KMKaran Moolchandani

Karan Moolchandani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Karan Moolchandani has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Morphological and microstructural analysis of sustainable concrete with crumb rubber and SCMs

    by Karan Moolchandani, Abhay Sharma

    The environmental burden of Portland cement production, a major contributor to global CO 2 emissions, calls for innovative material solutions in concrete technology. This study examines the morphological and microstructural characteristics of sustainable concrete incorporating crumb rubber (CR), fly ash (FA), silica fume (SF), and marble slurry powder (MSP). Fifteen hybrid mix designs were prepared and characterized using X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy to investigate phase composition, hydration products, and interface morphology. The optimal mix containing 5% SF, 10% MSP, and 15% FA exhibited significant portlandite reduction (∼22–25%) and enhanced amorphous C–S–H gel formation, indicating strong pozzolanic interaction. MSP contributed to pore refinement and improved interfacial bonding, while CR, despite its non-reactive nature, enhanced the ductility and energy absorption potential of the matrix. Elemental mapping confirmed uniform distribution of Ca and Si, supporting improved hydration product formation and microstructural integrity. These findings demonstrate the synergistic effect of CR and supplementary cementitious materials in improving concrete’s internal structure and contribute to ongoing efforts to reduce the construction industry’s carbon footprint.


  • Open Access

    State-of-the-art review on the influence of crumb rubber on the strength, durability, and morphological properties of concrete

    by Karan Moolchandani, Abhay Sharma

    Using crumb rubber (CR) from end-of-life tyres in concrete offers a practical way to reduce environmental waste while enhancing specific performance characteristics. This review brings together current findings on how CR affects the fresh properties, strength, durability, and microstructure of concrete. It explains how untreated rubber often reduces compressive strength, especially at higher replacement levels, due to poor bonding and internal voids. However, this performance drop can be significantly reduced through surface treatments like alkali washing and the use of supplementary cementitious materials. These combinations help restore strength, improve resistance to chloride attack and freeze–thaw cycles, and lower permeability. Microstructural studies show that refining particle size and improving the rubber–cement interface lead to a denser and more cohesive matrix. A classification system is proposed to guide practical applications based on the amount of rubber used and the required mechanical and durability properties. When properly designed, rubberized concrete can reduce embodied carbon by up to 25% and eliminate the need for natural aggregates in many applications. The review also outlines areas that need further attention, including long-term performance validation, lifecycle modeling, and development of practical mix design standards to support the wider use of rubberized concrete in construction.


  • Open Access

    Enhancing Concrete Performance with Crumb Rubber and Waste Materials: A Study on Mechanical and Durability Properties

    by Karan Moolchandani, Abhay Sharma, Dharavath Kishan

    In addressing the dual challenges of sustainable waste management and environmental conservation in the construction industry, particularly the disposal of waste tire crumb rubber (CR) and the demand for eco-friendly building materials, this study explores a novel solution. It examines the sustainable incorporation of waste tire crumb rubber and mineral additions—namely silica fume (SF), marble slurry powder (MSP), and fly ash (FA)—as partial substitutes for natural fine aggregates and cement in concrete. Through comprehensive testing of seventeen concrete samples, the study reveals that the specific mix of R10S5M10F15 that contained 10% crumb rubber as replacement of fine aggregates, and 5% silica fume, 10% marble slurry powder and 15% fly ash as replacements of cement, not only achieves compressive and split tensile strength comparable to the control mix, while the 90 days flexural strength was improved by 4.48%; credited to SF’s pozzolanic action and the filler effects of MSP and FA, but also that the inclusion of CR, while reducing compressive strength due to material variations, enhances ductility and improves resistance to sulfate and acid attacks, despite increasing water absorption. The primary goal of this research is to investigate the feasibility and effectiveness of using waste materials in concrete to foster more sustainable construction practices. The objectives include a detailed assessment of the mechanical properties and durability of concrete incorporating these waste materials, aiming to determine the optimal mix proportions for their effective utilization. This study’s novelty lies in its detailed analysis of the synergistic effects of combining CR, SF, MSP, and FA in concrete, contributing to the field by offering a sustainable alternative approach to traditional concrete formulations and highlighting the delicate balance required for optimized concrete performance.


  • Open Access

    Evaluating the Elastic Constants of Concrete, Modified with Fly Ash and Marble Waste, and Their Effects on High-Rise Buildings Using ETABS Software

    by Karan Moolchandani, Abhay Sharma

    This study involves partially replacing coarse aggregate with marble waste products, and partially replacing cement with fly ash, in order to obtain the best results. This study aims to determine how the use of these waste products affects the mechanical properties of the resulting concrete, which could have valuable implications for sustainable construction practices. Different samples were prepared by adding marble waste products, marble slurry powder, fly ash, and a combination of these in the concrete. The modulus of elasticity and Poisson’s ratio for the samples were calculated, and it was found that the samples with admixtures had lower moduli of elasticity and higher Poisson’s ratio values than did the conventional concrete mixture. Based on the values of elastic constants E and µ of the general and modified concrete mixtures, two structures are modelled for each concrete mixture and simulated using ETABS Ultimate software to evaluate and compare the practical applicability of the modified concrete mixtures. Both of the envisaged buildings are considered identical, having shear walls placed symmetrically. The response of the structure was analysed by applying earthquake load, wind load, and respective combinations according to IS codes. The storey displacement and storey stiffness under the lateral load and load combination were determined. The results showed that the modified concrete had comparable storey displacement and storey stiffness values to those of conventional concrete. The results indicate that the use of admixtures in concrete has several benefits, including improved workability, as well as adequate strength and durability, including resistance to deformation, as compared to conventional concrete.


  • Open Access

    Experimental Analysis on the Feasibility of Bamboo Reinforcement in Concrete Mix Design and Comparison with Steel Reinforced Concrete

    by R. Sivakumar, R. Ganesan, A. Latha, Karan Moolchandani, Anuj Kumar Sharma, Sri Ram Krishna Mishra, Farhan Khan, Amit Kumar Yadav, Lijalem Ayele

    Besides being chief construction ingredients, concrete and steel produce a high amount of CO2, and high energy consumption promotes global warming. To evade this problem, green and low energy consuming alternative is required. Rapid growing time with the least period to attend optimum strength made bamboo a new immerging mainstream constituent in construction. Bamboo, as one of the probable alternate structural materials, not only promises a sustainable and sturdy option but also reduces the environmental carbon footprint. In this research, article authors replaced steel reinforcement in concrete with bamboo. To establish bamboo as a construction material, a concrete beam of 200mm×500mm is made in which bamboo bars of diameter 20mm are used with a variation of 1 to 4 of the reinforcement area. Various tests were performed to provide the feasibility of bamboo as construction materials after 28days of curing, in which test results were found promising. The impact test shows only 25 of wear and tear. Also, bamboo reinforced concrete (BRC) without changing cross sections provided 50 axial compressive strength compared to steel reinforced concrete (SRC). However, in the tensile test, BRC outperformed SRC by providing 50 more resistance against tensile load. Authors also performed rate analysis between SRC and BRC to find that it almost reduces 18 of the cost at a small scale. Hence here, comparative research is provided, and the authors believe that it would pave the road on which forthcoming researchers will walk to reach the destination of finding an alternate, sustainable, and green construction material in the form of bamboo.