Gabriel Maroli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Gabriel Maroli has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Arben Merkoçi
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST Barcelona Spain
5 shared publications - Ruslan Álvarez-Diduk
Catalan Institute of Nanoscience and Nanotechnology (ICN2) CSIC and The Barcelona Institute of Science and Technology (BIST) Campus UAB, Bellaterra 08193 Barcelona Spain
2 shared publications - Andrew Piper
Nanobioelectronics and Biosensors Group, Institut Català de Nanociència i Nanotecnologia (ICN2). UAB Campus, Bellaterra, Barcelona 08193, Spain
1 shared publication - Andrés Fontana
Tyndall National Institute, Cork, Ireland
1 shared publication - Andy Bruno
Universitat Autònoma de Barcelona (UAB) Barcelona Spain
1 shared publication - Carlos Javier Rodríguez‐Hernández
Pediatric Cancer Institut de Recerca Sant Joan de Déu (IRSJD) Esplugues de Llobregat Spain
1 shared publication
Latest Publications
- Open Access
- 31 July 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70349
Quantum‐Capacitance Biosensing Enables Real‐Time Monitoring of Naxitamab for Therapeutic Response Stratification in Neuroblastoma
Neuroblastoma, a leading cause of cancer‐related mortality in early childhood, relies on anti‐GD2 immunotherapy, whose efficacy is critically dependent on systemic drug exposure that remains largely unmonitored in real time, limiting treatment optimization and early response assessment. Here, a first‐in‐class, label‐free electrochemical biosensing platform is reported for the direct quantification of naxitamab in patient‐derived samples. The system is based on a laser‐assisted reduced graphene oxide–gold nanoparticle (rGO@AuNPs) nanocomposite, enabling ultrasensitive detection through quantum capacitance modulation arising from perturbations in the electronic density of states of graphene upon biomolecular recognition. Laser‐assisted fabrication yields nanostructured electrodes with enhanced surface area and conductivity, promoting stable antibody immobilization and reproducible signal transduction. The platform operates in the femtomolar regime, with a linear response between 25 and 300 fM, high specificity against relevant interferents, and robust performance in diluted human serum. A single‐point calibration strategy enables accurate quantification while compensating for device variability. Application to retrospective clinical samples reveals distinct post‐infusion concentration profiles, enabling early discrimination between responder groups and detection of antidrug antibody development. This work establishes quantum‐capacitance biosensing as a generalizable strategy for real‐time monitoring of therapeutic antibodies in precision oncology.
- 31 July 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70349
Open AccessQuantum‐Capacitance Biosensing Enables Real‐Time Monitoring of Naxitamab for Therapeutic Response Stratification in Neuroblastoma
Neuroblastoma, a leading cause of cancer‐related mortality in early childhood, relies on anti‐GD2 immunotherapy, whose efficacy is critically dependent on systemic drug exposure that remains largely unmonitored in real time, limiting treatment optimization and early response assessment. Here, a first‐in‐class, label‐free electrochemical biosensing platform is reported for the direct quantification of naxitamab in patient‐derived samples. The system is based on a laser‐assisted reduced graphene oxide–gold nanoparticle (rGO@AuNPs) nanocomposite, enabling ultrasensitive detection through quantum capacitance modulation arising from perturbations in the electronic density of states of graphene upon biomolecular recognition. Laser‐assisted fabrication yields nanostructured electrodes with enhanced surface area and conductivity, promoting stable antibody immobilization and reproducible signal transduction. The platform operates in the femtomolar regime, with a linear response between 25 and 300 fM, high specificity against relevant interferents, and robust performance in diluted human serum. A single‐point calibration strategy enables accurate quantification while compensating for device variability. Application to retrospective clinical samples reveals distinct post‐infusion concentration profiles, enabling early discrimination between responder groups and detection of antidrug antibody development. This work establishes quantum‐capacitance biosensing as a generalizable strategy for real‐time monitoring of therapeutic antibodies in precision oncology.
- Open Access
- 1 May 2026
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 308, 118709
A paper-based fluorescent biosensing platform for miRNA detection with dual high-throughput and smartphone readout
- 1 May 2026
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 308, 118709
Open AccessA paper-based fluorescent biosensing platform for miRNA detection with dual high-throughput and smartphone readout
- 13 August 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7525-7534
Flexible low-resistance laser-reduced graphene oxide for NFC electromyography application
- 13 August 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (8) , 7525-7534
Flexible low-resistance laser-reduced graphene oxide for NFC electromyography application
- Open Access
- 6 March 2025
- Published by Wiley in Advanced Science
- Vol. 12 (20) , e2500365
Prussian‐Blue Catalysis and NFC Synergy: a Battery‐Free Laser‐Induced Graphene‐Based Platform for Urine Glucose Monitoring at Point‐of‐Care
Prussian‐blue nanoparticles (PBNPs) show promise in electrochemical hydrogen peroxide (H 2 O 2 ) sensing but face operational stability challenges without complex strategies. This study introduces a simplified, polymer‐based synthesis method, enhancing their stability in a single step. Chemical polymerization of Prussian‐blue (PB) and poly(3,4‐ethylenedioxythiophene) (PEDOT) with gelatin as a polycationic soft template yields a self‐assembled PB‐infused Catalytic Hetero‐interface Architecture (PB‐CHIA) that remarkably improves the stability of PBNPs and offers functional groups for enzyme immobilization, supporting robust biosensing applications. The softened PEDOT rigidity extends PB‐CHIA's applicability to various carbonaceous electrode substrates, including glassy carbon and laser‐induced graphene (LIG) via simple drop‐casting. A fluidic cell module designed with the optimized LIG morphology (nano‐fibrous fringes, LIG‐F, diameter: 72.87 ± 12.24 nm) modified with PB‐CHIA and glucose oxidase enables non‐invasive urine glucose monitoring. The configuration accurately quantifies glucose within a linear range of 10–400 µM [R 2 : 0.991, Sensitivity: 29.88 ± 4.98 µA mM⁻¹ cm⁻ 2 , Detection Limit: 4.52 ± 2.24 µM], covering medical needs. A near‐field communication potentiostat is devised for a fully integrated, batteryless, wireless point‐of‐care (POC) prototype, enabling rapid smartphone readouts in 15 s for daily home‐based use. The stable operation of PB‐CHIA allows working electrodes’ scalable production, highlighting its potential for diverse POC devices in urinary analysis reliant on H 2 O 2 assays.
- 6 March 2025
- Published by Wiley in Advanced Science
- Vol. 12 (20) , e2500365
Open AccessPrussian‐Blue Catalysis and NFC Synergy: a Battery‐Free Laser‐Induced Graphene‐Based Platform for Urine Glucose Monitoring at Point‐of‐Care
Prussian‐blue nanoparticles (PBNPs) show promise in electrochemical hydrogen peroxide (H 2 O 2 ) sensing but face operational stability challenges without complex strategies. This study introduces a simplified, polymer‐based synthesis method, enhancing their stability in a single step. Chemical polymerization of Prussian‐blue (PB) and poly(3,4‐ethylenedioxythiophene) (PEDOT) with gelatin as a polycationic soft template yields a self‐assembled PB‐infused Catalytic Hetero‐interface Architecture (PB‐CHIA) that remarkably improves the stability of PBNPs and offers functional groups for enzyme immobilization, supporting robust biosensing applications. The softened PEDOT rigidity extends PB‐CHIA's applicability to various carbonaceous electrode substrates, including glassy carbon and laser‐induced graphene (LIG) via simple drop‐casting. A fluidic cell module designed with the optimized LIG morphology (nano‐fibrous fringes, LIG‐F, diameter: 72.87 ± 12.24 nm) modified with PB‐CHIA and glucose oxidase enables non‐invasive urine glucose monitoring. The configuration accurately quantifies glucose within a linear range of 10–400 µM [R 2 : 0.991, Sensitivity: 29.88 ± 4.98 µA mM⁻¹ cm⁻ 2 , Detection Limit: 4.52 ± 2.24 µM], covering medical needs. A near‐field communication potentiostat is devised for a fully integrated, batteryless, wireless point‐of‐care (POC) prototype, enabling rapid smartphone readouts in 15 s for daily home‐based use. The stable operation of PB‐CHIA allows working electrodes’ scalable production, highlighting its potential for diverse POC devices in urinary analysis reliant on H 2 O 2 assays.
- Open Access
The Cleanroom‐Free, Cheap, and Rapid Fabrication of Nanoelectrodes with Low zM Limits of Detection
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal‐to‐noise ratio as electrode dimensions decrease, make them ideal for the development of low‐concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time‐consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than €0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three‐electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS‐CoV‐2 and found to display single molecule sensitivity.
Open AccessThe Cleanroom‐Free, Cheap, and Rapid Fabrication of Nanoelectrodes with Low zM Limits of Detection
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal‐to‐noise ratio as electrode dimensions decrease, make them ideal for the development of low‐concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time‐consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than €0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three‐electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS‐CoV‐2 and found to display single molecule sensitivity.
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 61-66
A Geometric Modeling Approach for Flexible, Printed Square Planar Inductors under Stretch
In this work a compact model for square planar inductors printed on flexible substrate is proposed. The approach considers the deformation of the metal traces of square spiral inductors when the substrate is subjected to physical stretch. The model considers a typical pi-network for the device, where each component is calculated for different stretching values adapting widely accepted models on the literature for the total inductance, the AC resistance and the ground coupling and inter-wounding capacitances. Model results are contrasted to 3D full electromagnetic wave simulations under parametric sweeps of the dimensions calculated under stretch. Results show good agreement within a 20 % stretch up to the first resonance frequency of the structure. The model can prove useful for the optimization of component design for printed applications on flexible substrates.
- 11 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 61-66
A Geometric Modeling Approach for Flexible, Printed Square Planar Inductors under Stretch
In this work a compact model for square planar inductors printed on flexible substrate is proposed. The approach considers the deformation of the metal traces of square spiral inductors when the substrate is subjected to physical stretch. The model considers a typical pi-network for the device, where each component is calculated for different stretching values adapting widely accepted models on the literature for the total inductance, the AC resistance and the ground coupling and inter-wounding capacitances. Model results are contrasted to 3D full electromagnetic wave simulations under parametric sweeps of the dimensions calculated under stretch. Results show good agreement within a 20 % stretch up to the first resonance frequency of the structure. The model can prove useful for the optimization of component design for printed applications on flexible substrates.