Joselin Paucarchuco Soto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Joselin Paucarchuco Soto has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Grimaldo Wilfredo Quispe Santivañez
Universidad Nacional Autónoma Altoandina de Tarma
7 shared publications - Henry Juan Javier Ninahuaman
Universidad Tecnológica del Perú
5 shared publications - Elmer Robert Torres Gutiérrez
Universidad Nacional Autónoma Altoandina de Tarma
4 shared publications - Jamir Ever Vilchez De la Cruz
Universidad Nacional Autónoma Altoandina de Tarma
4 shared publications - Julio Cesar Maceda Santivañez
Universidad Nacional Autónoma Altoandina de Tarma
4 shared publications - Larry Oscar Chañi-Paucar
Universidad Nacional Autónoma Altoandina de Tarma
4 shared publications
Latest Publications
- Open Access
Supercritical Fluid Extraction of Bioactive Compounds from Chamomile Leaves Grown in Tarma, Peru
Chamomile flowers are established in the industry due to their therapeutic characteristics. The leaves are an underused fraction of chamomile production that contains phytochemicals with bioactive properties. This work investigated the extraction of chamomile leaves with supercritical CO2 (SC-CO2). The effect of supercritical extraction conditions was evaluated on extraction yield, and the mass transfer process was analyzed by modeling the overall extraction curve (OEC) with empirical and mass balance-based models. Gas chromatography coupled with a mass spectrometer (GC-MS) was used to determine the volatile compounds of the extract. The highest extract yield (1.52 ± 0.01%) was obtained at 300 bar and 45 °C, although similar yields were obtained under conditions of 200 bar/45 °C, 200 bar/35 °C, and 350 bar/35 °C. The 2-straight-line spline promoted the best adjustment to the OEC and described convection as the dominant mass transfer mechanism. The compounds (Z)-2-(Hexa-2,4-diyn-1-ylidene)-1,6-dioxaspiro[4.4]non-3-ene, 2H-1-Benzopyran-2-one,7-methoxy-, cis-beta-Farnesene, alpha-Farnesene, phytol, and (E)-2-(Hepta-2,4-diyn-1-ylidene)-1,6-dioxaspiro[4.4]non-3-ene were the most abundant in the chamomile leaves extracts. SFE extract from chamomile leaves is a promising source of phytochemicals for producing functional products.
Open AccessSupercritical Fluid Extraction of Bioactive Compounds from Chamomile Leaves Grown in Tarma, Peru
Chamomile flowers are established in the industry due to their therapeutic characteristics. The leaves are an underused fraction of chamomile production that contains phytochemicals with bioactive properties. This work investigated the extraction of chamomile leaves with supercritical CO2 (SC-CO2). The effect of supercritical extraction conditions was evaluated on extraction yield, and the mass transfer process was analyzed by modeling the overall extraction curve (OEC) with empirical and mass balance-based models. Gas chromatography coupled with a mass spectrometer (GC-MS) was used to determine the volatile compounds of the extract. The highest extract yield (1.52 ± 0.01%) was obtained at 300 bar and 45 °C, although similar yields were obtained under conditions of 200 bar/45 °C, 200 bar/35 °C, and 350 bar/35 °C. The 2-straight-line spline promoted the best adjustment to the OEC and described convection as the dominant mass transfer mechanism. The compounds (Z)-2-(Hexa-2,4-diyn-1-ylidene)-1,6-dioxaspiro[4.4]non-3-ene, 2H-1-Benzopyran-2-one,7-methoxy-, cis-beta-Farnesene, alpha-Farnesene, phytol, and (E)-2-(Hepta-2,4-diyn-1-ylidene)-1,6-dioxaspiro[4.4]non-3-ene were the most abundant in the chamomile leaves extracts. SFE extract from chamomile leaves is a promising source of phytochemicals for producing functional products.
- Open Access
- 24 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 55
Extraction Kinetics and Composition of Chamomile Flower Extract Obtained by Supercritical CO2
This study aimed to obtain chamomile flower extracts (CFEs) using supercritical CO2 (200 bar and 40 °C) and analyze their composition by GC-MS. A yield of 2.8 ± 0.3% of CFE was obtained after 122.4 min of extraction. The CFE contained several compounds, the most abundant of which were 4-(4-Hydroxy-2,2,6-trimethyl-7-oxabicyclo [4.1.0]hept-1-yl)butan-2-one (12.9%), (Z)-Tonghaosu (11.8%), 6-hydroxydihydrotheaspirane (11.5%), pentacosane (8.1%), cyclohexanethiol, 2,5-dimethylacetate (5.6%), and tetracontane (5.3%). The SFE process for obtaining CFE compounds is a suitable alternative; however, further studies are needed to evaluate this process and the composition of the extract, especially its most volatile fraction.
- 24 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 55
Open AccessExtraction Kinetics and Composition of Chamomile Flower Extract Obtained by Supercritical CO2
This study aimed to obtain chamomile flower extracts (CFEs) using supercritical CO2 (200 bar and 40 °C) and analyze their composition by GC-MS. A yield of 2.8 ± 0.3% of CFE was obtained after 122.4 min of extraction. The CFE contained several compounds, the most abundant of which were 4-(4-Hydroxy-2,2,6-trimethyl-7-oxabicyclo [4.1.0]hept-1-yl)butan-2-one (12.9%), (Z)-Tonghaosu (11.8%), 6-hydroxydihydrotheaspirane (11.5%), pentacosane (8.1%), cyclohexanethiol, 2,5-dimethylacetate (5.6%), and tetracontane (5.3%). The SFE process for obtaining CFE compounds is a suitable alternative; however, further studies are needed to evaluate this process and the composition of the extract, especially its most volatile fraction.
- Open Access
Supercritical Fluid Extraction of Peruvian Schinus molle Leaves: Yield, Kinetics, Mathematical Modeling, and Chemical Composition
According to the literature, Schinus molle (SM) is an important source of bioactive phytochemicals, but the phytochemical content and composition of this species, which grows in high Andean geographic zones such as Tarma (Peru), is not known. In an effort to fill this gap, our work investigated the supercritical carbon dioxide extraction of SM leaves at three temperature levels (35, 45, and 55 °C) and three pressure levels (150, 250, and 350 bar). The results revealed the highest yield of extract at 150 bar, 45 °C, and 3.28 g CO2/min. Under these conditions, the overall extraction curves (OEC) were modeled using the Spline, logistic, and Esquível models, allowing the generation of mass transfer parameters for SFE at the optimized conditions, resulting in a similar correlation with experimental data. Twenty-six compounds were identified in the SFE extract of SM leaves. The most abundant compound classes were sesquiterpenoids (57.17%), sesquiterpenes (24.50%), and triterpenoids (10.48%); of each class, the most abundant compounds were shyobunol (33.60%), bicyclogermacrene (12.68%), and lupeone (6.58%), respectively. The compounds detected possess bioactive properties that support further studies on the application of SFE extracts of SM as a functional ingredient in commercial products.
Open AccessSupercritical Fluid Extraction of Peruvian Schinus molle Leaves: Yield, Kinetics, Mathematical Modeling, and Chemical Composition
According to the literature, Schinus molle (SM) is an important source of bioactive phytochemicals, but the phytochemical content and composition of this species, which grows in high Andean geographic zones such as Tarma (Peru), is not known. In an effort to fill this gap, our work investigated the supercritical carbon dioxide extraction of SM leaves at three temperature levels (35, 45, and 55 °C) and three pressure levels (150, 250, and 350 bar). The results revealed the highest yield of extract at 150 bar, 45 °C, and 3.28 g CO2/min. Under these conditions, the overall extraction curves (OEC) were modeled using the Spline, logistic, and Esquível models, allowing the generation of mass transfer parameters for SFE at the optimized conditions, resulting in a similar correlation with experimental data. Twenty-six compounds were identified in the SFE extract of SM leaves. The most abundant compound classes were sesquiterpenoids (57.17%), sesquiterpenes (24.50%), and triterpenoids (10.48%); of each class, the most abundant compounds were shyobunol (33.60%), bicyclogermacrene (12.68%), and lupeone (6.58%), respectively. The compounds detected possess bioactive properties that support further studies on the application of SFE extracts of SM as a functional ingredient in commercial products.
- Open Access
- 29 June 2025
- Published by Universidad Nacional de Tumbes in Manglar
- Vol. 22 (2) , 245-254
La goma de tara (Caesalpinia spinosa): Un polisacárido con gran potencial en la industria alimentaria y farmacéutica
Instead of synthetic or petroleum-derived materials, current research in the food and pharmaceutical industries has focused on the development of biodegradable and sustainable materials, due to their low toxicity and biocompatibility. In this context, tara gum, a natural water-soluble polysaccharide with easily modifiable hydroxyl groups, is being widely used in drug development and as a food-grade additive for the formulation of edible gels, films and coatings. This systematic review analyses the information available in the Scopus, Scielo and Science Direct databases, following the PRISMA guideline. The results of the bibliometric analysis showed that tara gum polysaccharides can be applied in the packaging of pH-sensitive foods and in the formulation of drugs with biocompatible properties. The non-toxic nature and pseudoplastic rheological properties, as well as the synergistic behavior of tara gum with other polysaccharides make this additive applicable in various industrial fields such as food, cosmetics, textiles and pharmaceuticals. Several studies that modify the properties of tara gum suggest that this polysaccharide can be applied as a stabilizer, thickener, and biocontroller of deterioration in food.
- 29 June 2025
- Published by Universidad Nacional de Tumbes in Manglar
- Vol. 22 (2) , 245-254
Open AccessLa goma de tara (Caesalpinia spinosa): Un polisacárido con gran potencial en la industria alimentaria y farmacéutica
Instead of synthetic or petroleum-derived materials, current research in the food and pharmaceutical industries has focused on the development of biodegradable and sustainable materials, due to their low toxicity and biocompatibility. In this context, tara gum, a natural water-soluble polysaccharide with easily modifiable hydroxyl groups, is being widely used in drug development and as a food-grade additive for the formulation of edible gels, films and coatings. This systematic review analyses the information available in the Scopus, Scielo and Science Direct databases, following the PRISMA guideline. The results of the bibliometric analysis showed that tara gum polysaccharides can be applied in the packaging of pH-sensitive foods and in the formulation of drugs with biocompatible properties. The non-toxic nature and pseudoplastic rheological properties, as well as the synergistic behavior of tara gum with other polysaccharides make this additive applicable in various industrial fields such as food, cosmetics, textiles and pharmaceuticals. Several studies that modify the properties of tara gum suggest that this polysaccharide can be applied as a stabilizer, thickener, and biocontroller of deterioration in food.
- Open Access
- 27 June 2025
- Published by Universidad Nacional Intercultural Fabiola Salazar Leguia de Bagua in Revista Científica Dékamu Agropec
- Vol. 6 (1) , 29-43
Obtención de pectina empleando tecnologías emergentes de extracción verde: Revisión sistemática
La pectina es un biopolímero versátil, que posee una propiedad dual de resistencia y flexibilidad, puede ser extraída de diversas fuentes orgánicas siguiendo metodologías ecológicas. El objetivo de la presente revisión fue identificar las tecnologías emergentes de extracción verde, empleadas para la obtención de pectina, así como analizar la tasa de rendimiento de extracción y los parámetros de operación adecuados para obtener pectinas con mejores características reológicas. Se empleó las bases de datos (Scopus, Scielo y Science Direct), siguiendo las directrices PRISMA y la estrategia PIO (Población, Intervención, Outputs), los cuales facilitaron formular las ecuaciones de búsqueda y a identificar los artículos más relevantes de los últimos 5 años. A través del análisis bibliométrico, se identificaron las tecnologías más prometedoras para la obtención de pectina como el ultrasonido; calentamiento óhmico; CO2 supercrítico; campo eléctrico pulsado; procesamiento de alta presión; radiofrecuencia; microondas y agua subcrítica, las cuales son tecnologías verdes que ofrecen pectinas con grados de esterificación superiores al 50%, clasificándolas como altas en metoxilo. En conclusión, las tecnologías innovadoras promueven una extracción más ecológica en comparación con los métodos tradicionales, ya que implican un menor consumo energético y reducen el uso de solventes tóxicos.
- 27 June 2025
- Published by Universidad Nacional Intercultural Fabiola Salazar Leguia de Bagua in Revista Científica Dékamu Agropec
- Vol. 6 (1) , 29-43
Open AccessObtención de pectina empleando tecnologías emergentes de extracción verde: Revisión sistemática
La pectina es un biopolímero versátil, que posee una propiedad dual de resistencia y flexibilidad, puede ser extraída de diversas fuentes orgánicas siguiendo metodologías ecológicas. El objetivo de la presente revisión fue identificar las tecnologías emergentes de extracción verde, empleadas para la obtención de pectina, así como analizar la tasa de rendimiento de extracción y los parámetros de operación adecuados para obtener pectinas con mejores características reológicas. Se empleó las bases de datos (Scopus, Scielo y Science Direct), siguiendo las directrices PRISMA y la estrategia PIO (Población, Intervención, Outputs), los cuales facilitaron formular las ecuaciones de búsqueda y a identificar los artículos más relevantes de los últimos 5 años. A través del análisis bibliométrico, se identificaron las tecnologías más prometedoras para la obtención de pectina como el ultrasonido; calentamiento óhmico; CO2 supercrítico; campo eléctrico pulsado; procesamiento de alta presión; radiofrecuencia; microondas y agua subcrítica, las cuales son tecnologías verdes que ofrecen pectinas con grados de esterificación superiores al 50%, clasificándolas como altas en metoxilo. En conclusión, las tecnologías innovadoras promueven una extracción más ecológica en comparación con los métodos tradicionales, ya que implican un menor consumo energético y reducen el uso de solventes tóxicos.
- Open Access
- 19 June 2025
- Published by Universidad Nacional Autonoma Altoandina De Tarma in KANYÚ
- Vol. 3 (1) , 11-22
Modificación de las propiedades tecno-funcionales de la harina de habas descascarilladas mediante extrusión termoplástica
Las habas andinas (Vicia faba L.) representan una fuente nutricional subutilizada con potencial para desarrollo de alimentos funcionales sostenibles. Este estudio investigó los efectos de la extrusión termoplástica sobre las propiedades tecno funcionales de harina de habas descascarillada, evaluando su viabilidad como ingrediente alimentario mejorado. Se aplicó extrusión termoplástica a harina de habas y se compararon las características fisicoquímicas, colorimétricas y reológicas con muestras no procesadas mediante análisis estadístico t de Student.La extrusión termoplástica produjo modificaciones significativas en la composición nutricional, reduciendo el contenido proteico (38,11% a 33,74%) y fibra dietaria (5,74% a 4,52%), mientras mantuvo estables los niveles de ceniza y grasa. El procesamiento generó cambios colorimétricos notables, oscureciendo la harina con tendencias rojizas y amarillas más pronunciadas. Las propiedades reológicas experimentaron mejoras sustanciales, evidenciadas por la reducción del esfuerzo de fluencia (52,64 a 21,97 Pa), índice de consistencia (507,97 a 359,82 Pa·sⁿ), y parámetros viscoelásticos, manteniendo el comportamiento pseudoplástico (p<0,05).Los resultados demuestran que la extrusión termoplástica mejora significativamente las propiedades tecno funciónales de la harina de habas, generando un ingrediente con mayor versatilidad aplicativa para la industria alimentaria. Este procesamiento ofrece una estrategia viable para valorizar leguminosas andinas en el desarrollo de productos alimentarios funcionales y sostenibles.
- 19 June 2025
- Published by Universidad Nacional Autonoma Altoandina De Tarma in KANYÚ
- Vol. 3 (1) , 11-22
Open AccessModificación de las propiedades tecno-funcionales de la harina de habas descascarilladas mediante extrusión termoplástica
Las habas andinas (Vicia faba L.) representan una fuente nutricional subutilizada con potencial para desarrollo de alimentos funcionales sostenibles. Este estudio investigó los efectos de la extrusión termoplástica sobre las propiedades tecno funcionales de harina de habas descascarillada, evaluando su viabilidad como ingrediente alimentario mejorado. Se aplicó extrusión termoplástica a harina de habas y se compararon las características fisicoquímicas, colorimétricas y reológicas con muestras no procesadas mediante análisis estadístico t de Student.La extrusión termoplástica produjo modificaciones significativas en la composición nutricional, reduciendo el contenido proteico (38,11% a 33,74%) y fibra dietaria (5,74% a 4,52%), mientras mantuvo estables los niveles de ceniza y grasa. El procesamiento generó cambios colorimétricos notables, oscureciendo la harina con tendencias rojizas y amarillas más pronunciadas. Las propiedades reológicas experimentaron mejoras sustanciales, evidenciadas por la reducción del esfuerzo de fluencia (52,64 a 21,97 Pa), índice de consistencia (507,97 a 359,82 Pa·sⁿ), y parámetros viscoelásticos, manteniendo el comportamiento pseudoplástico (p<0,05).Los resultados demuestran que la extrusión termoplástica mejora significativamente las propiedades tecno funciónales de la harina de habas, generando un ingrediente con mayor versatilidad aplicativa para la industria alimentaria. Este procesamiento ofrece una estrategia viable para valorizar leguminosas andinas en el desarrollo de productos alimentarios funcionales y sostenibles.
- Open Access
Valorization of Andean Native Potatoes Through Chuño Processing: Effects of Potato Variety and Freezing Temperature on Physicochemical, Bioactive, Nutritional, and Technological Properties
Chuño is a traditional Andean product obtained by freezing, thawing, and drying potatoes. This study aimed to assess how different Andean potato varieties (Chihuanki Negro [C], Puka Huayro Machu [P], and Yana Huayro Machu [Y]) and freezing temperatures (−10 °C, −20 °C, and −30 °C) modulate the physicochemical (pH, acidity, and moisture), bioactive (phenolics and antioxidant activity), nutritional (proximate composition and minerals), and techno-functional (water absorption and swelling power) attributes of chuño. The results revealed that variety C retained higher macronutrient levels at 10 °C, featuring higher carbohydrates, proteins, and minerals (e.g., magnesium and zinc), while P showed enhanced fiber and mineral retention, alongside a faster rehydration and antioxidant capacity, particularly at −20 °C and −30 °C. Color differences were also noted, with P presenting reddish tones and a higher luminosity, whereas C had a more intense yellow hue linked to carotenoids. In general, −10 °C and −20 °C better preserved antioxidant compounds than −30 °C. These findings underscore how the proper selection of potato variety and freezing temperature can optimize the nutritional, functional, and sensory characteristics of chuño. However, these outcomes stem from selected samples, suggesting that further research is needed to confirm the broader applicability of the proposed method across additional varieties and process conditions.
Open AccessValorization of Andean Native Potatoes Through Chuño Processing: Effects of Potato Variety and Freezing Temperature on Physicochemical, Bioactive, Nutritional, and Technological Properties
Chuño is a traditional Andean product obtained by freezing, thawing, and drying potatoes. This study aimed to assess how different Andean potato varieties (Chihuanki Negro [C], Puka Huayro Machu [P], and Yana Huayro Machu [Y]) and freezing temperatures (−10 °C, −20 °C, and −30 °C) modulate the physicochemical (pH, acidity, and moisture), bioactive (phenolics and antioxidant activity), nutritional (proximate composition and minerals), and techno-functional (water absorption and swelling power) attributes of chuño. The results revealed that variety C retained higher macronutrient levels at 10 °C, featuring higher carbohydrates, proteins, and minerals (e.g., magnesium and zinc), while P showed enhanced fiber and mineral retention, alongside a faster rehydration and antioxidant capacity, particularly at −20 °C and −30 °C. Color differences were also noted, with P presenting reddish tones and a higher luminosity, whereas C had a more intense yellow hue linked to carotenoids. In general, −10 °C and −20 °C better preserved antioxidant compounds than −30 °C. These findings underscore how the proper selection of potato variety and freezing temperature can optimize the nutritional, functional, and sensory characteristics of chuño. However, these outcomes stem from selected samples, suggesting that further research is needed to confirm the broader applicability of the proposed method across additional varieties and process conditions.
- Open Access
Supercritical Fluid Extraction of Amazonian Oils and Fats: Promising Species, Equipment, Yields, Composition, and Potential Uses
Amazonian oils and fats (AOFs) have promising composition and bioactive properties, and their processing with supercritical fluids presents several opportunities and challenges for the industry. Our review is dedicated to unraveling the advances in the application of supercritical fluid extraction (SFE) to produce these exceptional oils and fats from Amazonian raw materials, such as fruits, pulps, seeds, and industrial by-products. Our review found that Amazonian plant species produce lipid-rich raw materials and also grow naturally in other regions with similar climates. AOFs present high nutritional value and functional properties due to their content of bioactive compounds. The properties of AOFs are attributed to their major and minor components; lipid molecules represent the major fraction and some fat-soluble compounds, such as tocopherols, phytosterols, terpenes and others, constitute the minor fraction. The production of AOFs by SFE requires properly prepared raw materials and process optimization. Several scientific articles report on the production of AOFs by SFE, but application studies in product development are still scarce. The composition and technological properties of AOFs show a wide spectrum of opportunities for the development of nutritional and functional products. Aspects such as the scaling up of the SFE process, agroforestry or agronomic production, and product development require further studies to promote the AOFs industry in a way that contributes to sustainable development, food security, and the quality of life and health of the Amazonian populations.
Open AccessSupercritical Fluid Extraction of Amazonian Oils and Fats: Promising Species, Equipment, Yields, Composition, and Potential Uses
Amazonian oils and fats (AOFs) have promising composition and bioactive properties, and their processing with supercritical fluids presents several opportunities and challenges for the industry. Our review is dedicated to unraveling the advances in the application of supercritical fluid extraction (SFE) to produce these exceptional oils and fats from Amazonian raw materials, such as fruits, pulps, seeds, and industrial by-products. Our review found that Amazonian plant species produce lipid-rich raw materials and also grow naturally in other regions with similar climates. AOFs present high nutritional value and functional properties due to their content of bioactive compounds. The properties of AOFs are attributed to their major and minor components; lipid molecules represent the major fraction and some fat-soluble compounds, such as tocopherols, phytosterols, terpenes and others, constitute the minor fraction. The production of AOFs by SFE requires properly prepared raw materials and process optimization. Several scientific articles report on the production of AOFs by SFE, but application studies in product development are still scarce. The composition and technological properties of AOFs show a wide spectrum of opportunities for the development of nutritional and functional products. Aspects such as the scaling up of the SFE process, agroforestry or agronomic production, and product development require further studies to promote the AOFs industry in a way that contributes to sustainable development, food security, and the quality of life and health of the Amazonian populations.
- Open Access
Optimization of 3D Extrusion Printing Parameters for Raw and Extruded Dehulled Andean Fava Bean Flours Using Response Surface Methodology (RSM)
This study optimizes the 3D extrusion printing parameters—water-to-flour ratio (X1), temperature (X2), and printing speed (X3)—for raw (RFB) and extruded (EFB) dehulled Andean fava bean flours to maximize print quality and minimize structural defects. A 23 central composite design combined with response surface methodology (RSM) was used to identify the optimal conditions for achieving geometric precision, surface homogeneity, and textural stability. Physicochemical analyses showed that extrusion cooking substantially modified the composition and rheology of the flour. Compared with RFB, EFB exhibited lower protein and fiber contents, a higher proportion of digestible carbohydrates, and reduced rheological parameters (τ0, K, G′, G″), which facilitated printing. The evaluation of different parameter combinations revealed notable differences between the two flours, with X1 and X2 exerting the greatest influence on print quality. For RFB, the highest desirability (0.853) was achieved at X1 = 0.806, X2 = 23.18 °C, and X3 = 2470.5 mm/min, yielding more uniform and firmer printed structures. In contrast, EFB reached a desirability of 0.844 at X1 = 1.66 °C, X2 = 56.82 °C, and X3 = 1505.43 mm/min, indicating its outstanding geometric accuracy and robustness. In conclusion, raw flour requires higher hydration and lower temperatures to prevent excessive viscosity. In contrast, extruded flour benefits from low water and high temperatures to achieve stable structures and firm textures. These findings demonstrate the feasibility of using Andean fava bean flour in 3D food printing to create nutrient-dense, functional foods with improved printability. This work offers practical applications for developing personalized foods—such as customized meals for individuals with specific dietary requirements—while contributing to sustainable and secure food production. Future research should address long-term storage, post-printing drying methods, and scaling production.
Open AccessOptimization of 3D Extrusion Printing Parameters for Raw and Extruded Dehulled Andean Fava Bean Flours Using Response Surface Methodology (RSM)
This study optimizes the 3D extrusion printing parameters—water-to-flour ratio (X1), temperature (X2), and printing speed (X3)—for raw (RFB) and extruded (EFB) dehulled Andean fava bean flours to maximize print quality and minimize structural defects. A 23 central composite design combined with response surface methodology (RSM) was used to identify the optimal conditions for achieving geometric precision, surface homogeneity, and textural stability. Physicochemical analyses showed that extrusion cooking substantially modified the composition and rheology of the flour. Compared with RFB, EFB exhibited lower protein and fiber contents, a higher proportion of digestible carbohydrates, and reduced rheological parameters (τ0, K, G′, G″), which facilitated printing. The evaluation of different parameter combinations revealed notable differences between the two flours, with X1 and X2 exerting the greatest influence on print quality. For RFB, the highest desirability (0.853) was achieved at X1 = 0.806, X2 = 23.18 °C, and X3 = 2470.5 mm/min, yielding more uniform and firmer printed structures. In contrast, EFB reached a desirability of 0.844 at X1 = 1.66 °C, X2 = 56.82 °C, and X3 = 1505.43 mm/min, indicating its outstanding geometric accuracy and robustness. In conclusion, raw flour requires higher hydration and lower temperatures to prevent excessive viscosity. In contrast, extruded flour benefits from low water and high temperatures to achieve stable structures and firm textures. These findings demonstrate the feasibility of using Andean fava bean flour in 3D food printing to create nutrient-dense, functional foods with improved printability. This work offers practical applications for developing personalized foods—such as customized meals for individuals with specific dietary requirements—while contributing to sustainable and secure food production. Future research should address long-term storage, post-printing drying methods, and scaling production.
- Open Access
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Effect of thermoplastic extrusion on the techno-functional characteristics of husked fava bean meal
The Andean fava beans are of particular interest due to their nutritional properties, which, with the addition of thermoplastic extrusion, make them a sustainable techno-functional alternative. Since these effects are still underexplored, this article aims to analyze the effects of extrusion on the techno-functional characteristics of dehulled broad bean flour. To achieve this, physicochemical, color, and rheological analyses were conducted, comparing their means using Student's t-test. The results indicate that thermoplastic extrusion significantly reduces protein content (from 38.11±1.11 to 33.74±1.95) and dietary fiber (from 5.74±0.19 to 4.52±0.17), while ash (from 1.03±0.05 to 1.03±0.02) and fat (from 2.14±0.04 to 2.06±0.08) remained relatively constant. The color darkened slightly (from 95.10±0.06 to 83.5±0.09), with a reddish (from 0.057±0.01 to 3.81±0.08) and yellowish (from 6.57±0.79 to 23.58±0.06) tendency. The rheological behavior of broad bean flour showed a reduction in yield stress parameters (from 52.64±3.94 Pa to 21.97±1.94 Pa), consistency index (from 507.97±39.45 Pa•sⁿ to 359.82±29.65 Pa•sⁿ), elasticity (from 30,417.91±431.12 Pa to 23,969.48±319.48 Pa), viscosity (from 21,777.93±314.15 Pa to 15,679.52±214.56 Pa), damping (from 0.72±0.03 to 0.65±0.02), and pseudoplastic behavior (p<0.05)..
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Open AccessEffect of thermoplastic extrusion on the techno-functional characteristics of husked fava bean meal
The Andean fava beans are of particular interest due to their nutritional properties, which, with the addition of thermoplastic extrusion, make them a sustainable techno-functional alternative. Since these effects are still underexplored, this article aims to analyze the effects of extrusion on the techno-functional characteristics of dehulled broad bean flour. To achieve this, physicochemical, color, and rheological analyses were conducted, comparing their means using Student's t-test. The results indicate that thermoplastic extrusion significantly reduces protein content (from 38.11±1.11 to 33.74±1.95) and dietary fiber (from 5.74±0.19 to 4.52±0.17), while ash (from 1.03±0.05 to 1.03±0.02) and fat (from 2.14±0.04 to 2.06±0.08) remained relatively constant. The color darkened slightly (from 95.10±0.06 to 83.5±0.09), with a reddish (from 0.057±0.01 to 3.81±0.08) and yellowish (from 6.57±0.79 to 23.58±0.06) tendency. The rheological behavior of broad bean flour showed a reduction in yield stress parameters (from 52.64±3.94 Pa to 21.97±1.94 Pa), consistency index (from 507.97±39.45 Pa•sⁿ to 359.82±29.65 Pa•sⁿ), elasticity (from 30,417.91±431.12 Pa to 23,969.48±319.48 Pa), viscosity (from 21,777.93±314.15 Pa to 15,679.52±214.56 Pa), damping (from 0.72±0.03 to 0.65±0.02), and pseudoplastic behavior (p<0.05)..