Dani Harmanto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dani Harmanto has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Arie Indartono1 shared publication
Eko Julianto
Shipbuilding Institute of Polytechnic Surabaya (PPNS)
1 shared publication- Joewono Prasetijo
Universiti Tun Hussein Onn Malaysia
1 shared publication - Mohammad Basuki Rahmat
Shipbuilding Institute of Polytechnic Surabaya
1 shared publication - Muyiwa Oyinlola
Institute of Energy and Sustainable Development, De Montfort University, Leicester LE1 9BH, UK
1 shared publication - Nittalin Phunapai
Innovative Development, Automation System and Sustainability Laboratory (I-DASS Lab), Department of Mechanical Engineering, Faculty of Engineering, Srinakharinwirot University, Bangkok 10110, Thailand
1 shared publication
Latest Publications
- Open Access
Optimizing Solar Parabolic Trough Receivers with External Fins: An Experimental Study on Enhancing Heat Transfer and Thermal Efficiency
Several researchers have shown that the heat transfer performance of solar parabolic trough (SPT) receivers may be improved by increasing their surface area or by adding internal fins to the tubes. Unfortunately, the manufacture of internally finned tubes involves complex processes, resulting in significant cost increases. On the other hand, the addition of external fins to tubes is more technically and economically feasible in a low-resource setting. This study investigates the potential benefits of integrating external fins on the receiver tubes of a low-cost SPT collector system. Experiments were conducted using an SPT system with a focal length of 300 mm and a collector length of 5.1 m, and they were positioned by an automated Sun tracking system. Tests were undertaken using both smooth and externally finned receiver tubes operating at five different water flow rates. The solar receiver with a finned tube was able to provide a maximum water temperature of 59.34 °C compared with that of 56.52 °C for a smooth tube at a flow rate of 0.5 L per minute. The externally finned absorber tube was also found to have a maximum efficiency of 18.20% at an average daily solar intensity of 834.61 W/m2, which is approximately 48% more efficient than the smooth tube. The calculations indicate that the experimental SPT system using finned tubes potentially avoids 0.2726 metric tons of CO2e per year, with finned tubes outperforming smooth tubes by up to 44%. The results show that using externally finned receiver tubes can significantly enhance the thermal performance of SPT collector systems.
Open AccessOptimizing Solar Parabolic Trough Receivers with External Fins: An Experimental Study on Enhancing Heat Transfer and Thermal Efficiency
Several researchers have shown that the heat transfer performance of solar parabolic trough (SPT) receivers may be improved by increasing their surface area or by adding internal fins to the tubes. Unfortunately, the manufacture of internally finned tubes involves complex processes, resulting in significant cost increases. On the other hand, the addition of external fins to tubes is more technically and economically feasible in a low-resource setting. This study investigates the potential benefits of integrating external fins on the receiver tubes of a low-cost SPT collector system. Experiments were conducted using an SPT system with a focal length of 300 mm and a collector length of 5.1 m, and they were positioned by an automated Sun tracking system. Tests were undertaken using both smooth and externally finned receiver tubes operating at five different water flow rates. The solar receiver with a finned tube was able to provide a maximum water temperature of 59.34 °C compared with that of 56.52 °C for a smooth tube at a flow rate of 0.5 L per minute. The externally finned absorber tube was also found to have a maximum efficiency of 18.20% at an average daily solar intensity of 834.61 W/m2, which is approximately 48% more efficient than the smooth tube. The calculations indicate that the experimental SPT system using finned tubes potentially avoids 0.2726 metric tons of CO2e per year, with finned tubes outperforming smooth tubes by up to 44%. The results show that using externally finned receiver tubes can significantly enhance the thermal performance of SPT collector systems.
- Open Access
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7)
The Potential of Floating House as A Solution For The Utilization of Water Area In Indonesia
Indonesia is a large country that has a large water surface and land area. Various areas are almost found on the surface of the area. The natural potential has not been touched as a whole in the transportation sector. Water transportation management is still limited to certain areas. In detail, Indonesia's land area is 1,919,440 km². While the ocean area is about 3,273,810 km².The potential for water transportation can still be developed widely, including tourism potential. The use of floating homes as a means of transportation will develop well if there is innovation and management of water transportation in the territory of Indonesia. Variations Structures and designs that adapt to the natural conditions of certain areas will further enhance other potentials and must be carried out from now on. In addition, it is also necessary to increase reliable human resources for the development of floating ship transportation and the availability of good port infrastructure adjustments
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7)
Open AccessThe Potential of Floating House as A Solution For The Utilization of Water Area In Indonesia
Indonesia is a large country that has a large water surface and land area. Various areas are almost found on the surface of the area. The natural potential has not been touched as a whole in the transportation sector. Water transportation management is still limited to certain areas. In detail, Indonesia's land area is 1,919,440 km². While the ocean area is about 3,273,810 km².The potential for water transportation can still be developed widely, including tourism potential. The use of floating homes as a means of transportation will develop well if there is innovation and management of water transportation in the territory of Indonesia. Variations Structures and designs that adapt to the natural conditions of certain areas will further enhance other potentials and must be carried out from now on. In addition, it is also necessary to increase reliable human resources for the development of floating ship transportation and the availability of good port infrastructure adjustments