Swati Verma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Swati Verma has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Manoj Kumar Majumder
Department of Electronics and Communication Engineering, International Institute of Information Technology, Naya Raipur, India
5 shared publications - Kamal Solanki
Department of Electronics and Communication Engineering, International Institute of Information Technology, Naya Raipur, India
4 shared publications - Punya Prasanna Paltani
Department of Electronics and Communication Engineering, DSPM International Institute of Information Technology, Naya Raipur, India
2 shared publications - Pankaj Kumar Das
Sant Longowal Institute of Engineering and Technology, Longowal
1 shared publication - Shivangi Chandrakar
Department of Electronics and Communication Engineering, International Institute of Information Technology, Naya Raipur, Chhattisgarh, India
1 shared publication - Vandana Kumari
Department of Electronics and Communication Engineering, International Institute of Information Technology Naya Raipur, Naya Raipur, India
1 shared publication
Latest Publications
- 28 October 2024
- Published by Springer Nature
- p. 379-393
Chemisorption Analysis of NOx Sensor Using NF/Pr-AGNR: A DFT Investigation
- 28 October 2024
- Published by Springer Nature
- p. 379-393
Chemisorption Analysis of NOx Sensor Using NF/Pr-AGNR: A DFT Investigation
- 2 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 23 (1536125X) , 567-577
Ab Initio Modeling of Doped/Undoped ArGNR Sensors for No2 Detection
Elevated levels of nitrogen dioxide (NO2) pollutants have captured significant attention due to their profound influence on the cardiovascular and respiratory systems; hence, high-performance monitoring systems for pollutants are imperative to safeguard the well-being of individuals. In this regard, a hydrogen-passivated two-probe Armchair Graphene Nanoribbon (ArGNR) gas sensor utilizing a doped/undoped configuration can be considered to mitigate the NO2 pollutants. Therefore, this research, for the first time, examines the influence of channel length and transport properties on the i-v behavior of NO2 pollutants for doped/undoped ArGNR-based sensors. The electronic properties are rigorously examined using the density function theory (DFT) within the linear combination of atomic orbital (LCAO) and semi-empirical computation techniques, leveraging principles derived from non-equilibrium Green's function. In comparison to the undoped ArGNR, the BAs doped ArGNR exhibits superior chemisorption energy of -2.3 eV (with spin effect) and -3.3 eV (without spin effect), coupled with the substantial bandgap variation of -10.22, 36.50% (with spin effect) and 100% (without spin effect), at the B and As sites, respectively. In addition, a high quantum transport spectrum of 57% and significant current variations of 95% and 77% at the B and As sites, respectively, upon the NO2 adsorption. These findings suggest that the B-As-doped ArGNR sensor provides a promising solution for susceptible NO2 detection.
- 2 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 23 (1536125X) , 567-577
Ab Initio Modeling of Doped/Undoped ArGNR Sensors for No2 Detection
Elevated levels of nitrogen dioxide (NO2) pollutants have captured significant attention due to their profound influence on the cardiovascular and respiratory systems; hence, high-performance monitoring systems for pollutants are imperative to safeguard the well-being of individuals. In this regard, a hydrogen-passivated two-probe Armchair Graphene Nanoribbon (ArGNR) gas sensor utilizing a doped/undoped configuration can be considered to mitigate the NO2 pollutants. Therefore, this research, for the first time, examines the influence of channel length and transport properties on the i-v behavior of NO2 pollutants for doped/undoped ArGNR-based sensors. The electronic properties are rigorously examined using the density function theory (DFT) within the linear combination of atomic orbital (LCAO) and semi-empirical computation techniques, leveraging principles derived from non-equilibrium Green's function. In comparison to the undoped ArGNR, the BAs doped ArGNR exhibits superior chemisorption energy of -2.3 eV (with spin effect) and -3.3 eV (without spin effect), coupled with the substantial bandgap variation of -10.22, 36.50% (with spin effect) and 100% (without spin effect), at the B and As sites, respectively. In addition, a high quantum transport spectrum of 57% and significant current variations of 95% and 77% at the B and As sites, respectively, upon the NO2 adsorption. These findings suggest that the B-As-doped ArGNR sensor provides a promising solution for susceptible NO2 detection.
- Open Access
- 24 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Nanotechnology
- Vol. 4, 215-228
Impact of Specific PM2.5 Contaminant on Monolayer/Bilayer ArGNR
Elevated Particular Matter (PM 2.5 ) may increase the risk of acquiring hazardous health implications, and hence high-performance monitoring of minuscule contaminants might protect people's health. The adsorption behaviour of specific PM 2.5 contaminants on doped/undoped monolayer/bilayer armchair graphene nanoribbon (ArGNR) is analyzed using a hydrogen-passivated layer. By using the first-principles density functional theory (DFT), the influence of doping on the ArGNR substrate is carefully examined. Due to the fragile surface atoms, monolayer ArGNR exhibits roughly twice the adsorption energy compared to the bilayer configuration. However, the specific PM 2.5 contaminants, the CH 4 , NH 3 , and NO 2 molecules demonstrate chemisorption of -2 eV ,-2.95 eV, and -4 eV, with extremely less bandgap variation of -65% to -70% and -100% and a gigantic amount of charge transfer of +0.153 eV, +0.156 eV and +0.010 eV, and the DOS peaks at B site are ±110 eV, ±65 eV, ±80 eV, and at the P site are ±130 eV, ±300 eV and ±80 eV on boron-phosphorus (BP) co-doped monolayer ArGNR, for CH 4 , NH 3, and NO 2 , respectively.
- 24 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Nanotechnology
- Vol. 4, 215-228
Open AccessImpact of Specific PM2.5 Contaminant on Monolayer/Bilayer ArGNR
Elevated Particular Matter (PM 2.5 ) may increase the risk of acquiring hazardous health implications, and hence high-performance monitoring of minuscule contaminants might protect people's health. The adsorption behaviour of specific PM 2.5 contaminants on doped/undoped monolayer/bilayer armchair graphene nanoribbon (ArGNR) is analyzed using a hydrogen-passivated layer. By using the first-principles density functional theory (DFT), the influence of doping on the ArGNR substrate is carefully examined. Due to the fragile surface atoms, monolayer ArGNR exhibits roughly twice the adsorption energy compared to the bilayer configuration. However, the specific PM 2.5 contaminants, the CH 4 , NH 3 , and NO 2 molecules demonstrate chemisorption of -2 eV ,-2.95 eV, and -4 eV, with extremely less bandgap variation of -65% to -70% and -100% and a gigantic amount of charge transfer of +0.153 eV, +0.156 eV and +0.010 eV, and the DOS peaks at B site are ±110 eV, ±65 eV, ±80 eV, and at the P site are ±130 eV, ±300 eV and ±80 eV on boron-phosphorus (BP) co-doped monolayer ArGNR, for CH 4 , NH 3, and NO 2 , respectively.
- 18 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (11) , 1734-1742
Reliability Concerns of TSV-Based 3-D Integration: Impact of Interfacial Crack
The demands for improved performance, lower cost, and better signal integrity in three-dimensional (3D) packaging technology led to the development of Through Silicon Via (TSV). However, TSV fabrication, testing, and services primarily induce undesirable thermo-mechanical stress during thermal cycling. It initiates micro-cracks (popularly known as interfacial cracks) across interfaced layers of TSV due to a coefficient of thermal expansion (CTE) mismatch. This paper for the first time presents a comprehensive analysis of via parasitic, that adversely affects the electrical characteristics of TSVs considering the heating and cooling scenario of interfacial cracks. It comprises a novel equivalent electrical circuit that includes fault modeling as well as reliability concerns in terms of crosstalk-induced delay, power dissipation, energy release rate, and S-parameter. The metal-oxide-semiconductor (MOS) effect is considered to model the via faults at various crack widths. Using a CMOS-based driver-via-load setup at 32 nm technology, the proposed electrical model is used to analyze the crosstalk, power, and losses considering both the heating and cooling modes. A closer validation of the obtained results demonstrates a good agreement with the experimental data for an approximate deviation of 2.5% in the scattering parameter. Furthermore, it is elucidated that the cooling mode is 14.58% more vulnerable than the heating in terms of power delay product (PDP) by considering height and crack width of 9.6μm and 1.79μm, respectively.
- 18 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (11) , 1734-1742
Reliability Concerns of TSV-Based 3-D Integration: Impact of Interfacial Crack
The demands for improved performance, lower cost, and better signal integrity in three-dimensional (3D) packaging technology led to the development of Through Silicon Via (TSV). However, TSV fabrication, testing, and services primarily induce undesirable thermo-mechanical stress during thermal cycling. It initiates micro-cracks (popularly known as interfacial cracks) across interfaced layers of TSV due to a coefficient of thermal expansion (CTE) mismatch. This paper for the first time presents a comprehensive analysis of via parasitic, that adversely affects the electrical characteristics of TSVs considering the heating and cooling scenario of interfacial cracks. It comprises a novel equivalent electrical circuit that includes fault modeling as well as reliability concerns in terms of crosstalk-induced delay, power dissipation, energy release rate, and S-parameter. The metal-oxide-semiconductor (MOS) effect is considered to model the via faults at various crack widths. Using a CMOS-based driver-via-load setup at 32 nm technology, the proposed electrical model is used to analyze the crosstalk, power, and losses considering both the heating and cooling modes. A closer validation of the obtained results demonstrates a good agreement with the experimental data for an approximate deviation of 2.5% in the scattering parameter. Furthermore, it is elucidated that the cooling mode is 14.58% more vulnerable than the heating in terms of power delay product (PDP) by considering height and crack width of 9.6μm and 1.79μm, respectively.
- 31 August 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (5) , 5139-5148
Adsorption Analysis at Critical Temperature of PM 2.5 Contaminants
- 31 August 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (5) , 5139-5148
Adsorption Analysis at Critical Temperature of PM 2.5 Contaminants