ASApidej Sakulneya

Apidej Sakulneya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Apidej Sakulneya has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enhancing Pavement-Encoded Signages for Precise Driving Automation

    by Apidej Sakulneya, Pengyuan Liu, Chun-Chien Hsiao, Alireza Talebpour, Jeffery Roesler

    A field study was developed combining an automated driving system (ADS) vehicle and magnetometer-based sensing system to test the detectability, repeatability, and reliability of pavement encoded electromagnetic (EM) strips placed on the surface of concrete and asphalt pavement. The objective was to define the EM strips’ patterns, lateral vehicle position, and speed accuracy at several vehicle speeds (15 to 55 mph) and weather conditions on a closed traffic concrete pad and a low-volume rural road. The closed area concrete pad consisted of two test segments that evaluated construction work zone warning patterns, lane shifting, lateral vehicle position, vehicle speed, and unsignalized intersection stop warning pattern with the ADS vehicle testing conducted between 25 and 55 mph. The second test section on a rural road placed 36 longitudinal EM strips spaced at 15 and 20 ft on a tangent and horizontal curve, respectively. The vehicle traversed this section in several weather conditions (normal, snow, ice) and compared its lateral position and speed to a camera-based ground truth measure and GPS speed indicator. The refined signal-processing algorithms enabled reliable and repeatable detection of the EM strips when the minimum signal threshold was set to 30 nT/ms. To minimize the effects of electromagnetic interference from the ADS vehicle, two bandpass filtering configurations were employed successfully with 15–55 Hz for < 35 mph and 20–80 Hz for > 35 mph along with a notch filter at 60 Hz to remove adjacent powerline noise. A noise rejection framework was deployed based on top-row sensor coincidence screening, which filtered out disturbances from embedded ferromagnetic elements in or near the pavement. With the V2I EM strips, sensors, and filtering system refined, more than 90% of the EM strips were detected in all weather conditions. For the rural road section, the mean lateral position accuracy varied between 1.3 to 2.6 in. for all weather conditions, while the difference in calculated and GPS speed was < 1 mph. The new signal-processing enhancements and testing at various speeds confirmed the V2I system is detectable, interpretable, and repeatable, which can now lead to additional V2I testing in more complex testing configurations and sites.

  • Field and Lab Evaluation of Compacted Concrete Pavement Mixtures

    by University of Illinois Urbana-Champaign, Jeffery Roesler, Jordan Ouellet, Apidej Sakulneya, Jesús Castro Pérez, Richa Bhardwaj

    This research evaluated compacted concrete pavement (CCP) constructed on a local road in Jerseyville, Illinois, and developed a future CCP mix based on a recently proposed roller-compacted concrete (RCC) mix design process using a gyratory compactor. The Jerseyville evaluation provided valuable insights into the batching, hauling, paving, compacting, finishing, and sawing of a pilot CCP project. Specifically, the effects of aggregate packing and fines content on mixture behavior revealed potential areas for improvement in compaction efficiency and strength performance. Furthermore, managing specific construction activities like type and minimum weight of roller compactors, maximum haul time, and moisture management of the CCP can positively impact the field compactability. Lab batching of the Jerseyville constituents using the field batch proportions showed that increasing the voids filled with paste (VFP) could significantly reduce the compaction effort required. A proposed CCP mixture was developed for future use at the Illinois Certification and Research Track (ICART) facility using local Trenton aggregates and a performance-based volumetric design methodology. The four mixtures cast and tested showed that a VFP of 112% with the three-aggregate blend provided the best balance across six key performance categories (paveability, compactability, stability, finishability, strength, sustainability), leading to its recommendation as a suitable starting point for the field CCP mixture.

  • Passive Sensing Communication to Vehicles in Construction Work Zones through Signage Coded on Pavement Surface

    by Apidej Sakulneya, Jeffery Raphael Roesler

    Construction work zones (CWZ) present safety challenges because of speeding, distracted driving, and improper lane changes. The objective of this research was to enhance CWZ communication and safety for vehicles through pavement signage coded on the road surface. First, an electromagnetic (EM) signature was applied to a pavement surface through a process of magnetizing epoxy-encapsulated chromium dioxide (CrO 2 ) particles. Next, a 3-axis magnetometer array was mounted on a cart to detect the passive EM signature strips and interpret the cart’s speed or upcoming lane maneuvers based on the collected EM signals. Field experiments were conducted in a parking lot with pavement-placed EM strips and a cart equipped with a magnetometer sensor array to demonstrate the CWZ concept. Test case#1 had EM signature strips at a 90° inclination and successfully determined the cart speed by dividing the fixed EM strip spacing by the time between peak signal pulses. Test case#2 with EM strips at 90° and 60° orientations validated the passive sensor system identification of speed and lane-merge action. Differences between the peak response times from magnetometer sensors on the cart’s left, center, and right determined the direction of the upcoming lane merge. The introduction of 3-axis magnetometers improved the data available to calculate and verify speed and maneuver actions by having redundant sensors containing similar interpretation of speed or maneuver action. The study confirmed that pavement signage coded roads and magnetometer array on a vehicle can effectively predict speeds and upcoming maneuvering actions, which should improve overall driver safety and mobility through CWZs.

  • Smart Construction Work-Zone Safety with V2I Passive Material Sensing

    by University of Illinois Urbana-Champaign, Apidej Sakulneya, Jeffery Roesler

    This study explored new vehicle to infrastructure (V2I) technology in construction work zones (CWZ), where speeding, unsafe driving behaviors, and drivers' failure to obey traffic signs contribute significantly to elevated accident rates and fatalities. The objective of this research to advance CWZ safety by evaluating the potential of 3-axis magnetometers attached to a moving cart and traversing over a pavement-assisted passive sensing system can improve vehicle lateral positioning and warning in CWZ. Secondly, to develop a process to implement a programmable ferromagnetic oxide material for roadway coatings to interface with vehicles containing magnetometers on a field site. The research testing used a custom-built cart equipped with multiple 3-axis magnetometer to detect EM signals from invisible markings composed of 10% and 20% CrO₂, that were created to alert for speed, lane merges, and lane-keeping. The invisible marking strips were oriented and positioned in various ways to test the repeatability and ability to reliable detect a signal and signature that could be interpreted with automated algorithm. The experimental test results were acquired in a parking and signal-processing technique was established that normalized the raw signals, removed background EM signals not related to the created EM signatures, filtered high- and low-frequency noise, and took the derivative of the EM flux density with respect to the number of points. The V2I signals in the Y and Z-axes occasionally failed to exceed the minimum threshold set for the experiments, but the X-axis signals consistently exceeded the minimum value of ±200nT throughout the testing. The minimum threshold signals were used to calculate the speed of the cart, indicate a lane merge, and determine the lateral lane position of the cart. The detected speed signals closely correlated with the GPS speed measurements on the cart as well as provided accurate cart positioning and maneuvering actions. This pilot study demonstrated the potential of V2I communication specifically EM pavement signatures to enhance CWZ safety and provide detectable and actionable feedback to the vehicle.


  • Enhancing Safety in Construction Work Zones Through Concrete Pavement-Embedded Passive Sensing Technologies

    by Apidej Sakulneya, Jeffery Roesler

    Construction work zones on roadways pose significant risks for drivers and construction workers. Maintaining driver attention, reducing vehicle speeds, and providing advanced lane closure warnings is crucial for mitigating accident risks. This research study focuses on developing passive sensors that are embedded in concrete pavement to alert, maneuver vehicles, and reduce speeds in construction work zones. This electromagnetic sensor system, embedded in the concrete pavement, will alert vehicles to lane closures, provide actual to posted speed levels, provide lane departure assistance, and help maneuver vehicles safely through the construction zone. The new passive sensing system takes advantage of recent V2I technologies that enable active communication and engagement of the driver. The proposed passive sensing approach is still used in conjunction with traditional work zone signage and pavement markings to maximize safety.

  • Effect of Fibers in Compaction Energy and Mechanical Properties of Fiber-Reinforced Roller Compacted Concrete

    by Jesús Castro Pérez, Jeffery Roesler, Apidej Sakulneya, Johann Cárdenas

    Roller compacted concrete (RCC) is a concrete mixture characterized by a low cementitious paste content that requires external compaction energy, i.e., rollers for pavements and mechanical hammers for beam and cylinder specimens. The addition of fibers to conventional concrete has been shown to increase the flexural slab capacity and extend the cracking life. The objective of this study is to quantify how several fiber types impact the compactability and green strength of RCC at various elapse times after initial mixing.

  • Enhancing Construction Work-Zone Safety by Passive Pavement-to-Vehicle Communication

    by University of Illinois Urbana-Champaign, Apidej Sakulneya, Jeffery Roesler

    Construction work zones for roads pose significant safety challenges for drivers and workers, which can lead to accidents, injuries, fatalities, and property damage. Enhancing construction work-zone safety requires an understanding of the factors influencing accidents and fatalities and an evaluation of existing safety and traffic-management measures. The objective of this study was to improve work-zone safety for roadways, by connecting passive material sensing in the road with vehicle communication systems. A review of the main roadway work-zone safety literature found driver behavior, traffic congestion, and signage effectiveness to be the most significant factors. Vehicle speed, type of vehicles, type of collisions, and environmental conditions were found to have the most impact on the fatality rate in work zones. Past attempts to improve work-zone safety include adding rumble strips, more warning signs, and implementing smart-work-zone (SWZ) technologies. SWZ communication in-vehicle was found to reduce traffic speeds and promote faster and more consistent merging in the work-zone transition area. Pavement-assisted passive sensing, coupled with vehicle-to-infrastructure (V2I) communication, may offer enhanced in-vehicle speed and lane-merge warnings, which could improve driver awareness, reduce vehicle speeds, and improve work-zone safety. A laboratory-based experiment was developed to validate the theoretical configurations of smart work zones (SWZ) using passive pavement sensing, with the objective being to determine suitable spacings and inclination angles for the electromagnetic (EM) strips as speed and lane-merge warning systems, respectively. The experimental results revealed that these EM strips can estimate vehicle speed with sufficient accuracy, and the spacing of the EM-sensing strips influences the signal intensity. Additionally, the spacing and inclination angle of the EM strips influence the captured signals. This lab pilot study clearly demonstrated the potential of EM-based strips in enhancing speed and lane-merge warning systems using V2I technology for improved safety in roadway work zones.