Saheed A. Lateef
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Saheed A. Lateef has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Golareh Jalilvand
University of South Carolina
4 shared publications Avinash Raulo
Department of Chemical Engineering
2 shared publications- William Earl Mustain
Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
2 shared publications Fabio Albano
NantG Power LLC, El Segundo, California 90245, United States of America
1 shared publication- Hunter A. McRay
Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
1 shared publication John Chmiola
NantG Power LLC, El Segundo, California 90245, United States of America
1 shared publication
Latest Publications
- Open Access
- 17 December 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1)
Mechanistic roles and design criteria for catalysts in lithium–sulfur batteries
- 17 December 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1)
Open AccessMechanistic roles and design criteria for catalysts in lithium–sulfur batteries
- 23 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (18) , 26604-26619
An Expansion-Mitigant Binder for Stable Cycling of High-Loading Lithium–Sulfur Batteries
Lithium-sulfur batteries with high sulfur content and mass loading are promising energy storage technologies due to sulfur's exceptional theoretical energy density. However, in practice, their actual capacity drastically decays when the sulfur cathode is loaded to the commercially required levels of 4 mgsulfur cm-2 and above, significantly reducing the energy density. This reduction is due to the excessive formation of polysulfides during sulfur lithiation, which not only deteriorates battery performance through their detrimental shuttling but also results in substantial stress buildup due to their significantly larger volume compared to sulfur. To address these challenges, we have developed an approach to suppress lithium polysulfide shuttling by limiting the space for sulfur expansion while improving the Li+ ion diffusion. This was achieved through a straightforward but effective method to cross-link the organic binder used in sulfur electrodes. Specifically, PVDF, one of the most common binder materials for battery electrodes, was studied. The chemical, mechanical, and structural properties of the cross-linked PVDF binder were thoroughly investigated, compared with standard PVDF, and correlated to the achieved electrochemical performance of sulfur electrodes. As a result, sulfur cathodes with cross-linked PVDF binder exhibited prolonged cycle life compared to their standard counterparts. Moreover, using this expansion-mitigant binder, cathodes with areal sulfur loading of 4 mg cm-2 showed exceptional stability for more than 200 cycles and a Coulombic efficiency above 97%. This approach offers a promising avenue to alleviate the major roadblocks of lithium-sulfur battery commercialization while allowing the utilization of the commonly accessible and well-studied binder chemistries.
- 23 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (18) , 26604-26619
An Expansion-Mitigant Binder for Stable Cycling of High-Loading Lithium–Sulfur Batteries
Lithium-sulfur batteries with high sulfur content and mass loading are promising energy storage technologies due to sulfur's exceptional theoretical energy density. However, in practice, their actual capacity drastically decays when the sulfur cathode is loaded to the commercially required levels of 4 mgsulfur cm-2 and above, significantly reducing the energy density. This reduction is due to the excessive formation of polysulfides during sulfur lithiation, which not only deteriorates battery performance through their detrimental shuttling but also results in substantial stress buildup due to their significantly larger volume compared to sulfur. To address these challenges, we have developed an approach to suppress lithium polysulfide shuttling by limiting the space for sulfur expansion while improving the Li+ ion diffusion. This was achieved through a straightforward but effective method to cross-link the organic binder used in sulfur electrodes. Specifically, PVDF, one of the most common binder materials for battery electrodes, was studied. The chemical, mechanical, and structural properties of the cross-linked PVDF binder were thoroughly investigated, compared with standard PVDF, and correlated to the achieved electrochemical performance of sulfur electrodes. As a result, sulfur cathodes with cross-linked PVDF binder exhibited prolonged cycle life compared to their standard counterparts. Moreover, using this expansion-mitigant binder, cathodes with areal sulfur loading of 4 mg cm-2 showed exceptional stability for more than 200 cycles and a Coulombic efficiency above 97%. This approach offers a promising avenue to alleviate the major roadblocks of lithium-sulfur battery commercialization while allowing the utilization of the commonly accessible and well-studied binder chemistries.
- 3 December 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (12) , 120518
Effect of Carbon Morphology and Slurry Formulation in Sulfur Cathode for Li-S Batteries
The performance of Lithium-Sulfur (Li-S) batteries is significantly influenced by material selection and manufacturing processes, with conductive carbon and slurry formulation playing crucial roles. In this study, the impact of carbon morphology and solvent/solid ratio in slurry preparation on microstructure and electrochemical performance of sulfur cathodes was investigated. Various carbon structures, such as nanotubes, sheets, and particles, were explored, and the solvent volume was adjusted to assess their effects on electrode architecture and electrochemical performance. Our findings demonstrate that the binder dissolution process and consequent electrode architecture and performance are highly influenced by both the carbon structure and slurry solvent volume. Furthermore, it was observed that, contrary to common assumption, advanced carbon structures are not necessary for enhanced capacity and durability of Li-S cathodes. Accordingly, the best cycling durability was achieved by optimizing the slurry with 300 μL/mgPVDF of NMP solvent and using Ketjen black as the conductive carbon, resulting in an initial capacity of 1029 mAh gS −1, with a retention of 830 mAh gS −1 after 500 cycles. These results, obtained at a high areal loading of 4.5 mgS cm−2, demonstrate the commercial potential of the proposed electrode formulation and processing method without reliance on advanced materials or techniques.
- 3 December 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (12) , 120518
Effect of Carbon Morphology and Slurry Formulation in Sulfur Cathode for Li-S Batteries
The performance of Lithium-Sulfur (Li-S) batteries is significantly influenced by material selection and manufacturing processes, with conductive carbon and slurry formulation playing crucial roles. In this study, the impact of carbon morphology and solvent/solid ratio in slurry preparation on microstructure and electrochemical performance of sulfur cathodes was investigated. Various carbon structures, such as nanotubes, sheets, and particles, were explored, and the solvent volume was adjusted to assess their effects on electrode architecture and electrochemical performance. Our findings demonstrate that the binder dissolution process and consequent electrode architecture and performance are highly influenced by both the carbon structure and slurry solvent volume. Furthermore, it was observed that, contrary to common assumption, advanced carbon structures are not necessary for enhanced capacity and durability of Li-S cathodes. Accordingly, the best cycling durability was achieved by optimizing the slurry with 300 μL/mgPVDF of NMP solvent and using Ketjen black as the conductive carbon, resulting in an initial capacity of 1029 mAh gS −1, with a retention of 830 mAh gS −1 after 500 cycles. These results, obtained at a high areal loading of 4.5 mgS cm−2, demonstrate the commercial potential of the proposed electrode formulation and processing method without reliance on advanced materials or techniques.
- 7 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (18) , 9307-9317
Self-Structured Binder Confinement of Sulfur for Highly Durable Lithium-Sulfur Batteries
- 7 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (18) , 9307-9317
Self-Structured Binder Confinement of Sulfur for Highly Durable Lithium-Sulfur Batteries