Büşra Akkaya
Research Subjects
Büşra Akkaya has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Yagmur Sener
No affiliation
1 shared publication- Yasemin Derya Fidancıoğlu
Department of Pediatric Dentistry, Faculty of Dentistry, Necmettin Erbakan University, Konya 42090, Turkey
1 shared publication - Yağmur Şener
Necmettin Erbakan University, Faculty of Dentistry, Department of Pediatric Dentistry, Konya, Turkey
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Dental Sciences
- Vol. 30 (3) , 422-429
Qualitative Analysis of Infoveillance and Readability of Online Texts About Early Childhood Caries
Objective: The study aimed to assess the quality and readability of web-based information regarding the early childhood caries (ECC). Material and Methods: An internet search using ten different search terms was conducted using the Google search engine. The study was conducted in English on a total of 300 websites by a pediatric dentist. Only official and governmental websites were included in the study. The websites were evaluated for quality based on the Journal of the American Medical Association (JAMA) benchmark criteria, the DISCERN, and Ensuring quality information for patients (EQIP toolkits). The readability formulas Flesch-Kincaid reading ease, the FleschKincaid grade level, Simple Measure of Gobbledygook reading grade level were used to analyze readability. The data obtained was analyzed with the SPSS 23 program, and p<0.05 was accepted as the statistically significant. Results: No website has reached an excellent DISCERN score. More than half of the websites did not meet any of the JAMA criteria. Only 3 of the websites met all JAMA criteria. When the total EQIP score was evaluated, it was determined that the websites showed a low-medium level of information quality. The mean reading level was 8th to 9th grade and considered standard to read. Only 7 websites were measured as difficult to read. Conclusion: The results of the conducted study showed that the information shared about ECC on websites were mostly poor in terms of quality, according to the readability formulas it was found to be significantly higher than the recommended 6th grade education level.
- 1 January 2024
- Published by Turkiye Klinikleri in Turkiye Klinikleri Journal of Dental Sciences
- Vol. 30 (3) , 422-429
Open AccessQualitative Analysis of Infoveillance and Readability of Online Texts About Early Childhood Caries
Objective: The study aimed to assess the quality and readability of web-based information regarding the early childhood caries (ECC). Material and Methods: An internet search using ten different search terms was conducted using the Google search engine. The study was conducted in English on a total of 300 websites by a pediatric dentist. Only official and governmental websites were included in the study. The websites were evaluated for quality based on the Journal of the American Medical Association (JAMA) benchmark criteria, the DISCERN, and Ensuring quality information for patients (EQIP toolkits). The readability formulas Flesch-Kincaid reading ease, the FleschKincaid grade level, Simple Measure of Gobbledygook reading grade level were used to analyze readability. The data obtained was analyzed with the SPSS 23 program, and p<0.05 was accepted as the statistically significant. Results: No website has reached an excellent DISCERN score. More than half of the websites did not meet any of the JAMA criteria. Only 3 of the websites met all JAMA criteria. When the total EQIP score was evaluated, it was determined that the websites showed a low-medium level of information quality. The mean reading level was 8th to 9th grade and considered standard to read. Only 7 websites were measured as difficult to read. Conclusion: The results of the conducted study showed that the information shared about ECC on websites were mostly poor in terms of quality, according to the readability formulas it was found to be significantly higher than the recommended 6th grade education level.
- Open Access
- 1 January 2024
- Published by ASOS Yayinevi in European Journal of Research in Dentistry
- Vol. Cilt:8 Say (Cilt:8 Say) , 14-25
The Effects of Different Surface Preparation Techniques on Enamel Surface Properties and Bond Strength
The purpose of this study was to investigate the morphological and chemical changes and bond strength on enamel surfaces subjected to different surface preparation. The samples were evaluated in in vitro tests with 7 different groups(acid etching, Er:YAG laser QSP mode, and Er:YAG laser MSP mode, Air-Flow, and combinations with acid). Surface profilometer and AFM were used to evaluate the surface roughness. After the surface treatment, the chemical changes were analyzed using SEM-EDS. The effects of preparation technique on the bond strength to the enamel surface were evaluated by using micro tensile and shear bond strength tests. The values obtained the surface roughness evaluation of surface profilometer and AFM were compatible with each other. The highest roughness value was found in QSP when all groups were compared. Ca/P ratios of the surfaces were evaluated as a result of SEM-EDS analysis and it was observed that Ca/P ratio increased in all groups except Acid. It was seen that the results obtained for all groups of micro tensile and shear bond strength tests were consistent with each other. In conclusion, it is considered the use of Er:YAG laser QSP settings with acid can effect the long-term success of restorations clinically.
- 1 January 2024
- Published by ASOS Yayinevi in European Journal of Research in Dentistry
- Vol. Cilt:8 Say (Cilt:8 Say) , 14-25
Open AccessThe Effects of Different Surface Preparation Techniques on Enamel Surface Properties and Bond Strength
The purpose of this study was to investigate the morphological and chemical changes and bond strength on enamel surfaces subjected to different surface preparation. The samples were evaluated in in vitro tests with 7 different groups(acid etching, Er:YAG laser QSP mode, and Er:YAG laser MSP mode, Air-Flow, and combinations with acid). Surface profilometer and AFM were used to evaluate the surface roughness. After the surface treatment, the chemical changes were analyzed using SEM-EDS. The effects of preparation technique on the bond strength to the enamel surface were evaluated by using micro tensile and shear bond strength tests. The values obtained the surface roughness evaluation of surface profilometer and AFM were compatible with each other. The highest roughness value was found in QSP when all groups were compared. Ca/P ratios of the surfaces were evaluated as a result of SEM-EDS analysis and it was observed that Ca/P ratio increased in all groups except Acid. It was seen that the results obtained for all groups of micro tensile and shear bond strength tests were consistent with each other. In conclusion, it is considered the use of Er:YAG laser QSP settings with acid can effect the long-term success of restorations clinically.
- Open Access
- 4 September 2023
- Published by Wiley
The Effects of Different Surface Preparation Techniques on Enamel Surface Properties and Bond Strength
The purpose of this study was to investigate the morphological and chemical changes and bond strength on enamel surfaces subjected to different surface preparation techniques. Two different settings of Er:YAG laser and air-polishing systems were used to prepare the enamel surfaces besides the conventional acid application. The samples were evaluated in in vitro tests with 7 different groups (acid etching, Er:YAG laser quantum square pulse(QSP) mode, and Er:YAG laser medium-short pulse(MSP) mode at 10Hz,1.2W,120mJ, Air-Flow, and its combination with acid). Surface profilometer and AFM were used to evaluate the surface roughness of the specimens. After the surface treatment, the chemical changes that occured on enamel were analyzed using SEM-EDS. The effects of preparation technique on the bond strength to the enamel surface were evaluated by using micro tensile and shear bond strength tests. The values obtained the surface roughness evaluation of surface profilometer and AFM were compatible with each other. The highest roughness value was found in QSP when all groups were compared. Ca/P ratios of the surfaces were evaluated as a result of SEM-EDS analysis and it was observed that Ca/P ratio increased in all groups except Acid. It was seen that the results obtained for all groups of micro tensile and shear bond strength tests were consistent with each other. The highest values were observed in QSP+Acid, while the lowest values were observed in Air-Flow. In conclusion, it is considered the use of Er:YAG laser QSP settings with acid can effect the long-term success of restorations clinically.
- 4 September 2023
- Published by Wiley
Open AccessThe Effects of Different Surface Preparation Techniques on Enamel Surface Properties and Bond Strength
The purpose of this study was to investigate the morphological and chemical changes and bond strength on enamel surfaces subjected to different surface preparation techniques. Two different settings of Er:YAG laser and air-polishing systems were used to prepare the enamel surfaces besides the conventional acid application. The samples were evaluated in in vitro tests with 7 different groups (acid etching, Er:YAG laser quantum square pulse(QSP) mode, and Er:YAG laser medium-short pulse(MSP) mode at 10Hz,1.2W,120mJ, Air-Flow, and its combination with acid). Surface profilometer and AFM were used to evaluate the surface roughness of the specimens. After the surface treatment, the chemical changes that occured on enamel were analyzed using SEM-EDS. The effects of preparation technique on the bond strength to the enamel surface were evaluated by using micro tensile and shear bond strength tests. The values obtained the surface roughness evaluation of surface profilometer and AFM were compatible with each other. The highest roughness value was found in QSP when all groups were compared. Ca/P ratios of the surfaces were evaluated as a result of SEM-EDS analysis and it was observed that Ca/P ratio increased in all groups except Acid. It was seen that the results obtained for all groups of micro tensile and shear bond strength tests were consistent with each other. The highest values were observed in QSP+Acid, while the lowest values were observed in Air-Flow. In conclusion, it is considered the use of Er:YAG laser QSP settings with acid can effect the long-term success of restorations clinically.
- 28 August 2023
- Published by Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEU Dent J), Necmettin Erbakan University in Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEUDentJ), Necmettin Erbakan
Clinical Evaluation and Microleakage of Fissure Sealant: Effect of Laser Etching vs Acid Etching
Aim: The aim of this study was to evaluate the clinical success and the sealing ability of a resin based fissure sealant that applied enamel surface which was etched with conventional phosphoric acid and Er:YAG laser at different energy levels. Material and Methods: The study consisted of two parts; the evaluation of retention, marginal discoloration, marginal integrity and new caries formation for the clinical success after the treatment at 3, 6, 12 months; the evaluation of microleakage and penetration depth to fissures using dye penetration test. The in vivo part of the study was the surface preparation processes, 72 teeth in each group; It consists of 32% phosphoric Acid, Er:YAG laser- MSP (Medium Short Pulse) and Er:YAG laser- QSP (Quantum Square Pulse). A total of 45 impacted human third molar teeth were used for in vitro part. Data were analyzed using SPSS 21. Results: The relationship between the success rates of 12-month clinical follow-up of fissure sealants and age, gender, and localization was assessed and there was no statistically significant correlation. When all criteria were considered, the most successful group was QSP. All the groups demonstrated microleakage regardless of the surface preparation techniques. However, there was no statistically significant difference between the groups. Conclusion: It is considered to determine the optimal energy level of laser will increase the clinical success.
- 28 August 2023
- Published by Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEU Dent J), Necmettin Erbakan University in Necmettin Erbakan Universitesi Dis Hekimligi Dergisi (NEUDentJ), Necmettin Erbakan
Clinical Evaluation and Microleakage of Fissure Sealant: Effect of Laser Etching vs Acid Etching
Aim: The aim of this study was to evaluate the clinical success and the sealing ability of a resin based fissure sealant that applied enamel surface which was etched with conventional phosphoric acid and Er:YAG laser at different energy levels. Material and Methods: The study consisted of two parts; the evaluation of retention, marginal discoloration, marginal integrity and new caries formation for the clinical success after the treatment at 3, 6, 12 months; the evaluation of microleakage and penetration depth to fissures using dye penetration test. The in vivo part of the study was the surface preparation processes, 72 teeth in each group; It consists of 32% phosphoric Acid, Er:YAG laser- MSP (Medium Short Pulse) and Er:YAG laser- QSP (Quantum Square Pulse). A total of 45 impacted human third molar teeth were used for in vitro part. Data were analyzed using SPSS 21. Results: The relationship between the success rates of 12-month clinical follow-up of fissure sealants and age, gender, and localization was assessed and there was no statistically significant correlation. When all criteria were considered, the most successful group was QSP. All the groups demonstrated microleakage regardless of the surface preparation techniques. However, there was no statistically significant difference between the groups. Conclusion: It is considered to determine the optimal energy level of laser will increase the clinical success.