Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bo Shang has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Two Artificial Leaf Architectures for Solar Formate Production From CO 2 and H 2 O

    by Kunpeng Yu, Bo Shang, Qi Sun, Yuanzuo Gao, Longtao Ren, Samuel Schaefer, Jindou Yang, Cristina Decavoli, Gary W. Brudvig, Hailiang Wang

    Sunlight‐powered artificial leaves for the production of formate from CO 2 are an attractive route to solar fuels, yet existing solar formate devices remain low in performance, and their architecture and material choices are underexplored. Herein, we report the fabrication of two distinct fully integrated, self‐standing solar formate device architectures and elucidate the underlying design principles and material selection strategies. The first architecture integrates a Si photocathode with a BiVO 4 photoanode and utilizes a highly active Pd catalyst for CO 2 reduction. It represents the first artificial leaf device comprising two photoelectrodes (excluding photovoltaic [PV]‐biased electrodes) for effective formate production under single‐beam illumination. The second architecture employs a dark cathode and a dark anode driven by a 4‐junction perovskite solar cell and uses a highly stable Bi catalyst for CO 2 reduction. This device delivers a record‐high formate production rate of 174 µmol h −1 with a remarkable solar‐to‐formate energy efficiency of 2% among all artificial leaf devices reported to date. These results demonstrate the feasibility and outline the design principles of both PV‐free and PV‐assisted device architectures in solar fuel production.

  • Two Artificial Leaf Architectures for Solar Formate Production From CO 2 and H 2 O

    by Kunpeng Yu, Bo Shang, Qi Sun, Yuanzuo Gao, Longtao Ren, Samuel Schaefer, Jindou Yang, Cristina Decavoli, Gary W. Brudvig, Hailiang Wang

    Sunlight‐powered artificial leaves for the production of formate from CO 2 are an attractive route to solar fuels, yet existing solar formate devices remain low in performance, and their architecture and material choices are underexplored. Herein, we report the fabrication of two distinct fully integrated, self‐standing solar formate device architectures and elucidate the underlying design principles and material selection strategies. The first architecture integrates a Si photocathode with a BiVO 4 photoanode and utilizes a highly active Pd catalyst for CO 2 reduction. It represents the first artificial leaf device comprising two photoelectrodes (excluding photovoltaic [PV]‐biased electrodes) for effective formate production under single‐beam illumination. The second architecture employs a dark cathode and a dark anode driven by a 4‐junction perovskite solar cell and uses a highly stable Bi catalyst for CO 2 reduction. This device delivers a record‐high formate production rate of 174 µmol h −1 with a remarkable solar‐to‐formate energy efficiency of 2% among all artificial leaf devices reported to date. These results demonstrate the feasibility and outline the design principles of both PV‐free and PV‐assisted device architectures in solar fuel production.

  • A Monolithic Artificial Leaf for Solar Methanol Production from CO 2 and H 2 O

    by Bo Shang, Kunpeng Yu, Hannah R. M. Margavio, Haozhou Yang, Yuanzuo Gao, Jindou Yang, Jing Li, Min Li, Jinquan Shi, Mengxia Liu, et al.

    Methanol, an important liquid fuel and chemical feedstock, has yet to be produced using solar energy, H2O, and CO2 as sole inputs in a standalone device. This study directly addresses this longstanding challenge through presenting the first demonstration of unbiased solar methanol production from CO2 and H2O with a monolithic artificial leaf design, surpassing the previous best energy efficiency in solar alcohol production by at least 1 order of magnitude. We first develop a new generation of photocathodes based on Si micropillar arrays and a cobalt tetraaminophthalocyanine molecular catalyst. By integrating a C60 interlayer that facilitates unidirectional electron transfer through the semiconductor/catalyst interface, we realize a photovoltage of 500 mV, one of the highest recorded for single-junction Si-based photoelectrodes in aqueous CO2 reduction, as well as unprecedented methanol formation with a Faradaic efficiency of 30% and a partial current density of 6.3 mA cm-2. We further integrate the photocathode with a multijunction perovskite photovoltaic minimodule to afford a standalone solar fuel system, which demonstrates a light-to-methanol conversion efficiency of 0.8%, 32 times higher than the present record in light-to-alcohol conversion with an artificial leaf.


  • Open Access

    Reaction Diffusion Modelling of 3D Pillar Electrodes in Single-Catalyst CO2 Reduction Cascades

    by Pablo Fernandez, Marisé García-Batlle, Bo Shang, Hailiang Wang, Gregory N. Parsons, James F. Cahoon, Rene Lopez

    Effective electrochemical CO2 reduction to liquid fuels requires that the local catalytic environment facilitates the desired reactivity, yet a microscopic understanding of this environment is difficult to achieve from experiment alone. In this work, a 3D reaction-diffusion model was developed to explore the effects of electrode surface area and local geometry on the performance of a heterogeneous catalyst that performs a two-step CO2 reduction cascade reaction to CO and then CH3OH under aqueous conditions. Kinetic parameters for the model were inspired by experimental results using a cobalt phthalocyanine (CoPc) catalyst. Three-dimensional architectures composed of arrays of square pillars with varying dimensions and either smooth or periodically modulated surfaces were tested, revealing the extent to which geometry modulates the performance of the cascade reactions. Although structural variations modulate local concentration gradients, we find that electrochemically active surface area predominantly governs the overall cascade reaction. Moreover, the results suggest that supersaturation of CO, with concentrations up to ten-fold higher than the equilibrium solubility limit, might be critical for more efficient conversion to CH3OH. For any given geometry, the spatially averaged ratio of [CO] to [CO2] is dictated by the electrochemically active surface area and determines the yield of CH3OH. For a fixed surface area, geometries that spatially confine the electrolyte yield moderate local [CO] to [CO2] ratios within small volumes. In contrast, less confining geometries result in a broader distribution of local ratios spread over larger volumes, with both configurations yielding the same spatially averaged [CO] to [CO2] ratio. These insights provide valuable design principles—highlighting the critical importance of surface area and possibly CO supersaturation—for engineering advanced electrode architectures that leverage intermediate trapping and CO supersaturation to enhance overall performance in tandem CO2 reduction systems.


  • Metal/Oxide Interface Enabling Selective Electrocatalytic Reduction of Oxime to Amine in Neutral Electrolyte

    by Qi Sun, Jing Li, Bo Shang, Kunpeng Yu, Yuanzuo Gao, Nia J. Harmon, Conor L. Rooney, Hailiang Wang

    Electrochemical reduction of oximes promises a sustainable route for amine synthesis but is currently limited by the lack of mild electrolyte and low-cost catalyst systems. Here, we for the first time report selective electroreduction of a series of oximes to their corresponding amines in a pH-neutral aqueous electrolyte enabled by a Pb-PbO catalyst. Taking acetoxime as a model reactant, we find that the coexistence of Pb and PbO phases in the catalyst structure is essential for the high Faradaic efficiency and near-unity product selectivity for isopropylamine. Mechanistic studies reveal that the reduction starts with a rate-determining proton-coupled electron transfer step and proceeds through 2-propanimine as an intermediate. The same electrocatalyst also demonstrates high selectivity for other structurally diverse oxime reactants. These findings highlight the critical role of the metal/oxide interface in promoting selective and generalizable electrosynthesis of amines from oximes under mild conditions.


  • Open Access

    The importance of CO supersaturation and surface area—not geometry—for tandem single-catalyst CO₂ reduction to CH₃OH

    by Pablo Fernandez, Marisé García-Batlle, Bo Shang, Hailiang Wang, Gregory N. Parsons, James F. Cahoon, Rene Lopez

    Effective electrochemical CO2 reduction to liquid fuels requires that the local catalytic environment facilitates the desired reactivity, yet a microscopic understanding of this environment is difficult to achieve from experiment alone. In this work, a 3D reaction-diffusion model was developed to explore the effects of electrode surface area and local geometry on the performance of a heterogeneous catalyst that performs a two-step CO2 reduction cascade reaction to CO and then methanol under aqueous conditions. Kinetic parameters for the model were directly motivated by experimental results that used carbon electrodes functionalized with cobalt phthalocyanine (CoPc) catalysts. 3D architectures composed of arrays of square pillars with varying dimensions and either smooth or periodically modulated surfaces were tested, revealing the extent to which geometry modulates the performance of the cascade reactions. Surprisingly, the model illustrates that electrochemically-active surface area, regardless of electrode geometry, is the primary factor dictating the overall cascade reaction yield. Moreover, the results suggest that supersaturation of CO, with concentrations up to ten-fold higher than the equilibrium solubility limit, is critical for more efficient conversion to methanol. For any given geometry, the spatially averaged ratio of [CO] to [CO₂] is dictated by the electrochemically active surface area and determines the yield of methanol. For a fixed surface area, geometries that spatially confine the electrolyte yield moderate local [CO] to [CO₂] ratios within small volumes. In contrast, less confining geometries result in a broader distribution of local ratios spread over larger volumes with both configurations yielding the same spatially averaged [CO] to [CO₂] ratio. These insights provide valuable design principles—highlighting the critical importance of surface area and CO supersaturation—for engineering advanced electrode architectures that leverage intermediate trapping and CO supersaturation to enhance overall performance in tandem CO₂ reduction systems.

  • Electrocatalytic Reductive Amination of Aldehydes and Ketones with Aqueous Nitrite

    by Conor L. Rooney, Qi Sun, Bo Shang, Hailiang Wang

    The electrocatalytic utilization of oxidized nitrogen waste for C-N coupling chemistry is an exciting research area with great potential to be adopted as a sustainable method for generation of organonitrogen molecules. The most widely used C-N coupling reaction is reductive amination. In this work, we develop an alternative electrochemical reductive amination reaction that can proceed in neutral aqueous electrolyte with nitrite as the nitrogenous reactant and via an oxime intermediate. We develop a selection criterion for nitrite reduction electrocatalysts suited for oxime electrosynthesis and, in doing so, find Pd to be a highly efficient catalyst for this reaction, reaching an oxime Faradaic efficiency of 82% at -0.21 V vs the reversible hydrogen electrode. The aliphatic or aromatic structure of the carbonyl reactant impacts the efficacy of the catalyst, with aromatic substrates leading to suppressed oxime formation and detrimental reduction of the carbonyl to the alcohol. We developed a Pb/PbO electrocatalyst that selectively performs oxime reduction in the neutral aqueous electrolyte. With acetone as a model substrate, we demonstrate an efficient one-pot, two-step electrochemical reaction for the conversion of acetone to isopropyl amine with 85% yield and 50% global Faradaic efficiency.


  • Top Cited Papers

    Molecular-scale CO spillover on a dual-site electrocatalyst enhances methanol production from CO2 reduction

    by Jing Li, Quansong Zhu, Alvin Chang, Seonjeong Cheon, Yuanzuo Gao, Bo Shang, Huan Li, Conor L. Rooney, Longtao Ren, Zhan Jiang, et al.

    Cobalt phthalocyanine (CoPc) is recognized for catalysing electrochemical CO2 reduction into methanol at high Faradaic efficiency but is subject to deactivation. Cobalt tetraaminophthalocyanine (CoPc-NH2) shows improved stability, but its methanol Faradaic efficiency is below 30%. This study addresses these limitations in selectivity, reactivity and stability by rationally designing a dual-site cascade catalyst. Here we quantify the local concentration of CO, a key intermediate of the reaction, near a working CoPc-NH2 catalyst and show that co-loading nickel tetramethoxyphthalocyanine (NiPc-OCH3) with CoPc-NH2 on multiwalled carbon nanotubes increases the generation and local concentration of CO. This dual-site cascade catalyst exhibits substantially higher performance than the original single-site CoPc-NH2/carbon nanotube catalyst, reaching a partial current density of 150 mA cm−2 and a Faradaic efficiency of 50% for methanol production. Kinetic analysis and in situ sum-frequency generation vibrational spectroscopy attribute this notable performance improvement to molecular-scale CO spillover from NiPc-OCH3 sites to methanol-active CoPc-NH2 sites.


  • Simple Framework for Simultaneous Analysis of Both Electrodes in Stoichiometric Lithium–Sulfur Batteries

    by Shuting Fu, Hongmin Wang, Samuel Schaefer, Bo Shang, Longtao Ren, Wanyu Zhang, Mingmei Wu, Hailiang Wang

    A battery is composed of two electrodes that depend on and interact with each other. However, galvanostatic charging-discharging measurement, the most widely used method for battery evaluation, cannot simultaneously reflect performance metrics [capacity, Coulombic efficiency (CE), and cycling stability] of both electrodes because the result is generally governed by the lower-capacity electrode of the cell, namely the limiting reagent of the battery reaction. In studying stoichiometric Li-S cells operating under application-relevant high-mass-loading and lean-electrolyte conditions, we take advantage of the two-stage discharging behavior of sulfur to construct a simple framework that allows us to analyze both electrodes simultaneously. The cell capacity and its decay are anode performance descriptors, whereas the first plateau capacity and cell CE are cathode performance descriptors. Our analysis within this frame identifies Li stripping/plating and polysulfide shuttling to be the limiting factors for the cycling performance of the stoichiometric Li-S cell. Using our newly developed framework, we examine various previously reported strategies to mitigate these bottleneck problems and find modifying the separator with a reduced graphene oxide layer to be an effective means, which improves the capacity retention rate of the cell to 99.7% per cycle.


  • Tailoring Interfaces for Enhanced Methanol Production from Photoelectrochemical CO2 Reduction

    by Bo Shang, Fengyi Zhao, Sa Suo, Yuanzuo Gao, Colton Sheehan, Sungho Jeon, Jing Li, Conor L. Rooney, Oliver Leitner, Langqiu Xiao, et al.

    Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.