde yükseliş devam etmiştir. Çalışma, İç Anadolu Bölgesi’nin rüzgar enerji potansiyelini detaylı bir şekilde değerlendirirken, Kırşehir ilinde yer alan rüzgar santrali özelinde 2024-2028 yılları arasındaki enerji üretim tahminini ortaya koymuştur. Sonuç olarak, bölgenin mevcut kapasitesi ile potansiyel enerji üretimi ve yıllara göre değişimi kapsamlı bir şekilde analiz edilmiştir.


  • Güneş enerjisinin İç Anadolu Bölgesinde kullanılabilirliği ve sistem analizi

    by Müjdat Öztürk, Ramazan Kayabaşi

    Güneş enerjisinden maksimum faydanın sağlanması için yatırımların üretim açısından daha verimli illere yapılması günümüzde oldukça önem kazanmıştır. Yapılan bu çalışmada, İç Anadolu Bölgesinde bulunan illerin güneş enerji potansiyeli ve güneş enerjisinden elektrik enerjisi olarak yararlanma potansiyeli araştırılmıştır. TRNSYS programı ile hulf cut PV sistemi modellenerek Ankara ve Konya iklim şartlarında bir yıllık elektrik üretim değerleri karşılaştırılmıştır. Konya’da bütün aylarda Ankara’dan daha yüksek sonuçlar elde edilmiştir. Yapılan analizlerde Karaman ve Konya illeri yatırım yapılabilirlik düzeyleri oldukça yüksek bulunmuştur. Konya ili en yüksek kurulu güç oranına sahiptir, fakat Karaman ili analiz sonuçlarına göre güneş enerjisi bakımından en avantajlı il olmasına rağmen yeterli kurulu güç oranına sahip olmadığı görülmüştür.