Xianbiao Zhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xianbiao Zhan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Hao Yan
Shijiazhuang Campus, Army Engineering University of PLA, Shijiazhuang 050003, China
6 shared publications - Zhenghao Wu
Shijiazhuang Campus, Army Engineering University of PLA, Shijiazhuang 050003, China
5 shared publications - Xisheng Jia
Shijiazhuang Campus, Army Engineering University of PLA, Shijiazhuang 050003, China
4 shared publications - Liang Wen
Army Engineering University of PLA
3 shared publications - Chiming Guo
Army Engineering University of PLA, Shijiazhuang 050003, China
2 shared publications - Huajun Bai
Shijiazhuang Campus, Army Engineering University of PLA, Shijiazhuang 050003, China
2 shared publications
Latest Publications
- Open Access
An Improved Fault Diagnosis Method for Diesel Engines Based on Optimized Variational Mode Decomposition and Transformer-SVM
Due to the non-stationary and nonlinear characteristics of diesel engine vibration signals, fault features cannot be fully extracted, which limits fault diagnosis performance. To address this issue, an improved fault diagnosis method combining optimized Variational Mode Decomposition with a Transformer and Support Vector Machine is proposed. An improved dung beetle optimization algorithm is employed to obtain optimal parameters for Variational Mode Decomposition. The envelope entropy minimization principle is applied to select the optimal intrinsic mode functions after Variational Mode Decomposition, achieving signal denoising. Analysis of variance is integrated for feature significance testing to screen critical features. The selected features are fed into a Transformer network for training. At the final classification stage, the traditional SoftMax classifier is replaced with a Support Vector Machine classifier.
Open AccessAn Improved Fault Diagnosis Method for Diesel Engines Based on Optimized Variational Mode Decomposition and Transformer-SVM
Due to the non-stationary and nonlinear characteristics of diesel engine vibration signals, fault features cannot be fully extracted, which limits fault diagnosis performance. To address this issue, an improved fault diagnosis method combining optimized Variational Mode Decomposition with a Transformer and Support Vector Machine is proposed. An improved dung beetle optimization algorithm is employed to obtain optimal parameters for Variational Mode Decomposition. The envelope entropy minimization principle is applied to select the optimal intrinsic mode functions after Variational Mode Decomposition, achieving signal denoising. Analysis of variance is integrated for feature significance testing to screen critical features. The selected features are fed into a Transformer network for training. At the final classification stage, the traditional SoftMax classifier is replaced with a Support Vector Machine classifier.
- 26 August 2023
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 25 (4)
A novel method of health indicator construction and remaining useful life prediction based on deep learning
The construction of health indicators (HI) for traditional deep learning requires human training labels and poor interpretability. This paper proposes an HI construction method based on Stacked Sparse Autoencoder (SSAE) and combines SSAE with Long short-term memory (LSTM) network to predict the remaining useful life (RUL). Extracting features from a single domain may result in insufficient feature extraction and cannot comprehensively reflect the degradation status information of mechanical equipment. In order to solve the problem, this article extracts features from time domain, frequency domain, and time-frequency domain to construct a comprehensive original feature set. Based on monotonicity, trendiness, and robustness, the most sensitive features from the original feature set are selected and put into the SSAE network to construct HI for state partitioning, and then LSTM is used for RUL prediction. By comparing with the existing methods, it is proved that the prediction effect of the proposed method in this paper is satisfied.
- 26 August 2023
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 25 (4)
A novel method of health indicator construction and remaining useful life prediction based on deep learning
The construction of health indicators (HI) for traditional deep learning requires human training labels and poor interpretability. This paper proposes an HI construction method based on Stacked Sparse Autoencoder (SSAE) and combines SSAE with Long short-term memory (LSTM) network to predict the remaining useful life (RUL). Extracting features from a single domain may result in insufficient feature extraction and cannot comprehensively reflect the degradation status information of mechanical equipment. In order to solve the problem, this article extracts features from time domain, frequency domain, and time-frequency domain to construct a comprehensive original feature set. Based on monotonicity, trendiness, and robustness, the most sensitive features from the original feature set are selected and put into the SSAE network to construct HI for state partitioning, and then LSTM is used for RUL prediction. By comparing with the existing methods, it is proved that the prediction effect of the proposed method in this paper is satisfied.
- Open Access
A Study of a Domain-Adaptive LSTM-DNN-Based Method for Remaining Useful Life Prediction of Planetary Gearbox
Remaining Useful Life (RUL) prediction is an important component of failure prediction and health management (PHM). Current life prediction studies require large amounts of tagged training data assuming that the training data and the test data follow a similar distribution. However, the RUL-prediction data of the planetary gearbox, which works in different conditions, will lead to statistical differences in the data distribution. In addition, the RUL-prediction accuracy will be affected seriously. In this paper, a planetary transmission test system was built, and the domain adaptive model was used to Implement the transfer learning (TL) between the planetary transmission system in different working conditions. LSTM-DNN network was used in the data feature extraction and regression analysis. Finally, a domain-adaptive LSTM-DNN-based method for remaining useful life prediction of Planetary Transmission was proposed. The experimental results show that not only the impact of different operating conditions on statistical data was reduced effectively, but also the efficiency and accuracy of RUL prediction improved.
Open AccessA Study of a Domain-Adaptive LSTM-DNN-Based Method for Remaining Useful Life Prediction of Planetary Gearbox
Remaining Useful Life (RUL) prediction is an important component of failure prediction and health management (PHM). Current life prediction studies require large amounts of tagged training data assuming that the training data and the test data follow a similar distribution. However, the RUL-prediction data of the planetary gearbox, which works in different conditions, will lead to statistical differences in the data distribution. In addition, the RUL-prediction accuracy will be affected seriously. In this paper, a planetary transmission test system was built, and the domain adaptive model was used to Implement the transfer learning (TL) between the planetary transmission system in different working conditions. LSTM-DNN network was used in the data feature extraction and regression analysis. Finally, a domain-adaptive LSTM-DNN-based method for remaining useful life prediction of Planetary Transmission was proposed. The experimental results show that not only the impact of different operating conditions on statistical data was reduced effectively, but also the efficiency and accuracy of RUL prediction improved.
- Open Access
Gearbox Fault Diagnosis Based on Optimized Stacked Denoising Auto Encoder and Kernel Extreme Learning Machine
The gearbox is one of the key components of many large mechanical transmission devices. Due to the complex working environment, the vibration signal stability of the gear box is poor, the fault feature extraction is difficult, and the fault diagnosis accuracy makes it difficult to meet the expected requirements. To solve this problem, this paper proposes a gearbox fault diagnosis method based on an optimized stacked denoising auto encoder (SDAE) and kernel extreme learning machine (KELM). Firstly, the particle swarm optimization algorithm in adaptive weight (SAPSO) was adopted to optimize the SDAE network structure, and the number of hidden layer nodes, learning rate, noise addition ratio and iteration times were adaptively obtained to make SDAE obtain the best network structure. Then, the best SDAE network structure was used to extract the deep feature information of weak faults in the original signal. Finally, the extracted fault features are fed into KELM for fault classification. Experimental results show that the classification accuracy of the proposed method can reach 97.2% under the condition of low signal-to-noise ratio, which shows the effectiveness and robustness of the proposed method compared with other diagnostic methods.
Open AccessGearbox Fault Diagnosis Based on Optimized Stacked Denoising Auto Encoder and Kernel Extreme Learning Machine
The gearbox is one of the key components of many large mechanical transmission devices. Due to the complex working environment, the vibration signal stability of the gear box is poor, the fault feature extraction is difficult, and the fault diagnosis accuracy makes it difficult to meet the expected requirements. To solve this problem, this paper proposes a gearbox fault diagnosis method based on an optimized stacked denoising auto encoder (SDAE) and kernel extreme learning machine (KELM). Firstly, the particle swarm optimization algorithm in adaptive weight (SAPSO) was adopted to optimize the SDAE network structure, and the number of hidden layer nodes, learning rate, noise addition ratio and iteration times were adaptively obtained to make SDAE obtain the best network structure. Then, the best SDAE network structure was used to extract the deep feature information of weak faults in the original signal. Finally, the extracted fault features are fed into KELM for fault classification. Experimental results show that the classification accuracy of the proposed method can reach 97.2% under the condition of low signal-to-noise ratio, which shows the effectiveness and robustness of the proposed method compared with other diagnostic methods.
- Open Access
- 4 May 2023
- Published by MDPI AG in Preprints.org
Gearbox Fault Diagnosis Based on Optimized Stacked Denoising Auto Encoder and Kernel Extreme Learning Machine
In a complex working environment, the fault signal of the gearbox is greatly affected by the outside world, and fault feature recognition is difficult, so the fault diagnosis accuracy is difficult to meet the expected requirements. To solve this problem, this paper proposes a gearbox fault diagnosis method based on an optimized stacked denoising auto encoder (SDAE) and kernel extreme learning machine (KELM). Firstly, the Particle Swarm Optimization algorithm in Adaptive Weight (SAPSO) was adopted to optimize the SDAE network structure, and the number of hidden layer nodes, learning rate, noise addition ratio and iteration times were adaptively obtained to make SDAE obtain the best network structure. Then, the best SDAE network structure was used to extract the deep feature information of weak faults in the original signal. Finally, the extracted fault features are fed into KELM for fault classification. Experimental results show that, compared with existing commonly used methods of fault diagnosis, the fault diagnosis model proposed in this paper can reduce the influence of noise in the original signal can better learn the deep-level features in the original signal and has higher diagnosis accuracy, faster diagnosis speed and good generalization in fault diagnosis.
- 4 May 2023
- Published by MDPI AG in Preprints.org
Open AccessGearbox Fault Diagnosis Based on Optimized Stacked Denoising Auto Encoder and Kernel Extreme Learning Machine
In a complex working environment, the fault signal of the gearbox is greatly affected by the outside world, and fault feature recognition is difficult, so the fault diagnosis accuracy is difficult to meet the expected requirements. To solve this problem, this paper proposes a gearbox fault diagnosis method based on an optimized stacked denoising auto encoder (SDAE) and kernel extreme learning machine (KELM). Firstly, the Particle Swarm Optimization algorithm in Adaptive Weight (SAPSO) was adopted to optimize the SDAE network structure, and the number of hidden layer nodes, learning rate, noise addition ratio and iteration times were adaptively obtained to make SDAE obtain the best network structure. Then, the best SDAE network structure was used to extract the deep feature information of weak faults in the original signal. Finally, the extracted fault features are fed into KELM for fault classification. Experimental results show that, compared with existing commonly used methods of fault diagnosis, the fault diagnosis model proposed in this paper can reduce the influence of noise in the original signal can better learn the deep-level features in the original signal and has higher diagnosis accuracy, faster diagnosis speed and good generalization in fault diagnosis.
- Open Access
Intelligent Fault Diagnosis Method for Gearboxes Based on Deep Transfer Learning
The complex operating environment of gearboxes and the easy interference of early fault feature information make fault identification difficult. This paper proposes a fault diagnosis method based on a combination of whale optimization algorithm (WOA), variational mode decomposition (VMD), and deep transfer learning. First, the VMD is optimized by using the WOA, and the minimum sample entropy is used as the fitness function to solve for the K value and penalty parameter α corresponding to the optimal decomposition of the VMD, and the correlation coefficient is used to reconstruct the signal. Second, the reconstructed signal after reducing noise is used to generate a two-dimensional image using the continuous wavelet transform method as the transfer learning target domain data. Finally, the AlexNet model is used as the transfer object, which is pretrained and fine-tuned with model parameters to make it suitable for early crack fault diagnosis in gearboxes. The experimental results show that the method proposed in this paper can effectively reduce the noise of gearbox vibration signals under a complex working environment, and the fault diagnosis method of using transfer learning is effective and achieves high accuracy of fault diagnosis.
Open AccessIntelligent Fault Diagnosis Method for Gearboxes Based on Deep Transfer Learning
The complex operating environment of gearboxes and the easy interference of early fault feature information make fault identification difficult. This paper proposes a fault diagnosis method based on a combination of whale optimization algorithm (WOA), variational mode decomposition (VMD), and deep transfer learning. First, the VMD is optimized by using the WOA, and the minimum sample entropy is used as the fitness function to solve for the K value and penalty parameter α corresponding to the optimal decomposition of the VMD, and the correlation coefficient is used to reconstruct the signal. Second, the reconstructed signal after reducing noise is used to generate a two-dimensional image using the continuous wavelet transform method as the transfer learning target domain data. Finally, the AlexNet model is used as the transfer object, which is pretrained and fine-tuned with model parameters to make it suitable for early crack fault diagnosis in gearboxes. The experimental results show that the method proposed in this paper can effectively reduce the noise of gearbox vibration signals under a complex working environment, and the fault diagnosis method of using transfer learning is effective and achieves high accuracy of fault diagnosis.
- Open Access
Combination of VMD Mapping MFCC and LSTM: A New Acoustic Fault Diagnosis Method of Diesel Engine
Diesel engines have a wide range of functions in the industrial and military fields. An urgent problem to be solved is how to diagnose and identify their faults effectively and timely. In this paper, a diesel engine acoustic fault diagnosis method based on variational modal decomposition mapping Mel frequency cepstral coefficients (MFCC) and long-short-term memory network is proposed. Variational mode decomposition (VMD) is used to remove noise from the original signal and differentiate the signal into multiple modes. The sound pressure signals of different modes are mapped to the Mel filter bank in the frequency domain, and then the Mel frequency cepstral coefficients of the respective mode signals are calculated in the mapping range of frequency domain, and the optimized Mel frequency cepstral coefficients are used as the input of long and short time memory network (LSTM) which is trained and verified, and the fault diagnosis model of the diesel engine is obtained. The experimental part compares the fault diagnosis effects of different feature extraction methods, different modal decomposition methods and different classifiers, finally verifying the feasibility and effectiveness of the method proposed in this paper, and providing solutions to the problem of how to realise fault diagnosis using acoustic signals.
Open AccessCombination of VMD Mapping MFCC and LSTM: A New Acoustic Fault Diagnosis Method of Diesel Engine
Diesel engines have a wide range of functions in the industrial and military fields. An urgent problem to be solved is how to diagnose and identify their faults effectively and timely. In this paper, a diesel engine acoustic fault diagnosis method based on variational modal decomposition mapping Mel frequency cepstral coefficients (MFCC) and long-short-term memory network is proposed. Variational mode decomposition (VMD) is used to remove noise from the original signal and differentiate the signal into multiple modes. The sound pressure signals of different modes are mapped to the Mel filter bank in the frequency domain, and then the Mel frequency cepstral coefficients of the respective mode signals are calculated in the mapping range of frequency domain, and the optimized Mel frequency cepstral coefficients are used as the input of long and short time memory network (LSTM) which is trained and verified, and the fault diagnosis model of the diesel engine is obtained. The experimental part compares the fault diagnosis effects of different feature extraction methods, different modal decomposition methods and different classifiers, finally verifying the feasibility and effectiveness of the method proposed in this paper, and providing solutions to the problem of how to realise fault diagnosis using acoustic signals.