Sibylle Riedel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sibylle Riedel has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Zhirong Zhao‐Karger
Helmholtz Institute Ulm (HIU) Ulm Germany
13 shared publications Maximilian Fichtner
Helmholtz Institute Ulm (HIU) Electrochemical Energy Storage Ulm Germany
6 shared publicationsLiping Wang
Ulm University Institute for Organic Chemistry II and Advanced Materials Ulm Germany
5 shared publications- Benjamin Wolfgang Schick
Institute of Electrochemistry Ulm University Albert-Einstein-Allee 47 89081 Ulm Germany
4 shared publications - Matthias Uhl
Institute of Electrochemistry Ulm University Albert-Einstein-Allee 47 89081 Ulm Germany
4 shared publications - Maximilian Fichtner
Helmholtz Institute Ulm for Electrochemical Energy Storage (HIU) Ulm Germany
4 shared publications
Latest Publications
- Open Access
- 21 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70379
Cover Feature: A Mechanical Engineering Approach Toward Practical Calcium Metal Anodes with Improved Electrochemical Performance (Batteries & Supercaps 7/2026)
- 21 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70379
Open AccessCover Feature: A Mechanical Engineering Approach Toward Practical Calcium Metal Anodes with Improved Electrochemical Performance (Batteries & Supercaps 7/2026)
- Open Access
- 24 April 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (5)
A Mechanical Engineering Approach Toward Practical Calcium Metal Anodes with Improved Electrochemical Performance
Rechargeable calcium (Ca) metal batteries present an exciting opportunity for electrochemical systems offering high energy density at low costs. Although Ca possesses intrinsic advantages as a metal anode, the feasibility of fabricating thin Ca metal foils for use as practical electrodes remains unexplored. This represents a critical objective for the realization of Ca metal batteries, while it currently limits the research progress in this area. In this study, we introduce a straightforward and effective method for producing Ca foils with a thickness of approximately 100 µm from inexpensive Ca metal chunks. Additionally, we demonstrate that mechanical deformation of Ca can induce alterations in hardness, structural features, and electrochemical properties. The as‐prepared Ca foils exhibit enhanced electrochemical performance underscoring that mechanical processing is a key parameter controlling the electrochemical reliability of Ca metal anodes and provides a scalable pathway toward more practical Ca metal battery architectures. This processing method could significantly contribute to the advancement of the research and development of Ca batteries.
- 24 April 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (5)
Open AccessA Mechanical Engineering Approach Toward Practical Calcium Metal Anodes with Improved Electrochemical Performance
Rechargeable calcium (Ca) metal batteries present an exciting opportunity for electrochemical systems offering high energy density at low costs. Although Ca possesses intrinsic advantages as a metal anode, the feasibility of fabricating thin Ca metal foils for use as practical electrodes remains unexplored. This represents a critical objective for the realization of Ca metal batteries, while it currently limits the research progress in this area. In this study, we introduce a straightforward and effective method for producing Ca foils with a thickness of approximately 100 µm from inexpensive Ca metal chunks. Additionally, we demonstrate that mechanical deformation of Ca can induce alterations in hardness, structural features, and electrochemical properties. The as‐prepared Ca foils exhibit enhanced electrochemical performance underscoring that mechanical processing is a key parameter controlling the electrochemical reliability of Ca metal anodes and provides a scalable pathway toward more practical Ca metal battery architectures. This processing method could significantly contribute to the advancement of the research and development of Ca batteries.
- Open Access
- 8 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (20) , e2500967
Melem‐Perylene Diimide Polymer Network as Efficient Positive Electrode for Rechargeable Lithium and Magnesium Batteries
Organic battery electrode materials represent a sustainable alternative compared to most inorganic electrodes, yet challenges persist regarding their energy density and cycling stability. In this work, a new organic electrode material is described, which is obtained via ionothermal polymerization of low‐cost starting materials, melem (2,5,8‐triamino‐tri‐ s ‐triazine) and perylenetetracarboxylic dianhydride (PTCDA). The resulting networked polymer Melem‐PDI exhibits favorable thermal and electrochemical properties, prompting investigation into its performance as a positive electrode material in rechargeable lithium and magnesium batteries. A hybrid material with carbon nanotubes ( Melem‐PDI‐CNT ) is found to exhibit‐excellent cycling stability in Li‐ion batteries at a current rate as high as 500 mA g −1 for 5000 cycles. While the Li‐ion storage is based on a pseudocapacitive mechanism, a diffusion‐controlled mechanism is observed in magnesium batteries. This work underscores that classic dyes (here: PDI) can be repurposed for energy storage, once they are integrated into suitable polymer topologies and brought into nanoscale contact with conductive materials.
- 8 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (20) , e2500967
Open AccessMelem‐Perylene Diimide Polymer Network as Efficient Positive Electrode for Rechargeable Lithium and Magnesium Batteries
Organic battery electrode materials represent a sustainable alternative compared to most inorganic electrodes, yet challenges persist regarding their energy density and cycling stability. In this work, a new organic electrode material is described, which is obtained via ionothermal polymerization of low‐cost starting materials, melem (2,5,8‐triamino‐tri‐ s ‐triazine) and perylenetetracarboxylic dianhydride (PTCDA). The resulting networked polymer Melem‐PDI exhibits favorable thermal and electrochemical properties, prompting investigation into its performance as a positive electrode material in rechargeable lithium and magnesium batteries. A hybrid material with carbon nanotubes ( Melem‐PDI‐CNT ) is found to exhibit‐excellent cycling stability in Li‐ion batteries at a current rate as high as 500 mA g −1 for 5000 cycles. While the Li‐ion storage is based on a pseudocapacitive mechanism, a diffusion‐controlled mechanism is observed in magnesium batteries. This work underscores that classic dyes (here: PDI) can be repurposed for energy storage, once they are integrated into suitable polymer topologies and brought into nanoscale contact with conductive materials.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 303
Multivalent Metal-Sulfide Batteries Reimagined – Combining Ca-Based Anodes with the VS4 Cathode
Continuing growth in both industrial and private use of electricity such as electric vehicles and AI usage in productivity results in a basic need for more efficient and higher energy storage solutions, preferably of sustainable and renewable energy sources. The state-of-the-art Lithium-Ion batteries (LIBs) are found everywhere, but the limited availability of key resources such as cobalt, nickel, lithium and graphite poses a great challenge for future energy storage. Multivalent metal batteries based on magnesium or calcium are promising complementary choices to LIBs starting with the higher abundancy (Ca 3.4 wt.-% in the earth’s crust) of alkaline earth metals compared to alkaline metals (Li 0.002 wt.-%). Especially calcium metal batteries are of great interest as Ca exhibits a redox potential against the standard hydrogen electrode (SHE) of -2.87 V, close to the one of lithium (-3.04 V).[1] The main challenges for multivalent metal batteries stem from their intrinsic electrochemistry, which differs greatly from that of batteries using monovalent shuttle ions, such as Li+ or Na+. Electrode materials or electrolytes working for LIBs are often found unsuitable for Mg or Ca systems. Fortunately, for both systems a suitable electrolyte system was found in the borate-based electrolytes M[B(hfip)4]2 (M = Mg, Ca). Nonetheless, even with the advancement of the electrolytes, Ca surface passivation proves to be another serious issue in Ca-based batteries. While the solid electrolyte interphase (SEI) in LIBs continues to be ion conductive, the surface layer formed in calcium batteries causes rapid capacity fading during cycling and short battery lifetime, delaying the technology readiness of the multivalent calcium battery systems. To tackle this issue in calcium-based batteries, a calcium-alloy material instead of a pure calcium metal can be used. This approach was already successful when combining a CaxSn composite anode with a 14PAQ cathode.[2] The Chevrel phase Mo6S8 is a well-known cathode material for magnesium-based batteries but suffers from low capacity and voltage (Ctheo = 129 mAh·g-1, Vdischarge = ~1.0 V). Changing from molybdenum to vanadium sulfide, VS4, the theoretical capacity is almost 3.5 times higher (Ctheo = 448 mAh·g-1) while still having the advantage of covalently bound sulfur within the structure.[3] Therefore, vanadium sulfide cathodes don’t suffer from polysulfide shuttling, the main challenge with elemental sulfur cathodes. With Mg metal anodes, VS4/rGO cathodes have already shown promising results (> 300 mAh·g-1, 1.4 V) as well as long lifetime. Since Ca2+ ions have a lower charge density and redox potential compared to magnesium, pairing the VS4 cathode with Ca metal anodes can lead to higher capacity and voltage in the full cell setup. Furthermore, by combining the vanadium sulfide cathodes with the calcium alloy anodes, two main challenges of Ca-S-based batteries, anode passivation and polysulfide shuttling, can be overcome, resulting in improved electrochemical performance. I. D. Hosein, ACS Energy Lett. 2021, 6, 1560–1565. Z. Zhao-Karger, Y. Xiu, Z. Li, A. Reupert, T. Smok, M. Fichtner, Nat. Commun. 2022 13, 3849. Z. Li, B. P. Vinayan, P. Jankowski, C. Njel, A. Roy, T. Vegge, J. Maibach, J. M. G. Lastra, M. Fichtner, Z. Zhao‐Karger, Angew. Chem. Int. Ed. 2020 59, 11483.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 303
Multivalent Metal-Sulfide Batteries Reimagined – Combining Ca-Based Anodes with the VS4 Cathode
Continuing growth in both industrial and private use of electricity such as electric vehicles and AI usage in productivity results in a basic need for more efficient and higher energy storage solutions, preferably of sustainable and renewable energy sources. The state-of-the-art Lithium-Ion batteries (LIBs) are found everywhere, but the limited availability of key resources such as cobalt, nickel, lithium and graphite poses a great challenge for future energy storage. Multivalent metal batteries based on magnesium or calcium are promising complementary choices to LIBs starting with the higher abundancy (Ca 3.4 wt.-% in the earth’s crust) of alkaline earth metals compared to alkaline metals (Li 0.002 wt.-%). Especially calcium metal batteries are of great interest as Ca exhibits a redox potential against the standard hydrogen electrode (SHE) of -2.87 V, close to the one of lithium (-3.04 V).[1] The main challenges for multivalent metal batteries stem from their intrinsic electrochemistry, which differs greatly from that of batteries using monovalent shuttle ions, such as Li+ or Na+. Electrode materials or electrolytes working for LIBs are often found unsuitable for Mg or Ca systems. Fortunately, for both systems a suitable electrolyte system was found in the borate-based electrolytes M[B(hfip)4]2 (M = Mg, Ca). Nonetheless, even with the advancement of the electrolytes, Ca surface passivation proves to be another serious issue in Ca-based batteries. While the solid electrolyte interphase (SEI) in LIBs continues to be ion conductive, the surface layer formed in calcium batteries causes rapid capacity fading during cycling and short battery lifetime, delaying the technology readiness of the multivalent calcium battery systems. To tackle this issue in calcium-based batteries, a calcium-alloy material instead of a pure calcium metal can be used. This approach was already successful when combining a CaxSn composite anode with a 14PAQ cathode.[2] The Chevrel phase Mo6S8 is a well-known cathode material for magnesium-based batteries but suffers from low capacity and voltage (Ctheo = 129 mAh·g-1, Vdischarge = ~1.0 V). Changing from molybdenum to vanadium sulfide, VS4, the theoretical capacity is almost 3.5 times higher (Ctheo = 448 mAh·g-1) while still having the advantage of covalently bound sulfur within the structure.[3] Therefore, vanadium sulfide cathodes don’t suffer from polysulfide shuttling, the main challenge with elemental sulfur cathodes. With Mg metal anodes, VS4/rGO cathodes have already shown promising results (> 300 mAh·g-1, 1.4 V) as well as long lifetime. Since Ca2+ ions have a lower charge density and redox potential compared to magnesium, pairing the VS4 cathode with Ca metal anodes can lead to higher capacity and voltage in the full cell setup. Furthermore, by combining the vanadium sulfide cathodes with the calcium alloy anodes, two main challenges of Ca-S-based batteries, anode passivation and polysulfide shuttling, can be overcome, resulting in improved electrochemical performance. I. D. Hosein, ACS Energy Lett. 2021, 6, 1560–1565. Z. Zhao-Karger, Y. Xiu, Z. Li, A. Reupert, T. Smok, M. Fichtner, Nat. Commun. 2022 13, 3849. Z. Li, B. P. Vinayan, P. Jankowski, C. Njel, A. Roy, T. Vegge, J. Maibach, J. M. G. Lastra, M. Fichtner, Z. Zhao‐Karger, Angew. Chem. Int. Ed. 2020 59, 11483.
- Open Access
- 1 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (17) , e202500999
Ca2+‐Driven Enhancement of Anodic Performance and Sulfur Utilization for Magnesium–Sulfur Batteries
Magnesium–sulfur (Mg–S) batteries are emerging as promising energy storage systems due to their cost‐effectiveness, safety, and high theoretical volumetric energy density. However, their practical implementation is hindered by sluggish sulfur redox kinetics with Mg2+ and severe polysulfide shuttling. Here, a double‐divalent Mg–Ca hybrid electrolyte is introduced, where a small amount of Ca2+ additive significantly enhances sulfur redox kinetics, leading to higher sulfur utilization. Notably, Ca2+ primarily facilitates the solid‐to‐solid conversion of disulfide to sulfide. In addition to the cathode reaction, the Mg–Ca hybrid electrolyte also contributes to the anode reaction; it enables smoother Mg plating and reduces overpotential with the long cycle (>1000 cycles). For mitigating the polysulfide shuttling, the glass fiber separator with ultrasmall α‐MnO2 nanoparticles is modified to adsorb polysulfide. This synergistic strategy of electrolyte and separator engineering enables the Mg–S battery to achieve an initial capacity exceeding 1000 mAh g−1 and extended cycling stability. These findings highlight the potential of Mg–Ca hybrid electrolytes and nanosized α‐MnO2‐modified separators in the development of high‐performance Mg–S batteries.
- 1 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (17) , e202500999
Open AccessCa2+‐Driven Enhancement of Anodic Performance and Sulfur Utilization for Magnesium–Sulfur Batteries
Magnesium–sulfur (Mg–S) batteries are emerging as promising energy storage systems due to their cost‐effectiveness, safety, and high theoretical volumetric energy density. However, their practical implementation is hindered by sluggish sulfur redox kinetics with Mg2+ and severe polysulfide shuttling. Here, a double‐divalent Mg–Ca hybrid electrolyte is introduced, where a small amount of Ca2+ additive significantly enhances sulfur redox kinetics, leading to higher sulfur utilization. Notably, Ca2+ primarily facilitates the solid‐to‐solid conversion of disulfide to sulfide. In addition to the cathode reaction, the Mg–Ca hybrid electrolyte also contributes to the anode reaction; it enables smoother Mg plating and reduces overpotential with the long cycle (>1000 cycles). For mitigating the polysulfide shuttling, the glass fiber separator with ultrasmall α‐MnO2 nanoparticles is modified to adsorb polysulfide. This synergistic strategy of electrolyte and separator engineering enables the Mg–S battery to achieve an initial capacity exceeding 1000 mAh g−1 and extended cycling stability. These findings highlight the potential of Mg–Ca hybrid electrolytes and nanosized α‐MnO2‐modified separators in the development of high‐performance Mg–S batteries.
- Open Access
- 25 June 2025
- Published by Wiley in Advanced Science
- Vol. 12 (33) , e06498
Electrolyte Transport Parameters and Interfacial Effects in Calcium Metal Batteries: Analogies and Differences to Magnesium and Lithium Counterparts
Magnesium and calcium metal batteries are promising emerging technologies. Their high capacity and low redox potential translate to a high theoretical energy density, making them attractive candidates for future energy storage solutions. Owing to their neighboring position and the diagonal relationship in the periodic table to lithium, Mg 2+ , Ca 2+ , and Li + ions feature commonalities in terms of ionic radius, carried charge, and charge density. The present study aims to shed light on the similarities but also differences of Ca electrolytes and metal anodes in comparison to their Mg and Li counterparts in terms of transport properties and processes at the anode/electrolyte interface, respectively. To ensure comparability, an electrolyte comprising B(hfip) 4 − anions in monoglyme is applied in either case. By executing galvanostatic polarization and pulsing with different separator materials, the separator tortuosity, diffusion coefficient, and transference number are determined. Further, the charge transfer characteristics as well as the adsorption layer and solid electrolyte interphase formation are investigated by electrochemical impedance spectroscopy. The cation charge density was found to be crucial for diffusion and desolvation processes, yet surprisingly, also a cation‐dependent separator tortuosity was observed. The study concludes with a recommendation on suitable separators for each metal battery system.
- 25 June 2025
- Published by Wiley in Advanced Science
- Vol. 12 (33) , e06498
Open AccessElectrolyte Transport Parameters and Interfacial Effects in Calcium Metal Batteries: Analogies and Differences to Magnesium and Lithium Counterparts
Magnesium and calcium metal batteries are promising emerging technologies. Their high capacity and low redox potential translate to a high theoretical energy density, making them attractive candidates for future energy storage solutions. Owing to their neighboring position and the diagonal relationship in the periodic table to lithium, Mg 2+ , Ca 2+ , and Li + ions feature commonalities in terms of ionic radius, carried charge, and charge density. The present study aims to shed light on the similarities but also differences of Ca electrolytes and metal anodes in comparison to their Mg and Li counterparts in terms of transport properties and processes at the anode/electrolyte interface, respectively. To ensure comparability, an electrolyte comprising B(hfip) 4 − anions in monoglyme is applied in either case. By executing galvanostatic polarization and pulsing with different separator materials, the separator tortuosity, diffusion coefficient, and transference number are determined. Further, the charge transfer characteristics as well as the adsorption layer and solid electrolyte interphase formation are investigated by electrochemical impedance spectroscopy. The cation charge density was found to be crucial for diffusion and desolvation processes, yet surprisingly, also a cation‐dependent separator tortuosity was observed. The study concludes with a recommendation on suitable separators for each metal battery system.
- Open Access
- 7 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Melem-PDI polymer network as efficient positive electrode for rechargeable lithium and magnesium batteries
Organic battery electrode materials represent a sustainable alternative compared to most inorganic electrodes, yet challenges persist regarding their energy density and cycling stability. In this work, we describe a new organic electrode material, which is obtained via ionothermal polymerization of low-cost starting materials melem (2,5,8-triamino-tri-s-triazine) and perylenetetracarboxylic dianhydride (PTCDA). The resulting networked polymer Melem-PDI exhibits favourable thermal and electrochemical properties that prompted us to investigate its performance as a positive electrode material in rechargeable lithium and magnesium batteries. We found that a hybrid material with carbon nanotubes (Melem-PDI-CNT) exhibits excellent cycling stability in Li-ion batteries at a current rate as high as 500 mA g-1 for 5000 cycles. While the Li-ion storage is based on a pseudocapacitive mechanism, a diffusion-controlled mechanism was observed in magnesium batteries. Our work underscores that classic dyes (here: PDI) can be re-purposed for energy storage, once they are integrated into suitable polymer topologies and brought into nanoscale contact with conductive materials.
- 7 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMelem-PDI polymer network as efficient positive electrode for rechargeable lithium and magnesium batteries
Organic battery electrode materials represent a sustainable alternative compared to most inorganic electrodes, yet challenges persist regarding their energy density and cycling stability. In this work, we describe a new organic electrode material, which is obtained via ionothermal polymerization of low-cost starting materials melem (2,5,8-triamino-tri-s-triazine) and perylenetetracarboxylic dianhydride (PTCDA). The resulting networked polymer Melem-PDI exhibits favourable thermal and electrochemical properties that prompted us to investigate its performance as a positive electrode material in rechargeable lithium and magnesium batteries. We found that a hybrid material with carbon nanotubes (Melem-PDI-CNT) exhibits excellent cycling stability in Li-ion batteries at a current rate as high as 500 mA g-1 for 5000 cycles. While the Li-ion storage is based on a pseudocapacitive mechanism, a diffusion-controlled mechanism was observed in magnesium batteries. Our work underscores that classic dyes (here: PDI) can be re-purposed for energy storage, once they are integrated into suitable polymer topologies and brought into nanoscale contact with conductive materials.
- Open Access
- 22 April 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (12)
Diethylene Glycol Diethyl Ether as Electrolyte Solvent for Reversible Electrochemical Magnesium Plating
Due to their high theoretical energy density and the abundance of magnesium, rechargeable Mg batteries are promising candidate systems for future energy storage. However, finding suitable electrolytes that are compatible with the metallic Mg electrode and enable highly reversible Mg plating is still challenging. Typical electrolytes for rechargeable magnesium batteries are based on ether solvents such as tetrahydrofuran (THF), dimethoxyethane (DME), or higher glymes. Drawbacks are the high volatilites and low flashpoints of THF and DME and their harmfulness, problematic factors for industrial applicability. One potential alternative is diethylene glycol diethyl ether (DEGDEE) which is also an ether, but has significantly higher boiling and flashpoints than THF and DME, and is from today's perspective less harmful than any of the previously mentioned solvents. To test the suitability and stability of this class of electrolytes, different Mg salts in combination with DEGDEE for their electrochemical Mg plating and stripping properties are studied. Although Mg deposition needs higher overpotentials than for their DME‐based counterparts, the investigated electrolytes enable reversible Mg plating with relatively high Coulombic efficiencies, making DEGDEE a promising alternative electrolyte solvent for rechargeable Mg batteries.
- 22 April 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (12)
Open AccessDiethylene Glycol Diethyl Ether as Electrolyte Solvent for Reversible Electrochemical Magnesium Plating
Due to their high theoretical energy density and the abundance of magnesium, rechargeable Mg batteries are promising candidate systems for future energy storage. However, finding suitable electrolytes that are compatible with the metallic Mg electrode and enable highly reversible Mg plating is still challenging. Typical electrolytes for rechargeable magnesium batteries are based on ether solvents such as tetrahydrofuran (THF), dimethoxyethane (DME), or higher glymes. Drawbacks are the high volatilites and low flashpoints of THF and DME and their harmfulness, problematic factors for industrial applicability. One potential alternative is diethylene glycol diethyl ether (DEGDEE) which is also an ether, but has significantly higher boiling and flashpoints than THF and DME, and is from today's perspective less harmful than any of the previously mentioned solvents. To test the suitability and stability of this class of electrolytes, different Mg salts in combination with DEGDEE for their electrochemical Mg plating and stripping properties are studied. Although Mg deposition needs higher overpotentials than for their DME‐based counterparts, the investigated electrolytes enable reversible Mg plating with relatively high Coulombic efficiencies, making DEGDEE a promising alternative electrolyte solvent for rechargeable Mg batteries.
- Open Access
- 19 November 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (52)
Einfluss von Chlorid und Elektrolytstabilität auf die Bildung von Passivierungsschichten an der Negativen Elektrode von Mg Batterien: eine operando EQCM‐D Studie
Wieder aufladbare Magnesium Batterien sind vielversprechend für die zukünftige Energiespeicherung. Ihre praktische Anwendung wird jedoch unter anderem durch niedrige Coulomb'sche Effizienzen bei der Magnesiumabscheidung und ‐auflösung behindert. Grundlegende Prozesse wie die Bildung, Struktur und Stabilität von Passivierungsschichten und der Einfluss verschiedener Elektrolytbestandteile auf diese sind immer noch nicht vollständig verstanden. In dieser Studie erhalten wir einzigartige Einblicke in die ersten Magnesiumabscheidungs‐ und auflösungszyklen, indem wir Magnesium bis(trifluoromethansulfonyl)imid (Mg(TFSI)2)‐ und Magnesium tetrakis(hexafluoroisopropyloxy)borat (Mg[B(hfip)4]2)‐basierte Elektrolyte, jeweils mit und ohne MgCl2, operando auf Goldelektroden mittels hochempfindlicher elektrochemischer Quarzmikrowaage mit Dissipationsmessung (EQCM−D) unter Anwendung hydrodynamischer Spektroskopie vergleichen. Mit den stabilen Mg[B(hfip)4]2‐basierten Elektrolyten ist hocheffizientes und Interphasen‐freies Zyklieren möglich, während die Bildung von Passivierungsschichten Elektrolytverunreinigungen zugerechnet werden kann. Diese bilden sich und degradieren während des sogenannten Konditionierungsprozesses. Mit dem reaktiveren Mg(TFSI)2‐basierten Elektrolyten wachsen während des Zyklierens dicke Passivierungsschichten mit kleinen Poren. Wir zeigen, dass die Zugabe von MgCl2 bei diesen Elektrolyten die Menge an passiviertem Mg verringert und die stromlose Auflösung der Passivierungsschicht beschleunigt. Dies hat einen positiven Effekt, da wir das effizienteste Zyklieren und die gleichmäßigste Abscheidung beobachten, wenn sich keine Interphase auf der Elektrode befindet.
- 19 November 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (52)
Open AccessEinfluss von Chlorid und Elektrolytstabilität auf die Bildung von Passivierungsschichten an der Negativen Elektrode von Mg Batterien: eine operando EQCM‐D Studie
Wieder aufladbare Magnesium Batterien sind vielversprechend für die zukünftige Energiespeicherung. Ihre praktische Anwendung wird jedoch unter anderem durch niedrige Coulomb'sche Effizienzen bei der Magnesiumabscheidung und ‐auflösung behindert. Grundlegende Prozesse wie die Bildung, Struktur und Stabilität von Passivierungsschichten und der Einfluss verschiedener Elektrolytbestandteile auf diese sind immer noch nicht vollständig verstanden. In dieser Studie erhalten wir einzigartige Einblicke in die ersten Magnesiumabscheidungs‐ und auflösungszyklen, indem wir Magnesium bis(trifluoromethansulfonyl)imid (Mg(TFSI)2)‐ und Magnesium tetrakis(hexafluoroisopropyloxy)borat (Mg[B(hfip)4]2)‐basierte Elektrolyte, jeweils mit und ohne MgCl2, operando auf Goldelektroden mittels hochempfindlicher elektrochemischer Quarzmikrowaage mit Dissipationsmessung (EQCM−D) unter Anwendung hydrodynamischer Spektroskopie vergleichen. Mit den stabilen Mg[B(hfip)4]2‐basierten Elektrolyten ist hocheffizientes und Interphasen‐freies Zyklieren möglich, während die Bildung von Passivierungsschichten Elektrolytverunreinigungen zugerechnet werden kann. Diese bilden sich und degradieren während des sogenannten Konditionierungsprozesses. Mit dem reaktiveren Mg(TFSI)2‐basierten Elektrolyten wachsen während des Zyklierens dicke Passivierungsschichten mit kleinen Poren. Wir zeigen, dass die Zugabe von MgCl2 bei diesen Elektrolyten die Menge an passiviertem Mg verringert und die stromlose Auflösung der Passivierungsschicht beschleunigt. Dies hat einen positiven Effekt, da wir das effizienteste Zyklieren und die gleichmäßigste Abscheidung beobachten, wenn sich keine Interphase auf der Elektrode befindet.
- Open Access
- 19 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (52) , e202413058
Influence of Chloride and Electrolyte Stability on Passivation Layer Evolution at the Negative Electrode of Mg Batteries Revealed by operando EQCM‐D
Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 )‐ and magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip) 4 ] 2 )‐based electrolytes, each with and without MgCl 2 , on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM−D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip) 4 ] 2 ‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI) 2 ‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.
- 19 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (52) , e202413058
Open AccessInfluence of Chloride and Electrolyte Stability on Passivation Layer Evolution at the Negative Electrode of Mg Batteries Revealed by operando EQCM‐D
Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 )‐ and magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip) 4 ] 2 )‐based electrolytes, each with and without MgCl 2 , on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM−D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip) 4 ] 2 ‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI) 2 ‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.