Mica Vukic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mica Vukic has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Sasa Pavlovic
Faculty of Mechanical Engineering, University of Niš, Niš, Serbia
5 shared publications - Branka Nakomčić-Smaragdakis
Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia
3 shared publications - Evangelos Bellos
Department of Mechanical Engineering, School of Engineering, University of West Attica, 250 Thivon & Petrou Ralli, 12244 Athens, Greece
3 shared publications - Branka Radovanovic
Faculty of Mechanical Engineering, University of Nis
2 shared publications - Goran D. Vučković
Faculty of Mechanical Engineering, University of Niš, Niš, Serbia
2 shared publications - Marko Mančić
University of Nis
2 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by National Library of Serbia in Thermal Science
- Vol. 29 (5 Part A) , 3331-3341
Development of an analytical model for predicting the performance of an organic Rankine cycle
This investigation is a theoretical study of the thermodynamic performance of the organic Rankine cycle. A simplified analytical model is developed regarding the basic organic Rankine cycle by applying reasonable and realistic assumptions. Specifically, the analytical approach for the organic Rankine cycle efficiency uses the low cycle temperature, the high cycle temperature, the superheating degree, the liquid and vapor-specific heat capacities and the fluid latent heat at the high temperature level. The calculated average deviation of the presented analytical model compared to the detailed thermodynamic one was calculated at 5.03% which is an acceptable value. Additionally, analytical approximations for the efficiency with regression models were created for three different working fluids named n-pentane, toluene and R600. The results of this work can be exploited for the quick and accurate analysis of organic Rankine cycles, and they can be used for the development of optimization models for reducing the computational time of the analysis.
- 1 January 2025
- Published by National Library of Serbia in Thermal Science
- Vol. 29 (5 Part A) , 3331-3341
Open AccessDevelopment of an analytical model for predicting the performance of an organic Rankine cycle
This investigation is a theoretical study of the thermodynamic performance of the organic Rankine cycle. A simplified analytical model is developed regarding the basic organic Rankine cycle by applying reasonable and realistic assumptions. Specifically, the analytical approach for the organic Rankine cycle efficiency uses the low cycle temperature, the high cycle temperature, the superheating degree, the liquid and vapor-specific heat capacities and the fluid latent heat at the high temperature level. The calculated average deviation of the presented analytical model compared to the detailed thermodynamic one was calculated at 5.03% which is an acceptable value. Additionally, analytical approximations for the efficiency with regression models were created for three different working fluids named n-pentane, toluene and R600. The results of this work can be exploited for the quick and accurate analysis of organic Rankine cycles, and they can be used for the development of optimization models for reducing the computational time of the analysis.
- Open Access
- 1 January 2025
- Published by National Library of Serbia in Thermal Science
- Vol. 29 (5 Part B) , 3821-3832
Performance assessment of an air-to-air heat pump with advanced technologies based on exergy analysis
The buildings sector has a significant impact on the environment, considering that in addition industry and transport among the largest consumers of energy. Preservation of the external appearance of building fa?ades and high standards in terms of thermal comfort have led to the development of systems in which many indoor units can be connected to a single outdoor unit. Such systems are widely known as variable refrigerant volume/variable refrigerant flow systems. However, the constant need to increase energy efficiency has given rise to new technology, named variable refrigerant temperature. Here, the first and Second law approach of an air-source heat pump with modern control strategies which worked in the moderate continental climate was performed. To fully understand the processes, the total exergy destruction for every main component split unavoidable and avoidable part. The results show the biggest negative impact on exergy efficiency of observed system has internal ireversibilities in the speed control compressor with 17.4%. Destroyed work in other main components generated cumulative negative impact of 26.7% and the exergy losses reduced exergy efficiency by 33.5%. If the available modern technologies are applied, the 27% of destroyed useful work in compressor can be avoided, but the bigger part (73%) is unavoidable.
- 1 January 2025
- Published by National Library of Serbia in Thermal Science
- Vol. 29 (5 Part B) , 3821-3832
Open AccessPerformance assessment of an air-to-air heat pump with advanced technologies based on exergy analysis
The buildings sector has a significant impact on the environment, considering that in addition industry and transport among the largest consumers of energy. Preservation of the external appearance of building fa?ades and high standards in terms of thermal comfort have led to the development of systems in which many indoor units can be connected to a single outdoor unit. Such systems are widely known as variable refrigerant volume/variable refrigerant flow systems. However, the constant need to increase energy efficiency has given rise to new technology, named variable refrigerant temperature. Here, the first and Second law approach of an air-source heat pump with modern control strategies which worked in the moderate continental climate was performed. To fully understand the processes, the total exergy destruction for every main component split unavoidable and avoidable part. The results show the biggest negative impact on exergy efficiency of observed system has internal ireversibilities in the speed control compressor with 17.4%. Destroyed work in other main components generated cumulative negative impact of 26.7% and the exergy losses reduced exergy efficiency by 33.5%. If the available modern technologies are applied, the 27% of destroyed useful work in compressor can be avoided, but the bigger part (73%) is unavoidable.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Mathematic,p. 424-431
Numerical study on thermal energy storage system integrated flat plate solar collectors in buildings
The use of renewable energy sources for electricity is one of the most promising techniques in order to face environmental problems and high CO2 emissions. However, the power production from photovoltaics and wind energy is not stable and this fact creates issues between the production profile and the demand profile. Therefore, an effective storage technique is needed, except for the idea of batteries. The objective of the present investigation is the investigation of a novel pumped thermal energy storage system. This system uses the volatile electricity from renewables in order to feed a heat pump that produces heating at a medium temperatures level (e.g. 150oC) and stores it in a latent storage unit. The stored thermal energy can be used later in an organic Rankine cycle for power production when there is the proper demand. The novelty of this work is the incorporation of flat plate collectors for assisting the heat pump in order to increase the overall performance of the examined storage system. According to the results, the ambient source system leads to maximum power to power ratio of 38.5% and this value is lower than the respective values of the solar-assisted system. The maximum system efficiency was found for storage tank temperature at 220oC and evaporator temperature at 30oC, and in this case, the system energy efficiency is 19.1%, while the system exergy efficiency is 19.7%. For the typical case of (Tst=150oC and Tevap=70oC) the solar-assisted system presents a 61.1% power to power ratio which is 58.7% higher than the ambient source case.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Mathematic,p. 424-431
Open AccessNumerical study on thermal energy storage system integrated flat plate solar collectors in buildings
The use of renewable energy sources for electricity is one of the most promising techniques in order to face environmental problems and high CO2 emissions. However, the power production from photovoltaics and wind energy is not stable and this fact creates issues between the production profile and the demand profile. Therefore, an effective storage technique is needed, except for the idea of batteries. The objective of the present investigation is the investigation of a novel pumped thermal energy storage system. This system uses the volatile electricity from renewables in order to feed a heat pump that produces heating at a medium temperatures level (e.g. 150oC) and stores it in a latent storage unit. The stored thermal energy can be used later in an organic Rankine cycle for power production when there is the proper demand. The novelty of this work is the incorporation of flat plate collectors for assisting the heat pump in order to increase the overall performance of the examined storage system. According to the results, the ambient source system leads to maximum power to power ratio of 38.5% and this value is lower than the respective values of the solar-assisted system. The maximum system efficiency was found for storage tank temperature at 220oC and evaporator temperature at 30oC, and in this case, the system energy efficiency is 19.1%, while the system exergy efficiency is 19.7%. For the typical case of (Tst=150oC and Tevap=70oC) the solar-assisted system presents a 61.1% power to power ratio which is 58.7% higher than the ambient source case.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Energy sou,p. 38-42
Drying the hemp flower in a condensation dryer
The drying process of hemp flowers is crucial for preserving the quality of cannabinoids, terpenes, aromas, and other valuable compounds. This study investigates the drying of hemp flowers using a condensation dryer, combined with a heat pump. This type of dryer allows for significant energy savings by retaining both the latent and sensible heat within the chamber. Although the drying process is somewhat slower than in conventional dryers, the quality of the drying is exceptional. The dryer operates at slightly lower temperatures, up to 60ºC, making it ideal for delicate products such as hemp flowers, herbs, and chopped fruits and vegetables. The drying process plays a key role in the retention of aroma and in the overall quality of the products. Key drying parameters, including air temperature, humidity, and the amount of condensate collected, are continuously monitored. Results will provide detailed hourly insights into these parameters, along with an analysis of the drying regime, offering recommendations for optimizing the process to preserve product quality.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Energy sou,p. 38-42
Open AccessDrying the hemp flower in a condensation dryer
The drying process of hemp flowers is crucial for preserving the quality of cannabinoids, terpenes, aromas, and other valuable compounds. This study investigates the drying of hemp flowers using a condensation dryer, combined with a heat pump. This type of dryer allows for significant energy savings by retaining both the latent and sensible heat within the chamber. Although the drying process is somewhat slower than in conventional dryers, the quality of the drying is exceptional. The dryer operates at slightly lower temperatures, up to 60ºC, making it ideal for delicate products such as hemp flowers, herbs, and chopped fruits and vegetables. The drying process plays a key role in the retention of aroma and in the overall quality of the products. Key drying parameters, including air temperature, humidity, and the amount of condensate collected, are continuously monitored. Results will provide detailed hourly insights into these parameters, along with an analysis of the drying regime, offering recommendations for optimizing the process to preserve product quality.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Flow, heat,p. 276-284
Theoretical thermodynamic analysis of the Organic Rankine Cycle
The present work is a theoretical investigation of the organic Rankine cycle (ORC). A simplified cycle is studied aiming to determine the ORC thermodynamic efficiency in an analytical and simplistic way. Reasonable assumptions have been made and the methodology is based on an analysis of the cycle depiction in the temperature - specific entropy diagram. An analytical solution for the ORC efficiency was developed using the low cycle temperature, the high cycle temperature, the superheating degree, the liquid and vapor-specific heat capacities and the fluid latent heat at the high-temperature level. The reported mean deviation of the suggested analytical model compared to the detailed thermodynamic one was found at 5.03% which is an acceptable value. Moreover, analytical approximations for the efficiency with regression models were created for three different working fluids names n-pentane, toluene and R600. The present approach can be extended to extra working fluids and operating conditions and the present work consists of the first step for the establishment of this methodology.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Flow, heat,p. 276-284
Open AccessTheoretical thermodynamic analysis of the Organic Rankine Cycle
The present work is a theoretical investigation of the organic Rankine cycle (ORC). A simplified cycle is studied aiming to determine the ORC thermodynamic efficiency in an analytical and simplistic way. Reasonable assumptions have been made and the methodology is based on an analysis of the cycle depiction in the temperature - specific entropy diagram. An analytical solution for the ORC efficiency was developed using the low cycle temperature, the high cycle temperature, the superheating degree, the liquid and vapor-specific heat capacities and the fluid latent heat at the high-temperature level. The reported mean deviation of the suggested analytical model compared to the detailed thermodynamic one was found at 5.03% which is an acceptable value. Moreover, analytical approximations for the efficiency with regression models were created for three different working fluids names n-pentane, toluene and R600. The present approach can be extended to extra working fluids and operating conditions and the present work consists of the first step for the establishment of this methodology.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Flow, heat,p. 309-315
Effect of wall heat flux on flow and heat transfer characteristics in coiled corrugated pipes
The objective of this paper was to study the influence of high-intensity asymmetric heat flux at the wall on pressure drop and heat transfer in the Archimedean spiral coil made of transversely corrugated tube that was exposed to radiant heating and is supposed to represent heat absorber of parabolic dish solar concentrator. The working fluids were water and a mixture of propylene glycol and water (90% and 10% by volume, respectively). An increase in the heat flux density at the pipe wall affects the increase in the pressure drop and peripherally averaged Nu number in the considered geometry in all flow regimes. The effect is most noticeable in the laminar region and monotonically decreases with increasing Reynolds number and curvature ratio. The intensification of heat transfer is less compared to the increase in pressure drop with increasing heat load at the wall. Quantitative comparison of the obtained data with results in the literature is lacking due to significant differences between the considered geometries and experimental conditions.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Flow, heat,p. 309-315
Open AccessEffect of wall heat flux on flow and heat transfer characteristics in coiled corrugated pipes
The objective of this paper was to study the influence of high-intensity asymmetric heat flux at the wall on pressure drop and heat transfer in the Archimedean spiral coil made of transversely corrugated tube that was exposed to radiant heating and is supposed to represent heat absorber of parabolic dish solar concentrator. The working fluids were water and a mixture of propylene glycol and water (90% and 10% by volume, respectively). An increase in the heat flux density at the pipe wall affects the increase in the pressure drop and peripherally averaged Nu number in the considered geometry in all flow regimes. The effect is most noticeable in the laminar region and monotonically decreases with increasing Reynolds number and curvature ratio. The intensification of heat transfer is less compared to the increase in pressure drop with increasing heat load at the wall. Quantitative comparison of the obtained data with results in the literature is lacking due to significant differences between the considered geometries and experimental conditions.
- Open Access
- 1 January 2024
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (4 Part B) , 3209-3218
Daily thermodynamic analysis of a solar dish-driven reheating organic Rankine cycle
Solar concentrating systems can play a critical role in the future for designing sustainable cities. The goal of this investigation is the energy analysis of a solar-driven power plant based on the solar dish collector, storage thermal tank and a reheating organic Rankine cycle. The present thermodynamic cycle is a more efficient choice compared to other similar designs due to the existence of a double expansion with an intermediate reheating. Also, the use of the solar dish collector enables efficient operation in medium and high temperatures. More specifically, this investigation is performed on dynamic conditions aiming to determine the unit?s performance on a usual summer day. The analysis is done with a dynamic model based on mathematical formulas which are inserted into engineering equation solver. The simulation results proved that a collecting area of 500 m2 (50 modules) coupled with a storage tank of 5 m3 volume that feeds an organic Rankine cycle of 50 kWel nominal power leads to daily electricity production of 577 kWhel. The system efficiency is found to be 12.6%, the thermodynamic cycle efficiency 20.8% and the solar field thermal efficiency 60.8%. Therefore, it is obvious that the suggested unit leads to satisfying results, and it is a promising one for the design of sustainable renewably driven units in the future.
- 1 January 2024
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (4 Part B) , 3209-3218
Open AccessDaily thermodynamic analysis of a solar dish-driven reheating organic Rankine cycle
Solar concentrating systems can play a critical role in the future for designing sustainable cities. The goal of this investigation is the energy analysis of a solar-driven power plant based on the solar dish collector, storage thermal tank and a reheating organic Rankine cycle. The present thermodynamic cycle is a more efficient choice compared to other similar designs due to the existence of a double expansion with an intermediate reheating. Also, the use of the solar dish collector enables efficient operation in medium and high temperatures. More specifically, this investigation is performed on dynamic conditions aiming to determine the unit?s performance on a usual summer day. The analysis is done with a dynamic model based on mathematical formulas which are inserted into engineering equation solver. The simulation results proved that a collecting area of 500 m2 (50 modules) coupled with a storage tank of 5 m3 volume that feeds an organic Rankine cycle of 50 kWel nominal power leads to daily electricity production of 577 kWhel. The system efficiency is found to be 12.6%, the thermodynamic cycle efficiency 20.8% and the solar field thermal efficiency 60.8%. Therefore, it is obvious that the suggested unit leads to satisfying results, and it is a promising one for the design of sustainable renewably driven units in the future.
- Open Access
- 1 January 2023
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (00) , 184
Numerical investigation of heat transfer in spirally coiled corrugated pipes: Assessment of turbulence models
The Archimedean spiral coil made of a transversely corrugated pipe represents the radiant heat absorber of a parabolic dish solar concentrator. The main advantage of the considered design is the coupling of two passive methods for heat transfer enhancement - coiling the flow channel and changing the surface roughness. The aim of this numerical study is to assess the capability of Reynolds-averaged Navier-Stokes models of different complexity (Realizable k-ε, SST k-ω and RSM Linear Pressure-Strain) to adequately represent the heat transfer phenomena in the considered complex flow geometry for wide ranges of Reynolds and Prandtl numbers. The obtained results indicate that the Realizable k-ε model with enhanced wall treatment is inadequate to simulate the heat transfer for all flow conditions, while both SST and RSM slightly overestimate experimental data in the turbulent region and are able to predict laminarisation at low Reynolds numbers. The SST model predictions are more accurate in the transitional and at the beginning of the turbulent region, irrespective of the curvature ratio. RSM predictions are generally more accurate in the turbulent region. Numericaly obtained circumferential distributions of local Nu number reveal that considered turbulence models are unable to completely anticipate the interactions between the complex flow in the basic section of the pipe and the vortex flow within the corrugations.
- 1 January 2023
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (00) , 184
Open AccessNumerical investigation of heat transfer in spirally coiled corrugated pipes: Assessment of turbulence models
The Archimedean spiral coil made of a transversely corrugated pipe represents the radiant heat absorber of a parabolic dish solar concentrator. The main advantage of the considered design is the coupling of two passive methods for heat transfer enhancement - coiling the flow channel and changing the surface roughness. The aim of this numerical study is to assess the capability of Reynolds-averaged Navier-Stokes models of different complexity (Realizable k-ε, SST k-ω and RSM Linear Pressure-Strain) to adequately represent the heat transfer phenomena in the considered complex flow geometry for wide ranges of Reynolds and Prandtl numbers. The obtained results indicate that the Realizable k-ε model with enhanced wall treatment is inadequate to simulate the heat transfer for all flow conditions, while both SST and RSM slightly overestimate experimental data in the turbulent region and are able to predict laminarisation at low Reynolds numbers. The SST model predictions are more accurate in the transitional and at the beginning of the turbulent region, irrespective of the curvature ratio. RSM predictions are generally more accurate in the turbulent region. Numericaly obtained circumferential distributions of local Nu number reveal that considered turbulence models are unable to completely anticipate the interactions between the complex flow in the basic section of the pipe and the vortex flow within the corrugations.
- Open Access
- 1 January 2012
- Published by National Library of Serbia in Thermal Science
- Vol. 16 (suppl. 2) , 433-446
Avoidable and unavoidable exergy destruction and exergoeconomic evaluation of the thermal processes in a real industrial plant
Exergy analysis is a universal method for evaluating the rational use of energy. It can be applied to any kind of energy conversion system or chemical process. An exergy analysis identifies the location, the magnitude and the causes of thermodynamic inefficiencies and enhances understanding of the energy conversion processes in complex systems. Conventional exergy analyses pinpoint components and processes with high irreversibility. To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses are developed. These analyses provide additional information about component interactions and reveal the real potential for improvement of each component constituting a system, as well as of the overall system. In this paper, a real industrial plant is analyzed using both conventional and advanced exergy analyses, and exergoeconomic evaluation. Some of the exergy destruction in the plant components is unavoidable and constrained by technological, physical and economic limitations. Calculations related to the total avoidable exergy destruction caused by each component of the plant supplement the outcome of the conventional exergy analysis. Based on the all-reaching analysis, by improving the boiler operation (elimination of approximately 1 MW of avoidable exergy destruction in the steam boiler) the greatest improvement in the efficiency of the overall system can be achieved.
- 1 January 2012
- Published by National Library of Serbia in Thermal Science
- Vol. 16 (suppl. 2) , 433-446
Open AccessAvoidable and unavoidable exergy destruction and exergoeconomic evaluation of the thermal processes in a real industrial plant
Exergy analysis is a universal method for evaluating the rational use of energy. It can be applied to any kind of energy conversion system or chemical process. An exergy analysis identifies the location, the magnitude and the causes of thermodynamic inefficiencies and enhances understanding of the energy conversion processes in complex systems. Conventional exergy analyses pinpoint components and processes with high irreversibility. To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses are developed. These analyses provide additional information about component interactions and reveal the real potential for improvement of each component constituting a system, as well as of the overall system. In this paper, a real industrial plant is analyzed using both conventional and advanced exergy analyses, and exergoeconomic evaluation. Some of the exergy destruction in the plant components is unavoidable and constrained by technological, physical and economic limitations. Calculations related to the total avoidable exergy destruction caused by each component of the plant supplement the outcome of the conventional exergy analysis. Based on the all-reaching analysis, by improving the boiler operation (elimination of approximately 1 MW of avoidable exergy destruction in the steam boiler) the greatest improvement in the efficiency of the overall system can be achieved.