YFYuhao Feng

Yuhao Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuhao Feng has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A 3-D-Printing Wideband Circumferentially Foldable Dual-Polarized Spherical Luneburg Lens Antenna

    by Feng Yang, Chaoxian Zhao, Yuhao Feng, Kejin Chen, Ming Huang, Yikai Chen, Shiwen Yang

    This communication proposes a novel 3D-printing wideband dual-polarized circumferentially foldable Luneburg lens antenna. The proposed Luneburg lens is stratified into three layers. Specifically, to balance foldability and radiation performance, the innermost layer consists of a dielectric sphere with a radially drilled air-filled conical hole, while the other two layers are composed of arc-shaped dielectric sheets that curved in sinusoidal regulation. The design of the foldable Luneburg lens is guided by effective medium theories. A wide-band ridged horn antenna is used to feed the lens. The foldable Luneburg lens antenna is fabricated by the 3D-printing technology. The measured results show that, in the unfolded state, the peak gain varies from 14.7dB to 19.8dB across the frequency band of 6GHz to 11.4GHz, and the aperture efficiency varies between 34.3% and 94.1%. The proposed foldable lens antenna can scan up to ±90° in all planes with the maximum scanning gain loss less than 1.7dB across the operating band. More importantly, the thickness of this lens in the folded state is only 34% of that in the unfolded state.


  • Wideband Low-Scattering Dual-Polarized Phased Array With Stepped Ground

    by Yu Luo, Shi-Gang Fang, Peng-Fa Li, Yuhao Feng, Shi-Wei Qu, Shiwen Yang

    This communication proposes a wideband dual-polarized phased array with ultra-wideband scattering cross section (SCS) reduction. The antenna elements are loaded on a bilateral stepped ground. This ground is carefully designed in terms of height difference, step number, and length to achieve phase cancellation near the normal direction. Wideband dipoles with vertical electric coupling are designed. The radiation frequency band covers the X-band (40%) under VSWR < 2.8. Array patterns are synthesized with the two subarrays, covering the -45° ~ +45° scanning range. The monostatic SCSs of the proposed 17 × 8 array prototype have been reduced within 3.6 ~ 30 GHz, with an averaged reduction of over 19.4/18.9 dB and an averaged in-band reduction of over 15.4/16.6 dB, under the normal x/y polarized incident waves respectively.

  • A Dual-Layer Coupled Network Perspective on Shared-Aperture Transparent Antenna Arrays for Integrated Space-Air-Ground Networks

    by Yuhao Feng, Yanxin Wu, Lingjun Jia

    This paper presents a network-theoretic modeling and design framework for dual-band shared-aperture tightly coupled dipole arrays (TCDAs) deployed in space-aerial-terrestrial integrated networks (SATIN). The proposed system integrates a low-frequency array (0.6-2.4 GHz) and a high-frequency array (3.5-12 GHz) in a spatially co-located configuration, forming a dual-layer electromagnetic structure. A graph-based abstraction is introduced to characterize the coupled behavior across layers, with each sub-array treated as a frequency-specific network layer and interlayer coupling modeled as weighted edges. To mitigate cross-band interference and enhance vertical transparency, frequency-selective meander-line filters are embedded in the low-frequency dipole arms, enabling effective electromagnetic decoupling without compromising bandwidth or radiation efficiency. Machine learning-assisted surrogate modeling is employed to accelerate prediction of impedance matrices and active element patterns, facilitating optimization of array excitation and system-level metrics such as channel capacity and gain. A $12 \times 12$ high-frequency and $8 \times 8$ low-frequency prototype array is fabricated and tested, demonstrating stable $\pm 30^{\circ }$ beam scanning, average radiation efficiencies of 92% and 88% in their respective bands, and strong alignment with simulation results. The proposed approach offers a scalable and physically grounded solution for multi-band array design in next-generation SATIN platforms.


  • High-Efficiency Octave Bandwidth Rectifier for Electromagnetic Energy Harvesting

    by Haoming He, Yilin Zhou, Zhongqi He, Yuhao Feng, Changjun Liu

    This letter presents the design and implementation of a compact high-efficiency octave microwave rectifier. A key highlight is the novel segmented impedance matching method, a unique approach that expands the rectifier bandwidth. The diode reactance is initially regulated by a series short-ended microstrip line. Impedance-compensated structures, characterized by varying admittance properties across an extensive frequency range, partition the operating frequency band into two segments based on the input impedance, thereby minimizing impedance variation. Ultimately, the input impedance is matched by a novel triple-band matching network. An octave rectifier was fabricated and measured. Results demonstrate that the rectifier achieves over 50% efficiency over 1.3–2.55 GHz (fractional bandwidth 64.9%) at 0-dBm RF input power. Even with a decrease in input power to -10 dBm, the rectifier maintains over 30% efficiency.


  • Design of a High-Power and High-Efficiency GaN-HEMT VCO Based on an Inverse Class-F Amplifier

    by Junlin Mi, Ruinan Fan, Liping Yan, Yuhao Feng, Changjun Liu

    This letter proposes a high-power and high-efficiency GaN-HEMT voltage-controlled oscillator (VCO). The VCO consists of a coupled-line coupler, an inverse class-F amplifier, and a novel frequency-tunable stepped-impedance resonator (SIR). Using a harmonic control circuit and a parasitic parameter compensation circuit, the power amplifier (PA) operates in the inverse class-F state to achieve high efficiency. The feedback circuit uses a coupled-line coupler instead of the traditional coupling capacitor to control feedback power precisely. The measurement results show that the VCO with an oscillation frequency of 2.41–2.45 GHz achieves a maximum conversion efficiency of 74.5% at 2.44 GHz and an output power of 40.2 dBm. It is a candidate for the microwave source in a wireless power transmission system.


  • Fast Pattern Synthesis for Large-Scale Time-Modulated Planar Arrays With a Novel Two-Stage Iterative Convex Optimization Method

    by Zhongkai Zhu, Yikai Chen, Yuhao Feng, Shiwen Yang

    Owing to the new design degree of freedom in the time dimension, the design variables for a time-modulated array synthesis problem usually include antenna element positions in a three-dimensional space, the ON-OFF time instant and duration time in each period, and probably will also include the amplitude and phase excitations. To improve the radiation pattern synthesis efficiency for large-scale time-modulated planar arrays (TMPAs), a novel two-stage iterative convex optimization method is developed. The proposed method decomposes the complicated large-scale TMPAs optimization problem into two convex subarray optimization problems with much smaller scales. The switch-on time instant for each subarray is optimized in the first stage, while the radiation pattern of the entire array is further optimized in the second stage. Consequently, the time consumption for pattern synthesis is significantly reduced owing to a small number of optimization variables, which makes the proposed method especially attractive for real-time beamforming in large-scale arrays. Numerical example for a 10000-element TMPA synthesis solution shows that high-precision scanning beams with low sidelobe levels (SLL = –20.0 dB) and low sideband levels (SBL < –30.0 dB) can be efficiently synthesized. The time consumption also demonstrates the effectiveness of the proposed method.


  • A 50:1 Bandwidth Tightly Coupled Dipole Array With Short-Circuit Resonance Suppressing Surface

    by Yuhao Feng, Yikai Chen, Manyun Zhu

    The Tightly Coupled Dipole Array (TCDA) provides broadband performance. This is achieved due to the interaction between coupled dipoles. However, the traditional tightly coupled antenna has the problem of short circuit resonance, which leads to the limitation of its broadband performance. To address this issue, this paper proposes the incorporation of a resistive frequency-selective layer and a novel frequency-selective surface to reduce the influence of short-circuit resonance on the broadband performance of tightly coupled antennas. Additionally, the array antenna exhibits a thin profile with a size of 1/20λL. The proposed single-polarization tightly coupled antenna achieves a continuous impedance bandwidth of 51:1 (0.33-17 GHz) with VSWR < 3 across the entire frequency range, and VSWR < 5 when scanning down to 45∘ in the E/H plane. Moreover, the proposed dual-polarization ultrawideband tightly coupled antenna achieves a continuous impedance bandwidth of 50:1 (0.33-16.5 GHz) with VSWR < 3 across the entire frequency range, and VSWR < 4 when scanning to 60∘.


  • Efficient Synthesis of Large-Scale Time-Modulated Antenna Arrays Using Artificial Neural Networks and Inverse FFT

    by Chuan Zhao, Yikai Chen, Yuhao Feng, Shiwen Yang

    The efficiency of beampattern synthesis for large-scale time-modulated arrays (TMAs) heavily relies on the performance of various optimization algorithms. In this paper, an artificial neural network (ANN) is combined with the inverse fast Fourier transform (IFFT) to realize efficient beampattern synthesis for large-scale TMAs. Two ANNs are developed respectively to optimize the time duration and on-off time instance in each time modulation period. Specifically, the back-propagation in the ANN consists of an IFFT module and a loss function calculation module. The loss function enables to evaluate the performance of a neural network, and the ANN is optimized by minimizing the value of the loss function. The IFFT module is developed for the fast analysis of the radiation pattern of the antenna array. The desired radiation patterns could be achieved by minimizing the loss function for the radiation patterns. With this approach, radiation intensity in the main beam region could be enhanced, and the discrete form of the on-off time instances and duration time in each period could be obtained as the output of the synthesis approach. A 45×45 TMA is considered as a numerical example to show the efficiency, flexibility, and robustness of the proposed approach.


  • A Novel Class-F 2.45/5.8 GHz Dual-Band Rectifier for Wireless Power Transmission

    by Siyi Xiao, Changjun Liu, Haoming He, Yuhao Feng, Wenquan Che

    This letter proposes a high-efficiency dual-band class-F rectifier for wireless power transmission (WPT). The rectifier comprises a dual-band harmonic termination network, a dual-band matching network, a single Schottky diode, and a dc pass filter. A theoretical analysis of the harmonic termination network is performed to improve the rectifying efficiency. The network exhibits good class-F operation by controlling the second and third harmonics in dual bands. A rectifier operating at 2.45 and 5.8 GHz was designed, fabricated, and measured for validation. The measurements show maximum RF-dc conversion efficiencies of 74.9% and 61.9% with 200 and 500 $~\Omega$ loads at 2.45 and 5.8 GHz, respectively. The proposed rectifier achieves dual-band harmonic control with high efficiency.


  • A Compact Base Station MIMO Antenna Array With Miniaturized Antenna Elements

    by Yuhao Feng, Yikai Chen, Liang Cao

    Multiple-input and multiple-output (MIMO) antenna arrays have become a key component for 5G wireless network. In this work, a compact base station MIMO antenna array is constructed with a novel miniaturized antenna element. The novelty of the miniaturized antenna design lies in the meander-line radiation arm designs for size miniaturization, and a ring director placed over the aperture for achieving wide impedance bandwidth and stable radiation patterns. The size of the miniaturized antenna element is only 40 mm×40 mm (0.22λL×0.22λL), where λL is the wavelength at the lowest frequency of the 1.7-2.7 GHz operating frequency band. The miniaturized antenna enables densely antenna placement with an 80 mm×80 mm square lattice, while simultaneously offering high port isolation, mutual coupling suppression, and non-distorted antenna radiation patterns in such a crowding array environment. Experimental validation of an array prototype confirms the high port isolation (28 dB), stable realized gain (8±0.3 dB), stable 3 dB beamwidth (70∘±1∘±), and stable 10 dB beamwidth 127∘±2∘± over a 45.5% bandwidth (1.7-2.7 GHz).