Vikram Maurya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vikram Maurya has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Sarthak Singhal
Department of ECE, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
15 shared publications Shashank Kumar Yadav
3 shared publications- Toufeeq Ahmed
Malaviya National Institute of Technology
2 shared publications Bhoomi
1 shared publicationPancham Kumar
Department of ECE, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
1 shared publicationSarthak Singhal
1 shared publication
Latest Publications
- 1 July 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 33 (4: Photoni) , 4700108
Ni-Pi-Ni Based Asterisk Shaped Highly Efficient Solar Energy Harvester
- 1 July 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 33 (4: Photoni) , 4700108
Ni-Pi-Ni Based Asterisk Shaped Highly Efficient Solar Energy Harvester
- 10 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-8
Dual-Mode Linear Cross-Polarization Converter-Based Highly Sensitive Refractive Index Sensor
A multiarm Z-shaped resonator and slot-based wideband dual-mode terahertz (THz) linear cross-polarization converter (LCPC) for refractive index-based biosensing applications is proposed. It has a unitcell volume of $0.134\lambda _{\mathrm {L}} \times 0.093\lambda _{\mathrm {L}} \times 0.061\lambda _{\mathrm {L}}$ ( $\lambda _{\mathrm {L}} =148.5$ $\mu $ m) while exhibiting reflective polarization conversion ratio (PCR ${}_{\mathrm {rx}}) \ge 80$ % across 2.02–6.59 THz and transmissive polarization conversion ratio (PCR ${}_{\mathrm {tx}}) \ge 80$ % across the spectrum of 3.67–3.91 THz and 6.43–7.29 THz. Physical phenomenon behind the polarization conversions is studied through electric field distribution. It has stable PCR ${}_{\mathrm {rx}} \ge 80$ % performance for incidence angles up to 30°. Its maximal sensitivity (S ${}_{\max }$ ) as a refractive index sensor is 618 GHz/RIU using PCRrx and 792 GHz/RIU using PCRtx. Its biosensor configuration has a Smax of 4.95 THz/RIU (PCR ${}_{\mathrm {tx}}$ ) and 16.76 THz/RIU (PCR ${}_{\mathrm {rx}}$ ). The proposed polarization converter’s wideband performance, dual-mode sensing capability, high sensitivity, and compact dimensions indicate that it is suitable for a variety of applications, such as wireless communication, biosensing, imaging, and security screening.
- 10 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-8
Dual-Mode Linear Cross-Polarization Converter-Based Highly Sensitive Refractive Index Sensor
A multiarm Z-shaped resonator and slot-based wideband dual-mode terahertz (THz) linear cross-polarization converter (LCPC) for refractive index-based biosensing applications is proposed. It has a unitcell volume of $0.134\lambda _{\mathrm {L}} \times 0.093\lambda _{\mathrm {L}} \times 0.061\lambda _{\mathrm {L}}$ ( $\lambda _{\mathrm {L}} =148.5$ $\mu $ m) while exhibiting reflective polarization conversion ratio (PCR ${}_{\mathrm {rx}}) \ge 80$ % across 2.02–6.59 THz and transmissive polarization conversion ratio (PCR ${}_{\mathrm {tx}}) \ge 80$ % across the spectrum of 3.67–3.91 THz and 6.43–7.29 THz. Physical phenomenon behind the polarization conversions is studied through electric field distribution. It has stable PCR ${}_{\mathrm {rx}} \ge 80$ % performance for incidence angles up to 30°. Its maximal sensitivity (S ${}_{\max }$ ) as a refractive index sensor is 618 GHz/RIU using PCRrx and 792 GHz/RIU using PCRtx. Its biosensor configuration has a Smax of 4.95 THz/RIU (PCR ${}_{\mathrm {tx}}$ ) and 16.76 THz/RIU (PCR ${}_{\mathrm {rx}}$ ). The proposed polarization converter’s wideband performance, dual-mode sensing capability, high sensitivity, and compact dimensions indicate that it is suitable for a variety of applications, such as wireless communication, biosensing, imaging, and security screening.
- 7 March 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 87
Multiple “L” shaped resonators based ultra-wideband thermal emitter for solar energy harvesting applications
- 7 March 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 87
Multiple “L” shaped resonators based ultra-wideband thermal emitter for solar energy harvesting applications
- 29 July 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 279
Nickel based circular slot loaded sectors shaped ultrawideband solar absorber as a thermal emitter
- 29 July 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 279
Nickel based circular slot loaded sectors shaped ultrawideband solar absorber as a thermal emitter
- 5 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (7) , 1703-1710
Steering-Shaped Multiband THz Absorber-Based Highly Sensitive Biofuel Sensor
A steering-shaped polarization-insensitive multiband Terahertz (THz) absorber as a highly sensitive biofuel sensor is proposed in this article. Its unit cell volume is $29\times 29\times 2.6~\mu \text {m}^{3}$ with 11 absorption peaks at 2.254, 4.515, 8.98, 12.248, 12.514, 14.034, 15.231, 15.801, 17.188, 18.062, and 19.164THz with a peak absorptivity of 98.97%, 99.85%, 99.833%, 93.56%, 97.08%, 96.87%, 99.30%, 99.99%, 92.97%, 92.96% and 97.79%, respectively. This absorber-based sensor is capable of analyzing the concentration of ethanol or water in methanol and methanol in water. As a biofuel adulteration sensor, it achieves maximum ~42.22 THz/RIU sensitivity and have a maximum quality factor of 109.605 and a maximum figure of merit (FOM) of 107.712 RIU−1. The high values of sensitivity, Q, and FoM make this absorber used as a biofuel adulteration sensor.
- 5 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (7) , 1703-1710
Steering-Shaped Multiband THz Absorber-Based Highly Sensitive Biofuel Sensor
A steering-shaped polarization-insensitive multiband Terahertz (THz) absorber as a highly sensitive biofuel sensor is proposed in this article. Its unit cell volume is $29\times 29\times 2.6~\mu \text {m}^{3}$ with 11 absorption peaks at 2.254, 4.515, 8.98, 12.248, 12.514, 14.034, 15.231, 15.801, 17.188, 18.062, and 19.164THz with a peak absorptivity of 98.97%, 99.85%, 99.833%, 93.56%, 97.08%, 96.87%, 99.30%, 99.99%, 92.97%, 92.96% and 97.79%, respectively. This absorber-based sensor is capable of analyzing the concentration of ethanol or water in methanol and methanol in water. As a biofuel adulteration sensor, it achieves maximum ~42.22 THz/RIU sensitivity and have a maximum quality factor of 109.605 and a maximum figure of merit (FOM) of 107.712 RIU−1. The high values of sensitivity, Q, and FoM make this absorber used as a biofuel adulteration sensor.
- 10 May 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 191
Nickel-polyimide-nickel based ultra-wideband octagonal solar absorber as a thermal emitter
- 10 May 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 191
Nickel-polyimide-nickel based ultra-wideband octagonal solar absorber as a thermal emitter
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (6) , 1406-1413
Solar Energy Harvesting Using Nickel-Based Superwideband Absorber With Nearly Perfect Blackbody Emission
This article proposes the design of a superwideband absorber covering the infrared, visible light, and ultraviolet (UV) spectrum for solar energy harvesting application. It consists of nickel-based two concentric square rings. The absorber is made of a nickel ground plane, an intermediate substrate layer composed of polyimide dielectric material, and a nickel-based top resonating structure. The overall size of the absorber is $30\times 30\times 12~\text {nm}^{3}$ . It has an operating wavelength of 125.249–2007.657 nm (149.43–2395.23 THz) for absorption (A) $\geq 90$ % with an average absorption of 96.1%. The absorption remains at more than 95% in the wavelength range of 161.12–1582.58 nm (189.56–1873.6 THz). The absorber is insensitive to any change in polarization and also independent of the angle of the incident radiation, while having an average absorption of more than 90% till $\theta = 50^{\circ }$ and an average absorption of 85% is observed till $\theta = 60^{\circ }$ . The proposed absorber achieves 96.6% solar absorption efficiency and also achieves 95.14%, 96.17%, 96.51%, and 96.53% thermal emission efficiency at temperature 2000, 2500, 3000, and 3500 K, respectively. Thermal emissions are in good agreement with an ideal blackbody at all temperatures. Maximum $\eta _{\text {sol-thermal}}$ of 96.46% and maximum $\eta _{\text {sol-electrical}}$ of 67.2% are achieved for $C =1000$ at $T =500$ and 1000 K, respectively.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (6) , 1406-1413
Solar Energy Harvesting Using Nickel-Based Superwideband Absorber With Nearly Perfect Blackbody Emission
This article proposes the design of a superwideband absorber covering the infrared, visible light, and ultraviolet (UV) spectrum for solar energy harvesting application. It consists of nickel-based two concentric square rings. The absorber is made of a nickel ground plane, an intermediate substrate layer composed of polyimide dielectric material, and a nickel-based top resonating structure. The overall size of the absorber is $30\times 30\times 12~\text {nm}^{3}$ . It has an operating wavelength of 125.249–2007.657 nm (149.43–2395.23 THz) for absorption (A) $\geq 90$ % with an average absorption of 96.1%. The absorption remains at more than 95% in the wavelength range of 161.12–1582.58 nm (189.56–1873.6 THz). The absorber is insensitive to any change in polarization and also independent of the angle of the incident radiation, while having an average absorption of more than 90% till $\theta = 50^{\circ }$ and an average absorption of 85% is observed till $\theta = 60^{\circ }$ . The proposed absorber achieves 96.6% solar absorption efficiency and also achieves 95.14%, 96.17%, 96.51%, and 96.53% thermal emission efficiency at temperature 2000, 2500, 3000, and 3500 K, respectively. Thermal emissions are in good agreement with an ideal blackbody at all temperatures. Maximum $\eta _{\text {sol-thermal}}$ of 96.46% and maximum $\eta _{\text {sol-electrical}}$ of 67.2% are achieved for $C =1000$ at $T =500$ and 1000 K, respectively.
- 29 March 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 189
Wide angle stable wideband absorber based solar energy harvester
- 29 March 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 189
Wide angle stable wideband absorber based solar energy harvester
- 1 January 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 185
Ultrathin reflecting wideband terahertz cross polarization converter as a biosensor
- 1 January 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 185
Ultrathin reflecting wideband terahertz cross polarization converter as a biosensor