BŞBuğra Şensoy

Buğra Şensoy

*This is an algorithmically generated author record based on publicly available information.

Buğra Şensoy has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Evaluation of Innovative Anti-Fog Coating Technologies in Refrigerated Display Cabinets for Optical Transparency and Energy Savings

    by Buğra Şensoy, Fatma Nur Erdoğmuş, Yaren Güven, Halil Yasin Zengin, Tarık Asar, Mustafa Aktaş

    Glass fogging in refrigerated display cabinets (RDCs) reduces product visibility, thereby increasing door-opening frequency, and substantially elevates energy consumption, making effective anti-fog solutions a critical priority for commercial refrigeration. This study evaluates next-generation glass surface coating technologies through a combination of a systematic literature review and experimental analyses conducted under ISO 23953-2:2023 Climate Class 3 conditions. The study examines superhydrophilic and superhydrophobic surface modifications, transparent conductive oxide (TCO), indium tin oxide (ITO), fluorine-doped tin oxide (FTO), silicate-polyvinyl alcohol (PVA) composites, and titanium dioxide (TiO₂) based structures produced via vacuum deposition, laser ablation, and layer-by-layer deposition. Experimental findings show that using this anti-fog coating can reduce total energy consumption by up to 22% compared to anti-sweat heater systems. This improvement is achieved by eliminating continuous electric heating. These results confirm that next-generation anti-fog glass technologies offer a technically sound and energy-efficient solution for sustainable commercial refrigeration systems.

  • Innovative Proposals for Defogging Design Criteria of Refrigerated Display Cabinets

    by Yaren Güven, Sümeyra İbIş, Buğra Şensoy, Mustafa Aktaş

    Fogging on glass surfaces in refrigerated display cabinets (RDCs) significantly impacts product visibility, energy consumption, air curtain stability, product temperature uniformity, and, indirectly, food safety. Traditionally used, continuously operating anti-sweat heaters and anti-fog coatings require more sustainable solutions due to high operating costs and long-term performance decline. This study investigates the effects of airflow structure, structural design, advanced material properties, and control strategies on fog formation, and proposes design-oriented approaches to prevent fog formation during its development phase. In addition to structural improvements such as composite profiles that reduce thermal bridges, hydrophobic materials, Low-E coating glass, and argon-filled multi-pane glass units, this study proposes optimizing discharge air grille angles to increase air curtain stability, panel perforation strategies based on loading scenarios, and environmentally sensitive control algorithms. The proposed approaches aim to improve energy efficiency while maintaining food safety and ensuring sustainable operational performance. It can be estimated that implementing these proposals will result in energy savings of 5-10%.

  • New condensate water removal method a plug-in RDC: experimental and regression analysis

    by Buğra Şensoy, Hatice Oncel Cekim, Mustafa Aktaş, Sedanur Bilgin, Fatma Nur Erdoğmuş, Sümeyra İbIş

  • Performance Analysis of Food Refrigeration System Without Defrost Operation: Eco‐Design Approach

    by Mustafa Aktaş, Süleyman Erten, Ahmet Aktaş, Buğra Şensoy, Yaren Güven

    In this study, the average evaporation temperatures of the refrigerated display cabinets (RDC) operating according to 3M0 (+4°C/−1°C) and 3M1 (+5°C/−1°C) conventional fan‐assisted defrost (CFAD) and new without defrost (NWD) operation were −2.5°C for 3M0 NWD, −10°C for 3M0 CFAD, 3M1 NWD −1.5°C, 3M1 CFAD −8°C while the condensation temperature was 45°C for both systems. The experimental study was carried out at 3M0 and 3M1 temperature classes for both processes. With the design working according to the NWD process, the refrigerated package temperatures were kept at appropriate levels by the standards. With this design change, it was experimentally calculated that the annual energy consumption values of the refrigeration system were reduced by 10.52% and 10.99% in the 3M0/3M1 temperature classes, respectively. The energy efficiency index (EEI) values were reduced by 10.60% and 10.97% in the 3M0/3M1 temperature classes, respectively. In this respect, the energy class labeling of the refrigeration system has been improved from “B” to “A” for both temperature classes. Carbon emission values of the designs are analyzed; when switching from the CFAD process to the NWD process, the annual carbon emission values decreased from 915.42 kgCO2/year to 819.06 kgCO2/year in the 3M0 temperature class and from 891.33 kgCO2/year to 793.36 kgCO2/year in the 3M1 temperature class. With the eco‐design realized as a result of the study, the package temperatures of the refrigerated products were kept within the values required by the standard, and carbon emissions were reduced due to the improvement in the energy label. Thus, these findings have important implications for food protection processes.


  • Open Access

    Güneş Enerjisi Destekli Enerji Depolamalı Yeni Nesil Eko Kurutucu Tasarımı

    by Zafer Deniz, Mustafa Aktaş, Yaren Güven, Buğra Şensoy

    Gerçekleştirilen bu çalışmada sadece güneş enerjisinin kullanıldığı, enerjinin depolandığı ve sistemdeki atık ısının geri kazanıldığı bir eko kurutma sistemi tasarlanmıştır. Kurutulacak ürün türüne göre sıcaklık ve bağıl nem kontrolü yapılarak çalışma modunun belirlendiği bu tasarımda, belirlenen mod ile üründe oluşabilecek kusurlar ve kurutma süresi azaltılabilecektir. Farklı çalışma modları ile güneş enerjisinden maksimum fayda sağlanacak, güneş enerjisinden yararlanılmadığı zamanlarda ise depolanan enerjinin kullanımı ile hem enerji tasarrufu sağlanacak hem de CO2 salımı azaltılacaktır. Yeni nesil eko kurutma sistemi ile kurutma işleminin devamlılığı sağlanarak, atık ısı desteğiyle enerji verimliliği arttırılacaktır. Güneşin kesikli olduğu zamanlarda da kurutma devam ettirilerek güneş enerjisi desteğiyle arzu edilen kalitede kurutulmuş ürün elde edilebilecektir. Çevreci ve sürdürülebilir bir yapıya sahip olan yeni nesil eko kurutucu, karbon ayak izini küçülterek Paris İklim Anlaşması’nın hedeflerinin gerçekleşmesine katkı sağlayacaktır.


  • Open Access

    Akışkan Yatak Kurutma Prosesi İçin Isı Pompalı Ön Isıtmanın Termoekonomik Analizi

    by Buğra Şensoy, Mustafa Aktaş, Veysel Durak, Zahide Baran Tanrıkulu, Merve Mergen, Merve Ulular

    Enerji verimliliği, küresel ısınma ve iklim değişikliği günümüzde üzerinde durulan en önemli konuların başında gelmektedir. Tüketilen enerjinin etkin ve verimli kullanımına ilişkin yeni tasarımlar yaparken de tasarımlarda kullanılacak yenilikçi ve verimli teknolojiler ekonomi ve çevresel olumsuz etkilerin azaltılmasına katkı sağlayacaktır. Bu çalışmada; tamamen gaz yakıcı bir cihazla çalışan döküm sektöründe kullanılan akışkan yataklı bir kum kurutma sistemine ısı pompası entegre edilerek doğalgaz tüketimi azaltılmaya ve bu sayede sistem kullanıcılarına doğrudan ve dolaylı kazanımlar yaratılmaya çalışılmıştır. Sudan suya çalışan ve çevre dostu R32 soğutucu akışkanı kullanılarak 20°C’deki ortam havasını 45°C’ye ön ısıtma yapacak şekilde tasarımı yapılan ısı pompası sisteminin performans katsayısı (COPIP) 3,88 olarak hesaplanmıştır. Isı pompası entegrasyonu sayesinde sistem yıllık 36.839,1 Nm3 doğalgaz tasarrufu gerçekleştirilecektir. Bu entegrasyon ile sistemin yıllık çalışma süresi, elektrik ve doğalgaz birim maliyetleri baz alınarak, işletmecisine 193.501,25 ₺/yıl mali tasarruf sağlayacağı öngörülmektedir. Sisteme entegre edilen ısı pompasının; ekipman ve kurulum fiyatı, güncel kur değeri ile yıllık mali tasarruf miktarı parametreleri dahilinde, sistemin amortisman süresi 1,50 yıl olarak hesaplanmıştır. Ayrıca sistemde kurulacak fotovoltaik paneller ile enerji üretilerek karbon emisyonunun azaltılabileceği ve yine fotovoltaik panellerin marifetiyle işletmeci firmaya ek bir gelir kalemi oluşturulabileceği de öngörülmektedir.

  • Open Access

    Residential Heating Application with Eco Design Approach

    by Buğra ŞENSOY, Mustafa Aktaş

    Günümüzde oldukça popüler olan enerji mimarisi kavramına bağlı olarak eko tasarım uygulamaları ve yeşil bina sertifikaları günden güne prestij kazanmaktadır. Bu sertifikaların alınabilmesi için, yapılarda tüketilen enerjinin yerinde ve yenilenebilir enerji teknolojileri ile üretilerek fosil yakıtların kullanımının sınırlandırılması gerekmektedir. Bunun yanında, sertifika alım sürecinde, enerjinin etkin ve verimli kullanılabilmesi konusunda ısı yalıtımı süreçleri de ön plana çıkmaktadır. Ayrıca bu çalışma yukarıdaki kriterler dahilinde, nSEB kapsamında inşa edilecek binalar için örnek bir uygulama mahiyetini de taşımaktadır. Yapılan bu çalışmada Ankara iklim şartlarında yer alan bir villanın etkin enerji verimliliği süreci için TS 825 “Binalarda Isı Yalıtım Kuralları” standardına bağlı kalınarak ısı yalıtımı yapılmış ve villanın ısıtma sezonunda ihtiyaç duyacağı ısıtma yükü hesaplanmıştır. Normal koşullarda mahal ısıtma ve kullanım sıcak suyu için gaz yakıcı cihaz kullanılan villada, PV/T paneller desteği ile yeni nesil bir ısıtma sistemi tasarımı yapılmış ve ısı pompası sistemi kullanılmıştır. Yapılan tasarımda evaporasyon ve kondenzasyon sıcaklıkları sırasıyla 10°C ve 50°C olarak kabul edilerek sistemde R410A soğutucu akışkanı kullanılmıştır. Güneş enerjisi destekli bu ısı pompası tasarımının COP değeri 4,65 olarak hesaplanmıştır. Isıtma sezonunda villanın mahal ısıtma ve kullanım sıcak suyu için ihtiyacı olan 1.345,88 kWh enerjinin %39,60’sında gaz yakıcı cihaza gereksinim duyulmadan tek başına PV/T destekli ısı pompası sistemi enerji ihtiyacını karşılamış, ısıtma sezonu boyunca tasarruf edilen doğalgaz miktarı 426,37 m3, bu miktarın ekonomik karşılığı ise 2.579,41 ₺ olarak hesaplanmıştır. Ayrıca doğalgaz tüketiminde yaşanan azalma ile yılda 0,861 ton CO2 salınımının önüne geçildiği saptanmıştır.