Makhaokane Paulina Chabalala
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Makhaokane Paulina Chabalala has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Nobanathi Wendy Maxakato
Department of Chemical Sciences University of Johannesburg Doornfontein 2028 South Africa
6 shared publications - Thabo Matthews
Catalysis Institute Department of Chemical Engineering University of Cape Town Rondebosch 7701 South Africa
5 shared publications - Siyabonga Patrick Mbokazi
Department of Chemical Sciences
3 shared publications - Bryan Patrick Doyle
Department of Physics University of Johannesburg P.O. Box 524 Auckland Park 2006 South Africa
2 shared publications - Kudzai Mugadza
Department of Chemical Sciences University of Johannesburg Doornfontein 2028 South Africa
2 shared publications - Memory Zikhali
Department of Chemical Sciences, University of Johannesburg, Doornfontein, Johannesburg 2028, South Africa
2 shared publications
Latest Publications
- Open Access
- 25 September 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (21)
A Novel Co 3 Se 4 ‐CNFs Hybrid System as a Versatile Enhancer for Pd NPs Toward Ethylene Glycol Electrooxidation
The commercialization of fuel cells requires electrocatalysts with improved electrocatalytic activity, stability, durability, and reduced cost. Pd nanoparticles supported on cobalt selenide‐carbon nanofibers (Pd/Co 3 Se 4 ‐CNFs) are synthesized using a modified polyol‐microwave sodium borohydride reduction method for the electrocatalytic oxidation of ethylene glycol. The electrochemical evaluation employs cyclic voltammetry (CV), linear sweep voltammetry (LSV), and chronoamperometry (CA) for stability, while electrochemical impedance spectroscopy (EIS) assesses the electrocatalyst conductivity. Pd NPs on Co 3 Se 4 ‐CNFs are analyzed through X‐ray photoelectron spectroscopy (XPS) and X‐ray diffraction (XRD), with morphology studied using transmission electron microscopy (TEM). The Pd/Co 3 Se 4 ‐CNFs exhibited excellent electrocatalytic properties in an alkaline medium due to strong metal‐support interactions (SMSI), synergy, electronic interactions, and good dispersion. The electrochemically active surface area (ECSA) of Pd/Co 3 Se 4 ‐CNFs is 98.1 m 2 g −1 , mass activity of 2716.7 mA mg Pd −1 , which is 14.2 times more than Pd/C commercial electrocatalyst, which produced 191.2 mA mg Pd −1 . Also, Pd/Co 3 Se 4 ‐CNFs has high stability for 2.78 h and excellent durability after 500 cycles, retaining 65.7% current density. These findings reveal the Co 3 Se 4 ‐CNFs hybrid as a novel support that enhances the electronic interaction with Pd nanoparticles, significantly improves catalyst durability, and imparts strong resistance to poisoning during ethylene glycol electrooxidation, offering a robust platform for advanced alcohol fuel cell catalysis.
- 25 September 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (21)
Open AccessA Novel Co 3 Se 4 ‐CNFs Hybrid System as a Versatile Enhancer for Pd NPs Toward Ethylene Glycol Electrooxidation
The commercialization of fuel cells requires electrocatalysts with improved electrocatalytic activity, stability, durability, and reduced cost. Pd nanoparticles supported on cobalt selenide‐carbon nanofibers (Pd/Co 3 Se 4 ‐CNFs) are synthesized using a modified polyol‐microwave sodium borohydride reduction method for the electrocatalytic oxidation of ethylene glycol. The electrochemical evaluation employs cyclic voltammetry (CV), linear sweep voltammetry (LSV), and chronoamperometry (CA) for stability, while electrochemical impedance spectroscopy (EIS) assesses the electrocatalyst conductivity. Pd NPs on Co 3 Se 4 ‐CNFs are analyzed through X‐ray photoelectron spectroscopy (XPS) and X‐ray diffraction (XRD), with morphology studied using transmission electron microscopy (TEM). The Pd/Co 3 Se 4 ‐CNFs exhibited excellent electrocatalytic properties in an alkaline medium due to strong metal‐support interactions (SMSI), synergy, electronic interactions, and good dispersion. The electrochemically active surface area (ECSA) of Pd/Co 3 Se 4 ‐CNFs is 98.1 m 2 g −1 , mass activity of 2716.7 mA mg Pd −1 , which is 14.2 times more than Pd/C commercial electrocatalyst, which produced 191.2 mA mg Pd −1 . Also, Pd/Co 3 Se 4 ‐CNFs has high stability for 2.78 h and excellent durability after 500 cycles, retaining 65.7% current density. These findings reveal the Co 3 Se 4 ‐CNFs hybrid as a novel support that enhances the electronic interaction with Pd nanoparticles, significantly improves catalyst durability, and imparts strong resistance to poisoning during ethylene glycol electrooxidation, offering a robust platform for advanced alcohol fuel cell catalysis.
- Open Access
- 13 February 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (6) , 1552-1564
Improving the electrocatalytic activity of Pd nanoparticles through electronic coupling interaction with a Ni2P–MoS2 hybrid support for ethanol electro-oxidation in an alkaline medium
Pd/Ni2P–MoS2 hybrid shows improved electrocatalytic activity for ethanol electrooxidation. The interaction between Pd and the support enhances reaction kinetics and stability in alkaline environments, leading to better overall performance.
- 13 February 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (6) , 1552-1564
Open AccessImproving the electrocatalytic activity of Pd nanoparticles through electronic coupling interaction with a Ni2P–MoS2 hybrid support for ethanol electro-oxidation in an alkaline medium
Pd/Ni2P–MoS2 hybrid shows improved electrocatalytic activity for ethanol electrooxidation. The interaction between Pd and the support enhances reaction kinetics and stability in alkaline environments, leading to better overall performance.
- Open Access
- 18 January 2024
- Published by Wiley in ChemElectroChem
- Vol. 11 (4)
Pd/fMC−NiO Synergistic, Promotional Effect and Cooperation Induced Electrocatalysis towards Ethylene Glycol Electrooxidation: Experimental Approach and DFT Calculations
Direct alcohol fuel cells (DAFCs) face several challenges such as carbon support corrosion, poor kinetics, and long‐term stability, requiring improved electrocatalyst support development. We synthesized 5 %Pd/fMC−NiO using a microwave‐assisted sodium borohydride‐enhanced polyol method. X‐ray photoelectron spectroscopy, transmission electron microscope, and X‐ray diffractometry probed the material's surface composition, morphology, and structure. ICP‐OES is employed to quantify palladium loading. Fourier Transform Infrared Spectroscopy mapped the functional groups. Cyclic voltammetry, linear sweep voltammetry, electrochemical impedance spectroscopy, and chronoamperometry show that the 5 %Pd/fMC−NiO has the lowest activation energy, and with that, the best electroactivity, which is ~16 times higher compared to commercial Pd/C; additionally, the catalyst shows anti‐poisoning properties, and long‐term durability. This is merited to the cooperation and promotional effect of Pd/fMC−NiO. The electrocatalysts’ electroactivity improved via enhanced electron movement instigated by NiO. This study introduced the parallelism effect concept borrowed from the graphite structure for controlled electron channeling the 5 % Pd/fMC−NiO electrocatalyst. The theoretical calculations corroborated the experimental findings that our approach favors anchoring and dispersing Pd NPs uniformly, demonstrating NiO′s cooperative and promotional effects. Thus, opening new opportunities for the development of electrocatalysts for high‐performance DAFCs.
- 18 January 2024
- Published by Wiley in ChemElectroChem
- Vol. 11 (4)
Open AccessPd/fMC−NiO Synergistic, Promotional Effect and Cooperation Induced Electrocatalysis towards Ethylene Glycol Electrooxidation: Experimental Approach and DFT Calculations
Direct alcohol fuel cells (DAFCs) face several challenges such as carbon support corrosion, poor kinetics, and long‐term stability, requiring improved electrocatalyst support development. We synthesized 5 %Pd/fMC−NiO using a microwave‐assisted sodium borohydride‐enhanced polyol method. X‐ray photoelectron spectroscopy, transmission electron microscope, and X‐ray diffractometry probed the material's surface composition, morphology, and structure. ICP‐OES is employed to quantify palladium loading. Fourier Transform Infrared Spectroscopy mapped the functional groups. Cyclic voltammetry, linear sweep voltammetry, electrochemical impedance spectroscopy, and chronoamperometry show that the 5 %Pd/fMC−NiO has the lowest activation energy, and with that, the best electroactivity, which is ~16 times higher compared to commercial Pd/C; additionally, the catalyst shows anti‐poisoning properties, and long‐term durability. This is merited to the cooperation and promotional effect of Pd/fMC−NiO. The electrocatalysts’ electroactivity improved via enhanced electron movement instigated by NiO. This study introduced the parallelism effect concept borrowed from the graphite structure for controlled electron channeling the 5 % Pd/fMC−NiO electrocatalyst. The theoretical calculations corroborated the experimental findings that our approach favors anchoring and dispersing Pd NPs uniformly, demonstrating NiO′s cooperative and promotional effects. Thus, opening new opportunities for the development of electrocatalysts for high‐performance DAFCs.
- Open Access
- 14 December 2023
- Published by Wiley in Energy Technology
- Vol. 12 (2)
Iron Oxide‐Carbon Black Promotional Effect on Palladium Nanoparticles Toward Ethylene Glycol Oxidation in Alkaline Medium: Experimental and Computational Studies
Direct alcohol fuel cells are the next‐generation energy sources of the future due to their high power density. Palladium electrocatalysts are promising prospects for enhancing alcohol oxidation in alkaline media, but the higher cost and susceptibility to CO poisoning limit their application and commercialization. Thus, there is a need to improve the performance of the Pd electrocatalysts by utilizing a double supporting system. A microwave‐assisted polyol method is used to synthesize the palladium nanoparticles supported on iron oxide‐carbon black material (Pd/Fe2O3‐CB). Physiochemical and electrochemical characterization of the obtained electrocatalysts materials is conducted to study morphology and the electrochemical behaviour of the as‐synthesized electrocatalysts. The Pd/Fe2O3‐CB displayed higher kinetics approved by a higher current density of 58.7 mA cm−2, stability, and durability, owing to Fe2O3, and CB incorporation. Density functional theory (DFT) proves that C from CO has more robust interactions with surface Pd, thereby explaining the stronger C‐O binding property of Pd. The orbital analysis revealed that 3d orbitals of Pd participate in the hybridization with 2p orbitals of C and O. As a result, the overlap between C2p and Pd3d/Fe3d orbitals significantly broadened, leading to solid adsorption of CO over Pd/Fe2O3.
- 14 December 2023
- Published by Wiley in Energy Technology
- Vol. 12 (2)
Open AccessIron Oxide‐Carbon Black Promotional Effect on Palladium Nanoparticles Toward Ethylene Glycol Oxidation in Alkaline Medium: Experimental and Computational Studies
Direct alcohol fuel cells are the next‐generation energy sources of the future due to their high power density. Palladium electrocatalysts are promising prospects for enhancing alcohol oxidation in alkaline media, but the higher cost and susceptibility to CO poisoning limit their application and commercialization. Thus, there is a need to improve the performance of the Pd electrocatalysts by utilizing a double supporting system. A microwave‐assisted polyol method is used to synthesize the palladium nanoparticles supported on iron oxide‐carbon black material (Pd/Fe2O3‐CB). Physiochemical and electrochemical characterization of the obtained electrocatalysts materials is conducted to study morphology and the electrochemical behaviour of the as‐synthesized electrocatalysts. The Pd/Fe2O3‐CB displayed higher kinetics approved by a higher current density of 58.7 mA cm−2, stability, and durability, owing to Fe2O3, and CB incorporation. Density functional theory (DFT) proves that C from CO has more robust interactions with surface Pd, thereby explaining the stronger C‐O binding property of Pd. The orbital analysis revealed that 3d orbitals of Pd participate in the hybridization with 2p orbitals of C and O. As a result, the overlap between C2p and Pd3d/Fe3d orbitals significantly broadened, leading to solid adsorption of CO over Pd/Fe2O3.
- Open Access
- 2 November 2023
- Published by Wiley in ChemCatChem
- Vol. 15 (22)
Unveiling the Collaborative Strategy and Synergistic Effects of Pd/V2O5‐fAC towards Glycerol Electrooxidation
A series of Pd nanoparticles supported on V2O5 immobilized on functionalized carbon, % Pd (1, 3, and 5) and % V2O5 (10, 20, and 30), were prepared by sodium borohydride‐assisted microwave polyol synthesis for glycerol oxidation reaction (GlyOR) in an alkaline medium. Electrocatalysts loading, temperature, V2O5 immobilization, and their synergistic effect on the electrocatalytic performance are systematically studied. The electrocatalysts′ morphology and electronic properties were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, Transmission electron microscopy, and X‐ray photoelectron spectroscopy. A significantly improved GlyOR is observed with increased V2O5 content and Pd percentage. The 5 %Pd/30 %V2O5‐fAC showed the highest mass activity of 2157.3 mA . mgPd−1, a more negative onset potential of 0.62 VRHE, versus the commercial equivalent, and possessed high stability and durability. The increase in electrocatalytic activity is attributed to the effective immobilization of V2O5 on fAC efficient synergism between Pd and V2O5, strong metal support interaction (SMSI), and great exposure of the electroactive sites. The results herein contribute significantly to the understanding of the physicochemical and electrochemical effects of metal oxide immobilization, microwave irradiation, % Pd/% Metal oxide optimization, and SMSI on metal oxide‐carbon hybrid electrocatalysts for GlyOR, opening new avenues for fabricating high‐performance direct alkaline glycerol fuel cells.
- 2 November 2023
- Published by Wiley in ChemCatChem
- Vol. 15 (22)
Open AccessUnveiling the Collaborative Strategy and Synergistic Effects of Pd/V2O5‐fAC towards Glycerol Electrooxidation
A series of Pd nanoparticles supported on V2O5 immobilized on functionalized carbon, % Pd (1, 3, and 5) and % V2O5 (10, 20, and 30), were prepared by sodium borohydride‐assisted microwave polyol synthesis for glycerol oxidation reaction (GlyOR) in an alkaline medium. Electrocatalysts loading, temperature, V2O5 immobilization, and their synergistic effect on the electrocatalytic performance are systematically studied. The electrocatalysts′ morphology and electronic properties were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, Transmission electron microscopy, and X‐ray photoelectron spectroscopy. A significantly improved GlyOR is observed with increased V2O5 content and Pd percentage. The 5 %Pd/30 %V2O5‐fAC showed the highest mass activity of 2157.3 mA . mgPd−1, a more negative onset potential of 0.62 VRHE, versus the commercial equivalent, and possessed high stability and durability. The increase in electrocatalytic activity is attributed to the effective immobilization of V2O5 on fAC efficient synergism between Pd and V2O5, strong metal support interaction (SMSI), and great exposure of the electroactive sites. The results herein contribute significantly to the understanding of the physicochemical and electrochemical effects of metal oxide immobilization, microwave irradiation, % Pd/% Metal oxide optimization, and SMSI on metal oxide‐carbon hybrid electrocatalysts for GlyOR, opening new avenues for fabricating high‐performance direct alkaline glycerol fuel cells.
- Open Access
- 7 September 2023
- Published by Wiley in ChemElectroChem
- Vol. 10 (21)
Recent Progress on Carbon‐Based Electrocatalysts for Oxygen Reduction Reaction: Insights on the Type of Synthesis Protocols, Performances and Outlook Mechanisms
Due to their low cost, accessibility of resources, and improved stability and durability, carbon‐based nanomaterials have attracted significant attention as cathode materials for oxygen reduction reactions. These materials also exhibit intrinsic physical and electrochemical features. However, their potential for use in fuel cells is constrained by low ORR activity and slow kinetics. Carbon nanomaterials can be functionalized and doped with heteroatoms to change their morphologies and generate a large number of oxygen reduction active sites to lessen the problems. Doping the carbon lattice with heteroatoms like N, S, and P and functionalizing the carbon structure with −OCH3, −F, −COO−, −O− are two of these modifications that can change specific properties of the carbon nanomaterials like expanding interlayer distance, producing a large number of active sites, and enhancing oxygen reduction activity. When compared to pristine carbon‐based nanomaterials, these doped and functionalized carbon nanomaterials, including their composites, exhibit accelerated rate performance, outstanding stability, and higher methanol tolerance. This article summarizes the most recent developments in heteroatom‐doped and functionalized carbon‐based nanomaterials, covering different synthesis approaches, characterization methods, electrochemical performance, and oxygen reduction reaction mechanisms. As cathode materials for fuel cell technologies, the significance of heteroatom co‐doping and transition metal heteroatom co‐doping is also underlined.
- 7 September 2023
- Published by Wiley in ChemElectroChem
- Vol. 10 (21)
Open AccessRecent Progress on Carbon‐Based Electrocatalysts for Oxygen Reduction Reaction: Insights on the Type of Synthesis Protocols, Performances and Outlook Mechanisms
Due to their low cost, accessibility of resources, and improved stability and durability, carbon‐based nanomaterials have attracted significant attention as cathode materials for oxygen reduction reactions. These materials also exhibit intrinsic physical and electrochemical features. However, their potential for use in fuel cells is constrained by low ORR activity and slow kinetics. Carbon nanomaterials can be functionalized and doped with heteroatoms to change their morphologies and generate a large number of oxygen reduction active sites to lessen the problems. Doping the carbon lattice with heteroatoms like N, S, and P and functionalizing the carbon structure with −OCH3, −F, −COO−, −O− are two of these modifications that can change specific properties of the carbon nanomaterials like expanding interlayer distance, producing a large number of active sites, and enhancing oxygen reduction activity. When compared to pristine carbon‐based nanomaterials, these doped and functionalized carbon nanomaterials, including their composites, exhibit accelerated rate performance, outstanding stability, and higher methanol tolerance. This article summarizes the most recent developments in heteroatom‐doped and functionalized carbon‐based nanomaterials, covering different synthesis approaches, characterization methods, electrochemical performance, and oxygen reduction reaction mechanisms. As cathode materials for fuel cell technologies, the significance of heteroatom co‐doping and transition metal heteroatom co‐doping is also underlined.