Mayank Singh
Research Subjects
Mayank Singh has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Srihari Dodla
Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh, India
2 shared publications - Anoj Meena
Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
1 shared publication - Pushkar Jha
School of Mechanical Engineering Bhubaneswar Odisha 751024 Kalinga Institute of Industrial Technology (KIIT) Deemed to be University
1 shared publication R.K. Gautam
1 shared publication- Rakesh Kumar Gautam
Department of Mechanical Engineering Indian Institute of Technology (BHU) Varanasi India
1 shared publication - Ramkumar Yadav
Oral Microbiology and Biomaterials Laboratory, Department of Biomedical, Surgical, and Dental Sciences University of Milan Milan Italy
1 shared publication
Latest Publications
- 7 August 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (8)
Enhancement of Mechanical and Thermo‐Physical Properties in CNTs/GO‐Coated Carbon Fiber‐Reinforced Epoxy Composites
This study predominantly focuses on the application of carbon nanotubes (CNTs), graphene oxide (GO), and hybrid (CNTs/GO) onto carbon fibers through a spray coating process and examines the resulting impact of the coating on mechanical, tribological, and thermo‐physical properties of polymer composite. The synergetic effect of two‐dimensional GO and one‐dimensional CNTs forms a three‐dimensional network structure, resulting in significant enhancements in the mechanical and interfacial properties of fiber‐reinforced polymer composites. The CNTs/GO hybrid coated carbon fiber reinforced epoxy (HCFRE) composite demonstrates superior performance in interlaminar shear strength (ILSS), flexural strength, tensile strength, and hardness, with an enhancement of 38.73%, 30.40%, 33.53%, and 32.64%, respectively, compared to carbon fiber reinforced epoxy (CFRE) composite. The fracture toughness, tensile, and flexural modulus of the HCFRE composite have improvements of 36.36%, 31.66%, and 57.68%, respectively, as compared to the CFRE composite. The HCFRE obtained the maximum thermal conductivity with a 44.44% increment compared to the CFRE composite. The tribological tests comprise four distinct sliding frequencies (6, 8, 10, and 12 Hz) and normal loads (30, 40, 50, and 60 N) with a consistent stroke length of 1.5 mm. Worn‐out surfaces are studied by scanning electron microscope (SEM) images. For the HCFRE, the specific wear rate was decreased by 42.84% compared to the CFRE composite. As the normal load increases, the friction coefficient also increases, whereas it decreases with sliding frequencies.
- 7 August 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (8)
Enhancement of Mechanical and Thermo‐Physical Properties in CNTs/GO‐Coated Carbon Fiber‐Reinforced Epoxy Composites
This study predominantly focuses on the application of carbon nanotubes (CNTs), graphene oxide (GO), and hybrid (CNTs/GO) onto carbon fibers through a spray coating process and examines the resulting impact of the coating on mechanical, tribological, and thermo‐physical properties of polymer composite. The synergetic effect of two‐dimensional GO and one‐dimensional CNTs forms a three‐dimensional network structure, resulting in significant enhancements in the mechanical and interfacial properties of fiber‐reinforced polymer composites. The CNTs/GO hybrid coated carbon fiber reinforced epoxy (HCFRE) composite demonstrates superior performance in interlaminar shear strength (ILSS), flexural strength, tensile strength, and hardness, with an enhancement of 38.73%, 30.40%, 33.53%, and 32.64%, respectively, compared to carbon fiber reinforced epoxy (CFRE) composite. The fracture toughness, tensile, and flexural modulus of the HCFRE composite have improvements of 36.36%, 31.66%, and 57.68%, respectively, as compared to the CFRE composite. The HCFRE obtained the maximum thermal conductivity with a 44.44% increment compared to the CFRE composite. The tribological tests comprise four distinct sliding frequencies (6, 8, 10, and 12 Hz) and normal loads (30, 40, 50, and 60 N) with a consistent stroke length of 1.5 mm. Worn‐out surfaces are studied by scanning electron microscope (SEM) images. For the HCFRE, the specific wear rate was decreased by 42.84% compared to the CFRE composite. As the normal load increases, the friction coefficient also increases, whereas it decreases with sliding frequencies.
- 29 January 2024
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 179
Mechanical and tribological properties of CNTs coated aramid fiber-reinforced epoxy composites
- 29 January 2024
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 179
Mechanical and tribological properties of CNTs coated aramid fiber-reinforced epoxy composites
- Top Cited Papers
- 8 September 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 147, 106103
Selection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: An application of MCDM technique
- 8 September 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 147, 106103
Top Cited PapersSelection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: An application of MCDM technique