Sungey Naynee Sánchez Llaguno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sungey Naynee Sánchez Llaguno has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Juan Alejandro Neira Mosquera
Department of Industrial and Production Sciences, State Technical University of Quevedo, Quevedo, Ecuador
6 shared publications - Karol Yannela Revilla Escobar
Pontificia Universidad Católica del Ecuador
5 shared publications - Jhonnatan Placido Aldas Morejon
Universidad Nacional de Cuyo
4 shared publications - Jhoan Alfredo Plua Montiel
Universidad de las Fuerzas Armadas ESPE
2 shared publications - Alberto Renato Inca-Torres
Universidad de las Fuerzas Armadas, Department of Life and Agricultural Sciences. Quito, Ecuador
1 shared publication - Anabell Del Rocío Urbina-Salazar
Universidad de las Fuerzas Armadas, Department of Life and Agricultural Sciences. Quito, Ecuador
1 shared publication
Latest Publications
- Open Access
- 10 April 2026
- Published by Enviro Research Publishers in Current Research in Nutrition and Food Science Journal
- Vol. 1 (14) , 313-323
Effect of UV Radiation on Ergosterol Synthesis in Agaricus bisporus and its Hepatoprotective Potential
Vitamin D deficiency is a widespread public health issue linked to increased risk of autoimmune diseases. This study explored the use of mushroom stem flour, a by-product of the mushroom industry, as a functional ingredient enriched with ergosterol, a vitamin D2 precursor, and evaluated its safety and therapeutic potential. Different UV irradiation methods (UVA, UVB, and UVC) were applied to optimize ergosterol production, considering environmental variables such as exposure time, temperature, and humidity. UVB300 irradiation led to a 70% increase in ergosterol concentration compared to natural sunlight exposure (4.52 ± 0.1 µg/g p.s. vs. 2.9 ± 0.4 µg/g p.s., p<0.05), with peak levels (23.07 ± 2.14 µg/g p.s.) observed at 30 °C and 76.3% humidity. Safety was confirmed through acute and subchronic toxicity studies in rats receiving daily oral doses of 5,000 mg/kg body weight, showing no adverse clinical, biochemical, or behavioral effects over 8 weeks. In a liver injury model, supplementation with the enriched product significantly reduced ALT levels (from 6700 ± 200 UI in the control group to 2900 ± 170 UI in the UVB-treated group) and lowered the incidence of severe liver damage from 82% ± 5% to 38% ± 4%. Statistical analysis was performed using one-way ANOVA followed by Fisher’s protected LSD test (SPSS for Windows, version 10), with significance set at p<0.0533. These findings demonstrate that UVB-irradiated mushroom stem flour is a safe, natural source of vitamin D2 with notable hepatoprotective and immunomodulatory effects, supporting its potential application as a functional supplement for immune and liver health.
- 10 April 2026
- Published by Enviro Research Publishers in Current Research in Nutrition and Food Science Journal
- Vol. 1 (14) , 313-323
Open AccessEffect of UV Radiation on Ergosterol Synthesis in Agaricus bisporus and its Hepatoprotective Potential
Vitamin D deficiency is a widespread public health issue linked to increased risk of autoimmune diseases. This study explored the use of mushroom stem flour, a by-product of the mushroom industry, as a functional ingredient enriched with ergosterol, a vitamin D2 precursor, and evaluated its safety and therapeutic potential. Different UV irradiation methods (UVA, UVB, and UVC) were applied to optimize ergosterol production, considering environmental variables such as exposure time, temperature, and humidity. UVB300 irradiation led to a 70% increase in ergosterol concentration compared to natural sunlight exposure (4.52 ± 0.1 µg/g p.s. vs. 2.9 ± 0.4 µg/g p.s., p<0.05), with peak levels (23.07 ± 2.14 µg/g p.s.) observed at 30 °C and 76.3% humidity. Safety was confirmed through acute and subchronic toxicity studies in rats receiving daily oral doses of 5,000 mg/kg body weight, showing no adverse clinical, biochemical, or behavioral effects over 8 weeks. In a liver injury model, supplementation with the enriched product significantly reduced ALT levels (from 6700 ± 200 UI in the control group to 2900 ± 170 UI in the UVB-treated group) and lowered the incidence of severe liver damage from 82% ± 5% to 38% ± 4%. Statistical analysis was performed using one-way ANOVA followed by Fisher’s protected LSD test (SPSS for Windows, version 10), with significance set at p<0.0533. These findings demonstrate that UVB-irradiated mushroom stem flour is a safe, natural source of vitamin D2 with notable hepatoprotective and immunomodulatory effects, supporting its potential application as a functional supplement for immune and liver health.
- Open Access
- 2 March 2026
- Published by Universidad de la República, Facultad de Agronomía in Agrociencia Uruguay
- Vol. 30, e1781
Optimization of the Arapaima gigas Meat Product Manufacturing Process Using Probiotic Lactic Acid Bacteria
Compounds derived from microorganisms have considerable potential in fish preservation. Among them, lactic acid bacteria (LAB) are widely studied because they dominate the natural microflora of many foods and produce antimicrobial metabolites. Accordingly, this research aimed to optimize the processing of Arapaima gigas meat products through the application of probiotic LAB. Significant differences (p28%), and protein predominated in fresh/raw products, reaching 19.89% with L. reuteri. Microbiologically, treatment T1 (fresh/raw + L. plantarum) showed 65 CFU/g of total cocci and low enterobacteria counts (10 CFU/g), with no detection of Escherichia coli, Salmonella spp., molds, or yeasts. In treatments T6 (mojama + L. reuteri) and T8 (canned + L. mesenteroides) no microbial growth was detected. Overall, probiotic LAB combined with appropriate processing improved microbial safety and contributed to the nutritional stability of A. gigas products.
- 2 March 2026
- Published by Universidad de la República, Facultad de Agronomía in Agrociencia Uruguay
- Vol. 30, e1781
Open AccessOptimization of the Arapaima gigas Meat Product Manufacturing Process Using Probiotic Lactic Acid Bacteria
Compounds derived from microorganisms have considerable potential in fish preservation. Among them, lactic acid bacteria (LAB) are widely studied because they dominate the natural microflora of many foods and produce antimicrobial metabolites. Accordingly, this research aimed to optimize the processing of Arapaima gigas meat products through the application of probiotic LAB. Significant differences (p28%), and protein predominated in fresh/raw products, reaching 19.89% with L. reuteri. Microbiologically, treatment T1 (fresh/raw + L. plantarum) showed 65 CFU/g of total cocci and low enterobacteria counts (10 CFU/g), with no detection of Escherichia coli, Salmonella spp., molds, or yeasts. In treatments T6 (mojama + L. reuteri) and T8 (canned + L. mesenteroides) no microbial growth was detected. Overall, probiotic LAB combined with appropriate processing improved microbial safety and contributed to the nutritional stability of A. gigas products.
- Open Access
- 30 December 2025
- Published by Instituto de Investigaciones de la Amazonia Peruana - IIAP in Folia Amazónica
- Vol. 34 (2) , e34841
PHYSICOCHEMICAL CHARACTERIZATION OF PEANUT OIL (Arachis hypogaea L.) CONSIDERING DIFFERENT GENETIC VARIETIES AND EXTRACTION METHODS
This study compared the physicochemical characteristics of peanut oil considering different varieties and extraction methods. A factorial experimental design was used with factors A (peanut varieties: INIAP 380 Negra, INIAP 381 Rosa, and INIAP 382 Caramelo) and B (extraction methods: Soxhlet, hot pressing, and cold pressing). The Soxhlet method yielded the highest percentage (37.33%). The INIAP 380 (Negra) variety, extracted using Soxhlet, showed the best quality in terms of acidity (0.34%), ash (0.16–0.27%), impurities (0.01%), and peroxide value (3.00 meqO₂/kg). No significant differences were found in pH (3.58–4.55) or density (0.91–0.92 g/cm³) among the study factors. Regarding chemical properties, cold and hot-pressing methods stood out in saponification value (190.61 and 190.27 mg KOH/g, respectively) and acid value (14.99 and 11.63 mg/g). The INIAP 381 (Pink) variety, obtained using Soxhlet extraction, presented the highest iodine value (114.28 cg/g) and a cyanide content of 0.76 ppm. In conclusion, the INIAP 380 (Black) variety, extracted using Soxhlet extraction, showed the best yield and oil quality, while the pressing methods favored higher saponification values, demonstrating the influence of the variety and extraction method on the physicochemical properties of peanut oil.
- 30 December 2025
- Published by Instituto de Investigaciones de la Amazonia Peruana - IIAP in Folia Amazónica
- Vol. 34 (2) , e34841
Open AccessPHYSICOCHEMICAL CHARACTERIZATION OF PEANUT OIL (Arachis hypogaea L.) CONSIDERING DIFFERENT GENETIC VARIETIES AND EXTRACTION METHODS
This study compared the physicochemical characteristics of peanut oil considering different varieties and extraction methods. A factorial experimental design was used with factors A (peanut varieties: INIAP 380 Negra, INIAP 381 Rosa, and INIAP 382 Caramelo) and B (extraction methods: Soxhlet, hot pressing, and cold pressing). The Soxhlet method yielded the highest percentage (37.33%). The INIAP 380 (Negra) variety, extracted using Soxhlet, showed the best quality in terms of acidity (0.34%), ash (0.16–0.27%), impurities (0.01%), and peroxide value (3.00 meqO₂/kg). No significant differences were found in pH (3.58–4.55) or density (0.91–0.92 g/cm³) among the study factors. Regarding chemical properties, cold and hot-pressing methods stood out in saponification value (190.61 and 190.27 mg KOH/g, respectively) and acid value (14.99 and 11.63 mg/g). The INIAP 381 (Pink) variety, obtained using Soxhlet extraction, presented the highest iodine value (114.28 cg/g) and a cyanide content of 0.76 ppm. In conclusion, the INIAP 380 (Black) variety, extracted using Soxhlet extraction, showed the best yield and oil quality, while the pressing methods favored higher saponification values, demonstrating the influence of the variety and extraction method on the physicochemical properties of peanut oil.
- Open Access
- 5 December 2025
- Published by Universidad Nacional de Cuyo in Revista de la Facultad de Ciencias Agrarias UNCuyo
- Vol. 57 (2) , 177-186
Comparison of fatty acid profiles of sacha inchi oil (Plukenetia huayllabambana), sesame oil (Sesamum indicum), and peanut oil (Arachis hypogaea) using two extraction methods for food purposes
Vegetable oil consumption has increased in recent decades due to the high content of monounsaturated (Omega 9) and polyunsaturated (Omega 3 and 6) fatty acids. For this reason, this research compared the fatty acid profile of sacha inchi, sesame and peanut oils under two extraction methods for food purposes. A completely randomized experimental design considered an A*B factorial arrangement with 3 repetitions. Factor A corresponds to oilseed type and Factor B is extraction method. The results showed that both factors significantly influenced (p<0.05) bromatological characteristics (pH, acidity, peroxide value, relative density and ash). The lowest concentration of saturated fatty acids was obtained in sacha inchi oil + cold pressing (6.80 g/100 g), while monounsaturated fatty acids increased in peanut oil + hot pressing (51.51 g/100 g). Sacha inchi oil + cold pressing had the highest content of polyunsaturated fatty acids (84.36 g/100 g). Highlights: Comparison of lipid profiles in sacha inchi, sesame, and peanut oils. Cold extraction preserves quality, hot extraction increases yield. Cold-pressed sacha inchi contains more polyunsaturated fatty acids. Hot-pressed peanut is more stable and has lower acidity. Sacha inchi provides omega-3, while peanut and sesame are more oxidation-stable.
- 5 December 2025
- Published by Universidad Nacional de Cuyo in Revista de la Facultad de Ciencias Agrarias UNCuyo
- Vol. 57 (2) , 177-186
Open AccessComparison of fatty acid profiles of sacha inchi oil (Plukenetia huayllabambana), sesame oil (Sesamum indicum), and peanut oil (Arachis hypogaea) using two extraction methods for food purposes
Vegetable oil consumption has increased in recent decades due to the high content of monounsaturated (Omega 9) and polyunsaturated (Omega 3 and 6) fatty acids. For this reason, this research compared the fatty acid profile of sacha inchi, sesame and peanut oils under two extraction methods for food purposes. A completely randomized experimental design considered an A*B factorial arrangement with 3 repetitions. Factor A corresponds to oilseed type and Factor B is extraction method. The results showed that both factors significantly influenced (p<0.05) bromatological characteristics (pH, acidity, peroxide value, relative density and ash). The lowest concentration of saturated fatty acids was obtained in sacha inchi oil + cold pressing (6.80 g/100 g), while monounsaturated fatty acids increased in peanut oil + hot pressing (51.51 g/100 g). Sacha inchi oil + cold pressing had the highest content of polyunsaturated fatty acids (84.36 g/100 g). Highlights: Comparison of lipid profiles in sacha inchi, sesame, and peanut oils. Cold extraction preserves quality, hot extraction increases yield. Cold-pressed sacha inchi contains more polyunsaturated fatty acids. Hot-pressed peanut is more stable and has lower acidity. Sacha inchi provides omega-3, while peanut and sesame are more oxidation-stable.
- Open Access
- 1 July 2025
- Published by Universidad del Cauca in Biotecnología en el Sector Agropecuario y Agroindustrial
- Vol. 23 (2) , 62-73
Physicochemical, microbiological and sensory evaluation of spaghetti made from mealworm (Tenebrio molitor L) and corn (Zea mays)
Tenebrio molitor L., also known as the mealworm, is used in the production of noodles as an alternative protein source, improving their nutritional value and providing a high content of essential amino acids. For this reason, the aim of this study was to evaluate the sensory, physicochemical, and microbiological characteristics of pastas made from Tenebrio molitor L. flour (HTM) and corn (Zea mays) flour (HM). A Completely Randomized Design (CRD) was used to evaluate sensory characteristics, physicochemical properties, cooking time, water absorption, and microbiological quality of the pastas. According to the results, sensory analysis showed that the inclusion of 71 % corn flour/7,5 % Tenebrio molitor L. flour (T2) had the highest acceptance, with means of 3,90±0,04 for taste, 4,03±0,03 for odor, 3,73±0,05 for color, and 3,70±0,04 for texture. Additionally, the physicochemical characterization showed values of acidity at 0,30±0,05 %, moisture at 36,30±0,04 %, protein at 9,40±0,05 %, and cholesterol at 54,30±0,02 mg/100g. The cooking time was similar between the Tenebrio molitor spaghetti (T2) and the control (T0), with both cooking in 25 minutes, although the T2 spaghetti had lower water absorption (72,32 %) compared to the T0 (120 %). Microbiological analysis showed the absence of Salmonella and low levels of molds and yeasts, meeting food safety standards. These results suggest that spaghetti with Tenebrio molitor has potential as a functional, nutritious, and acceptable food product for consumers, offering a sustainable alternative in the food industry.
- 1 July 2025
- Published by Universidad del Cauca in Biotecnología en el Sector Agropecuario y Agroindustrial
- Vol. 23 (2) , 62-73
Open AccessPhysicochemical, microbiological and sensory evaluation of spaghetti made from mealworm (Tenebrio molitor L) and corn (Zea mays)
Tenebrio molitor L., also known as the mealworm, is used in the production of noodles as an alternative protein source, improving their nutritional value and providing a high content of essential amino acids. For this reason, the aim of this study was to evaluate the sensory, physicochemical, and microbiological characteristics of pastas made from Tenebrio molitor L. flour (HTM) and corn (Zea mays) flour (HM). A Completely Randomized Design (CRD) was used to evaluate sensory characteristics, physicochemical properties, cooking time, water absorption, and microbiological quality of the pastas. According to the results, sensory analysis showed that the inclusion of 71 % corn flour/7,5 % Tenebrio molitor L. flour (T2) had the highest acceptance, with means of 3,90±0,04 for taste, 4,03±0,03 for odor, 3,73±0,05 for color, and 3,70±0,04 for texture. Additionally, the physicochemical characterization showed values of acidity at 0,30±0,05 %, moisture at 36,30±0,04 %, protein at 9,40±0,05 %, and cholesterol at 54,30±0,02 mg/100g. The cooking time was similar between the Tenebrio molitor spaghetti (T2) and the control (T0), with both cooking in 25 minutes, although the T2 spaghetti had lower water absorption (72,32 %) compared to the T0 (120 %). Microbiological analysis showed the absence of Salmonella and low levels of molds and yeasts, meeting food safety standards. These results suggest that spaghetti with Tenebrio molitor has potential as a functional, nutritious, and acceptable food product for consumers, offering a sustainable alternative in the food industry.
- Open Access
- 4 July 2023
- Published by Universidad Tecnica Estatal de Quevedo in Revista InGenio
- Vol. 6 (2) , 40-50
Obtención de almidón de malanga: Colocasia esculenta L. y Xanthosoma sagittifolium L, mediante la aplicación de tres métodos químicos
La malanga (Colacasia esculenta L.), debido a su acelerado desarrollo vegetativo y sencilla propagación, se ha convertido en uno de los principales cultivos de las zonas tropicales del Ecuador. Gracias a sus propiedades bioquímicas y su alto valor nutricional ha permitido aplicar tecnologías sencillas para aprovechar este recurso agrícola en la obtención de almidón para la utilización en diferentes alimentos. El objetivo de esta investigación fue obtener almidón a partir de dos variedades de malanga Colocasia esculenta L y Xanthosoma sagittifolium L, mediante la aplicación de tres métodos químicos (ácido cítrico, ácido clorhídrico, ácido fosfórico), en el cual finalmente se realizó un proceso de decantación y centrifugación. Se aplicó un ANOVA, con diseño de bloques completamente al azar mediante arreglo factorial A*B*C, obteniéndose un total de 12 tratamientos y 3 repeticiones. Se estableció las diferencias estadísticas entre las medias de los tratamientos con la prueba de Tukey (P>0,05). Se obtuvo un mayor rendimiento en el tratamiento Malanga Blanca + Centrifugación + Ácido cítrico 29,34%, en lo que corresponde a la acidez y pH, los valores se encontraron dentro de lo establecido por trabajos similares, el porcentaje de fibra más elevado se presentó en el tratamiento Malanga lila + Decantación + Ácido fosfórico (0,68%), mientras que la humedad se encuentra dentro de los parámetros permitidos de la INEN 616, la cual señala un 14% y una temperatura de gelatinización óptima en el tratamiento Malanga blanca + Decantación + Ácido fosfórico (56,53°C).
- 4 July 2023
- Published by Universidad Tecnica Estatal de Quevedo in Revista InGenio
- Vol. 6 (2) , 40-50
Open AccessObtención de almidón de malanga: Colocasia esculenta L. y Xanthosoma sagittifolium L, mediante la aplicación de tres métodos químicos
La malanga (Colacasia esculenta L.), debido a su acelerado desarrollo vegetativo y sencilla propagación, se ha convertido en uno de los principales cultivos de las zonas tropicales del Ecuador. Gracias a sus propiedades bioquímicas y su alto valor nutricional ha permitido aplicar tecnologías sencillas para aprovechar este recurso agrícola en la obtención de almidón para la utilización en diferentes alimentos. El objetivo de esta investigación fue obtener almidón a partir de dos variedades de malanga Colocasia esculenta L y Xanthosoma sagittifolium L, mediante la aplicación de tres métodos químicos (ácido cítrico, ácido clorhídrico, ácido fosfórico), en el cual finalmente se realizó un proceso de decantación y centrifugación. Se aplicó un ANOVA, con diseño de bloques completamente al azar mediante arreglo factorial A*B*C, obteniéndose un total de 12 tratamientos y 3 repeticiones. Se estableció las diferencias estadísticas entre las medias de los tratamientos con la prueba de Tukey (P>0,05). Se obtuvo un mayor rendimiento en el tratamiento Malanga Blanca + Centrifugación + Ácido cítrico 29,34%, en lo que corresponde a la acidez y pH, los valores se encontraron dentro de lo establecido por trabajos similares, el porcentaje de fibra más elevado se presentó en el tratamiento Malanga lila + Decantación + Ácido fosfórico (0,68%), mientras que la humedad se encuentra dentro de los parámetros permitidos de la INEN 616, la cual señala un 14% y una temperatura de gelatinización óptima en el tratamiento Malanga blanca + Decantación + Ácido fosfórico (56,53°C).