Kuen-Lin Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kuen-Lin Chen has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Chiu-Hsien Wu
National Chung Hsing University
6 shared publications Herng-Er Horng
Institute of Electro-Optical Science and Technology, National Taiwan Normal University, Taipei, Taiwan
4 shared publicationsJian-Ming Chen
Institute of Nanoscience, National Chung Hsing University, Taichung, Taiwan
4 shared publications- Li Min Wang
National Taiwan University
4 shared publications Li-Min Wang
Graduate Institute of Applied Physics, National Taiwan University, Taipei, Taiwan
4 shared publications- Shu-Hsien Liao
Institute of Electro-Optical Science and Technology, National Taiwan Normal University, Taipei, Taiwan
4 shared publications
Latest Publications
- 1 August 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (8) , 085009
Junction formation in FIB-processed YBCO governed by lattice distortion
Focused ion beam (FIB) processing is widely used to define nanoscale weak links and Josephson junctions in YBa 2 Cu 3 O 7− x (YBCO). However, the specific thickness window required for junction behavior and its microscopic origin remain unclear, particularly the distinction between Ga-ion doping and lattice distortion effects. We performed transport measurements on FIB-patterned YBCO nanobridges and investigated the recovery of Tc through post-annealing. To identify the underlying electronic modification, we employed density-functional theory (DFT) to calculate the hopping parameters and bandwidth changes in distorted YBCO crystal structures. Our measurements show that FIB-induced Tc suppression is partially reversible through annealing, indicating that lattice distortion is the dominant factor in weak-link formation rather than irreversible Ga incorporation. DFT calculations reveal that while distortion significantly reduces the bandwidth and secondary hopping, the primary Cu–Oelectronic coupling channel remains functional. These results support an S–S’–S-like weak-link model, where the superconducting order parameter is locally suppressed while sufficient electronic coupling is preserved. This study provides a microscopic framework for understanding and optimizing the formation of Josephson junctions in FIB-patterned high-Tc superconductors.
- 1 August 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (8) , 085009
Junction formation in FIB-processed YBCO governed by lattice distortion
Focused ion beam (FIB) processing is widely used to define nanoscale weak links and Josephson junctions in YBa 2 Cu 3 O 7− x (YBCO). However, the specific thickness window required for junction behavior and its microscopic origin remain unclear, particularly the distinction between Ga-ion doping and lattice distortion effects. We performed transport measurements on FIB-patterned YBCO nanobridges and investigated the recovery of Tc through post-annealing. To identify the underlying electronic modification, we employed density-functional theory (DFT) to calculate the hopping parameters and bandwidth changes in distorted YBCO crystal structures. Our measurements show that FIB-induced Tc suppression is partially reversible through annealing, indicating that lattice distortion is the dominant factor in weak-link formation rather than irreversible Ga incorporation. DFT calculations reveal that while distortion significantly reduces the bandwidth and secondary hopping, the primary Cu–Oelectronic coupling channel remains functional. These results support an S–S’–S-like weak-link model, where the superconducting order parameter is locally suppressed while sufficient electronic coupling is preserved. This study provides a microscopic framework for understanding and optimizing the formation of Josephson junctions in FIB-patterned high-Tc superconductors.
- Open Access
- 30 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (3) , 188
Defect Passivation and Enhanced Hole Extraction in Inverted Perovskite Solar Cells via CeO2@MoS2 Interfacial Engineering
Nanomaterial-based hole transport layers (HTLs) play a vital role in regulating interfacial charge extraction and recombination in perovskite solar cells (PSCs). To improve PSC efficiency, hydrothermally synthesized CeO2@MoS2 nanocomposites (CM NCs) were incorporated as an interfacial buffer layer into a NiOX/MeO-2PACz HTL. The introduction of CM NCs induces strong interfacial interactions, where Mo sites in MoS2 interact with NiOX, modulating the Ni2+/Ni3+ ratio and reducing the interfacial trap density. Moreover, CeO2 promotes the formation of oxygen vacancies, collectively improving the conductivity and hole transport capability of the NiOX HTL. The MoS2-grafted CeO2 interlayer effectively tailors the interfacial energetics and creates an effective channel for hole transfer, thereby reducing open-circuit voltage (VOC) loss and enhancing device performance. This interface modification efficiently enhances hole extraction, and non-radiative recombination is effectively suppressed at the NiOX/MeO-2PACz/perovskite interface. Thereby, incorporating 2 vol% CM NCs into PSCs achieved a power conversion efficiency (PCE) of 17.93%, compared to 17.50% for a 1 vol% CM NCs-based device and 17.01% for the unmodified control device. The enhanced performance at the optimized CM NCs concentration is attributed to effective defect passivation, reduced VOC loss, and improved interfacial band alignment, which together facilitate hole extraction and suppress non-radiative recombination. However, excessive CM NCs incorporation (4 vol%) leads to increased interfacial resistance, partial hole blocking effects associated with the n-type nature of CeO2, and aggravated recombination, resulting in degraded device performance. These results demonstrate that precise control over CM NCs interlayer thickness and concentration is critical for maximizing device performance, providing a robust strategy for designing high-efficiency and stable NiOX-based PSCs and advancing nanocomposite-enabled interfacial engineering for photovoltaic applications.
- 30 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (3) , 188
Open AccessDefect Passivation and Enhanced Hole Extraction in Inverted Perovskite Solar Cells via CeO2@MoS2 Interfacial Engineering
Nanomaterial-based hole transport layers (HTLs) play a vital role in regulating interfacial charge extraction and recombination in perovskite solar cells (PSCs). To improve PSC efficiency, hydrothermally synthesized CeO2@MoS2 nanocomposites (CM NCs) were incorporated as an interfacial buffer layer into a NiOX/MeO-2PACz HTL. The introduction of CM NCs induces strong interfacial interactions, where Mo sites in MoS2 interact with NiOX, modulating the Ni2+/Ni3+ ratio and reducing the interfacial trap density. Moreover, CeO2 promotes the formation of oxygen vacancies, collectively improving the conductivity and hole transport capability of the NiOX HTL. The MoS2-grafted CeO2 interlayer effectively tailors the interfacial energetics and creates an effective channel for hole transfer, thereby reducing open-circuit voltage (VOC) loss and enhancing device performance. This interface modification efficiently enhances hole extraction, and non-radiative recombination is effectively suppressed at the NiOX/MeO-2PACz/perovskite interface. Thereby, incorporating 2 vol% CM NCs into PSCs achieved a power conversion efficiency (PCE) of 17.93%, compared to 17.50% for a 1 vol% CM NCs-based device and 17.01% for the unmodified control device. The enhanced performance at the optimized CM NCs concentration is attributed to effective defect passivation, reduced VOC loss, and improved interfacial band alignment, which together facilitate hole extraction and suppress non-radiative recombination. However, excessive CM NCs incorporation (4 vol%) leads to increased interfacial resistance, partial hole blocking effects associated with the n-type nature of CeO2, and aggravated recombination, resulting in degraded device performance. These results demonstrate that precise control over CM NCs interlayer thickness and concentration is critical for maximizing device performance, providing a robust strategy for designing high-efficiency and stable NiOX-based PSCs and advancing nanocomposite-enabled interfacial engineering for photovoltaic applications.
- Open Access
- 2 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 7508-7520
γ-Graphyne as a Functional 2D Nanoarchitectonics for Room-Temperature Chemiresistive–Potentiometric Sensing Interfaces
The development of highly selective gas sensors operating at room temperature with detection capabilities in the parts-per-billion (ppb) range is one of fundamental and technological interest across diverse fields. Conventional sensor arrays often suffer from signal instability, large device footprints, and high fabrication costs. The emergence of two-dimensional (2D) materials has enabled new paradigms in chemiresistive sensing, leveraging their quantum confinement, high surface-to-volume ratio, and tunable electronic structure. In this study, we present, for the first time, a high-performance chemiresistive sensor based on chemically exfoliated γ-graphyne, a carbon allotrope with sp-sp2-hybridized bonding and an extended π-conjugated system. The material's cross-linked layered structure introduces spatially varying local potential gradients, which enhance charge carrier modulation upon gas molecule adsorption. First-principles density functional theory (DFT) calculations were employed to optimize the graphyne synthesis pathway and to model adsorption energies and charge transfer dynamics. Real-time detection of NO2 gas at room temperature demonstrates exceptional sensor performance, with a measured response of 1.05 at 25 ppb and an estimated detection limit as low as 0.45 ppb. The device exhibits rapid response (53 s) and recovery (185 s) times, governed by gas-adsorbate interactions and carrier scattering mechanisms. Theoretical models reveal that adsorption of NO2 induces significant modulation of the local density of states and carrier concentration in graphyne, enhancing its chemiresistive response. Furthermore, we integrated machine learning algorithms with the experimental sensor output to establish a robust gas classification framework. Classifiers trained on sensor data exhibit 100% accuracy across varying concentrations (15-100 ppb) of NO2 and high selectivity for other interfering gases, validating the discriminatory power of the sensor. This synergistic approach combining quantum mechanical modeling, charge transport physics, and data-driven learning algorithms opens new avenues for designing next-generation miniaturized gas sensors with ultrahigh sensitivity and selectivity.
- 2 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 7508-7520
Open Accessγ-Graphyne as a Functional 2D Nanoarchitectonics for Room-Temperature Chemiresistive–Potentiometric Sensing Interfaces
The development of highly selective gas sensors operating at room temperature with detection capabilities in the parts-per-billion (ppb) range is one of fundamental and technological interest across diverse fields. Conventional sensor arrays often suffer from signal instability, large device footprints, and high fabrication costs. The emergence of two-dimensional (2D) materials has enabled new paradigms in chemiresistive sensing, leveraging their quantum confinement, high surface-to-volume ratio, and tunable electronic structure. In this study, we present, for the first time, a high-performance chemiresistive sensor based on chemically exfoliated γ-graphyne, a carbon allotrope with sp-sp2-hybridized bonding and an extended π-conjugated system. The material's cross-linked layered structure introduces spatially varying local potential gradients, which enhance charge carrier modulation upon gas molecule adsorption. First-principles density functional theory (DFT) calculations were employed to optimize the graphyne synthesis pathway and to model adsorption energies and charge transfer dynamics. Real-time detection of NO2 gas at room temperature demonstrates exceptional sensor performance, with a measured response of 1.05 at 25 ppb and an estimated detection limit as low as 0.45 ppb. The device exhibits rapid response (53 s) and recovery (185 s) times, governed by gas-adsorbate interactions and carrier scattering mechanisms. Theoretical models reveal that adsorption of NO2 induces significant modulation of the local density of states and carrier concentration in graphyne, enhancing its chemiresistive response. Furthermore, we integrated machine learning algorithms with the experimental sensor output to establish a robust gas classification framework. Classifiers trained on sensor data exhibit 100% accuracy across varying concentrations (15-100 ppb) of NO2 and high selectivity for other interfering gases, validating the discriminatory power of the sensor. This synergistic approach combining quantum mechanical modeling, charge transport physics, and data-driven learning algorithms opens new avenues for designing next-generation miniaturized gas sensors with ultrahigh sensitivity and selectivity.
- Open Access
- 10 July 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (14) , 1175
Enhancing Power Conversion Efficiency of Organic Solar Cells with Magnetoplasmonic Fe3O4@Au@m-ABS Nanoparticles
Organic–inorganic nanocomposites have the potential to be used in photovoltaic materials due to their eco-friendliness, suitable band gaps, and high stability. In this work, we integrated gold and Fe3O4 magnetic nanoparticles with poly-m-amino benzene sulfonic (m-ABS) to synthesize Fe3O4@Au@poly-(m-aminobenzenesulfonic acid) (Fe3O4@Au@m-ABS) magneto-plasmonic nanoparticles (MPNPs) to enhance the performance of the organic photovoltaic (OPV). These MPNPs exhibit broad UV-Vis absorption and a low band gap of 2.878 eV, enhancing their suitability for photovoltaic applications. The MPNPs were introduced into the ZnO electron transporting layer (ETL) and active layer to investigate the influence of MPNPs on the power conversion efficiency (PCE) of the OPVs. When 0.1 vol% MPNPs were incorporated in the ETL, the OPVs achieved a PCE of 14.24% and a fill factor (FF) of 69.10%. On the other hand, when 0.1 vol% MPNPs were incorporated in the active layer, the OPVs showed a PCE of 14.11% and an FF of 68.83%. However, the OPVs without MPNPs only possessed a PCE of 13.15% and an FF of 63.69%. The incorporation of MPNPs increased the PCE by 8.3% in the OPV device. These findings suggest that Fe3O4@Au@m-ABS MPNPs are promising nanocomposite materials for enhancing the performance of OPVs.
- 10 July 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (14) , 1175
Open AccessEnhancing Power Conversion Efficiency of Organic Solar Cells with Magnetoplasmonic Fe3O4@Au@m-ABS Nanoparticles
Organic–inorganic nanocomposites have the potential to be used in photovoltaic materials due to their eco-friendliness, suitable band gaps, and high stability. In this work, we integrated gold and Fe3O4 magnetic nanoparticles with poly-m-amino benzene sulfonic (m-ABS) to synthesize Fe3O4@Au@poly-(m-aminobenzenesulfonic acid) (Fe3O4@Au@m-ABS) magneto-plasmonic nanoparticles (MPNPs) to enhance the performance of the organic photovoltaic (OPV). These MPNPs exhibit broad UV-Vis absorption and a low band gap of 2.878 eV, enhancing their suitability for photovoltaic applications. The MPNPs were introduced into the ZnO electron transporting layer (ETL) and active layer to investigate the influence of MPNPs on the power conversion efficiency (PCE) of the OPVs. When 0.1 vol% MPNPs were incorporated in the ETL, the OPVs achieved a PCE of 14.24% and a fill factor (FF) of 69.10%. On the other hand, when 0.1 vol% MPNPs were incorporated in the active layer, the OPVs showed a PCE of 14.11% and an FF of 68.83%. However, the OPVs without MPNPs only possessed a PCE of 13.15% and an FF of 63.69%. The incorporation of MPNPs increased the PCE by 8.3% in the OPV device. These findings suggest that Fe3O4@Au@m-ABS MPNPs are promising nanocomposite materials for enhancing the performance of OPVs.
- Open Access
- 28 August 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (9)
Enhanced tunable terahertz Mie resonance and magnetoplasmonic effect through chain formation in ferrofluid
We present experimental and theoretical evidence demonstrating the Mie resonance effect in the terahertz (THz) range, utilizing Fe3O4/Kerosene ferrofluid. Our findings indicate a significant and rapid change in the complex refractive indices at 0.5 THz with an increase in the magnetic field strength. Moreover, we observed a prominent absorption peak at 0.5 THz in transmittance and absorption coefficient measurements, corresponding to a magnetic field intensity of 178.0 mT. This phenomenon occurs due to the adjustment of particle spacing, leading to resonance under different magnetic field conditions. These research results hold immense potential in advancing the development of magneto-optical THz modulators for imaging and communication applications.
- 28 August 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (9)
Open AccessEnhanced tunable terahertz Mie resonance and magnetoplasmonic effect through chain formation in ferrofluid
We present experimental and theoretical evidence demonstrating the Mie resonance effect in the terahertz (THz) range, utilizing Fe3O4/Kerosene ferrofluid. Our findings indicate a significant and rapid change in the complex refractive indices at 0.5 THz with an increase in the magnetic field strength. Moreover, we observed a prominent absorption peak at 0.5 THz in transmittance and absorption coefficient measurements, corresponding to a magnetic field intensity of 178.0 mT. This phenomenon occurs due to the adjustment of particle spacing, leading to resonance under different magnetic field conditions. These research results hold immense potential in advancing the development of magneto-optical THz modulators for imaging and communication applications.
- 8 September 2022
- Published by Elsevier in Nanomedicine: Nanotechnology, Biology and Medicine
- Vol. 46, 102601
Sensitivity enhancement of magneto-optical Faraday effect immunoassay method based on biofunctionalized γ-Fe2O3@Au core-shell magneto-plasmonic nanoparticles for the blood detection of Alzheimer's disease
- 8 September 2022
- Published by Elsevier in Nanomedicine: Nanotechnology, Biology and Medicine
- Vol. 46, 102601
Sensitivity enhancement of magneto-optical Faraday effect immunoassay method based on biofunctionalized γ-Fe2O3@Au core-shell magneto-plasmonic nanoparticles for the blood detection of Alzheimer's disease
- Open Access
- 1 October 2021
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 19 (1) , 1-11
A magneto-optical biochip for rapid assay based on the Cotton–Mouton effect of γ-Fe2O3@Au core/shell nanoparticles
Background: In the past decades, different diseases and viruses, such as Ebola, MERS and COVID-19, impacted the human society and caused huge cost in different fields. With the increasing threat from the new or unknown diseases, the demand of rapid and sensitive assay method is more and more urgent. Results: In this work, we developed a magneto-optical biochip based on the Cotton–Mouton effect of γ-Fe2O3@Au core/shell magnetic nanoparticles. We performed a proof-of-concept experiment for the detection of the spike glycoprotein S of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The assay was achieved by measuring the magneto-optical Cotton–Mouton effect of the biochip. This magneto-optical biochip can not only be used to detect SARS-CoV-2 but also can be easily modified for other diseases assay. Conclusion: The assay process is simple and the whole testing time takes only 50 min including 3 min for the CM rotation measurement. The detection limit of our method for the spike glycoprotein S of SARS-CoV-2 is estimated as low as 0.27 ng/mL (3.4 pM). Graphic
- 1 October 2021
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 19 (1) , 1-11
Open AccessA magneto-optical biochip for rapid assay based on the Cotton–Mouton effect of γ-Fe2O3@Au core/shell nanoparticles
Background: In the past decades, different diseases and viruses, such as Ebola, MERS and COVID-19, impacted the human society and caused huge cost in different fields. With the increasing threat from the new or unknown diseases, the demand of rapid and sensitive assay method is more and more urgent. Results: In this work, we developed a magneto-optical biochip based on the Cotton–Mouton effect of γ-Fe2O3@Au core/shell magnetic nanoparticles. We performed a proof-of-concept experiment for the detection of the spike glycoprotein S of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The assay was achieved by measuring the magneto-optical Cotton–Mouton effect of the biochip. This magneto-optical biochip can not only be used to detect SARS-CoV-2 but also can be easily modified for other diseases assay. Conclusion: The assay process is simple and the whole testing time takes only 50 min including 3 min for the CM rotation measurement. The detection limit of our method for the spike glycoprotein S of SARS-CoV-2 is estimated as low as 0.27 ng/mL (3.4 pM). Graphic
- Open Access
- 5 May 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-15
Improvement of multisource localization of magnetic particles in an animal
In this simulation work, the linearized Bregman iterative algorithm was applied to solve the magnetic source distribution problem of a magnetic particle imaging (MPI) system for small animals. MPI system can apply an excitation magnetic field, and the induced magnetic field from the magnetic nanoparticles (MNPs) can be detected by the sensors of MPI system. With a gaussian distribution source at the upper side of the mouse brain, sensors set above the mouse brain and the constant excitation magnetic field, the average deviation of the calculated source distribution from the multiplane scanning along the axis away from the mouse brain and the closest plane scanning are 2.78 × 10–3 and 2.84 × 10–3 respectively. The simulated result showed that combination of multiplane scanning hardly improves the accuracy of the source localization. In addition, a gradient scan method was developed that uses gradient magnetic field to scan the mouse brain. The position of the maximum of the lead field matrix will be controlled by the gradient field. With a set up gaussian distribution source at the bottom of the mouse brain, the average deviation of the calculated source distribution from the gradient scan method and the constant field are 4.42 × 10–2 and 5.05 × 10–2. The location error from the two method are 2.24 × 10–1 cm and 3.61 × 10–1 cm. The simulation showed that this method can improve the accuracy compared to constant field when the source is away from the sensor and having a potential for application.
- 5 May 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-15
Open AccessImprovement of multisource localization of magnetic particles in an animal
In this simulation work, the linearized Bregman iterative algorithm was applied to solve the magnetic source distribution problem of a magnetic particle imaging (MPI) system for small animals. MPI system can apply an excitation magnetic field, and the induced magnetic field from the magnetic nanoparticles (MNPs) can be detected by the sensors of MPI system. With a gaussian distribution source at the upper side of the mouse brain, sensors set above the mouse brain and the constant excitation magnetic field, the average deviation of the calculated source distribution from the multiplane scanning along the axis away from the mouse brain and the closest plane scanning are 2.78 × 10–3 and 2.84 × 10–3 respectively. The simulated result showed that combination of multiplane scanning hardly improves the accuracy of the source localization. In addition, a gradient scan method was developed that uses gradient magnetic field to scan the mouse brain. The position of the maximum of the lead field matrix will be controlled by the gradient field. With a set up gaussian distribution source at the bottom of the mouse brain, the average deviation of the calculated source distribution from the gradient scan method and the constant field are 4.42 × 10–2 and 5.05 × 10–2. The location error from the two method are 2.24 × 10–1 cm and 3.61 × 10–1 cm. The simulation showed that this method can improve the accuracy compared to constant field when the source is away from the sensor and having a potential for application.
- Open Access
- 11 November 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-8
Magneto-Optical Characteristics of Streptavidin-Coated Fe3O4@Au Core-Shell Nanoparticles for Potential Applications on Biomedical Assays
Recently, gold-coated magnetic nanoparticles have drawn the interest of researchers due to their unique magneto-plasmonic characteristics. Previous research has found that the magneto-optical Faraday effect of gold-coated magnetic nanoparticles can be effectively enhanced because of the surface plasmon resonance of the gold shell. Furthermore, gold-coated magnetic nanoparticles are ideal for biomedical applications because of their high stability and biocompatibility. In this work, we synthesized Fe3O4@Au core-shell nanoparticles and coated streptavidin (STA) on the surface. Streptavidin is a protein which can selectively bind to biotin with a strong affinity. STA is widely used in biotechnology research including enzyme-linked immunosorbent assay (ELISA), time-resolved immunofluorescence (TRFIA), biosensors, and targeted pharmaceuticals. The Faraday magneto-optical characteristics of the biofunctionalized Fe3O4@Au nanoparticles were measured and studied. We showed that the streptavidin-coated Fe3O4@Au nanoparticles still possessed the enhanced magneto-optical Faraday effect. As a result, the possibility of using biofunctionalized Fe3O4@Au nanoparticles for magneto-optical biomedical assays should be explored.
- 11 November 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-8
Open AccessMagneto-Optical Characteristics of Streptavidin-Coated Fe3O4@Au Core-Shell Nanoparticles for Potential Applications on Biomedical Assays
Recently, gold-coated magnetic nanoparticles have drawn the interest of researchers due to their unique magneto-plasmonic characteristics. Previous research has found that the magneto-optical Faraday effect of gold-coated magnetic nanoparticles can be effectively enhanced because of the surface plasmon resonance of the gold shell. Furthermore, gold-coated magnetic nanoparticles are ideal for biomedical applications because of their high stability and biocompatibility. In this work, we synthesized Fe3O4@Au core-shell nanoparticles and coated streptavidin (STA) on the surface. Streptavidin is a protein which can selectively bind to biotin with a strong affinity. STA is widely used in biotechnology research including enzyme-linked immunosorbent assay (ELISA), time-resolved immunofluorescence (TRFIA), biosensors, and targeted pharmaceuticals. The Faraday magneto-optical characteristics of the biofunctionalized Fe3O4@Au nanoparticles were measured and studied. We showed that the streptavidin-coated Fe3O4@Au nanoparticles still possessed the enhanced magneto-optical Faraday effect. As a result, the possibility of using biofunctionalized Fe3O4@Au nanoparticles for magneto-optical biomedical assays should be explored.