Dinh Trung Pham
Research Subjects
Dinh Trung Pham has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Hien Duy Tong
Faculty of Engineering, Vietnamese-German University (VGU), Ring road 4, Quarter 4, Thoi Hoa Ward, Ho Chi Minh City, Vietnam
6 shared publications - Anh Tuan Hoang
University of Transport Ho Chi Minh City
2 shared publications - Van Hung Bui
The University of Danang , Viet Nam
2 shared publications Cristina Efremov
1 shared publicationDao Nam Cao
1 shared publicationDiep Ngoc Long Huynh
1 shared publication
Latest Publications
- 18 August 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (33) , 335914
Janus Al 2 Si 2 X 3 Y 3 (X/Y = S, Se, Te) monolayers: a first-principles investigation of structural, electronic, optical, and transport properties
First-principles calculations were performed to investigate Janus Al 2 Si 2 X 3 Y 3 (X/Y = S, Se, Te) monolayers as two-dimensional semiconductors for optoelectronic applications. Phonon spectra, ab initio molecular dynamics at 300 K, and elastic constants confirm their dynamical, thermal, and mechanical stability. The lattice constant and thickness increase from 6.10 to 6.56 Å and from 3.19 to 3.42 Å, respectively, whereas the in-plane Young’s modulus decreases from 92.70 to 75.13 N m − 1 with heavier chalcogen substitution. All three monolayers are semiconductors with HS 10 06 band gaps of 3.15, 1.26, and 1.67 eV for Al 2 Si 2 S 3 Se 3 , Al 2 Si 2 S 3 Te 3 , and Al 2 Si 2 Se 3 Te 3 , respectively. Janus asymmetry induces intrinsic electrostatic polarity with side-dependent work-function differences of 0.18–0.46 eV. The Te-containing systems show broader optical absorption, with coefficients on the order of 10 5 . Carrier-transport calculations reveal nearly isotropic in-plane behavior and pronounced electron-dominated mobility, reaching 1654.03 cm 2 V − 1 s − 1 in Al 2 Si 2 Se 3 Te 3 . These results identify Janus Al 2 Si 2 X 3 Y 3 monolayers as promising candidates for multifunctional nanoelectronic and optoelectronic devices.
- 18 August 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (33) , 335914
Janus Al 2 Si 2 X 3 Y 3 (X/Y = S, Se, Te) monolayers: a first-principles investigation of structural, electronic, optical, and transport properties
First-principles calculations were performed to investigate Janus Al 2 Si 2 X 3 Y 3 (X/Y = S, Se, Te) monolayers as two-dimensional semiconductors for optoelectronic applications. Phonon spectra, ab initio molecular dynamics at 300 K, and elastic constants confirm their dynamical, thermal, and mechanical stability. The lattice constant and thickness increase from 6.10 to 6.56 Å and from 3.19 to 3.42 Å, respectively, whereas the in-plane Young’s modulus decreases from 92.70 to 75.13 N m − 1 with heavier chalcogen substitution. All three monolayers are semiconductors with HS 10 06 band gaps of 3.15, 1.26, and 1.67 eV for Al 2 Si 2 S 3 Se 3 , Al 2 Si 2 S 3 Te 3 , and Al 2 Si 2 Se 3 Te 3 , respectively. Janus asymmetry induces intrinsic electrostatic polarity with side-dependent work-function differences of 0.18–0.46 eV. The Te-containing systems show broader optical absorption, with coefficients on the order of 10 5 . Carrier-transport calculations reveal nearly isotropic in-plane behavior and pronounced electron-dominated mobility, reaching 1654.03 cm 2 V − 1 s − 1 in Al 2 Si 2 Se 3 Te 3 . These results identify Janus Al 2 Si 2 X 3 Y 3 monolayers as promising candidates for multifunctional nanoelectronic and optoelectronic devices.
- Open Access
- 6 June 2026
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 83
Performance and emission characteristics of compression ignition engines fueled with oxyhydrogen (HHO): Integrated prognostic and optimization framework
- 6 June 2026
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 83
Open AccessPerformance and emission characteristics of compression ignition engines fueled with oxyhydrogen (HHO): Integrated prognostic and optimization framework
- Open Access
- 6 May 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (2) , 85-97
Ensemble Machine Learning and Simulated Annealing for Behaviour Prediction of a Diesel Engine Fuelled with Dimethyl Ether
This study introduces a novel hybrid approach based on ensemble machine learning prediction and simulated annealing for the optimisation and minimisation of emissions from dimethyl ether (DME)-diesel fuel combustion compression ignition engines. Experimental data were obtained from a commercial, four-cylinder, direct injection diesel engine (Model 4113) under different load conditions, with varying blends of DME and diesel. Key emissions (NOx, CO, and HC), the brake mean effective pressure and the blend ratio were measured with high precision by AVL analysers. Multiple regression models were built and compared, including support vector regression (SVR) and XGBoost, with rigorous hyperparameter tuning. SVR yielded better performance for NOx (test R 2 = 0.820) and HC (test R 2 = 0.854), although both models achieved good accuracy for CO (SVR test R 2 = 0.854; XGBoost test R 2 = 0.731). A correlation analysis showed that there was a strong positive link between engine load and NOx, and good HC reduction with higher DME content. The trained ensemble models were implemented as objective functions in a simulated annealing algorithm to achieve multi-objective optimisation of critical engine parameters. The proposed approach has a high level of predictive reliability and effective global search capability, and provides a computationally efficient pathway for emission control in alternative fuel engines. These findings provide support for the broader use of DME as a clean, renewable fuel for compliance with stringent future emission standards.
- 6 May 2026
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 33 (2) , 85-97
Open AccessEnsemble Machine Learning and Simulated Annealing for Behaviour Prediction of a Diesel Engine Fuelled with Dimethyl Ether
This study introduces a novel hybrid approach based on ensemble machine learning prediction and simulated annealing for the optimisation and minimisation of emissions from dimethyl ether (DME)-diesel fuel combustion compression ignition engines. Experimental data were obtained from a commercial, four-cylinder, direct injection diesel engine (Model 4113) under different load conditions, with varying blends of DME and diesel. Key emissions (NOx, CO, and HC), the brake mean effective pressure and the blend ratio were measured with high precision by AVL analysers. Multiple regression models were built and compared, including support vector regression (SVR) and XGBoost, with rigorous hyperparameter tuning. SVR yielded better performance for NOx (test R 2 = 0.820) and HC (test R 2 = 0.854), although both models achieved good accuracy for CO (SVR test R 2 = 0.854; XGBoost test R 2 = 0.731). A correlation analysis showed that there was a strong positive link between engine load and NOx, and good HC reduction with higher DME content. The trained ensemble models were implemented as objective functions in a simulated annealing algorithm to achieve multi-objective optimisation of critical engine parameters. The proposed approach has a high level of predictive reliability and effective global search capability, and provides a computationally efficient pathway for emission control in alternative fuel engines. These findings provide support for the broader use of DME as a clean, renewable fuel for compliance with stringent future emission standards.
- Open Access
- 28 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 76
Transparent artificial intelligence models using sequential minimal optimization and extreme Gradient Boosting for accurate performance prediction of solar farms
- 28 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 76
Open AccessTransparent artificial intelligence models using sequential minimal optimization and extreme Gradient Boosting for accurate performance prediction of solar farms
- Open Access
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (10) , 8060-8071
First-principles study of Ga2Ge2S3Se3 monolayer: a promising photocatalyst for water splitting
The Ga2Ge2S3Se3 monolayer: a promising 2D photocatalyst with high solar-to-hydrogen efficiency, efficient charge separation, and electron mobility.
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (10) , 8060-8071
Open AccessFirst-principles study of Ga2Ge2S3Se3 monolayer: a promising photocatalyst for water splitting
The Ga2Ge2S3Se3 monolayer: a promising 2D photocatalyst with high solar-to-hydrogen efficiency, efficient charge separation, and electron mobility.
- 10 January 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (10) , 105307
Prediction of quaternary SnGeS2As4 monolayer as a promising photocatalyst for water splitting: a DFT study
The SnGeS2As4 monolayer was studied by first-principles calculations to estimate its potential for use as a photocatalyst in the water splitting process. The stability of this structure is confirmed based on the analysis of its phonon dispersion and AIDM simulations. The electronic features including density of states (DOS), band structure, and Bader charge were calculated. These data show the role of each constituent element in the formation of covalent π − and σ − bonds, which play an important role in stabilizing the buckled honeycomb structure. In addition, the DOS and band structure also provide information regarding the high light absorption rate α ( ω ) of 105–106 cm−1. The positions of valence band maximum and conduction band minimum are suitable for generation of hydrogen and oxygen gases. The SnGeS2As4 monolayer also has an optimal work function of 5.16 eV for the water splitting process and a rather high solar-to-hydrogen efficiency η STH ′ = 13.11%. It is worth noting that SnGeS2As4 monolayers with strains ranging from −2% to 6% are still capable of triggering redox reactions in the water splitting process. Moreover, the tensile strains slightly increase the light absorption rates. Such characteristics not only make the SnGeS2As4 monolayer a suitable photocatalyst for water splitting but also ensures its performance in a wider range of applications.
- 10 January 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (10) , 105307
Prediction of quaternary SnGeS2As4 monolayer as a promising photocatalyst for water splitting: a DFT study
The SnGeS2As4 monolayer was studied by first-principles calculations to estimate its potential for use as a photocatalyst in the water splitting process. The stability of this structure is confirmed based on the analysis of its phonon dispersion and AIDM simulations. The electronic features including density of states (DOS), band structure, and Bader charge were calculated. These data show the role of each constituent element in the formation of covalent π − and σ − bonds, which play an important role in stabilizing the buckled honeycomb structure. In addition, the DOS and band structure also provide information regarding the high light absorption rate α ( ω ) of 105–106 cm−1. The positions of valence band maximum and conduction band minimum are suitable for generation of hydrogen and oxygen gases. The SnGeS2As4 monolayer also has an optimal work function of 5.16 eV for the water splitting process and a rather high solar-to-hydrogen efficiency η STH ′ = 13.11%. It is worth noting that SnGeS2As4 monolayers with strains ranging from −2% to 6% are still capable of triggering redox reactions in the water splitting process. Moreover, the tensile strains slightly increase the light absorption rates. Such characteristics not only make the SnGeS2As4 monolayer a suitable photocatalyst for water splitting but also ensures its performance in a wider range of applications.
- Open Access
- 15 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (23) , 15979-15986
A first-principles prediction of the structural, electronic, transport and photocatalytic properties of GaGeX3 (X = S, Se, Te) monolayers
The GaGeSe3 monolayer: a promising 2D material for photocatalysts and electronics with high solar-to-hydrogen conversion efficiency and electron mobility.
- 15 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (23) , 15979-15986
Open AccessA first-principles prediction of the structural, electronic, transport and photocatalytic properties of GaGeX3 (X = S, Se, Te) monolayers
The GaGeSe3 monolayer: a promising 2D material for photocatalysts and electronics with high solar-to-hydrogen conversion efficiency and electron mobility.
- 9 January 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (5) , 4437-4446
First principles study of strain effects on prospective 2D photocatalysts Sn2Se2X4 (X = P, As) with ultra-high charge carrier mobility
Photocatalysts Sn2Se2X4 (X = P, As) with a high light absorption rate and suitable electronic structures for water splitting.
- 9 January 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (5) , 4437-4446
First principles study of strain effects on prospective 2D photocatalysts Sn2Se2X4 (X = P, As) with ultra-high charge carrier mobility
Photocatalysts Sn2Se2X4 (X = P, As) with a high light absorption rate and suitable electronic structures for water splitting.
- 22 August 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (36) , 24459-24467
Monolayer Ge2Te2P4 as a promising photocatalyst for solar driven water-splitting: a DFT study
Promising photocatalytic monolayer Ge2Te2P4 with a high absorption rate and charge carrier mobility.
- 22 August 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (36) , 24459-24467
Monolayer Ge2Te2P4 as a promising photocatalyst for solar driven water-splitting: a DFT study
Promising photocatalytic monolayer Ge2Te2P4 with a high absorption rate and charge carrier mobility.
- Open Access
- 5 September 2016
- Published by Springer Nature in International Journal of Advanced Structural Engineering
- Vol. 8 (4) , 351-361
A contact element for dynamic analysis of beams to a moving oscillator on tensionless elastic foundation
- 5 September 2016
- Published by Springer Nature in International Journal of Advanced Structural Engineering
- Vol. 8 (4) , 351-361
Open AccessA contact element for dynamic analysis of beams to a moving oscillator on tensionless elastic foundation