Shunzhao Cheng
Shunzhao Cheng has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Haojie Ren
State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
4 shared publications Jun Wang
3 shared publications- Shengyu Shi3 shared publications
Hao Ren
2 shared publications- Hao Ren
Department of Mathematics and Theories, Peng Cheng Laboratory, Shenzhen, China
2 shared publications Hong Yi
2 shared publications
Latest Publications
- 17 October 2026
- Published by Elsevier in Ocean Engineering
- Vol. 369
Experimental investigation on straight-fin helical strakes with varying geometric parameters for vortex-induced vibration suppression
- 17 October 2026
- Published by Elsevier in Ocean Engineering
- Vol. 369
Experimental investigation on straight-fin helical strakes with varying geometric parameters for vortex-induced vibration suppression
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Experimental study on vortex-induced vibration suppression of straight-fin helical strakes and traditional continuous helical strakes
Vortex-induced vibration (VIV) critically accelerates cumulative fatigue failure in marine risers. Traditional helical strakes effectively suppress VIV but induce substantial drag penalties and pose manufacturing challenges due to their complex three-dimensional structure. To address these limitations, a new type of straight-fin helical strake was proposed in this study to balance VIV suppression, drag penalty, and ease of manufacturing. Experimental investigations compared the VIV response of a cylinder with both strake types and without strakes. Hydrodynamic coefficients were calculated using the least squares method based on the energy competition model, and a linear drag prediction model was proposed to quantitatively correlate the drag coefficient with vibration amplitude. The experimental results showed that both strake types provide effective VIV suppression, reducing the excitation coefficient CEY to near-zero under most conditions and narrowing the variation of the added mass coefficient Cmey. Notably, the proposed straight-fin helical strake with a pitch of 17.5D (D is the cylinder diameter) matches the VIV suppression performance of conventional designs. Crucially, it exhibits a better hydrodynamic efficiency, characterized by a lower drag coefficient CD and baseline drag coefficient CD0 within the proposed drag model. The suppression performance of the straight-fin configuration exhibits a sensitivity to the pitch, with the frequency lock-in phenomenon eliminated exclusively at higher pitch. This study validates the 17.5D-pitch straight-fin helical strake as a promising alternative for deep-sea riser applications, offering comparable VIV suppression efficiency alongside a reduced drag penalty.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Experimental study on vortex-induced vibration suppression of straight-fin helical strakes and traditional continuous helical strakes
Vortex-induced vibration (VIV) critically accelerates cumulative fatigue failure in marine risers. Traditional helical strakes effectively suppress VIV but induce substantial drag penalties and pose manufacturing challenges due to their complex three-dimensional structure. To address these limitations, a new type of straight-fin helical strake was proposed in this study to balance VIV suppression, drag penalty, and ease of manufacturing. Experimental investigations compared the VIV response of a cylinder with both strake types and without strakes. Hydrodynamic coefficients were calculated using the least squares method based on the energy competition model, and a linear drag prediction model was proposed to quantitatively correlate the drag coefficient with vibration amplitude. The experimental results showed that both strake types provide effective VIV suppression, reducing the excitation coefficient CEY to near-zero under most conditions and narrowing the variation of the added mass coefficient Cmey. Notably, the proposed straight-fin helical strake with a pitch of 17.5D (D is the cylinder diameter) matches the VIV suppression performance of conventional designs. Crucially, it exhibits a better hydrodynamic efficiency, characterized by a lower drag coefficient CD and baseline drag coefficient CD0 within the proposed drag model. The suppression performance of the straight-fin configuration exhibits a sensitivity to the pitch, with the frequency lock-in phenomenon eliminated exclusively at higher pitch. This study validates the 17.5D-pitch straight-fin helical strake as a promising alternative for deep-sea riser applications, offering comparable VIV suppression efficiency alongside a reduced drag penalty.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Vortex-induced vibration features of a flexible pipe with a low mass ratio at subcritical Reynolds numbers
A new type of riser, such as the thermoplastic composite pipe, features a low mass ratio and is becoming increasingly common in marine engineering projects. However, vortex-induced vibration (VIV) poses a significant concern regarding fatigue damage in risers, and VIV understandings of risers with low mass ratios are still limited and require further investigation. The present study conducted experimental research on a flexible pipe with a critical mass ratio of 0.50 at subcritical Reynolds numbers (Re) through towing in still water. The displacement responses were reconstructed using modal superposition methods. The amplitude, frequency, and phase difference between in-line (IL) flow and cross-flow (CF) directions, motion trajectory, and fatigue damage are analyzed. The results indicate that the unexpectedly larger VIV amplitude with over 1.0 D appears in the IL direction, which is compared to that found in the CF direction. Such higher response amplitude in the IL direction leads to increased fatigue damage. Additionally, the VIVs in both IL and CF directions exhibit no apparent frequency lock-in phenomenon. The frequencies of the VIVs between the IL and CF directions maintain a twice relationship, and the motion trajectory follows a typical “8”-shaped pattern. The present work provides a basic understanding of VIVs in risers with critical mass ratios and offers helpful guidelines for the design of marine risers in engineering applications.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Vortex-induced vibration features of a flexible pipe with a low mass ratio at subcritical Reynolds numbers
A new type of riser, such as the thermoplastic composite pipe, features a low mass ratio and is becoming increasingly common in marine engineering projects. However, vortex-induced vibration (VIV) poses a significant concern regarding fatigue damage in risers, and VIV understandings of risers with low mass ratios are still limited and require further investigation. The present study conducted experimental research on a flexible pipe with a critical mass ratio of 0.50 at subcritical Reynolds numbers (Re) through towing in still water. The displacement responses were reconstructed using modal superposition methods. The amplitude, frequency, and phase difference between in-line (IL) flow and cross-flow (CF) directions, motion trajectory, and fatigue damage are analyzed. The results indicate that the unexpectedly larger VIV amplitude with over 1.0 D appears in the IL direction, which is compared to that found in the CF direction. Such higher response amplitude in the IL direction leads to increased fatigue damage. Additionally, the VIVs in both IL and CF directions exhibit no apparent frequency lock-in phenomenon. The frequencies of the VIVs between the IL and CF directions maintain a twice relationship, and the motion trajectory follows a typical “8”-shaped pattern. The present work provides a basic understanding of VIVs in risers with critical mass ratios and offers helpful guidelines for the design of marine risers in engineering applications.
- 16 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Real-sea validation of a model predictive controller's inherent robustness for medium-scale unmanned trimaran heading
- 16 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Real-sea validation of a model predictive controller's inherent robustness for medium-scale unmanned trimaran heading
- 30 September 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Cable length prediction for towing models of reverse towing systems based on the cable deployment process
- 30 September 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Cable length prediction for towing models of reverse towing systems based on the cable deployment process
- Open Access
- 9 September 2023
- Published by Elsevier in Journal of Ocean Engineering and Science
- Vol. 10 (4) , 367-385
Application of polynomial chaos expansion in sensitivity analysis of towed cable parameters of the underwater towing system
- 9 September 2023
- Published by Elsevier in Journal of Ocean Engineering and Science
- Vol. 10 (4) , 367-385
Open AccessApplication of polynomial chaos expansion in sensitivity analysis of towed cable parameters of the underwater towing system