Shilong Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shilong Jin has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Jian Zhou
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
9 shared publications - Xiaoming Nie
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China
5 shared publications - Zhiyi Xiang
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China
4 shared publications - Chongbin Xi
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
3 shared publications - Qi Wang
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China
3 shared publications - Rong Huang
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China
3 shared publications
Latest Publications
- Open Access
Signal Processing Method and Evaluation Method for Weak Doppler Signal Detection
When the amplitude of the laser Doppler signal is less than that of the noise amplitude, the speed information cannot be identified. In this paper, the recognition of weak Doppler signals is accomplished by superimposing multiple-frame Doppler signals in the frequency domain and eliminating the base noise. Meanwhile, the relative prominence is defined to assess the quality of Doppler signals. The theoretical analysis and experimental results demonstrate that the relative prominence can be enhanced by more than two orders of magnitude through the stacking of 10,000 frames of Doppler signals. Moreover, this paper establishes a foundation for determining the threshold of relative prominence in practical measurements. When the relative prominence at a specific point on the spectrum is 3, there is at least a 99.08% probability that this point corresponds to the target signal.
Open AccessSignal Processing Method and Evaluation Method for Weak Doppler Signal Detection
When the amplitude of the laser Doppler signal is less than that of the noise amplitude, the speed information cannot be identified. In this paper, the recognition of weak Doppler signals is accomplished by superimposing multiple-frame Doppler signals in the frequency domain and eliminating the base noise. Meanwhile, the relative prominence is defined to assess the quality of Doppler signals. The theoretical analysis and experimental results demonstrate that the relative prominence can be enhanced by more than two orders of magnitude through the stacking of 10,000 frames of Doppler signals. Moreover, this paper establishes a foundation for determining the threshold of relative prominence in practical measurements. When the relative prominence at a specific point on the spectrum is 3, there is at least a 99.08% probability that this point corresponds to the target signal.
- 12 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (7) , 10268-10281
Further Application of Pitch Independent Laser Doppler Velocimeter in Land Vehicle Autonomous Navigation
The strapdown inertial navigation system (SINS) and pitch-independent laser Doppler velocimeter (PI-LDV) integration represents a traditional navigation architecture. However, its effectiveness in obtaining precise altitude measurements remains constrained by the PI-LDV's inherent limitation of providing only one-dimensional velocity information. This study addresses this limitation by using the optical path structure of the PI-LDV to construct a frame capable of providing two-dimensional velocity information. To achieve this objective, two innovative integration methods are proposed: a SINS/PI-LDV loosely coupled integration method and a SINS/PI-LDV tightly coupled integration method, both of which consider the influence of potential laser beam fluctuations. Furthermore, a displacement increment measurement model is developed for the SINS/PI-LDV integrated navigation system to maximize the utilization efficiency of PI-LDV measurements while reducing the impact of sensor noise and outliers. The effectiveness of the proposed methods is rigorously validated through a comprehensive series of experimental tests, including: 1) extended-duration, long-distance tests using high-precision inertial measurement units (IMUs); 2) short-duration, limitedrange evaluations using high-precision IMUs; and 3) two additional long-distance verification experiments using both high-precision and medium-precision IMUs. Experimental results demonstrate that the proposed method significantly outperforms traditional methods, particularly in height accuracy. Notably, the performance advantages become more pronounced when implementing the SINS/PI-LDV integrated navigation system with medium-precision IMUs, suggesting enhanced practical applicability in cost-sensitive applications.
- 12 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (7) , 10268-10281
Further Application of Pitch Independent Laser Doppler Velocimeter in Land Vehicle Autonomous Navigation
The strapdown inertial navigation system (SINS) and pitch-independent laser Doppler velocimeter (PI-LDV) integration represents a traditional navigation architecture. However, its effectiveness in obtaining precise altitude measurements remains constrained by the PI-LDV's inherent limitation of providing only one-dimensional velocity information. This study addresses this limitation by using the optical path structure of the PI-LDV to construct a frame capable of providing two-dimensional velocity information. To achieve this objective, two innovative integration methods are proposed: a SINS/PI-LDV loosely coupled integration method and a SINS/PI-LDV tightly coupled integration method, both of which consider the influence of potential laser beam fluctuations. Furthermore, a displacement increment measurement model is developed for the SINS/PI-LDV integrated navigation system to maximize the utilization efficiency of PI-LDV measurements while reducing the impact of sensor noise and outliers. The effectiveness of the proposed methods is rigorously validated through a comprehensive series of experimental tests, including: 1) extended-duration, long-distance tests using high-precision inertial measurement units (IMUs); 2) short-duration, limitedrange evaluations using high-precision IMUs; and 3) two additional long-distance verification experiments using both high-precision and medium-precision IMUs. Experimental results demonstrate that the proposed method significantly outperforms traditional methods, particularly in height accuracy. Notably, the performance advantages become more pronounced when implementing the SINS/PI-LDV integrated navigation system with medium-precision IMUs, suggesting enhanced practical applicability in cost-sensitive applications.
- Open Access
Positioning Method for Unmanned Aerial Vehicle (UAV) Based on Airborne Two-Dimensional Laser Doppler Velocimeter: Experiment and Dead Reckoning
In the autonomous navigation of drones, improving positioning accuracy is of significant importance to obtain highly accurate information on flight velocity. Traditional microwave and acoustic velocity measurement methods have the disadvantages of poor precision and susceptibility to interference. In this study, an unmanned aerial vehicle (UAV)-mounted two-dimensional laser Doppler velocimeter was developed and investigated, and a relevant drone flight navigation and positioning experiment was carried out. The UAV-mounted two-dimensional laser Doppler velocimeter (LDV) prototype developed in this study applies a scheme of dual-beam measurement light, sharing a focusing lens group. After process integration, the performance of the prototype was measured. It shows that a velocity measurement effect with a high signal-to-noise ratio can be achieved by using two measurement probe beams within a working distance range of 40 m–60 m. In the flight experiment, the flight trajectory calculated using the LDV-measured velocity data was compared with the global navigation satellite system (GNSS)-recorded trajectory. The result shows that LDV can achieve an odometer accuracy of 4.8‰. This study has validated the feasibility of the laser Doppler velocimeter in drone navigation and positioning, providing a novel method for reliable and high-precision velocity measurement in autonomous drone navigation.
Open AccessPositioning Method for Unmanned Aerial Vehicle (UAV) Based on Airborne Two-Dimensional Laser Doppler Velocimeter: Experiment and Dead Reckoning
In the autonomous navigation of drones, improving positioning accuracy is of significant importance to obtain highly accurate information on flight velocity. Traditional microwave and acoustic velocity measurement methods have the disadvantages of poor precision and susceptibility to interference. In this study, an unmanned aerial vehicle (UAV)-mounted two-dimensional laser Doppler velocimeter was developed and investigated, and a relevant drone flight navigation and positioning experiment was carried out. The UAV-mounted two-dimensional laser Doppler velocimeter (LDV) prototype developed in this study applies a scheme of dual-beam measurement light, sharing a focusing lens group. After process integration, the performance of the prototype was measured. It shows that a velocity measurement effect with a high signal-to-noise ratio can be achieved by using two measurement probe beams within a working distance range of 40 m–60 m. In the flight experiment, the flight trajectory calculated using the LDV-measured velocity data was compared with the global navigation satellite system (GNSS)-recorded trajectory. The result shows that LDV can achieve an odometer accuracy of 4.8‰. This study has validated the feasibility of the laser Doppler velocimeter in drone navigation and positioning, providing a novel method for reliable and high-precision velocity measurement in autonomous drone navigation.
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-15
LSTM-Assisted SINS/2D-LDV Tightly Coupled Integration Approach Using Local Outlier Factor and Adaptive Filter
The tightly coupled integration of strapdown inertial navigation system (SINS) and 2-D laser Doppler velocimeter (2D-LDV) enhances system robustness by directly using raw 2D-LDV measurements, making it well-suited for land autonomous navigation. However, this approach struggles with long-term failures of individual or both 2D-LDV beams and is sensitive to violations of the vehicle’s lateral zero-velocity constraint, which can degrade performance. To address these limitations, this article proposes a novel approach involving a long short-term memory (LSTM)-assisted SINS/2D-LDV tightly coupled integration, incorporating a local outlier factor (LOF) and an adaptive filter. The LOF is introduced to evaluate the anomaly degree of the system’s measurements, while offline datasets constructed and classified from historical normal data improve detection accuracy and reduce computational load. The LSTM is used to predict the 2D-LDV measurements and the vehicle’s lateral velocity, substituting these predictions for anomalous data to mitigate their impact. Furthermore, an adaptive filter is used to adjust the measurement noise covariance matrix of the navigation filter to avoid the adverse effects of potential errors in LSTM predictions. The effectiveness of the proposed method is validated through two groups of experiments, demonstrating satisfactory performance under both normal conditions and prolonged single- or dual-beam failures in the 2D-LDV.
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-15
LSTM-Assisted SINS/2D-LDV Tightly Coupled Integration Approach Using Local Outlier Factor and Adaptive Filter
The tightly coupled integration of strapdown inertial navigation system (SINS) and 2-D laser Doppler velocimeter (2D-LDV) enhances system robustness by directly using raw 2D-LDV measurements, making it well-suited for land autonomous navigation. However, this approach struggles with long-term failures of individual or both 2D-LDV beams and is sensitive to violations of the vehicle’s lateral zero-velocity constraint, which can degrade performance. To address these limitations, this article proposes a novel approach involving a long short-term memory (LSTM)-assisted SINS/2D-LDV tightly coupled integration, incorporating a local outlier factor (LOF) and an adaptive filter. The LOF is introduced to evaluate the anomaly degree of the system’s measurements, while offline datasets constructed and classified from historical normal data improve detection accuracy and reduce computational load. The LSTM is used to predict the 2D-LDV measurements and the vehicle’s lateral velocity, substituting these predictions for anomalous data to mitigate their impact. Furthermore, an adaptive filter is used to adjust the measurement noise covariance matrix of the navigation filter to avoid the adverse effects of potential errors in LSTM predictions. The effectiveness of the proposed method is validated through two groups of experiments, demonstrating satisfactory performance under both normal conditions and prolonged single- or dual-beam failures in the 2D-LDV.
- 27 June 2024
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 376
Influence of detector temperature on Doppler signal quality of laser Doppler velocimeter
- 27 June 2024
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 376
Influence of detector temperature on Doppler signal quality of laser Doppler velocimeter
- Open Access
- 6 June 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075513
Dual-doppler signal mixing laser doppler velocimeter
In order to reduce the requirement of system bandwidth of Laser Doppler Velocimeter (LDV), a Dual-Doppler signal mixing LDV is proposed in this paper. By transmitting two beams to the moving surface, two Doppler signals are acquired and subsequently mixed to obtain a difference frequency signal. The measured speed can be calculated based on the frequency of this difference frequency signal. This novel structure significantly reduces the bandwidth requirements on the system, which can be further diminished by minimizing the angle between the two beams of the emitted light. Moreover, it exhibits enhanced robustness against variations in launch angle and enables defocusing measurements.
- 6 June 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075513
Open AccessDual-doppler signal mixing laser doppler velocimeter
In order to reduce the requirement of system bandwidth of Laser Doppler Velocimeter (LDV), a Dual-Doppler signal mixing LDV is proposed in this paper. By transmitting two beams to the moving surface, two Doppler signals are acquired and subsequently mixed to obtain a difference frequency signal. The measured speed can be calculated based on the frequency of this difference frequency signal. This novel structure significantly reduces the bandwidth requirements on the system, which can be further diminished by minimizing the angle between the two beams of the emitted light. Moreover, it exhibits enhanced robustness against variations in launch angle and enables defocusing measurements.
- 23 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (1) , 895-908
A Robust Online Calibration Method for SINS/LDV Integrated Navigation System Based on Position Observation
The integration of strapdown inertial navigation system (SINS) with a laser Doppler velocimeter (LDV) has been proven to be a reliable technique for land vehicle localization. To enhance the positioning accuracy of the SINS/LDV integrated navigation system, accurate calibration is essential. Hence, this paper proposes a robust position observation-based calibration method for the SINS/LDV integrated navigation system. In this method, the calibration process is partitioned into two phases: coarse calibration and fine calibration. In the coarse calibration phase, an analytical calibration method is adopted, and in the fine calibration phase, a robust Kalman filter is first designed to obtain the accurate vehicle attitude and position. Then, another Kalman filter is designed using an LDV error propagation model based on position observation to further calibrate the SINS/LDV integrated navigation system. To reduce the effect of the non-holonomic constraint assumption violation on the calibration results during vehicle turning, z-gyro and LDV velocity outputs are used to detect whether the vehicle changes direction and to compensate for the lateral velocity of the LDV in the LDV frame when the vehicle changes direction. The performance of the proposed method is verified by two groups of vehicle field tests. The results show that the proposed method has higher calibration accuracy and stronger robustness than three other compared methods. In the two groups of tests with total mileage of 76.9km and 65.34km, the maximum dead reckoning horizontal positioning errors of the SINS/LDV integrated navigation system calibrated with the proposed method are 6.61m and 10.91m, respectively.
- 23 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (1) , 895-908
A Robust Online Calibration Method for SINS/LDV Integrated Navigation System Based on Position Observation
The integration of strapdown inertial navigation system (SINS) with a laser Doppler velocimeter (LDV) has been proven to be a reliable technique for land vehicle localization. To enhance the positioning accuracy of the SINS/LDV integrated navigation system, accurate calibration is essential. Hence, this paper proposes a robust position observation-based calibration method for the SINS/LDV integrated navigation system. In this method, the calibration process is partitioned into two phases: coarse calibration and fine calibration. In the coarse calibration phase, an analytical calibration method is adopted, and in the fine calibration phase, a robust Kalman filter is first designed to obtain the accurate vehicle attitude and position. Then, another Kalman filter is designed using an LDV error propagation model based on position observation to further calibrate the SINS/LDV integrated navigation system. To reduce the effect of the non-holonomic constraint assumption violation on the calibration results during vehicle turning, z-gyro and LDV velocity outputs are used to detect whether the vehicle changes direction and to compensate for the lateral velocity of the LDV in the LDV frame when the vehicle changes direction. The performance of the proposed method is verified by two groups of vehicle field tests. The results show that the proposed method has higher calibration accuracy and stronger robustness than three other compared methods. In the two groups of tests with total mileage of 76.9km and 65.34km, the maximum dead reckoning horizontal positioning errors of the SINS/LDV integrated navigation system calibrated with the proposed method are 6.61m and 10.91m, respectively.
- Open Access
- 23 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 142383-142391
Influence of Spherical Aberration on the SNR in Single-Beam Laser Doppler Velocimeter for Remote Measurement
In contrast to those deployed on land vehicles, the single-beam Laser Doppler velocimeter (LDV) used for velocity acquisition on airborne vehicles requires a focusing transmitter. The effects of spherical aberration in focusing transmitters on the distant velocity measurement of single-beam Laser Doppler velocimeters are demonstrated in this work. The calculations of the numerical simulations based on the generated theories and the subsequent experiments are in agreement with the theoretical analyses. The impact of spherical aberration on the signal-to-noise ratio (SNR) of single-beam Laser Doppler velocimeters is explained. Also illustrated is the generalized analysis for single-beam Laser Doppler velocimeters equipped with complex optics. An efficient approach for evaluating and advancing the SNR performance of single-beam Laser Doppler velocimeters used for distant velocity measurement is demonstrated. Works in this paper pave way for the design of airborne LDV.
- 23 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 142383-142391
Open AccessInfluence of Spherical Aberration on the SNR in Single-Beam Laser Doppler Velocimeter for Remote Measurement
In contrast to those deployed on land vehicles, the single-beam Laser Doppler velocimeter (LDV) used for velocity acquisition on airborne vehicles requires a focusing transmitter. The effects of spherical aberration in focusing transmitters on the distant velocity measurement of single-beam Laser Doppler velocimeters are demonstrated in this work. The calculations of the numerical simulations based on the generated theories and the subsequent experiments are in agreement with the theoretical analyses. The impact of spherical aberration on the signal-to-noise ratio (SNR) of single-beam Laser Doppler velocimeters is explained. Also illustrated is the generalized analysis for single-beam Laser Doppler velocimeters equipped with complex optics. An efficient approach for evaluating and advancing the SNR performance of single-beam Laser Doppler velocimeters used for distant velocity measurement is demonstrated. Works in this paper pave way for the design of airborne LDV.
- 14 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-13
Online Calibration Method for Pitch-Independent Laser Doppler Velocimeter Based on Improved Integrated Navigation Model
The integrated navigation system, comprising a strapdown inertial navigation system (SINS) and a laser doppler velocimeter (LDV), is a promising solution for autonomous terrestrial navigation due to its high autonomy. Pitch-independent LDV (PI-LDV) is widely used because of its high velocity measurement accuracy, small size, and independence from the vehicle pitch. However, the current use of PI-LDV is limited to the use of its one-dimensional velocity, neglecting the use of its two sub-velocities. This paper proposes three calibration models based on the two sub-velocities of PI-LDV, which can obtain accurate two-dimensional velocity information of PI-LDV. First, a loosely integrated calibration model is proposed based on the traditional calibration model for PI-LDV and the two-dimensional velocity derived from the two sub-velocities of PI-LDV. This model performs analytical coarse calibration before the filtering calibration. Second, a tightly integrated calibration model is proposed that directly estimates the error of the included angle between the two PI-LDV beams, since there is a strict mathematical relationship between the two-dimensional velocity and the included angle. Third, an ultra-tightly integrated calibration model is proposed that uses the two original beam measurements of the PI-LDV and introduces a third virtual beam information. Two groups of vehicle tests were carried out and the results verified that the accuracy of the corresponding integrated navigation of the three models proposed in this paper is much better than the traditional scheme, especially in height estimation. Moreover, the ultra-tightly integrated calibration model has the best calibration effect among the three proposed models.
- 14 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-13
Online Calibration Method for Pitch-Independent Laser Doppler Velocimeter Based on Improved Integrated Navigation Model
The integrated navigation system, comprising a strapdown inertial navigation system (SINS) and a laser doppler velocimeter (LDV), is a promising solution for autonomous terrestrial navigation due to its high autonomy. Pitch-independent LDV (PI-LDV) is widely used because of its high velocity measurement accuracy, small size, and independence from the vehicle pitch. However, the current use of PI-LDV is limited to the use of its one-dimensional velocity, neglecting the use of its two sub-velocities. This paper proposes three calibration models based on the two sub-velocities of PI-LDV, which can obtain accurate two-dimensional velocity information of PI-LDV. First, a loosely integrated calibration model is proposed based on the traditional calibration model for PI-LDV and the two-dimensional velocity derived from the two sub-velocities of PI-LDV. This model performs analytical coarse calibration before the filtering calibration. Second, a tightly integrated calibration model is proposed that directly estimates the error of the included angle between the two PI-LDV beams, since there is a strict mathematical relationship between the two-dimensional velocity and the included angle. Third, an ultra-tightly integrated calibration model is proposed that uses the two original beam measurements of the PI-LDV and introduces a third virtual beam information. Two groups of vehicle tests were carried out and the results verified that the accuracy of the corresponding integrated navigation of the three models proposed in this paper is much better than the traditional scheme, especially in height estimation. Moreover, the ultra-tightly integrated calibration model has the best calibration effect among the three proposed models.
- Open Access
- 6 October 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (10) , 1679
Simulations and Experiments on the Vibrational Characteristics of Cylindrical Resonators with First Three Harmonic Errors
A cylindrical resonator gyroscope is a kind of Coriolis gyroscope, which measures angular velocity or angle via processing of the standing wave. The symmetry of a cylindrical resonator is destroyed by different degrees of geometric nonuniformity and structural damage in the machining process. The uneven mass distribution caused by the asymmetry of the resonator can be expressed in the form of a Fourier series. The first three harmonics will reduce the anti-interference ability of the resonator to the external vibration, as well as increase the angular random walk and zero-bias drift of the gyroscope. In this paper, the frequency split of different modes caused by the first three harmonic errors and the displacement of the center of the cylindrical resonator bottom plate are obtained by simulation, and the relationship between them is explored. The experimental results on five fused silica cylindrical resonators are consistent with the simulation, confirming the linear relationship between the n = 1 frequency split and second harmonic error. A method for evaluating the first three harmonic errors of fused silica cylindrical resonators is provided.
- 6 October 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (10) , 1679
Open AccessSimulations and Experiments on the Vibrational Characteristics of Cylindrical Resonators with First Three Harmonic Errors
A cylindrical resonator gyroscope is a kind of Coriolis gyroscope, which measures angular velocity or angle via processing of the standing wave. The symmetry of a cylindrical resonator is destroyed by different degrees of geometric nonuniformity and structural damage in the machining process. The uneven mass distribution caused by the asymmetry of the resonator can be expressed in the form of a Fourier series. The first three harmonics will reduce the anti-interference ability of the resonator to the external vibration, as well as increase the angular random walk and zero-bias drift of the gyroscope. In this paper, the frequency split of different modes caused by the first three harmonic errors and the displacement of the center of the cylindrical resonator bottom plate are obtained by simulation, and the relationship between them is explored. The experimental results on five fused silica cylindrical resonators are consistent with the simulation, confirming the linear relationship between the n = 1 frequency split and second harmonic error. A method for evaluating the first three harmonic errors of fused silica cylindrical resonators is provided.