Asmaa Abuessawy
Asmaa Abuessawy has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Eman Hussein Abdel-Rahman
Chemistry Department, Faculty of Science, Menoufia University, Shebin El-Kom, 32511, Egypt
3 shared publications - Mohamed Abdallah Hawata
Chemistry Department, Faculty of Science, Menoufia University, Shebin El-Kom 32511, Egypt
3 shared publications - Amr Fouda
Department of Botany and Microbiology, Faculty of Science, Al-Azhar University, Cairo, Egypt
2 shared publications - Nora A. Hamad
Chemistry Department, Faculty of Science, Menofia University, Shebin El-Kom 32511, Egypt
2 shared publications - Hagar S. El-Hema
Basic Science Department (Chemistry), Thebes Higher Institute for Engineering, Thebes Academy, Maadi, 11434, Egypt
1 shared publication - Mohamed N. Eisa
Chemistry Department, Faculty of Science, Menoufia University, Shebin El-Kom, Egypt
1 shared publication
Latest Publications
- Open Access
- 25 January 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (2) , 1-16
New functionalized magnetite chitosan–heterocyclic nanocomposites excelling in Cd2+ removal from aqueous solution with biological activity
Newly modified magnetic chitosan nanoparticles were synthesized for the high-efficiency removal of cadmium ions from aquatic environments. The structure and morphology of the composites were confirmed using FTIR, TGA, XRD, BET, SEM, TEM, SAED pattern analysis, and zeta potential. Under optimal conditions (pH = 6.0, contact time = 120 min, and sorbent dosage = 0.005 g/100 mL), the maximum removal of Cd (II) by synthesized samples MC, SA, and SB was 90.8%, 95%, and 95.15%, respectively. The kinetic data at optimal pH = 6 could be accurately described using a pseudo-second-order equation, while the Langmuir isotherm model best represented the sorption process. The Langmuir Qmax values for the synthesized nanocomposites S*, S3, S4, S*t, S3t, and S4t were 243.90, 250, 270.27, 212.76, 237.09, and 238.09, respectively. The thermodynamic analysis of these samples shows that the sorption process was exothermic (negative ∆H°) − 15.148, − 13.60, − 13.18, − 18.163, − 16.820, and − 16.06 kJmol−1, respectively. This implies that the diffusion of Cd(II) on the sorbent decreased with the temperature rise. The positive values of ΔS⁰ were 152.37, 147.80, 146.83, 160.94, 157.08, and 154.93 kJmol−1, respectively. The antimicrobial properties of the functionalized sorbents SA and SB were evaluated by measuring the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumoniae, representing Gram-negative and Gram-positive bacteria, respectively. SA and SB showed promising activity, demonstrating clear zones of (20 ± 0.2 and 18 ± 0.4 mm), and (22 ± 0.2 and 20 ± 0.4 mm) for S. aureus and K. pneumoniae, respectively. Additionally, these sorbents demonstrated moderate antioxidant activity, with the highest scavenging percentages of 94.20% and 96.63%, respectively, at a concentration of 1000 µg/mL, as assessed by the DPPH method.
- 25 January 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (2) , 1-16
Open AccessNew functionalized magnetite chitosan–heterocyclic nanocomposites excelling in Cd2+ removal from aqueous solution with biological activity
Newly modified magnetic chitosan nanoparticles were synthesized for the high-efficiency removal of cadmium ions from aquatic environments. The structure and morphology of the composites were confirmed using FTIR, TGA, XRD, BET, SEM, TEM, SAED pattern analysis, and zeta potential. Under optimal conditions (pH = 6.0, contact time = 120 min, and sorbent dosage = 0.005 g/100 mL), the maximum removal of Cd (II) by synthesized samples MC, SA, and SB was 90.8%, 95%, and 95.15%, respectively. The kinetic data at optimal pH = 6 could be accurately described using a pseudo-second-order equation, while the Langmuir isotherm model best represented the sorption process. The Langmuir Qmax values for the synthesized nanocomposites S*, S3, S4, S*t, S3t, and S4t were 243.90, 250, 270.27, 212.76, 237.09, and 238.09, respectively. The thermodynamic analysis of these samples shows that the sorption process was exothermic (negative ∆H°) − 15.148, − 13.60, − 13.18, − 18.163, − 16.820, and − 16.06 kJmol−1, respectively. This implies that the diffusion of Cd(II) on the sorbent decreased with the temperature rise. The positive values of ΔS⁰ were 152.37, 147.80, 146.83, 160.94, 157.08, and 154.93 kJmol−1, respectively. The antimicrobial properties of the functionalized sorbents SA and SB were evaluated by measuring the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumoniae, representing Gram-negative and Gram-positive bacteria, respectively. SA and SB showed promising activity, demonstrating clear zones of (20 ± 0.2 and 18 ± 0.4 mm), and (22 ± 0.2 and 20 ± 0.4 mm) for S. aureus and K. pneumoniae, respectively. Additionally, these sorbents demonstrated moderate antioxidant activity, with the highest scavenging percentages of 94.20% and 96.63%, respectively, at a concentration of 1000 µg/mL, as assessed by the DPPH method.
- Open Access
- 28 August 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 32 (2) , 826-841
A new Modified Heterocyclic-Magnetite Chitosan Nanocomposite for Efficient Alizarin Red Dye Removal: Adsorption Analysis and Antibacterial Activity
Alizarin Red (AR) is one of the most colored hazardous industrial dyes. For effective removal of AR, a new sorbent of modified heterocyclic-magnetite chitosan nanocomposite labeled as AOC@MC was synthesized and characterized by FTIR, TGA, XRD, BET, TEM,SAED pattern and SEM-EDX. Effect of contact time, pH, adsorbent dosage, initial Alizarine Red concentration and temperature was investigated. The maximum AR removal was 98.9% and attained at optimum conditions which were pH = 3.0, contact time = 50 min., and adsorbent dosage = 0.03 g/L. The findings revealed that at pH 3 and 30 °C, the maximum adsorption capacity was approximately 162 mg/g. Within 50 min, equilibrium adsorption was attained. A pseudo-second-order equation might be used to fit the kinetic data that was acquired at the optimal pH level of 3. Langmuir adsorption isotherms could accurately represent the adsorption process. The antimicrobial properties of the functionalized sorbent AOC@MC and its heterocyclic base AOC were characterized by determining the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumonia as a model for Gram-positive and Gram-negative bacteria respectively. AOC@MC exhibits promising activity with clear zones of 20.1 ± 0.2 and 17.6 ± 0.4 mm for S. aureus and K. pneumonia respectively. Overall, the modified sorbent AOC@MC was efficient on AR dye removal and antibacterial activity compared to the corresponding heterocyclic compound AOC.
- 28 August 2023
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 32 (2) , 826-841
Open AccessA new Modified Heterocyclic-Magnetite Chitosan Nanocomposite for Efficient Alizarin Red Dye Removal: Adsorption Analysis and Antibacterial Activity
Alizarin Red (AR) is one of the most colored hazardous industrial dyes. For effective removal of AR, a new sorbent of modified heterocyclic-magnetite chitosan nanocomposite labeled as AOC@MC was synthesized and characterized by FTIR, TGA, XRD, BET, TEM,SAED pattern and SEM-EDX. Effect of contact time, pH, adsorbent dosage, initial Alizarine Red concentration and temperature was investigated. The maximum AR removal was 98.9% and attained at optimum conditions which were pH = 3.0, contact time = 50 min., and adsorbent dosage = 0.03 g/L. The findings revealed that at pH 3 and 30 °C, the maximum adsorption capacity was approximately 162 mg/g. Within 50 min, equilibrium adsorption was attained. A pseudo-second-order equation might be used to fit the kinetic data that was acquired at the optimal pH level of 3. Langmuir adsorption isotherms could accurately represent the adsorption process. The antimicrobial properties of the functionalized sorbent AOC@MC and its heterocyclic base AOC were characterized by determining the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumonia as a model for Gram-positive and Gram-negative bacteria respectively. AOC@MC exhibits promising activity with clear zones of 20.1 ± 0.2 and 17.6 ± 0.4 mm for S. aureus and K. pneumonia respectively. Overall, the modified sorbent AOC@MC was efficient on AR dye removal and antibacterial activity compared to the corresponding heterocyclic compound AOC.
- Open Access
- 19 May 2023
- Published by Springer Nature in Research Square
New modified heterocyclic-magnetite chitosan nanocomposite for efficient alizarin red dye removal: adsorption analysis and antibacterial activity.
Alizarin Red (AR) is one of the most colored hazardous industrial dye. For effective removal of AR, a new sorbent of modified heterocyclic- magnetite chitosan nanocomposite (AOC@MC) was synthesized and characterized by FTIR, TGA, and SEM-EDX Effect of contact time, pH, adsorbent dosage, initial Alizarine Red concentration and temperature was investigated. The maximum AR removal was 98.9% and attained at optimum conditions which were pH = 3.0, contact time = 50 min., and adsorbent dosage = 0.03 g/L. The €findings revealed that at pH 3 and 30◦ C, the maximum adsorption capacity was approximately 162 mg/g. Within 50 min, equilibrium adsorption was attained. A pseudo-second-order equation might be used to fit the kinetic data that was acquired at the optimal pH level of 3. Langmuir adsorption isotherms could accurately represent the adsorption process. The antimicrobial properties of the functionalized sorbent and its heterocyclic base are characterized by determining the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumonia as a model for Gram-positive and Gram-negative bacteria respectively. The modified chitosan sorbent (AOC@MC) exhibits promising activity with clear zones of 20.1 ± 0.2 and 17.6 ± 0.4 mm for S. aureus and K. pneumonia respectively. Whereas, the synthesized heterocyclic compounds didn’t show antibacterial activity toward tested strains. Overall, the modified compound was efficient on AR dye removal and antibacterial activity compared to unmodified and heterocyclic compounds.
- 19 May 2023
- Published by Springer Nature in Research Square
Open AccessNew modified heterocyclic-magnetite chitosan nanocomposite for efficient alizarin red dye removal: adsorption analysis and antibacterial activity.
Alizarin Red (AR) is one of the most colored hazardous industrial dye. For effective removal of AR, a new sorbent of modified heterocyclic- magnetite chitosan nanocomposite (AOC@MC) was synthesized and characterized by FTIR, TGA, and SEM-EDX Effect of contact time, pH, adsorbent dosage, initial Alizarine Red concentration and temperature was investigated. The maximum AR removal was 98.9% and attained at optimum conditions which were pH = 3.0, contact time = 50 min., and adsorbent dosage = 0.03 g/L. The €findings revealed that at pH 3 and 30◦ C, the maximum adsorption capacity was approximately 162 mg/g. Within 50 min, equilibrium adsorption was attained. A pseudo-second-order equation might be used to fit the kinetic data that was acquired at the optimal pH level of 3. Langmuir adsorption isotherms could accurately represent the adsorption process. The antimicrobial properties of the functionalized sorbent and its heterocyclic base are characterized by determining the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumonia as a model for Gram-positive and Gram-negative bacteria respectively. The modified chitosan sorbent (AOC@MC) exhibits promising activity with clear zones of 20.1 ± 0.2 and 17.6 ± 0.4 mm for S. aureus and K. pneumonia respectively. Whereas, the synthesized heterocyclic compounds didn’t show antibacterial activity toward tested strains. Overall, the modified compound was efficient on AR dye removal and antibacterial activity compared to unmodified and heterocyclic compounds.