Zhiwei Yang
Zhiwei Yang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Jie Liu
School of Transportation and Logistics Engineering, Xinjiang Agricultural University, Urumqi 830052, China
5 shared publications - Bin Wang
Xinjiang Key Laboratory for Safety and Health of Transportation Infrastructure in Alpine and High-Altitude Mountainous Areas, Urumqi 830006, China
4 shared publications - Qiang Guo
Xinjiang Key Laboratory for Safety and Health of Transportation Infrastructure in Alpine and High-Altitude Mountainous Areas, Urumqi 830006, China
3 shared publications - Changtao Hu
Xinjiang Transport Planning Survey and Design Institute Co., Ltd., Urumqi 830000, China
2 shared publications - Chao Pu
Xinjiang Transport Planning Survey and Design Institute Co., Ltd., Urumqi 830011, China
2 shared publications - Haiwei Xie
School of Transportation and Logistics Engineering, Xinjiang Agricultural University, Urumqi 830052, China
2 shared publications
Latest Publications
- Open Access
Study on the Optimization of Mix Proportions for Recycled Aggregate Concrete and Its Freeze–Thaw Resistance Performance
The growing volume of construction and demolition waste has made discarded concrete a major source of urban solid waste, placing increasing pressure on land resources and the environment. Recycling waste concrete into recycled aggregate concrete (RAC) offers an effective solution for resource conservation and carbon reduction, aligning with the goals of sustainable development. However, due to the residual mortar, high porosity, and microcracks of recycled aggregates, RAC generally exhibits lower compactness, strength, and durability than conventional concrete, particularly under freeze–thaw conditions where degradation accelerates and service life decreases. To address these challenges, this study investigates the optimization of RAC mix design and its frost resistance performance for pavement base applications. An orthogonal experimental design was employed, with the water-to-binder ratio, recycled aggregate replacement ratio, and air-entraining agent dosage as key variables, while 7-day compressive strength, permeability coefficient, and rebound modulus served as evaluation indices. The influence and interaction of these factors were analyzed to determine an optimal mix meeting both mechanical and durability requirements. Rapid freeze–thaw cycling tests were then conducted to examine the variations in mass loss, relative dynamic modulus, and compressive strength retention, followed by exponential and damage variable modeling to characterize the degradation process. Results show that the water-to-binder ratio primarily governs strength, the replacement ratio affects stiffness and permeability, and the air-entraining agent significantly enhances frost resistance by improving pore structure. The optimized mix retained over 70% of its relative dynamic modulus after 300 freeze–thaw cycles, exhibiting superior durability. This work establishes a systematic framework for multi-factor optimization and durability evaluation of RAC, providing theoretical and practical guidance for its application in cold-region pavement bases.
Open AccessStudy on the Optimization of Mix Proportions for Recycled Aggregate Concrete and Its Freeze–Thaw Resistance Performance
The growing volume of construction and demolition waste has made discarded concrete a major source of urban solid waste, placing increasing pressure on land resources and the environment. Recycling waste concrete into recycled aggregate concrete (RAC) offers an effective solution for resource conservation and carbon reduction, aligning with the goals of sustainable development. However, due to the residual mortar, high porosity, and microcracks of recycled aggregates, RAC generally exhibits lower compactness, strength, and durability than conventional concrete, particularly under freeze–thaw conditions where degradation accelerates and service life decreases. To address these challenges, this study investigates the optimization of RAC mix design and its frost resistance performance for pavement base applications. An orthogonal experimental design was employed, with the water-to-binder ratio, recycled aggregate replacement ratio, and air-entraining agent dosage as key variables, while 7-day compressive strength, permeability coefficient, and rebound modulus served as evaluation indices. The influence and interaction of these factors were analyzed to determine an optimal mix meeting both mechanical and durability requirements. Rapid freeze–thaw cycling tests were then conducted to examine the variations in mass loss, relative dynamic modulus, and compressive strength retention, followed by exponential and damage variable modeling to characterize the degradation process. Results show that the water-to-binder ratio primarily governs strength, the replacement ratio affects stiffness and permeability, and the air-entraining agent significantly enhances frost resistance by improving pore structure. The optimized mix retained over 70% of its relative dynamic modulus after 300 freeze–thaw cycles, exhibiting superior durability. This work establishes a systematic framework for multi-factor optimization and durability evaluation of RAC, providing theoretical and practical guidance for its application in cold-region pavement bases.
- Open Access
- 26 March 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (7) , 736
Impact Pathways of Environmental Factors on the Spatiotemporal Variations in Surface Soil Moisture in Tianshan Mountains, China
Soil moisture (SM) in the mountains is critical for agropastoral productivity, and it is subject to both large-scale climate gradients and fine-scale effects of terrain, vegetation and soil. However, how the climate, topography, soil and vegetation factors impact surface SM spatiotemporal dynamics remains elusive in mountainous terrains, due to their complex interactions. Based on multi-source datasets, this study employs the structural equation model to investigate the impact pathways of climate and vegetation factors on annual surface SM dynamics from the year 2000 to 2022 in the Tianshan Mountains of China (TS). We also utilize the factor and interaction detectors of Geographical Detector to explore the individual and interactive effects of climate, topography, soil and vegetation factors on the spatial pattern of the annual surface SM. Moreover, their integrated impacts on the spatiotemporal dynamics of annual surface SM were investigated based on the explanatory power from the factor detector and total effects from structural equation modeling. The results showed that the multi-year average surface SM was 0.21 m3·m−3 for the whole region, with greater values in areas with dense vegetation and high elevation. Annual surface SM exhibited significant increasing trends across different land cover classifications and elevation zones, which was directly influenced by vegetation greenness enhancement. Precipitation (PRE) and relative humidity (RH) also significantly influenced the temporal variations in surface SM through their indirect effect on vegetation greenness, while these indirect effects were much lower than the direct effect of vegetation greenness. RH, PRE and surface net solar radiation (SSR) showed strong individual and interactive effects on the spatial distribution of surface SM, particularly the interactive effects of RH and PRE with wind speed (WS). Surface SM was highly sensitive to RH and PRE in the central TS. Overall, vegetation greenness, PRE and RH were the main drivers of surface SM variations across both temporal and spatial scales, while SSR, total evaporation and WS primarily shaped its spatial distribution. These insights enhance our understanding of land–atmosphere interactions in mountainous areas and provide scientific references for sustainable agropastoral water resource management under global warming.
- 26 March 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (7) , 736
Open AccessImpact Pathways of Environmental Factors on the Spatiotemporal Variations in Surface Soil Moisture in Tianshan Mountains, China
Soil moisture (SM) in the mountains is critical for agropastoral productivity, and it is subject to both large-scale climate gradients and fine-scale effects of terrain, vegetation and soil. However, how the climate, topography, soil and vegetation factors impact surface SM spatiotemporal dynamics remains elusive in mountainous terrains, due to their complex interactions. Based on multi-source datasets, this study employs the structural equation model to investigate the impact pathways of climate and vegetation factors on annual surface SM dynamics from the year 2000 to 2022 in the Tianshan Mountains of China (TS). We also utilize the factor and interaction detectors of Geographical Detector to explore the individual and interactive effects of climate, topography, soil and vegetation factors on the spatial pattern of the annual surface SM. Moreover, their integrated impacts on the spatiotemporal dynamics of annual surface SM were investigated based on the explanatory power from the factor detector and total effects from structural equation modeling. The results showed that the multi-year average surface SM was 0.21 m3·m−3 for the whole region, with greater values in areas with dense vegetation and high elevation. Annual surface SM exhibited significant increasing trends across different land cover classifications and elevation zones, which was directly influenced by vegetation greenness enhancement. Precipitation (PRE) and relative humidity (RH) also significantly influenced the temporal variations in surface SM through their indirect effect on vegetation greenness, while these indirect effects were much lower than the direct effect of vegetation greenness. RH, PRE and surface net solar radiation (SSR) showed strong individual and interactive effects on the spatial distribution of surface SM, particularly the interactive effects of RH and PRE with wind speed (WS). Surface SM was highly sensitive to RH and PRE in the central TS. Overall, vegetation greenness, PRE and RH were the main drivers of surface SM variations across both temporal and spatial scales, while SSR, total evaporation and WS primarily shaped its spatial distribution. These insights enhance our understanding of land–atmosphere interactions in mountainous areas and provide scientific references for sustainable agropastoral water resource management under global warming.
- Open Access
- 8 January 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1720538
Optimizing subgrade design for blowing snow prevention: a CFD-based parametric study
Blowing snow poses a serious threat to highway traffic safety, and appropriate subgrade cross-sectional designs can effectively mitigate the impacts. Systematic studies on how to optimize subgrade structural design to maximize the mitigation of blowing snow disasters are still lacking. To address this, this paper investigates the fundamental parameters of two typical subgrades: embankments and cuttings. To investigate the influence of varying subgrade cross-sectional configurations and slope ratios on the effectiveness of blowing snow control with a focus on single-parameter variations, this study employs CFD (computational fluid dynamics) simulations to analyze velocity contour distributions, snow accumulation patterns, and vertical wind velocity profiles around the models. The results demonstrate that implementing gentle slopes for subgrades (including both embankments and cuttings) or appropriately widening snow accumulation platforms of the cutting can effectively mitigate snow deposition on pavement surfaces. When wind flows through the cutting, the overall wind velocity profile exhibits a W-shaped distribution pattern. Meanwhile, variations in its depth and slope ratio both exhibit positive correlations with road snow accumulation. Furthermore, three embankment models with cross-sectional dimensions identical to those of field conditions but varying heights are established. Through combined field monitoring tests and numerical simulations, wind velocities are systematically measured at ten vertical elevations for all critical locations. Comparative results demonstrate that the flow field distribution patterns and variation trends observed in the field are highly consistent with the numerical simulation results, thereby validating the reliability of the numerical model. This research elucidates the underlying physical mechanisms of how subgrade structural parameters mitigate the impact of snowdrift disasters, providing scientifically validated references for hazard reduction along transportation corridors.
- 8 January 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 13, 1720538
Open AccessOptimizing subgrade design for blowing snow prevention: a CFD-based parametric study
Blowing snow poses a serious threat to highway traffic safety, and appropriate subgrade cross-sectional designs can effectively mitigate the impacts. Systematic studies on how to optimize subgrade structural design to maximize the mitigation of blowing snow disasters are still lacking. To address this, this paper investigates the fundamental parameters of two typical subgrades: embankments and cuttings. To investigate the influence of varying subgrade cross-sectional configurations and slope ratios on the effectiveness of blowing snow control with a focus on single-parameter variations, this study employs CFD (computational fluid dynamics) simulations to analyze velocity contour distributions, snow accumulation patterns, and vertical wind velocity profiles around the models. The results demonstrate that implementing gentle slopes for subgrades (including both embankments and cuttings) or appropriately widening snow accumulation platforms of the cutting can effectively mitigate snow deposition on pavement surfaces. When wind flows through the cutting, the overall wind velocity profile exhibits a W-shaped distribution pattern. Meanwhile, variations in its depth and slope ratio both exhibit positive correlations with road snow accumulation. Furthermore, three embankment models with cross-sectional dimensions identical to those of field conditions but varying heights are established. Through combined field monitoring tests and numerical simulations, wind velocities are systematically measured at ten vertical elevations for all critical locations. Comparative results demonstrate that the flow field distribution patterns and variation trends observed in the field are highly consistent with the numerical simulation results, thereby validating the reliability of the numerical model. This research elucidates the underlying physical mechanisms of how subgrade structural parameters mitigate the impact of snowdrift disasters, providing scientifically validated references for hazard reduction along transportation corridors.
- Open Access
- 31 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11631
Avalanche Susceptibility Mapping with Explainable Machine Learning: A Case Study of the Kanas Scenic Transportation Corridor in the Altay Mountains, China
Avalanche susceptibility mapping is vital for disaster prevention and infrastructure safety in cold mountain regions under climate change. Traditional machine learning (ML) approaches have demonstrated strong predictive capacity, yet their limited interpretability and difficulty in identifying threshold effects hinder their broader application in geohazard risk management. To overcome these limitations, this study develops an explainable ML framework that integrates remote sensing data, topographic and climatic variables, and SHapley Additive exPlanations for the Kanas Scenic Area transportation corridor in the Chinese Altay Mountains. The framework evaluates five classifiers: Random Forest, XGBoost, LightGBM, Soft Voting, and Stacking, and using sixteen conditioning factors that capture topography, climate, vegetation, and anthropogenic influences. Results show that LightGBM achieved the best performance, with an AUC of 0.9428, accuracy of 0.8681, F1-score of 0.8750, and Cohen’s kappa of 0.7366. To ensure transparency for risk decisions, SHAP analyses identify Terrain Ruggedness Index, wind speed, slope, aspect and NDVI as dominant drivers. The dependence plots reveal actionable thresholds and interactions, including a TRI plateau near 5–7, a slope peak between 30° and 40°, a wind effect that saturates above about 2.5 m s−1, and a near-river high-risk belt within 0–2 km. The five-class map aligns with independent field observations, with more than three quarters of events falling in moderate to very high zones. By integrating explainable ML with remote sensing, this study advances avalanche risk assessment in cold region transportation corridors and strengthens the robustness of regional susceptibility mapping.
- 31 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11631
Open AccessAvalanche Susceptibility Mapping with Explainable Machine Learning: A Case Study of the Kanas Scenic Transportation Corridor in the Altay Mountains, China
Avalanche susceptibility mapping is vital for disaster prevention and infrastructure safety in cold mountain regions under climate change. Traditional machine learning (ML) approaches have demonstrated strong predictive capacity, yet their limited interpretability and difficulty in identifying threshold effects hinder their broader application in geohazard risk management. To overcome these limitations, this study develops an explainable ML framework that integrates remote sensing data, topographic and climatic variables, and SHapley Additive exPlanations for the Kanas Scenic Area transportation corridor in the Chinese Altay Mountains. The framework evaluates five classifiers: Random Forest, XGBoost, LightGBM, Soft Voting, and Stacking, and using sixteen conditioning factors that capture topography, climate, vegetation, and anthropogenic influences. Results show that LightGBM achieved the best performance, with an AUC of 0.9428, accuracy of 0.8681, F1-score of 0.8750, and Cohen’s kappa of 0.7366. To ensure transparency for risk decisions, SHAP analyses identify Terrain Ruggedness Index, wind speed, slope, aspect and NDVI as dominant drivers. The dependence plots reveal actionable thresholds and interactions, including a TRI plateau near 5–7, a slope peak between 30° and 40°, a wind effect that saturates above about 2.5 m s−1, and a near-river high-risk belt within 0–2 km. The five-class map aligns with independent field observations, with more than three quarters of events falling in moderate to very high zones. By integrating explainable ML with remote sensing, this study advances avalanche risk assessment in cold region transportation corridors and strengthens the robustness of regional susceptibility mapping.
- Open Access
Evaluation of Constitutive Models for Low-Temperature Performance of High-Modulus Modified Asphalt: A BBR Test-Based Study
High-modulus asphalt, with its excellent fatigue resistance and high-temperature resistance, is gradually becoming a preferred material for the development of durable asphalt pavements. However, its poor low-temperature performance has become one of the key bottlenecks restricting its wide application. In recent years, in-depth analysis of the mechanism underlying the changes in the low-temperature performance of high-modulus asphalt has gradually become a research focus in the field of asphalt pavements. Accordingly, this study selected four representative high-modulus asphalts, conducted bending beam rheometer (BBR) tests to obtain their low-temperature creep parameters, and used three viscoelastic constitutive models to investigate their low-temperature constitutive relationships. Grey relational analysis (GRA) was further applied to evaluate the models. The results show that, when evaluating the low-temperature performance of high-modulus asphalt, the elastic and viscous parameters variation laws, for the three-parameter solid (TPS) model and four-parameter solid (FPS) model, are not obvious and have large fluctuations, and the accuracy of the fitting curves is relatively low, while the Burgers model has extremely high fitting accuracy, with small parameter fluctuations and significant regularity. The GRA model reveals that the Burgers model is more suitable than the TPS and FPS models for describing the low-temperature creep behavior of high-modulus asphalt, which further confirms the reliability of using the Burgers model to evaluate the low-temperature performance of high-modulus asphalt.
Open AccessEvaluation of Constitutive Models for Low-Temperature Performance of High-Modulus Modified Asphalt: A BBR Test-Based Study
High-modulus asphalt, with its excellent fatigue resistance and high-temperature resistance, is gradually becoming a preferred material for the development of durable asphalt pavements. However, its poor low-temperature performance has become one of the key bottlenecks restricting its wide application. In recent years, in-depth analysis of the mechanism underlying the changes in the low-temperature performance of high-modulus asphalt has gradually become a research focus in the field of asphalt pavements. Accordingly, this study selected four representative high-modulus asphalts, conducted bending beam rheometer (BBR) tests to obtain their low-temperature creep parameters, and used three viscoelastic constitutive models to investigate their low-temperature constitutive relationships. Grey relational analysis (GRA) was further applied to evaluate the models. The results show that, when evaluating the low-temperature performance of high-modulus asphalt, the elastic and viscous parameters variation laws, for the three-parameter solid (TPS) model and four-parameter solid (FPS) model, are not obvious and have large fluctuations, and the accuracy of the fitting curves is relatively low, while the Burgers model has extremely high fitting accuracy, with small parameter fluctuations and significant regularity. The GRA model reveals that the Burgers model is more suitable than the TPS and FPS models for describing the low-temperature creep behavior of high-modulus asphalt, which further confirms the reliability of using the Burgers model to evaluate the low-temperature performance of high-modulus asphalt.
- Open Access
- 8 August 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (16) , 2755
Dynamic Evolution and Triggering Mechanisms of the Simutasi Peak Avalanche in the Chinese Tianshan Mountains: A Multi-Source Data Fusion Approach
Avalanches occur frequently in mountainous areas and pose significant threats to roads and infrastructure. Clarifying how terrain conditions influence avalanche initiation and movement is critical to improving hazard assessment and response strategies. This study focused on a wet-snow slab avalanche that occurred on 26 March 2024, in the Simutas region of the northern Tianshan Mountains, Xinjiang, China. The authors combined remote sensing imagery, high-resolution meteorological station observations, field investigations, and numerical simulations (RAMMS::Avalanche) to analyze the avalanche initiation mechanism, dynamic behavior, and path recurrence characteristics. Results indicated that persistent heavy snowfall, rapid warming, and substantial daily temperature fluctuations triggered this avalanche. The predominant southeasterly (SE) winds and the northwest-facing (NW) shaded slopes created favorable leeward snow deposition conditions, increasing snowpack instability. High-resolution meteorological observations provided detailed wind, temperature, and precipitation data near the avalanche release zone, clearly capturing snowpack evolution and meteorological conditions before avalanche initiation. Numerical simulations showed a maximum avalanche flow velocity of 19.22 m/s, maximum flow depth of 12.42 m, and peak dynamic pressure of 129.3 kPa. The simulated avalanche deposition area and depth closely matched field observations. Multi-temporal remote sensing images indicated that avalanche paths in this area remained spatially consistent over time, with recurrence intervals of approximately 2–3 years. The findings highlight the combined role of local meteorological processes and terrain factors in controlling avalanche initiation and dynamics. This research confirmed the effectiveness of integrating remote sensing data, high-resolution meteorological observations, and dynamic modeling, providing scientific evidence for avalanche risk assessment and disaster mitigation in mountain regions.
- 8 August 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (16) , 2755
Open AccessDynamic Evolution and Triggering Mechanisms of the Simutasi Peak Avalanche in the Chinese Tianshan Mountains: A Multi-Source Data Fusion Approach
Avalanches occur frequently in mountainous areas and pose significant threats to roads and infrastructure. Clarifying how terrain conditions influence avalanche initiation and movement is critical to improving hazard assessment and response strategies. This study focused on a wet-snow slab avalanche that occurred on 26 March 2024, in the Simutas region of the northern Tianshan Mountains, Xinjiang, China. The authors combined remote sensing imagery, high-resolution meteorological station observations, field investigations, and numerical simulations (RAMMS::Avalanche) to analyze the avalanche initiation mechanism, dynamic behavior, and path recurrence characteristics. Results indicated that persistent heavy snowfall, rapid warming, and substantial daily temperature fluctuations triggered this avalanche. The predominant southeasterly (SE) winds and the northwest-facing (NW) shaded slopes created favorable leeward snow deposition conditions, increasing snowpack instability. High-resolution meteorological observations provided detailed wind, temperature, and precipitation data near the avalanche release zone, clearly capturing snowpack evolution and meteorological conditions before avalanche initiation. Numerical simulations showed a maximum avalanche flow velocity of 19.22 m/s, maximum flow depth of 12.42 m, and peak dynamic pressure of 129.3 kPa. The simulated avalanche deposition area and depth closely matched field observations. Multi-temporal remote sensing images indicated that avalanche paths in this area remained spatially consistent over time, with recurrence intervals of approximately 2–3 years. The findings highlight the combined role of local meteorological processes and terrain factors in controlling avalanche initiation and dynamics. This research confirmed the effectiveness of integrating remote sensing data, high-resolution meteorological observations, and dynamic modeling, providing scientific evidence for avalanche risk assessment and disaster mitigation in mountain regions.
- Open Access
- 4 July 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (7) , 817
Avalanche Hazard Dynamics and Causal Analysis Along China’s G219 Corridor: A Case Study of the Wenquan–Khorgas Section
Investigating avalanche hazards is a fundamental preliminary task in avalanche research. This work is critically important for establishing avalanche warning systems and designing mitigation measures. Primary research data originated from field investigations and UAV aerial surveys, with avalanche counts and timing identified through image interpretation. Snowpack properties were primarily acquired via in situ field testing within the study area. Methodologically, statistical modeling and RAMMS::AVALANCHE simulations revealed spatiotemporal and dynamic characteristics of avalanches. Subsequent application of the Certainty Factor (CF) model and sensitivity analysis determined dominant controlling factors and quantified zonal influence intensity for each parameter. This study, utilizing field reconnaissance and drone aerial photography, identified 86 avalanche points in the study area. We used field tests and weather data to run the RAMMS::AVALANCHE model. Then, we categorized and summarized regional avalanche characteristics using both field surveys and simulation results. Furthermore, the Certainty Factor Model (CFM) and the parameter Sensitivity Index (Sa) were applied to assess the influence of elevation, slope gradient, aspect, and maximum snow depth on the severity of avalanche disasters. The results indicate the following: (1) Avalanches exhibit pronounced spatiotemporal concentration: temporally, they cluster between February and March and during 13:00–18:00 daily; spatially, they concentrate within the 2100–3000 m elevation zone. Chute-confined avalanches dominate the region, comprising 73.26% of total events; most chute-confined avalanches feature multiple release areas; therefore the number of release areas exceeds avalanche points; in terms of scale, medium-to-large-scale avalanches dominate, accounting for 86.5% of total avalanches. (2) RAMMS::AVALANCHE simulations yielded the following maximum values for the region: flow height = 15.43 m, flow velocity = 47.6 m/s, flow pressure = 679.79 kPa, and deposition height = 10.3 m. Compared to chute-confined avalanches, unconfined slope avalanches exhibit higher flow velocities and pressures, posing greater hazard potential. (3) The Certainty Factor Model and Sensitivity Index identify elevation, slope gradient, and maximum snow depth as the key drivers of avalanches in the study area. Their relative impact ranks as follows: maximum snow depth > elevation > slope gradient > aspect. The sensitivity index values were 1.536, 1.476, 1.362, and 0.996, respectively. The findings of this study provide a scientific basis for further research on avalanche hazards, the development of avalanche warning systems, and the design of avalanche mitigation projects in the study area.
- 4 July 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (7) , 817
Open AccessAvalanche Hazard Dynamics and Causal Analysis Along China’s G219 Corridor: A Case Study of the Wenquan–Khorgas Section
Investigating avalanche hazards is a fundamental preliminary task in avalanche research. This work is critically important for establishing avalanche warning systems and designing mitigation measures. Primary research data originated from field investigations and UAV aerial surveys, with avalanche counts and timing identified through image interpretation. Snowpack properties were primarily acquired via in situ field testing within the study area. Methodologically, statistical modeling and RAMMS::AVALANCHE simulations revealed spatiotemporal and dynamic characteristics of avalanches. Subsequent application of the Certainty Factor (CF) model and sensitivity analysis determined dominant controlling factors and quantified zonal influence intensity for each parameter. This study, utilizing field reconnaissance and drone aerial photography, identified 86 avalanche points in the study area. We used field tests and weather data to run the RAMMS::AVALANCHE model. Then, we categorized and summarized regional avalanche characteristics using both field surveys and simulation results. Furthermore, the Certainty Factor Model (CFM) and the parameter Sensitivity Index (Sa) were applied to assess the influence of elevation, slope gradient, aspect, and maximum snow depth on the severity of avalanche disasters. The results indicate the following: (1) Avalanches exhibit pronounced spatiotemporal concentration: temporally, they cluster between February and March and during 13:00–18:00 daily; spatially, they concentrate within the 2100–3000 m elevation zone. Chute-confined avalanches dominate the region, comprising 73.26% of total events; most chute-confined avalanches feature multiple release areas; therefore the number of release areas exceeds avalanche points; in terms of scale, medium-to-large-scale avalanches dominate, accounting for 86.5% of total avalanches. (2) RAMMS::AVALANCHE simulations yielded the following maximum values for the region: flow height = 15.43 m, flow velocity = 47.6 m/s, flow pressure = 679.79 kPa, and deposition height = 10.3 m. Compared to chute-confined avalanches, unconfined slope avalanches exhibit higher flow velocities and pressures, posing greater hazard potential. (3) The Certainty Factor Model and Sensitivity Index identify elevation, slope gradient, and maximum snow depth as the key drivers of avalanches in the study area. Their relative impact ranks as follows: maximum snow depth > elevation > slope gradient > aspect. The sensitivity index values were 1.536, 1.476, 1.362, and 0.996, respectively. The findings of this study provide a scientific basis for further research on avalanche hazards, the development of avalanche warning systems, and the design of avalanche mitigation projects in the study area.
- Open Access
- 9 September 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (9) , 1096
Snow Avalanche Susceptibility Mapping of Transportation Corridors Based on Coupled Certainty Factor and Geodetector Models
Avalanche susceptibility assessment is a core aspect of regional avalanche early warning and risk analysis and is of great significance for disaster prevention and mitigation on proposed highways. Using sky–ground integration investigation, 83 avalanche points within the G219 Wen Quan to Horgos transportation corridor were identified, and the avalanche hazard susceptibility of the transportation corridor was partitioned using the certainty factor (CF) model and the coupled coefficient of the certainty factor–Geodetector (CF-GD) model. The CF model analysis presented nine elements of natural conditions which influence avalanche development; then, by applying the Geodetector for each of the factors, a weighting coefficient was given depending on its importance for avalanche occurrence. The results demonstrate the following: (1) According to the receiver operating characteristic (ROC) curve used to verify the accuracy, the area under the ROC curve (AUC) value for the CF-GD coupled model is 0.889, which is better than the value of 0.836 of the CF model’s evaluation accuracy, and the coupled model improves the accuracy by about 6.34% compared with the single model, indicating that the coupled model is more accurate. The results provide avalanche prevention and control recommendations for the G219 Wen Quan to Horgos transportation corridor. (2) The slope orientation, slope gradient, and mean winter temperature gradient are the main factors for avalanche development in the study area. (3) The results were validated based on the AUC values. The AUCs of the CF-GD coupled model and the CF model were 0.889 and 0.836, respectively. The accuracy of the coupled model was improved by about 6.34% compared to the single model, and the coupled CF-GD model was more accurate. The results provide avalanche control recommendations for the G219 Wen Quan to Horgos transportation corridor.
- 9 September 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (9) , 1096
Open AccessSnow Avalanche Susceptibility Mapping of Transportation Corridors Based on Coupled Certainty Factor and Geodetector Models
Avalanche susceptibility assessment is a core aspect of regional avalanche early warning and risk analysis and is of great significance for disaster prevention and mitigation on proposed highways. Using sky–ground integration investigation, 83 avalanche points within the G219 Wen Quan to Horgos transportation corridor were identified, and the avalanche hazard susceptibility of the transportation corridor was partitioned using the certainty factor (CF) model and the coupled coefficient of the certainty factor–Geodetector (CF-GD) model. The CF model analysis presented nine elements of natural conditions which influence avalanche development; then, by applying the Geodetector for each of the factors, a weighting coefficient was given depending on its importance for avalanche occurrence. The results demonstrate the following: (1) According to the receiver operating characteristic (ROC) curve used to verify the accuracy, the area under the ROC curve (AUC) value for the CF-GD coupled model is 0.889, which is better than the value of 0.836 of the CF model’s evaluation accuracy, and the coupled model improves the accuracy by about 6.34% compared with the single model, indicating that the coupled model is more accurate. The results provide avalanche prevention and control recommendations for the G219 Wen Quan to Horgos transportation corridor. (2) The slope orientation, slope gradient, and mean winter temperature gradient are the main factors for avalanche development in the study area. (3) The results were validated based on the AUC values. The AUCs of the CF-GD coupled model and the CF model were 0.889 and 0.836, respectively. The accuracy of the coupled model was improved by about 6.34% compared to the single model, and the coupled CF-GD model was more accurate. The results provide avalanche control recommendations for the G219 Wen Quan to Horgos transportation corridor.
- Open Access
- 15 September 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (9) , 1439
A Study on Avalanche-Triggering Factors and Activity Characteristics in Aerxiangou, West Tianshan Mountains, China
Through analyzing the triggering factors and activity characteristics of avalanches in Aerxiangou in the Western Tianshan Mountains, the formation and disaster-causing process of avalanches were studied to provide theoretical support and a scientific basis for avalanche disaster prevention. In this paper, based on remote sensing interpretation and field investigation, a spatial distribution map of avalanches was established, and the induced and triggering factors in disaster-prone environments were analyzed using the certainty factor model. The degree of influence (E) of the disaster-causing factors on avalanche triggering was quantified, and the main control conditions conducive to avalanche occurrence in different periods were obtained. The RAMMS-avalanche model was used to analyze the activity characteristics at points where multiple avalanches occurred. Research results: (1) The E values of the average temperature, average snowfall, and surface roughness in February were significantly higher than those of other hazard-causing factors, reaching 1.83 and 1.71, respectively, indicating strong control. The E values of the surface cutting degree, average temperature, and average snow depth in March were all higher than 1.8, indicating that these control factors were more prominent than the other factors. In contrast, there were four hazard-causing factors with E values higher than 1.5 in April: the mean temperature, slope, surface roughness, and mean wind speed, with clear control. (2) Under the influence of the different hazard-causing factors, the types of avalanches from February–April mainly included new full-layer avalanches, surface avalanches, and full-layer wet avalanches. (3) In the RAMMS-avalanche simulation test, considering the deposition effect, compared to the previous avalanche movement path, the secondary avalanche flow accumulation area impact range changes were slight, while the movement area within the avalanche path changes was large, as were the different categories of avalanches and their different movement characteristic values. Overall, wet snow avalanches are more hazardous, and the impact force is larger. The new snow avalanches start in a short period, the sliding rate is fast, and the avalanche sliding surface (full-snow surface and face-snow) of the difference is mainly manifested in the differences in the value of the flow height.
- 15 September 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (9) , 1439
Open AccessA Study on Avalanche-Triggering Factors and Activity Characteristics in Aerxiangou, West Tianshan Mountains, China
Through analyzing the triggering factors and activity characteristics of avalanches in Aerxiangou in the Western Tianshan Mountains, the formation and disaster-causing process of avalanches were studied to provide theoretical support and a scientific basis for avalanche disaster prevention. In this paper, based on remote sensing interpretation and field investigation, a spatial distribution map of avalanches was established, and the induced and triggering factors in disaster-prone environments were analyzed using the certainty factor model. The degree of influence (E) of the disaster-causing factors on avalanche triggering was quantified, and the main control conditions conducive to avalanche occurrence in different periods were obtained. The RAMMS-avalanche model was used to analyze the activity characteristics at points where multiple avalanches occurred. Research results: (1) The E values of the average temperature, average snowfall, and surface roughness in February were significantly higher than those of other hazard-causing factors, reaching 1.83 and 1.71, respectively, indicating strong control. The E values of the surface cutting degree, average temperature, and average snow depth in March were all higher than 1.8, indicating that these control factors were more prominent than the other factors. In contrast, there were four hazard-causing factors with E values higher than 1.5 in April: the mean temperature, slope, surface roughness, and mean wind speed, with clear control. (2) Under the influence of the different hazard-causing factors, the types of avalanches from February–April mainly included new full-layer avalanches, surface avalanches, and full-layer wet avalanches. (3) In the RAMMS-avalanche simulation test, considering the deposition effect, compared to the previous avalanche movement path, the secondary avalanche flow accumulation area impact range changes were slight, while the movement area within the avalanche path changes was large, as were the different categories of avalanches and their different movement characteristic values. Overall, wet snow avalanches are more hazardous, and the impact force is larger. The new snow avalanches start in a short period, the sliding rate is fast, and the avalanche sliding surface (full-snow surface and face-snow) of the difference is mainly manifested in the differences in the value of the flow height.