CZChen Zhang

Chen Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chen Zhang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fabrication of Hierarchical Microstructures via Laser-Induced Shrinkage of Shape Memory Polymers for Flexible Pressure Sensing

    by Rui Chen, Chen Zhang, Chiqian Xiao, Tianchang Zhao, Tao Luo, Wei Zhou

    Hierarchical microstructures are widely recognized as one of the most effective components for enhancing the performance of flexible pressure sensors. However, the rapid and controllable fabrication of pressure sensing layers with hierarchical microstructures remains a significant challenge. In this study, we propose a method that utilizes laser-induced microscale shrinkage of shape memory polymers to enable rapid and controllable fabrication of hierarchical microstructures for high-performance pressure sensing. We systematically investigate the influence of UV laser fabrication parameters on the architecture and morphology of hierarchical microstructures. A flexible pressure sensor, equipped with optimized hierarchical microstructures, exhibits a high sensitivity larger than 15 kPa-1 and excellent linearity (R2 = 0.994) in a range from 0 to 200 kPa. It features response and recovery times of 57 and 62 ms, respectively, and maintains good stability, enduring over 5,000 cycles. The laser-induced shrinkage of shape memory polymers offers an effective method for the fabrication of hierarchical microstructures, holding great potential to boost the performance of flexible pressure sensors in applications within intelligent robotics and wearable healthcare.


  • Laser Fabrication of Humidity Sensors on Ethanol-Soaked Polyimide for Fully Contactless Respiratory Monitoring

    by Rui Chen, Sirui Liu, Chen Zhang, Chongjie Jiang, Wei Zhou, Pengfeng Chen, Dezhi Wu, Dongxia Li, Jinhui Zhang, Tao Luo

    Humidity-sensor-based fully contactless respiratory monitoring can eliminate the discomfort and infection risks associated with any wearable device. However, challenges in the facile fabrication of highly sensitive humidity sensors continue to hinder their widespread application for fully contactless respiratory monitoring. In this study, we introduce a simple method to fabricate highly sensitive humidity sensors. Our method employs laser-induced graphene (LIG) on an ethanol-soaked polyimide (PI) film as the electrode of the humidity sensor. The ethanol-soaked PI between adjacent LIG electrodes functions as the sensing material, enabling ion-conductive humidity sensing. Compared to the LIG humidity sensors fabricated on untreated PI films, LIG humidity sensors fabricated on ethanol-soaked PI films exhibit superior performance with higher linearity (R2 = 0.9936), reduced hysteresis (ΔH = 5.1% RH), and increased sensitivity (0.65%/RH). Notably, the LIG humidity sensor fabricated on the ethanol-soaked PI film can detect a person's breathing from a distance of 30 cm, a capability not achieved by sensors fabricated on untreated PI films. Moreover, incorporating these LIG humidity sensors into an array further enhances both the detection distance and the sensitivity for respiratory monitoring. Experimental results demonstrate that the LIG humidity sensor array can be employed for fully contactless on-bed respiration monitoring and for continuous, fully contactless monitoring of the respiratory rate during treadmill exercise. These results highlight the great potential of our LIG humidity sensors for various practical applications in medicine and sports.


  • Facile and Cost-Effective Fabrication of Highly Sensitive, Fast-Response Flexible Humidity Sensors Enabled by Laser-Induced Graphene

    by Sirui Liu, Rui Chen, Chongjie Jiang, Chen Zhang, Dongyang Chen, Wei Zhou, Songyue Chen, Tao Luo

    The need to simplify fabrication processes and reduce costs for high-performance humidity sensors is increasingly vital, especially in fields such as healthcare and agriculture. This study introduces a simple and cost-effective approach using laser-induced graphene (LIG) on a polyimide film to create highly sensitive and fast-response flexible humidity sensors. The LIG acts as the electrode, while the porous polyimide between the interdigital LIG electrodes serves as the humidity sensing material, showing changes in electrical conductivity based on the humidity levels. The LIG humidity sensor, an ionic-conduction type, exhibits remarkable sensitivity, with a 28,231-fold increase in current as relative humidity changes from 26.1 to 90.2%. It also boasts of ultrashort response/recovery times (less than 0.5/7 s), providing significant advantages in detecting rapid and subtle humidity variations compared to a commercially available MEMS humidity sensor. We successfully demonstrated the LIG humidity sensor's capabilities in ultrafast breathing monitoring (≈174 times per minute), moisture detection of grains, and detection of sudden water pipe leakage. Due to its straightforward and cost-effective fabrication process, the LIG humidity sensor holds immense practical value for affordable, widespread use across various applications.


  • Top Cited Papers
    Open Access

    Nonlinearity synergy: An elegant strategy for realizing high-sensitivity and wide-linear-range pressure sensing

    by Rui Chen, Tao Luo, Jincheng Wang, Renpeng Wang, Chen Zhang, Yu Xie, Lifeng Qin, Haimin Yao, Wei Zhou

    Flexible pressure sensors are indispensable components in various applications such as intelligent robots and wearable devices, whereas developing flexible pressure sensors with both high sensitivity and wide linear range remains a great challenge. Here, we present an elegant strategy to address this challenge by taking advantage of a pyramidal carbon foam array as the sensing layer and an elastomer spacer as the stiffness regulator, realizing an unprecedentedly high sensitivity of 24.6 kPa−1 and an ultra-wide linear range of 1.4 MPa together. Such a wide range of linearity is attributed to the synergy between the nonlinear piezoresistivity of the sensing layer and the nonlinear elasticity of the stiffness regulator. The great application potential of our sensor in robotic manipulation, healthcare monitoring, and human-machine interface is demonstrated. Our design strategy can be extended to the other types of flexible sensors calling for both high sensitivity and wide-range linearity, facilitating the development of high-performance flexible pressure sensors for intelligent robotics and wearable devices.


  • Batch Fabrication of Paper-Based Waterproof Flexible Pressure Sensors Enabled by Roll-to-Roll Lamination

    by Chen Zhang, Rui Chen, Wenliya Luo, Jincheng Wang, Dongyang Chen, Pengfeng Chen, Sirui Liu, Yu Xie, Wei Zhou, Tao Luo

    Paper is a green and porous material that has been widely used in flexible pressure sensors due to its flexibility, renewability, and lightness. However, these sensors are often susceptible to environmental factors such as moisture and chemicals, leading to degradation or failure of their reliability for practical applications. Herein, we present a roll-to-roll lamination strategy for batch fabrication of paper-based waterproof flexible pressure sensors with good consistency based on single-walled carbon nanotube (SWCNT) coated tissue paper pieces. The pieces are sandwiched between poly(ethylene glycol) terephthalate (PET) films with a hot melt adhesive and screen-printed electrodes, and the layers are bonded reliably using roll-to-roll lamination. This process allows for the rapid fabrication of a batch of waterproof, flexible pressure sensors with high stability over 5000 loading/unloading cycles, an ultrashort response time of 8 ms, and a wide measurement range (450 kPa). These features enable our sensor to be utilized for human physiological signal detection, motion tracking, and drowning detection. Furthermore, the process also allows for the fabrication of sensor arrays for spatial pressure mapping and real-time human-machine interaction, expanding the application field of paper-based pressure sensors. This proposed batch fabrication strategy greatly enhances the consistency and reliability of paper-based pressure sensors, demonstrating endless possibilities for paper-based pressure sensors to be used for various applications.