XPXiaohan Peng

Xiaohan Peng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaohan Peng has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Size Effect on Shear Behaviors of 3D-Printed Soft Rock-like Materials Under Different Shear Velocities

    by Chaolei Wu, Lishuai Jiang, Yang Zhao, Qi Wu, Yiming Yang, Xiaohan Peng, Pimao Li

    The shear failure of rock masses is one of the primary causes of underground engineering instability. The shear mechanical behavior of rocks at different sizes is of great significance for studying the shear failure pattern of engineering rock masses. However, due to the presence of various joints and defects in natural rocks, the obtained rock specimens exhibit significant discreteness, making it difficult to customize specimen sizes for size effect studies. In recent years, 3D printing (3DP) technology has gained widespread application in rock mechanics tests due to its high printing precision and ability to form specimens in a single step with minimal discreteness. Among these, specimens prepared using sand-powder 3DP exhibit elastoplastic mechanical characteristics similar to those of natural rocks. Therefore, this study utilized sand-powder 3DP to prepare rock-like specimens of four different sizes and conducted compression shear tests under three different shear velocities. The shear strength, shear strain, and wear of the shear surfaces were analyzed as functions of specimen size and shear velocities. The results indicate that under the same shear velocity, the shear strength of the specimens is negatively correlated with specimen size. The peak shear strain is generally unaffected by shear velocities, but it increases initially and then decreases with increasing specimen size. As specimen size increases, the degree of specimen damage intensifies, and larger specimens are more prone to developing derived fractures. This study broadens the application of sand-powder 3DP technology in investigating the shear mechanical properties of soft rocks, offering novel insights into the study of size effects in rock mechanics. However, the current research does not encompass tests on 3D-printed rock specimens with varying printing directions, nor does it delve into the role of fractures in size effect analyses. Future investigations will aim to address these limitations, thereby advancing the applicability of 3D printing technology in rock mechanics research and enhancing its contributions to the field.


  • Open Access

    Size Effect on Shear Behaviors of 3D Printed Soft Rock-like Materials under Different Shear Velocities

    by Chaolei Wu, Lishuai Jiang, Yang Zhao, Qi Wu, Yiming Yang, Xiaohan Peng, Pimao Li

    The shear failure of rock masses is one of the primary causes of underground engineering instability. The shear mechanical behavior of rocks at different sizes is of great significance for studying the shear failure pattern of engineering rock masses. However, due to the presence of various joints and defects in natural rocks, the obtained rock specimens exhibit significant discreteness, making it difficult to customize specimen sizes for size effect studies. In recent years, 3D printing (3DP) technology has gained widespread application in rock mechanics test due to its high printing precision, ability to form specimens in a single step with minimal discreteness. Among these, specimens prepared using sand-powder 3DP exhibit elastoplastic mechanical characteristics similar to those of natural rocks. Therefore, this study utilized sand-powder 3DP to prepare rock-like specimens in four different sizes and conducted compression-shear tests under three different shear velocities. The shear strength, shear strain, and wear of the shear surfaces were analyzed as functions of specimen size and shear velocities. The results indicate that, under the same shear velocity, the shear strength of the specimens is negatively correlated with specimen size; The peak shear strain is generally unaffected by shear velocities, but it increases initially and then decreases with increasing specimen size; As specimen size increases, the degree of specimen damage intensifies, and larger specimens are more prone to developing derived fractures. The study's findings contribute to expanding the applicability of sand-powder 3DP in the research of shear mechanical properties of soft rocks and provide a critical basis for accurately and scientifically selecting appropriate rock specimen sizes for laboratory tests.

  • Open Access

    Numerical Analysis on the Influence of Joint Density on the Stability of Complex Jointed Roadway Surrounding Rock

    by Wenhai Wang, Chaolei Wu, Yiming Yang, Xiaohan Peng, Lishuai Jiang, Yifeng Huang

    The random distribution of a complex joint network within a coal–rock mass has a significant weakening effect on its bearing capacity, making the surrounding rock of the roadway highly susceptible to instability and failure under the influence of in situ stress and mining-induced stress. This poses challenges in controlling the surrounding rock and seriously affects the normal production of mines. Consequently, it is imperative to conduct stability analysis on complex jointed roadway surrounding rock. Therefore, taking the transport roadway of Panel 11030 in the Zhaogu No. 2 Coal Mine as a case study, the microscopic contact parameters of particles and joint surfaces in each rock layer were calibrated through uniaxial compression and shear simulation tests using the particle flow simulation software PFC2D 5.0. Based on the calibrated microscopic contact parameters, a multilayered roadway surrounding rock model containing complex joints was established, and the joint density was quantified to analyze its effects on the displacement field, stress field, force chain field, and energy field of the roadway surrounding rock. The research findings indicate that as the distance to the sidewall decreases, the impact of joint density on the deformation of the surrounding rock of the roadway increases. The displacement of the roadway roof, floor, and sidewalls is affected differently by the joint density, predominantly contingent upon the properties of the rock mass. During the process of stress redistribution in the surrounding rock, the vertical stress of the roof and floor is released more intensively compared to the horizontal stress, while the horizontal stress of the sidewalls is released more intensively compared to the vertical stress. The increase in joint density leads to an increasing release rate of the surrounding rock stress, causing the load-bearing rock mass to transfer towards the deeper part. As the joint density increases, the force chain network gradually transitions from dense to sparse, resulting in a decrease in strong force chains and a decline in the bearing capacity of the surrounding rock, accompanied by an expansion in the range of force chain failure and deformation. With the continuous increase in joint density, the values of maximum released kinetic energy and residual released kinetic energy become larger. Once the joint density reaches a certain threshold, the kinetic energy stability zone consistently maintains a high energy level, indicating extreme instability in the roadway and sustained deformation. The results provide a valuable insight for analyzing the failure mechanism of complex jointed roadway surrounding rock and implementing corresponding support measures.