Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abdoulaye Kebe has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Comparison of Fixed-Tilt and Dual-Axis Solar Tracking Systems: A Case Study on Rural Electrification in Senegal

    by Moustapha Diop, Oumar Dia, Ibrahima Gueye, Abdoulaye Kebe

    This study presents a theoretical comparative analysis of photovoltaic systems using Fixed-Tilt and dual-axis solar tracking structures, applied to rural electrification. The analysis focuses on the village of Kakouda, located in the Kaffrine region of Senegal, and is based on local meteorological data, particularly solar irradiation and ambient temperature, combined with mathematical models describing the apparent motion of the sun. Energy performance is evaluated using monthly energy production, solar irradiation, and Peak Sun Hours. The results show that, for the same installed capacity of 70 kWp, dual-axis solar tracking systems provide an average annual energy gain of 23.57 %. When systems are sized to meet a given energy demand of 230 kWh per day, solar tracking enables a reduction in installed capacity of approximately 23 %. These results confirm the technical advantages of solar trackers in terms of energy gain and land-use efficiency, resulting in a reduced number of photovoltaic modules. However, for small-scale community photovoltaic systems, the additional energy production corresponds to a relatively modest benefit compared to the higher investment and maintenance costs associated with tracking systems. This study highlights the need to identify an optimal compromise between energy performance and overall system cost, and emphasizes the importance of developing simplified, low-cost, and energy-efficient solar tracking solutions adapted to the specific technical, economic, and territorial conditions encountered in Senegal.

  • Contribution au pré dimensionnement et au contrôle des unités de production d’énergie électrique en site isolé à partir des énergies renouvelables : Application au cas du Sénégal

    by Abdoulaye Kébé

    La crise énergétique marquée par une flambée des prix du pétrole et les impératifs d’un développement durable font des énergies renouvelables une alternative qui suscitent aujourd'hui l’intérêt de plusieurs équipes de recherches. Le Sénégal, pays subsaharien, non producteur de pétrole n’est pas épargné par cette crise. Celle-ci se traduit par, une faible couverture du pays (en particulier les zones rurales) par le réseau électrique national. Pour faire face à cela, la nouvelle orientation en matière de politique énergétique met l’accent sur l’utilisation des énergies renouvelables notamment, le solaire et l’éolienne. L'objectif principal de cette thèse est de dégager une méthodologie de conception d’un site isolé de production d’énergie électrique à partir des énergies alternatives. Il s'agit à partir des caractéristiques d’un site (ressources d’énergie disponibles, besoins énergétiques) de :- mettre en place une démarche qui permette le choix d’une architecture du réseau et de dimensionner de façon optimale l’ensemble des constituants du réseau (machines, sources et dispositifs de stockage) en tenant compte de toutes les contraintes- concevoir un dispositif de commande des composantes et de gestion des flux d’énergie Cette thèse comprend trois chapitres :- Chapitre 1 : pose la problématique de l’énergie au Sénégal. L’organisation institutionnelle du sous-secteur de l’électricité, les réalisations et les projets en cours sont présentés. Aussi, une étude sur les architectures de micro-réseaux est faite. - Chapitre 2 : traite des outils et logiciels. Une étude comparative des principaux logiciels d’analyse, de conception et simulation des micro-réseaux est réalisée. L’ensemble des composants de notre système ont été modélisées. Les méthodes d’optimisation et des outils de représentation graphique (Bond Graph, GIC et REM) des systèmes ont été présentés. Une enquête menée et une recherche bibliographique nous ont permis d’évaluer le potentiel énergétique du site et les besoins des populations.- Chapitre 3 : il s’agit de l’application de notre outil sur un site isolé identifié au Sénégal (MBoro/Mer). L’optimisation à travers la fonction objectif coût annualisée du système (ACS) nous a permis de dimensionner de façon optimale notre système. Aussi la commande du système avec la Représentation Energétique Macroscopique (REM) a été conçue.Pour la suite du travail, il faudrait envisager une prise en charge des problèmes de disponibilité du système à travers une surveillance et une supervision du dispositif. Le volet socio-économique aussi est à intégrer dans le futur afin de satisfaire l’évolution des besoins et des habitudes des populations.

  • Open Access

    Evaluation of sensorless VF-MRAS and FOC-MRAS of IM electrical drive system

    by Moustapha Diop, Abdoulaye Kebe, Ibrahima Gueye

    This paper evaluates the performance of sensorless vector and scalar control methods, namely field-oriented control-based model reference adaptive system (FOC-MRAS) and voltage frequency-based model reference adaptive system (VF-MRAS), applied to an induction motor (IM) driven by a space vector modulation inverter. In motorized systems, conventional control methods use mechanical sensors, which can be cumbersome and costly. To overcome these limitations, sensorless control techniques based on speed estimation have been introduced. In this paper, MRAS-based sensorless speed control for IM drives using rotor flux is used. This adaptive system uses a reference model based on rotor flux and implements closed-loop control. The estimated speed derived from the current and voltage models is compared to the desired speed and adjusted by the proportional-integral (PI) controllers. The performances of the approaches are evaluated in terms of speed regulation and minimization of electromagnetic torque and rotor flux ripples, through a comparative analysis of sensor and sensorless controls under various operating conditions, including variable loads and speed reversal. The simulation results obtained, using consistent criteria for both methods, confirm the effectiveness of sensorless control.


  • Open Access

    Optimal sizing and economic assessment of diesel and solar mills for cereal milling in rural areas of Senegal

    by Moustapha Diop, Mouhamadou Falilou Ndiaye, Ibrahima Gueye, Abdoulaye Kebe, Omar Dia

    This paper aims at using life cycle costing (LCC) to assess the economic viability of solar and diesel mills for cereal milling, adopting several scenarios of village sizes in Senegal and time perspectives. This work is intended to provide decision-makers and stakeholders with valuable information for selecting optimal milling systems, taking into account both economic and village size considerations. The methodology adopted is based on system specifications and daily cereal consumption profiles. To determine the economic performance of systems, three types of villages are evaluated and analyzed in detail from short, medium, and long-term perspectives. The results indicate that solar mills are the most economical systems for milling cereals in remote villages in the long term, with a potential economic gain of 10%, 31%, and 41% for small, medium, and big villages respectively, compared to diesel mills. However, solar mills are less promising in the short term.

  • Open Access

    Effects of hammer configurations on pearl millet grinding system with a hammer mill: theory and experiment

    by Moustapha Diop, Mouhamadou Thiam, Abdoulaye Kebe, Ibrahima Gueye

    In grinding processes using hammer mills, the configuration, number and speed of hammers are some of the main factors that can affect system performance. This paper aims to investigate the effects of hammer configurations in terms of specific energy consumption (SEC), grinding mass efficiency, and productivity. These effects were studied theoretically on the basis of classical grinding laws and experimentally with four different hammer configurations. From theoretical studies, a decreasing power model of SEC versus hammer configurations was developed, which was then validated with a determination coefficient of 0.99 in experiments using a 2 HP-DC hammer mill. The good agreement between theoretical and experimental results confirms that the specific energy consumption and the productivity are directly dependent on hammer configurations, but the effects are not significant for grinding mass efficiency.


  • Open Access

    Revolutionizing Solar Energy Conversion: A Neural MPPT-Controlled Photovoltaic Regulator

    by Université Cheikh Anta Diop Ensetp, Ibrahima Gueye, Abdoulaye Kebe, Oumar Dia, Mosstapha Diop

    This article presents the design of an innovative photovoltaic solar regulator equipped with a neural MPPT (Maximum Power Point Tracking) control and an advanced battery charge and discharge management algorithm. The main objective of this research is to significantly improve the efficiency of solar energy conversion into electrical energy by optimizing the maximum power point and effectively regulating battery charging and discharging. The neural MPPT control represents a major advancement in the field of solar energy. Unlike conventional algorithms, this approach enables the regulator to adapt to environmental variations, such as fluctuations in sunlight. As a result, the regulator can constantly adjust the maximum power point, ensuring a high efficiency of the solar system. The battery charge and discharge management algorithm is a crucial element in the regulator's design. Effective battery management is essential to maintain a balance between solar energy supply and electrical equipment consumption. Through this algorithm, the battery is kept within optimal charge ranges, thereby avoiding overcharging or excessive discharging, which contributes to prolonging its lifespan. To evaluate the performance of the proposed photovoltaic solar regulator, detailed simulations were conducted using the Matlab/Simulink software. The obtained results confirmed a significant improvement in solar energy conversion efficiency. The combination of the neural MPPT control and the battery management algorithm allows the system to operate optimally, even under changing environmental conditions. The practical applications of this research are diverse. This enhanced solar regulator could be deployed in remote regions without access to the traditional power grid. It also provides an effective solution for rural or isolated areas where solar energy can be a viable energy source, but intelligent management is required to ensure stable electrical supply. In conclusion, this study presents a significant advancement in the field of photovoltaic solar energy, combining a novel neural MPPT control with an advanced battery management algorithm. The simulation results clearly demonstrate a substantial improvement in solar energy conversion efficiency and more efficient battery management. This regulator opens up new possibilities for the utilization of solar energy in various demanding environments, offering a promising solution for powering remote or off-grid areas.